Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma

Pull slave-dmaengine updates from Vinod Koul:
 "This pull brings:
   - Andy's DW driver updates
   - Guennadi's sh driver updates
   - Pl08x driver fixes from Tomasz & Alban
   - Improvements to mmp_pdma by Daniel
   - TI EDMA fixes by Joel
   - New drivers:
     - Hisilicon k3dma driver
     - Renesas rcar dma driver
  - New API for publishing slave driver capablities
  - Various fixes across the subsystem by Andy, Jingoo, Sachin etc..."

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (94 commits)
  dma: edma: Remove limits on number of slots
  dma: edma: Leave linked to Null slot instead of DUMMY slot
  dma: edma: Find missed events and issue them
  ARM: edma: Add function to manually trigger an EDMA channel
  dma: edma: Write out and handle MAX_NR_SG at a given time
  dma: edma: Setup parameters to DMA MAX_NR_SG at a time
  dmaengine: pl330: use dma_set_max_seg_size to set the sg limit
  dmaengine: dma_slave_caps: remove sg entries
  dma: replace devm_request_and_ioremap by devm_ioremap_resource
  dma: ste_dma40: Fix potential null pointer dereference
  dma: ste_dma40: Remove duplicate const
  dma: imx-dma: Remove redundant NULL check
  dma: dmagengine: fix function names in comments
  dma: add driver for R-Car HPB-DMAC
  dma: k3dma: use devm_ioremap_resource() instead of devm_request_and_ioremap()
  dma: imx-sdma: Staticize sdma_driver_data structures
  pch_dma: Add MODULE_DEVICE_TABLE
  dmaengine: PL08x: Add cyclic transfer support
  dmaengine: PL08x: Fix reading the byte count in cctl
  dmaengine: PL08x: Add support for different maximum transfer size
  ...

1 files changed, 363 insertions, 138 deletions

diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c
index bff41d4848e5..fce46c5bf1c7 100644
--- a/drivers/dma/amba-pl08x.c
+++ b/drivers/dma/amba-pl08x.c
@@ -24,6 +24,7 @@
  *
  * Documentation: ARM DDI 0196G == PL080
  * Documentation: ARM DDI 0218E == PL081
+ * Documentation: S3C6410 User's Manual == PL080S
  *
  * PL080 & PL081 both have 16 sets of DMA signals that can be routed to any
  * channel.
@@ -36,6 +37,14 @@
  *
  * The PL080 has a dual bus master, PL081 has a single master.
  *
+ * PL080S is a version modified by Samsung and used in S3C64xx SoCs.
+ * It differs in following aspects:
+ * - CH_CONFIG register at different offset,
+ * - separate CH_CONTROL2 register for transfer size,
+ * - bigger maximum transfer size,
+ * - 8-word aligned LLI, instead of 4-word, due to extra CCTL2 word,
+ * - no support for peripheral flow control.
+ *
  * Memory to peripheral transfer may be visualized as
  *	Get data from memory to DMAC
  *	Until no data left
@@ -64,10 +73,7 @@
  *  - Peripheral flow control: the transfer size is ignored (and should be
  *    zero).  The data is transferred from the current LLI entry, until
  *    after the final transfer signalled by LBREQ or LSREQ.  The DMAC
- *    will then move to the next LLI entry.
- *
- * Global TODO:
- * - Break out common code from arch/arm/mach-s3c64xx and share
+ *    will then move to the next LLI entry. Unsupported by PL080S.
  */
 #include <linux/amba/bus.h>
 #include <linux/amba/pl08x.h>
@@ -100,24 +106,16 @@ struct pl08x_driver_data;
  * @nomadik: whether the channels have Nomadik security extension bits
  *	that need to be checked for permission before use and some registers are
  *	missing
+ * @pl080s: whether this version is a PL080S, which has separate register and
+ *	LLI word for transfer size.
  */
 struct vendor_data {
+	u8 config_offset;
 	u8 channels;
 	bool dualmaster;
 	bool nomadik;
-};
-
-/*
- * PL08X private data structures
- * An LLI struct - see PL08x TRM.  Note that next uses bit[0] as a bus bit,
- * start & end do not - their bus bit info is in cctl.  Also note that these
- * are fixed 32-bit quantities.
- */
-struct pl08x_lli {
-	u32 src;
-	u32 dst;
-	u32 lli;
-	u32 cctl;
+	bool pl080s;
+	u32 max_transfer_size;
 };
 
 /**
@@ -147,6 +145,7 @@ struct pl08x_bus_data {
 struct pl08x_phy_chan {
 	unsigned int id;
 	void __iomem *base;
+	void __iomem *reg_config;
 	spinlock_t lock;
 	struct pl08x_dma_chan *serving;
 	bool locked;
@@ -176,12 +175,13 @@ struct pl08x_sg {
  * @ccfg: config reg values for current txd
  * @done: this marks completed descriptors, which should not have their
  *   mux released.
+ * @cyclic: indicate cyclic transfers
  */
 struct pl08x_txd {
 	struct virt_dma_desc vd;
 	struct list_head dsg_list;
 	dma_addr_t llis_bus;
-	struct pl08x_lli *llis_va;
+	u32 *llis_va;
 	/* Default cctl value for LLIs */
 	u32 cctl;
 	/*
@@ -190,6 +190,7 @@ struct pl08x_txd {
 	 */
 	u32 ccfg;
 	bool done;
+	bool cyclic;
 };
 
 /**
@@ -265,17 +266,29 @@ struct pl08x_driver_data {
 	struct dma_pool *pool;
 	u8 lli_buses;
 	u8 mem_buses;
+	u8 lli_words;
 };
 
 /*
  * PL08X specific defines
  */
 
-/* Size (bytes) of each LLI buffer allocated for one transfer */
-# define PL08X_LLI_TSFR_SIZE	0x2000
+/* The order of words in an LLI. */
+#define PL080_LLI_SRC		0
+#define PL080_LLI_DST		1
+#define PL080_LLI_LLI		2
+#define PL080_LLI_CCTL		3
+#define PL080S_LLI_CCTL2	4
+
+/* Total words in an LLI. */
+#define PL080_LLI_WORDS		4
+#define PL080S_LLI_WORDS	8
 
-/* Maximum times we call dma_pool_alloc on this pool without freeing */
-#define MAX_NUM_TSFR_LLIS	(PL08X_LLI_TSFR_SIZE/sizeof(struct pl08x_lli))
+/*
+ * Number of LLIs in each LLI buffer allocated for one transfer
+ * (maximum times we call dma_pool_alloc on this pool without freeing)
+ */
+#define MAX_NUM_TSFR_LLIS	512
 #define PL08X_ALIGN		8
 
 static inline struct pl08x_dma_chan *to_pl08x_chan(struct dma_chan *chan)
@@ -336,10 +349,39 @@ static int pl08x_phy_channel_busy(struct pl08x_phy_chan *ch)
 {
 	unsigned int val;
 
-	val = readl(ch->base + PL080_CH_CONFIG);
+	val = readl(ch->reg_config);
 	return val & PL080_CONFIG_ACTIVE;
 }
 
+static void pl08x_write_lli(struct pl08x_driver_data *pl08x,
+		struct pl08x_phy_chan *phychan, const u32 *lli, u32 ccfg)
+{
+	if (pl08x->vd->pl080s)
+		dev_vdbg(&pl08x->adev->dev,
+			"WRITE channel %d: csrc=0x%08x, cdst=0x%08x, "
+			"clli=0x%08x, cctl=0x%08x, cctl2=0x%08x, ccfg=0x%08x\n",
+			phychan->id, lli[PL080_LLI_SRC], lli[PL080_LLI_DST],
+			lli[PL080_LLI_LLI], lli[PL080_LLI_CCTL],
+			lli[PL080S_LLI_CCTL2], ccfg);
+	else
+		dev_vdbg(&pl08x->adev->dev,
+			"WRITE channel %d: csrc=0x%08x, cdst=0x%08x, "
+			"clli=0x%08x, cctl=0x%08x, ccfg=0x%08x\n",
+			phychan->id, lli[PL080_LLI_SRC], lli[PL080_LLI_DST],
+			lli[PL080_LLI_LLI], lli[PL080_LLI_CCTL], ccfg);
+
+	writel_relaxed(lli[PL080_LLI_SRC], phychan->base + PL080_CH_SRC_ADDR);
+	writel_relaxed(lli[PL080_LLI_DST], phychan->base + PL080_CH_DST_ADDR);
+	writel_relaxed(lli[PL080_LLI_LLI], phychan->base + PL080_CH_LLI);
+	writel_relaxed(lli[PL080_LLI_CCTL], phychan->base + PL080_CH_CONTROL);
+
+	if (pl08x->vd->pl080s)
+		writel_relaxed(lli[PL080S_LLI_CCTL2],
+				phychan->base + PL080S_CH_CONTROL2);
+
+	writel(ccfg, phychan->reg_config);
+}
+
 /*
  * Set the initial DMA register values i.e. those for the first LLI
  * The next LLI pointer and the configuration interrupt bit have
@@ -352,7 +394,6 @@ static void pl08x_start_next_txd(struct pl08x_dma_chan *plchan)
 	struct pl08x_phy_chan *phychan = plchan->phychan;
 	struct virt_dma_desc *vd = vchan_next_desc(&plchan->vc);
 	struct pl08x_txd *txd = to_pl08x_txd(&vd->tx);
-	struct pl08x_lli *lli;
 	u32 val;
 
 	list_del(&txd->vd.node);
@@ -363,19 +404,7 @@ static void pl08x_start_next_txd(struct pl08x_dma_chan *plchan)
 	while (pl08x_phy_channel_busy(phychan))
 		cpu_relax();
 
-	lli = &txd->llis_va[0];
-
-	dev_vdbg(&pl08x->adev->dev,
-		"WRITE channel %d: csrc=0x%08x, cdst=0x%08x, "
-		"clli=0x%08x, cctl=0x%08x, ccfg=0x%08x\n",
-		phychan->id, lli->src, lli->dst, lli->lli, lli->cctl,
-		txd->ccfg);
-
-	writel(lli->src, phychan->base + PL080_CH_SRC_ADDR);
-	writel(lli->dst, phychan->base + PL080_CH_DST_ADDR);
-	writel(lli->lli, phychan->base + PL080_CH_LLI);
-	writel(lli->cctl, phychan->base + PL080_CH_CONTROL);
-	writel(txd->ccfg, phychan->base + PL080_CH_CONFIG);
+	pl08x_write_lli(pl08x, phychan, &txd->llis_va[0], txd->ccfg);
 
 	/* Enable the DMA channel */
 	/* Do not access config register until channel shows as disabled */
@@ -383,11 +412,11 @@ static void pl08x_start_next_txd(struct pl08x_dma_chan *plchan)
 		cpu_relax();
 
 	/* Do not access config register until channel shows as inactive */
-	val = readl(phychan->base + PL080_CH_CONFIG);
+	val = readl(phychan->reg_config);
 	while ((val & PL080_CONFIG_ACTIVE) || (val & PL080_CONFIG_ENABLE))
-		val = readl(phychan->base + PL080_CH_CONFIG);
+		val = readl(phychan->reg_config);
 
-	writel(val | PL080_CONFIG_ENABLE, phychan->base + PL080_CH_CONFIG);
+	writel(val | PL080_CONFIG_ENABLE, phychan->reg_config);
 }
 
 /*
@@ -406,9 +435,9 @@ static void pl08x_pause_phy_chan(struct pl08x_phy_chan *ch)
 	int timeout;
 
 	/* Set the HALT bit and wait for the FIFO to drain */
-	val = readl(ch->base + PL080_CH_CONFIG);
+	val = readl(ch->reg_config);
 	val |= PL080_CONFIG_HALT;
-	writel(val, ch->base + PL080_CH_CONFIG);
+	writel(val, ch->reg_config);
 
 	/* Wait for channel inactive */
 	for (timeout = 1000; timeout; timeout--) {
@@ -425,9 +454,9 @@ static void pl08x_resume_phy_chan(struct pl08x_phy_chan *ch)
 	u32 val;
 
 	/* Clear the HALT bit */
-	val = readl(ch->base + PL080_CH_CONFIG);
+	val = readl(ch->reg_config);
 	val &= ~PL080_CONFIG_HALT;
-	writel(val, ch->base + PL080_CH_CONFIG);
+	writel(val, ch->reg_config);
 }
 
 /*
@@ -439,12 +468,12 @@ static void pl08x_resume_phy_chan(struct pl08x_phy_chan *ch)
 static void pl08x_terminate_phy_chan(struct pl08x_driver_data *pl08x,
 	struct pl08x_phy_chan *ch)
 {
-	u32 val = readl(ch->base + PL080_CH_CONFIG);
+	u32 val = readl(ch->reg_config);
 
 	val &= ~(PL080_CONFIG_ENABLE | PL080_CONFIG_ERR_IRQ_MASK |
 	         PL080_CONFIG_TC_IRQ_MASK);
 
-	writel(val, ch->base + PL080_CH_CONFIG);
+	writel(val, ch->reg_config);
 
 	writel(1 << ch->id, pl08x->base + PL080_ERR_CLEAR);
 	writel(1 << ch->id, pl08x->base + PL080_TC_CLEAR);
@@ -455,6 +484,28 @@ static inline u32 get_bytes_in_cctl(u32 cctl)
 	/* The source width defines the number of bytes */
 	u32 bytes = cctl & PL080_CONTROL_TRANSFER_SIZE_MASK;
 
+	cctl &= PL080_CONTROL_SWIDTH_MASK;
+
+	switch (cctl >> PL080_CONTROL_SWIDTH_SHIFT) {
+	case PL080_WIDTH_8BIT:
+		break;
+	case PL080_WIDTH_16BIT:
+		bytes *= 2;
+		break;
+	case PL080_WIDTH_32BIT:
+		bytes *= 4;
+		break;
+	}
+	return bytes;
+}
+
+static inline u32 get_bytes_in_cctl_pl080s(u32 cctl, u32 cctl1)
+{
+	/* The source width defines the number of bytes */
+	u32 bytes = cctl1 & PL080S_CONTROL_TRANSFER_SIZE_MASK;
+
+	cctl &= PL080_CONTROL_SWIDTH_MASK;
+
 	switch (cctl >> PL080_CONTROL_SWIDTH_SHIFT) {
 	case PL080_WIDTH_8BIT:
 		break;
@@ -471,47 +522,66 @@ static inline u32 get_bytes_in_cctl(u32 cctl)
 /* The channel should be paused when calling this */
 static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan)
 {
+	struct pl08x_driver_data *pl08x = plchan->host;
+	const u32 *llis_va, *llis_va_limit;
 	struct pl08x_phy_chan *ch;
+	dma_addr_t llis_bus;
 	struct pl08x_txd *txd;
-	size_t bytes = 0;
+	u32 llis_max_words;
+	size_t bytes;
+	u32 clli;
 
 	ch = plchan->phychan;
 	txd = plchan->at;
 
+	if (!ch || !txd)
+		return 0;
+
 	/*
 	 * Follow the LLIs to get the number of remaining
 	 * bytes in the currently active transaction.
 	 */
-	if (ch && txd) {
-		u32 clli = readl(ch->base + PL080_CH_LLI) & ~PL080_LLI_LM_AHB2;
+	clli = readl(ch->base + PL080_CH_LLI) & ~PL080_LLI_LM_AHB2;
 
-		/* First get the remaining bytes in the active transfer */
+	/* First get the remaining bytes in the active transfer */
+	if (pl08x->vd->pl080s)
+		bytes = get_bytes_in_cctl_pl080s(
+				readl(ch->base + PL080_CH_CONTROL),
+				readl(ch->base + PL080S_CH_CONTROL2));
+	else
 		bytes = get_bytes_in_cctl(readl(ch->base + PL080_CH_CONTROL));
 
-		if (clli) {
-			struct pl08x_lli *llis_va = txd->llis_va;
-			dma_addr_t llis_bus = txd->llis_bus;
-			int index;
+	if (!clli)
+		return bytes;
 
-			BUG_ON(clli < llis_bus || clli >= llis_bus +
-				sizeof(struct pl08x_lli) * MAX_NUM_TSFR_LLIS);
+	llis_va = txd->llis_va;
+	llis_bus = txd->llis_bus;
 
-			/*
-			 * Locate the next LLI - as this is an array,
-			 * it's simple maths to find.
-			 */
-			index = (clli - llis_bus) / sizeof(struct pl08x_lli);
+	llis_max_words = pl08x->lli_words * MAX_NUM_TSFR_LLIS;
+	BUG_ON(clli < llis_bus || clli >= llis_bus +
+						sizeof(u32) * llis_max_words);
 
-			for (; index < MAX_NUM_TSFR_LLIS; index++) {
-				bytes += get_bytes_in_cctl(llis_va[index].cctl);
+	/*
+	 * Locate the next LLI - as this is an array,
+	 * it's simple maths to find.
+	 */
+	llis_va += (clli - llis_bus) / sizeof(u32);
 
-				/*
-				 * A LLI pointer of 0 terminates the LLI list
-				 */
-				if (!llis_va[index].lli)
-					break;
-			}
-		}
+	llis_va_limit = llis_va + llis_max_words;
+
+	for (; llis_va < llis_va_limit; llis_va += pl08x->lli_words) {
+		if (pl08x->vd->pl080s)
+			bytes += get_bytes_in_cctl_pl080s(
+						llis_va[PL080_LLI_CCTL],
+						llis_va[PL080S_LLI_CCTL2]);
+		else
+			bytes += get_bytes_in_cctl(llis_va[PL080_LLI_CCTL]);
+
+		/*
+		 * A LLI pointer going backward terminates the LLI list
+		 */
+		if (llis_va[PL080_LLI_LLI] <= clli)
+			break;
 	}
 
 	return bytes;
@@ -722,6 +792,7 @@ static inline u32 pl08x_cctl_bits(u32 cctl, u8 srcwidth, u8 dstwidth,
 		break;
 	}
 
+	tsize &= PL080_CONTROL_TRANSFER_SIZE_MASK;
 	retbits |= tsize << PL080_CONTROL_TRANSFER_SIZE_SHIFT;
 	return retbits;
 }
@@ -766,20 +837,26 @@ static void pl08x_choose_master_bus(struct pl08x_lli_build_data *bd,
 /*
  * Fills in one LLI for a certain transfer descriptor and advance the counter
  */
-static void pl08x_fill_lli_for_desc(struct pl08x_lli_build_data *bd,
-	int num_llis, int len, u32 cctl)
+static void pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x,
+				    struct pl08x_lli_build_data *bd,
+				    int num_llis, int len, u32 cctl, u32 cctl2)
 {
-	struct pl08x_lli *llis_va = bd->txd->llis_va;
+	u32 offset = num_llis * pl08x->lli_words;
+	u32 *llis_va = bd->txd->llis_va + offset;
 	dma_addr_t llis_bus = bd->txd->llis_bus;
 
 	BUG_ON(num_llis >= MAX_NUM_TSFR_LLIS);
 
-	llis_va[num_llis].cctl = cctl;
-	llis_va[num_llis].src = bd->srcbus.addr;
-	llis_va[num_llis].dst = bd->dstbus.addr;
-	llis_va[num_llis].lli = llis_bus + (num_llis + 1) *
-		sizeof(struct pl08x_lli);
-	llis_va[num_llis].lli |= bd->lli_bus;
+	/* Advance the offset to next LLI. */
+	offset += pl08x->lli_words;
+
+	llis_va[PL080_LLI_SRC] = bd->srcbus.addr;
+	llis_va[PL080_LLI_DST] = bd->dstbus.addr;
+	llis_va[PL080_LLI_LLI] = (llis_bus + sizeof(u32) * offset);
+	llis_va[PL080_LLI_LLI] |= bd->lli_bus;
+	llis_va[PL080_LLI_CCTL] = cctl;
+	if (pl08x->vd->pl080s)
+		llis_va[PL080S_LLI_CCTL2] = cctl2;
 
 	if (cctl & PL080_CONTROL_SRC_INCR)
 		bd->srcbus.addr += len;
@@ -791,14 +868,53 @@ static void pl08x_fill_lli_for_desc(struct pl08x_lli_build_data *bd,
 	bd->remainder -= len;
 }
 
-static inline void prep_byte_width_lli(struct pl08x_lli_build_data *bd,
-		u32 *cctl, u32 len, int num_llis, size_t *total_bytes)
+static inline void prep_byte_width_lli(struct pl08x_driver_data *pl08x,
+			struct pl08x_lli_build_data *bd, u32 *cctl, u32 len,
+			int num_llis, size_t *total_bytes)
 {
 	*cctl = pl08x_cctl_bits(*cctl, 1, 1, len);
-	pl08x_fill_lli_for_desc(bd, num_llis, len, *cctl);
+	pl08x_fill_lli_for_desc(pl08x, bd, num_llis, len, *cctl, len);
 	(*total_bytes) += len;
 }
 
+#ifdef VERBOSE_DEBUG
+static void pl08x_dump_lli(struct pl08x_driver_data *pl08x,
+			   const u32 *llis_va, int num_llis)
+{
+	int i;
+
+	if (pl08x->vd->pl080s) {
+		dev_vdbg(&pl08x->adev->dev,
+			"%-3s %-9s  %-10s %-10s %-10s %-10s %s\n",
+			"lli", "", "csrc", "cdst", "clli", "cctl", "cctl2");
+		for (i = 0; i < num_llis; i++) {
+			dev_vdbg(&pl08x->adev->dev,
+				"%3d @%p: 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x\n",
+				i, llis_va, llis_va[PL080_LLI_SRC],
+				llis_va[PL080_LLI_DST], llis_va[PL080_LLI_LLI],
+				llis_va[PL080_LLI_CCTL],
+				llis_va[PL080S_LLI_CCTL2]);
+			llis_va += pl08x->lli_words;
+		}
+	} else {
+		dev_vdbg(&pl08x->adev->dev,
+			"%-3s %-9s  %-10s %-10s %-10s %s\n",
+			"lli", "", "csrc", "cdst", "clli", "cctl");
+		for (i = 0; i < num_llis; i++) {
+			dev_vdbg(&pl08x->adev->dev,
+				"%3d @%p: 0x%08x 0x%08x 0x%08x 0x%08x\n",
+				i, llis_va, llis_va[PL080_LLI_SRC],
+				llis_va[PL080_LLI_DST], llis_va[PL080_LLI_LLI],
+				llis_va[PL080_LLI_CCTL]);
+			llis_va += pl08x->lli_words;
+		}
+	}
+}
+#else
+static inline void pl08x_dump_lli(struct pl08x_driver_data *pl08x,
+				  const u32 *llis_va, int num_llis) {}
+#endif
+
 /*
  * This fills in the table of LLIs for the transfer descriptor
  * Note that we assume we never have to change the burst sizes
@@ -812,7 +928,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
 	int num_llis = 0;
 	u32 cctl, early_bytes = 0;
 	size_t max_bytes_per_lli, total_bytes;
-	struct pl08x_lli *llis_va;
+	u32 *llis_va, *last_lli;
 	struct pl08x_sg *dsg;
 
 	txd->llis_va = dma_pool_alloc(pl08x->pool, GFP_NOWAIT, &txd->llis_bus);
@@ -902,7 +1018,8 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
 
 			cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth,
 					bd.dstbus.buswidth, 0);
-			pl08x_fill_lli_for_desc(&bd, num_llis++, 0, cctl);
+			pl08x_fill_lli_for_desc(pl08x, &bd, num_llis++,
+					0, cctl, 0);
 			break;
 		}
 
@@ -924,8 +1041,8 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
 			dev_vdbg(&pl08x->adev->dev,
 				"%s byte width LLIs (remain 0x%08x)\n",
 				__func__, bd.remainder);
-			prep_byte_width_lli(&bd, &cctl, early_bytes, num_llis++,
-				&total_bytes);
+			prep_byte_width_lli(pl08x, &bd, &cctl, early_bytes,
+				num_llis++, &total_bytes);
 		}
 
 		if (bd.remainder) {
@@ -946,7 +1063,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
 			 * MIN(buswidths)
 			 */
 			max_bytes_per_lli = bd.srcbus.buswidth *
-				PL080_CONTROL_TRANSFER_SIZE_MASK;
+						pl08x->vd->max_transfer_size;
 			dev_vdbg(&pl08x->adev->dev,
 				"%s max bytes per lli = %zu\n",
 				__func__, max_bytes_per_lli);
@@ -981,8 +1098,8 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
 
 				cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth,
 					bd.dstbus.buswidth, tsize);
-				pl08x_fill_lli_for_desc(&bd, num_llis++,
-						lli_len, cctl);
+				pl08x_fill_lli_for_desc(pl08x, &bd, num_llis++,
+						lli_len, cctl, tsize);
 				total_bytes += lli_len;
 			}
 
@@ -993,8 +1110,8 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
 				dev_vdbg(&pl08x->adev->dev,
 					"%s align with boundary, send odd bytes (remain %zu)\n",
 					__func__, bd.remainder);
-				prep_byte_width_lli(&bd, &cctl, bd.remainder,
-						num_llis++, &total_bytes);
+				prep_byte_width_lli(pl08x, &bd, &cctl,
+					bd.remainder, num_llis++, &total_bytes);
 			}
 		}
 
@@ -1008,33 +1125,25 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
 		if (num_llis >= MAX_NUM_TSFR_LLIS) {
 			dev_err(&pl08x->adev->dev,
 				"%s need to increase MAX_NUM_TSFR_LLIS from 0x%08x\n",
-				__func__, (u32) MAX_NUM_TSFR_LLIS);
+				__func__, MAX_NUM_TSFR_LLIS);
 			return 0;
 		}
 	}
 
 	llis_va = txd->llis_va;
-	/* The final LLI terminates the LLI. */
-	llis_va[num_llis - 1].lli = 0;
-	/* The final LLI element shall also fire an interrupt. */
-	llis_va[num_llis - 1].cctl |= PL080_CONTROL_TC_IRQ_EN;
-
-#ifdef VERBOSE_DEBUG
-	{
-		int i;
+	last_lli = llis_va + (num_llis - 1) * pl08x->lli_words;
 
-		dev_vdbg(&pl08x->adev->dev,
-			 "%-3s %-9s  %-10s %-10s %-10s %s\n",
-			 "lli", "", "csrc", "cdst", "clli", "cctl");
-		for (i = 0; i < num_llis; i++) {
-			dev_vdbg(&pl08x->adev->dev,
-				 "%3d @%p: 0x%08x 0x%08x 0x%08x 0x%08x\n",
-				 i, &llis_va[i], llis_va[i].src,
-				 llis_va[i].dst, llis_va[i].lli, llis_va[i].cctl
-				);
-		}
+	if (txd->cyclic) {
+		/* Link back to the first LLI. */
+		last_lli[PL080_LLI_LLI] = txd->llis_bus | bd.lli_bus;
+	} else {
+		/* The final LLI terminates the LLI. */
+		last_lli[PL080_LLI_LLI] = 0;
+		/* The final LLI element shall also fire an interrupt. */
+		last_lli[PL080_LLI_CCTL] |= PL080_CONTROL_TC_IRQ_EN;
 	}
-#endif
+
+	pl08x_dump_lli(pl08x, llis_va, num_llis);
 
 	return num_llis;
 }
@@ -1310,6 +1419,7 @@ static int dma_set_runtime_config(struct dma_chan *chan,
 				  struct dma_slave_config *config)
 {
 	struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
+	struct pl08x_driver_data *pl08x = plchan->host;
 
 	if (!plchan->slave)
 		return -EINVAL;
@@ -1319,6 +1429,13 @@ static int dma_set_runtime_config(struct dma_chan *chan,
 	    config->dst_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES)
 		return -EINVAL;
 
+	if (config->device_fc && pl08x->vd->pl080s) {
+		dev_err(&pl08x->adev->dev,
+			"%s: PL080S does not support peripheral flow control\n",
+			__func__);
+		return -EINVAL;
+	}
+
 	plchan->cfg = *config;
 
 	return 0;
@@ -1409,25 +1526,19 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy(
 	return vchan_tx_prep(&plchan->vc, &txd->vd, flags);
 }
 
-static struct dma_async_tx_descriptor *pl08x_prep_slave_sg(
-		struct dma_chan *chan, struct scatterlist *sgl,
-		unsigned int sg_len, enum dma_transfer_direction direction,
-		unsigned long flags, void *context)
+static struct pl08x_txd *pl08x_init_txd(
+		struct dma_chan *chan,
+		enum dma_transfer_direction direction,
+		dma_addr_t *slave_addr)
 {
 	struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
 	struct pl08x_driver_data *pl08x = plchan->host;
 	struct pl08x_txd *txd;
-	struct pl08x_sg *dsg;
-	struct scatterlist *sg;
 	enum dma_slave_buswidth addr_width;
-	dma_addr_t slave_addr;
 	int ret, tmp;
 	u8 src_buses, dst_buses;
 	u32 maxburst, cctl;
 
-	dev_dbg(&pl08x->adev->dev, "%s prepare transaction of %d bytes from %s\n",
-			__func__, sg_dma_len(sgl), plchan->name);
-
 	txd = pl08x_get_txd(plchan);
 	if (!txd) {
 		dev_err(&pl08x->adev->dev, "%s no txd\n", __func__);
@@ -1441,14 +1552,14 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg(
 	 */
 	if (direction == DMA_MEM_TO_DEV) {
 		cctl = PL080_CONTROL_SRC_INCR;
-		slave_addr = plchan->cfg.dst_addr;
+		*slave_addr = plchan->cfg.dst_addr;
 		addr_width = plchan->cfg.dst_addr_width;
 		maxburst = plchan->cfg.dst_maxburst;
 		src_buses = pl08x->mem_buses;
 		dst_buses = plchan->cd->periph_buses;
 	} else if (direction == DMA_DEV_TO_MEM) {
 		cctl = PL080_CONTROL_DST_INCR;
-		slave_addr = plchan->cfg.src_addr;
+		*slave_addr = plchan->cfg.src_addr;
 		addr_width = plchan->cfg.src_addr_width;
 		maxburst = plchan->cfg.src_maxburst;
 		src_buses = plchan->cd->periph_buses;
@@ -1497,24 +1608,107 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg(
 	else
 		txd->ccfg |= plchan->signal << PL080_CONFIG_SRC_SEL_SHIFT;
 
+	return txd;
+}
+
+static int pl08x_tx_add_sg(struct pl08x_txd *txd,
+			   enum dma_transfer_direction direction,
+			   dma_addr_t slave_addr,
+			   dma_addr_t buf_addr,
+			   unsigned int len)
+{
+	struct pl08x_sg *dsg;
+
+	dsg = kzalloc(sizeof(struct pl08x_sg), GFP_NOWAIT);
+	if (!dsg)
+		return -ENOMEM;
+
+	list_add_tail(&dsg->node, &txd->dsg_list);
+
+	dsg->len = len;
+	if (direction == DMA_MEM_TO_DEV) {
+		dsg->src_addr = buf_addr;
+		dsg->dst_addr = slave_addr;
+	} else {
+		dsg->src_addr = slave_addr;
+		dsg->dst_addr = buf_addr;
+	}
+
+	return 0;
+}
+
+static struct dma_async_tx_descriptor *pl08x_prep_slave_sg(
+		struct dma_chan *chan, struct scatterlist *sgl,
+		unsigned int sg_len, enum dma_transfer_direction direction,
+		unsigned long flags, void *context)
+{
+	struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
+	struct pl08x_driver_data *pl08x = plchan->host;
+	struct pl08x_txd *txd;
+	struct scatterlist *sg;
+	int ret, tmp;
+	dma_addr_t slave_addr;
+
+	dev_dbg(&pl08x->adev->dev, "%s prepare transaction of %d bytes from %s\n",
+			__func__, sg_dma_len(sgl), plchan->name);
+
+	txd = pl08x_init_txd(chan, direction, &slave_addr);
+	if (!txd)
+		return NULL;
+
 	for_each_sg(sgl, sg, sg_len, tmp) {
-		dsg = kzalloc(sizeof(struct pl08x_sg), GFP_NOWAIT);
-		if (!dsg) {
+		ret = pl08x_tx_add_sg(txd, direction, slave_addr,
+				      sg_dma_address(sg),
+				      sg_dma_len(sg));
+		if (ret) {
 			pl08x_release_mux(plchan);
 			pl08x_free_txd(pl08x, txd);
 			dev_err(&pl08x->adev->dev, "%s no mem for pl080 sg\n",
 					__func__);
 			return NULL;
 		}
-		list_add_tail(&dsg->node, &txd->dsg_list);
+	}
 
-		dsg->len = sg_dma_len(sg);
-		if (direction == DMA_MEM_TO_DEV) {
-			dsg->src_addr = sg_dma_address(sg);
-			dsg->dst_addr = slave_addr;
-		} else {
-			dsg->src_addr = slave_addr;
-			dsg->dst_addr = sg_dma_address(sg);
+	ret = pl08x_fill_llis_for_desc(plchan->host, txd);
+	if (!ret) {
+		pl08x_release_mux(plchan);
+		pl08x_free_txd(pl08x, txd);
+		return NULL;
+	}
+
+	return vchan_tx_prep(&plchan->vc, &txd->vd, flags);
+}
+
+static struct dma_async_tx_descriptor *pl08x_prep_dma_cyclic(
+		struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
+		size_t period_len, enum dma_transfer_direction direction,
+		unsigned long flags, void *context)
+{
+	struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
+	struct pl08x_driver_data *pl08x = plchan->host;
+	struct pl08x_txd *txd;
+	int ret, tmp;
+	dma_addr_t slave_addr;
+
+	dev_dbg(&pl08x->adev->dev,
+		"%s prepare cyclic transaction of %d/%d bytes %s %s\n",
+		__func__, period_len, buf_len,
+		direction == DMA_MEM_TO_DEV ? "to" : "from",
+		plchan->name);
+
+	txd = pl08x_init_txd(chan, direction, &slave_addr);
+	if (!txd)
+		return NULL;
+
+	txd->cyclic = true;
+	txd->cctl |= PL080_CONTROL_TC_IRQ_EN;
+	for (tmp = 0; tmp < buf_len; tmp += period_len) {
+		ret = pl08x_tx_add_sg(txd, direction, slave_addr,
+				      buf_addr + tmp, period_len);
+		if (ret) {
+			pl08x_release_mux(plchan);
+			pl08x_free_txd(pl08x, txd);
+			return NULL;
 		}
 	}
 
@@ -1657,7 +1851,9 @@ static irqreturn_t pl08x_irq(int irq, void *dev)
 
 			spin_lock(&plchan->vc.lock);
 			tx = plchan->at;
-			if (tx) {
+			if (tx && tx->cyclic) {
+				vchan_cyclic_callback(&tx->vd);
+			} else if (tx) {
 				plchan->at = NULL;
 				/*
 				 * This descriptor is done, release its mux
@@ -1851,6 +2047,7 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
 {
 	struct pl08x_driver_data *pl08x;
 	const struct vendor_data *vd = id->data;
+	u32 tsfr_size;
 	int ret = 0;
 	int i;
 
@@ -1878,6 +2075,7 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
 
 	/* Initialize slave engine */
 	dma_cap_set(DMA_SLAVE, pl08x->slave.cap_mask);
+	dma_cap_set(DMA_CYCLIC, pl08x->slave.cap_mask);
 	pl08x->slave.dev = &adev->dev;
 	pl08x->slave.device_alloc_chan_resources = pl08x_alloc_chan_resources;
 	pl08x->slave.device_free_chan_resources = pl08x_free_chan_resources;
@@ -1885,6 +2083,7 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
 	pl08x->slave.device_tx_status = pl08x_dma_tx_status;
 	pl08x->slave.device_issue_pending = pl08x_issue_pending;
 	pl08x->slave.device_prep_slave_sg = pl08x_prep_slave_sg;
+	pl08x->slave.device_prep_dma_cyclic = pl08x_prep_dma_cyclic;
 	pl08x->slave.device_control = pl08x_control;
 
 	/* Get the platform data */
@@ -1907,9 +2106,15 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
 		pl08x->mem_buses = pl08x->pd->mem_buses;
 	}
 
+	if (vd->pl080s)
+		pl08x->lli_words = PL080S_LLI_WORDS;
+	else
+		pl08x->lli_words = PL080_LLI_WORDS;
+	tsfr_size = MAX_NUM_TSFR_LLIS * pl08x->lli_words * sizeof(u32);
+
 	/* A DMA memory pool for LLIs, align on 1-byte boundary */
 	pl08x->pool = dma_pool_create(DRIVER_NAME, &pl08x->adev->dev,
-			PL08X_LLI_TSFR_SIZE, PL08X_ALIGN, 0);
+						tsfr_size, PL08X_ALIGN, 0);
 	if (!pl08x->pool) {
 		ret = -ENOMEM;
 		goto out_no_lli_pool;
@@ -1952,6 +2157,7 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
 
 		ch->id = i;
 		ch->base = pl08x->base + PL080_Cx_BASE(i);
+		ch->reg_config = ch->base + vd->config_offset;
 		spin_lock_init(&ch->lock);
 
 		/*
@@ -1962,7 +2168,7 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
 		if (vd->nomadik) {
 			u32 val;
 
-			val = readl(ch->base + PL080_CH_CONFIG);
+			val = readl(ch->reg_config);
 			if (val & (PL080N_CONFIG_ITPROT | PL080N_CONFIG_SECPROT)) {
 				dev_info(&adev->dev, "physical channel %d reserved for secure access only\n", i);
 				ch->locked = true;
@@ -2013,8 +2219,8 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
 
 	amba_set_drvdata(adev, pl08x);
 	init_pl08x_debugfs(pl08x);
-	dev_info(&pl08x->adev->dev, "DMA: PL%03x rev%u at 0x%08llx irq %d\n",
-		 amba_part(adev), amba_rev(adev),
+	dev_info(&pl08x->adev->dev, "DMA: PL%03x%s rev%u at 0x%08llx irq %d\n",
+		 amba_part(adev), pl08x->vd->pl080s ? "s" : "", amba_rev(adev),
 		 (unsigned long long)adev->res.start, adev->irq[0]);
 
 	return 0;
@@ -2043,22 +2249,41 @@ out_no_pl08x:
 
 /* PL080 has 8 channels and the PL080 have just 2 */
 static struct vendor_data vendor_pl080 = {
+	.config_offset = PL080_CH_CONFIG,
 	.channels = 8,
 	.dualmaster = true,
+	.max_transfer_size = PL080_CONTROL_TRANSFER_SIZE_MASK,
 };
 
 static struct vendor_data vendor_nomadik = {
+	.config_offset = PL080_CH_CONFIG,
 	.channels = 8,
 	.dualmaster = true,
 	.nomadik = true,
+	.max_transfer_size = PL080_CONTROL_TRANSFER_SIZE_MASK,
+};
+
+static struct vendor_data vendor_pl080s = {
+	.config_offset = PL080S_CH_CONFIG,
+	.channels = 8,
+	.pl080s = true,
+	.max_transfer_size = PL080S_CONTROL_TRANSFER_SIZE_MASK,
 };
 
 static struct vendor_data vendor_pl081 = {
+	.config_offset = PL080_CH_CONFIG,
 	.channels = 2,
 	.dualmaster = false,
+	.max_transfer_size = PL080_CONTROL_TRANSFER_SIZE_MASK,
 };
 
 static struct amba_id pl08x_ids[] = {
+	/* Samsung PL080S variant */
+	{
+		.id	= 0x0a141080,
+		.mask	= 0xffffffff,
+		.data	= &vendor_pl080s,
+	},
 	/* PL080 */
 	{
 		.id	= 0x00041080,