dmaengine: mv_xor: add suspend/resume support

This commit adds suspend/resume support to the mv_xor driver. The
config and interrupt mask registers must be saved and restored, and
upon resume, the MBus windows configuration must also be done again.

Tested on Armada 388 GP, with a RAID 5 array, accessed before and
after a suspend to RAM cycle.

Based on work from Ofer Heifetz and Lior Amsalem.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

1 files changed, 53 insertions, 0 deletions

diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c
index a95878cd36d9..14091f878f80 100644
--- a/drivers/dma/mv_xor.c
+++ b/drivers/dma/mv_xor.c
@@ -1085,6 +1085,57 @@ mv_xor_conf_mbus_windows(struct mv_xor_device *xordev,
 	writel(0, base + WINDOW_OVERRIDE_CTRL(1));
 }
 
+/*
+ * Since this XOR driver is basically used only for RAID5, we don't
+ * need to care about synchronizing ->suspend with DMA activity,
+ * because the DMA engine will naturally be quiet due to the block
+ * devices being suspended.
+ */
+static int mv_xor_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct mv_xor_device *xordev = platform_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < MV_XOR_MAX_CHANNELS; i++) {
+		struct mv_xor_chan *mv_chan = xordev->channels[i];
+
+		if (!mv_chan)
+			continue;
+
+		mv_chan->saved_config_reg =
+			readl_relaxed(XOR_CONFIG(mv_chan));
+		mv_chan->saved_int_mask_reg =
+			readl_relaxed(XOR_INTR_MASK(mv_chan));
+	}
+
+	return 0;
+}
+
+static int mv_xor_resume(struct platform_device *dev)
+{
+	struct mv_xor_device *xordev = platform_get_drvdata(dev);
+	const struct mbus_dram_target_info *dram;
+	int i;
+
+	for (i = 0; i < MV_XOR_MAX_CHANNELS; i++) {
+		struct mv_xor_chan *mv_chan = xordev->channels[i];
+
+		if (!mv_chan)
+			continue;
+
+		writel_relaxed(mv_chan->saved_config_reg,
+			       XOR_CONFIG(mv_chan));
+		writel_relaxed(mv_chan->saved_int_mask_reg,
+			       XOR_INTR_MASK(mv_chan));
+	}
+
+	dram = mv_mbus_dram_info();
+	if (dram)
+		mv_xor_conf_mbus_windows(xordev, dram);
+
+	return 0;
+}
+
 static const struct of_device_id mv_xor_dt_ids[] = {
 	{ .compatible = "marvell,orion-xor", .data = (void *)XOR_MODE_IN_REG },
 	{ .compatible = "marvell,armada-380-xor", .data = (void *)XOR_MODE_IN_DESC },
@@ -1246,6 +1297,8 @@ err_channel_add:
 
 static struct platform_driver mv_xor_driver = {
 	.probe		= mv_xor_probe,
+	.suspend        = mv_xor_suspend,
+	.resume         = mv_xor_resume,
 	.driver		= {
 		.name	        = MV_XOR_NAME,
 		.of_match_table = of_match_ptr(mv_xor_dt_ids),