diff options
author | Christian Lamparter <chunkeey@gmail.com> | 2018-11-17 17:17:21 +0100 |
---|---|---|
committer | Vinod Koul <vkoul@kernel.org> | 2018-11-24 15:37:22 +0100 |
commit | 7b0c03ecc42fb223baf015877fee9d517c2c8af1 (patch) | |
tree | e2dbe77331ca4c09b9794e63f73037d44bebd6bb /drivers/dma | |
parent | dt-bindings: dmaengine: dw-dmac: add protection control property (diff) | |
download | linux-7b0c03ecc42fb223baf015877fee9d517c2c8af1.tar.xz linux-7b0c03ecc42fb223baf015877fee9d517c2c8af1.zip |
dmaengine: dw-dmac: implement dma protection control setting
This patch adds a new device-tree property that allows to
specify the dma protection control bits for the all of the
DMA controller's channel uniformly.
Setting the "correct" bits can have a huge impact on the
PPC460EX and APM82181 that use this DMA engine in combination
with a DesignWare' SATA-II core (sata_dwc_460ex driver).
In the OpenWrt Forum, the user takimata reported that:
|It seems your patch unleashed the full power of the SATA port.
|Where I was previously hitting a really hard limit at around
|82 MB/s for reading and 27 MB/s for writing, I am now getting this:
|
|root@OpenWrt:/mnt# time dd if=/dev/zero of=tempfile bs=1M count=1024
|1024+0 records in
|1024+0 records out
|real 0m 13.65s
|user 0m 0.01s
|sys 0m 11.89s
|
|root@OpenWrt:/mnt# time dd if=tempfile of=/dev/null bs=1M count=1024
|1024+0 records in
|1024+0 records out
|real 0m 8.41s
|user 0m 0.01s
|sys 0m 4.70s
|
|This means: 121 MB/s reading and 75 MB/s writing!
|
|The drive is a WD Green WD10EARX taken from an older MBL Single.
|I repeated the test a few times with even larger files to rule out
|any caching, I'm still seeing the same great performance. OpenWrt is
|now completely on par with the original MBL firmware's performance.
Another user And.short reported:
|I can report that your fix worked! Boots up fine with two
|drives even with more partitions, and no more reboot on
|concurrent disk access!
A closer look into the sata_dwc_460ex code revealed that
the driver did initally set the correct protection control
bits. However, this feature was lost when the sata_dwc_460ex
driver was converted to the generic DMA driver framework.
BugLink: https://forum.openwrt.org/t/wd-mybook-live-duo-two-disks/16195/55
BugLink: https://forum.openwrt.org/t/wd-mybook-live-duo-two-disks/16195/50
Fixes: 8b3444852a2b ("sata_dwc_460ex: move to generic DMA driver")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Diffstat (limited to 'drivers/dma')
-rw-r--r-- | drivers/dma/dw/core.c | 2 | ||||
-rw-r--r-- | drivers/dma/dw/platform.c | 6 | ||||
-rw-r--r-- | drivers/dma/dw/regs.h | 4 |
3 files changed, 12 insertions, 0 deletions
diff --git a/drivers/dma/dw/core.c b/drivers/dma/dw/core.c index d0c3e50b39fb..2c5ca1961256 100644 --- a/drivers/dma/dw/core.c +++ b/drivers/dma/dw/core.c @@ -160,12 +160,14 @@ static void dwc_initialize_chan_idma32(struct dw_dma_chan *dwc) static void dwc_initialize_chan_dw(struct dw_dma_chan *dwc) { + struct dw_dma *dw = to_dw_dma(dwc->chan.device); u32 cfghi = DWC_CFGH_FIFO_MODE; u32 cfglo = DWC_CFGL_CH_PRIOR(dwc->priority); bool hs_polarity = dwc->dws.hs_polarity; cfghi |= DWC_CFGH_DST_PER(dwc->dws.dst_id); cfghi |= DWC_CFGH_SRC_PER(dwc->dws.src_id); + cfghi |= DWC_CFGH_PROTCTL(dw->pdata->protctl); /* Set polarity of handshake interface */ cfglo |= hs_polarity ? DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL : 0; diff --git a/drivers/dma/dw/platform.c b/drivers/dma/dw/platform.c index f01b2c173fa6..31ff8113c3de 100644 --- a/drivers/dma/dw/platform.c +++ b/drivers/dma/dw/platform.c @@ -162,6 +162,12 @@ dw_dma_parse_dt(struct platform_device *pdev) pdata->multi_block[tmp] = 1; } + if (!of_property_read_u32(np, "snps,dma-protection-control", &tmp)) { + if (tmp > CHAN_PROTCTL_MASK) + return NULL; + pdata->protctl = tmp; + } + return pdata; } #else diff --git a/drivers/dma/dw/regs.h b/drivers/dma/dw/regs.h index 09e7dfdbb790..646c9c960c07 100644 --- a/drivers/dma/dw/regs.h +++ b/drivers/dma/dw/regs.h @@ -200,6 +200,10 @@ enum dw_dma_msize { #define DWC_CFGH_FCMODE (1 << 0) #define DWC_CFGH_FIFO_MODE (1 << 1) #define DWC_CFGH_PROTCTL(x) ((x) << 2) +#define DWC_CFGH_PROTCTL_DATA (0 << 2) /* data access - always set */ +#define DWC_CFGH_PROTCTL_PRIV (1 << 2) /* privileged -> AHB HPROT[1] */ +#define DWC_CFGH_PROTCTL_BUFFER (2 << 2) /* bufferable -> AHB HPROT[2] */ +#define DWC_CFGH_PROTCTL_CACHE (4 << 2) /* cacheable -> AHB HPROT[3] */ #define DWC_CFGH_DS_UPD_EN (1 << 5) #define DWC_CFGH_SS_UPD_EN (1 << 6) #define DWC_CFGH_SRC_PER(x) ((x) << 7) |