Merge tag 'char-misc-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big char/misc driver patch pull request for 5.1-rc1.

  The largest thing by far is the new habanalabs driver for their AI
  accelerator chip. For now it is in the drivers/misc directory but will
  probably move to a new directory soon along with other drivers of this
  type.

  Other than that, just the usual set of individual driver updates and
  fixes. There's an "odd" merge in here from the DRM tree that they
  asked me to do as the MEI driver is starting to interact with the i915
  driver, and it needed some coordination. All of those patches have
  been properly acked by the relevant subsystem maintainers.

  All of these have been in linux-next with no reported issues, most for
  quite some time"

* tag 'char-misc-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (219 commits)
  habanalabs: adjust Kconfig to fix build errors
  habanalabs: use %px instead of %p in error print
  habanalabs: use do_div for 64-bit divisions
  intel_th: gth: Fix an off-by-one in output unassigning
  habanalabs: fix little-endian<->cpu conversion warnings
  habanalabs: use NULL to initialize array of pointers
  habanalabs: fix little-endian<->cpu conversion warnings
  habanalabs: soft-reset device if context-switch fails
  habanalabs: print pointer using %p
  habanalabs: fix memory leak with CBs with unaligned size
  habanalabs: return correct error code on MMU mapping failure
  habanalabs: add comments in uapi/misc/habanalabs.h
  habanalabs: extend QMAN0 job timeout
  habanalabs: set DMA0 completion to SOB 1007
  habanalabs: fix validation of WREG32 to DMA completion
  habanalabs: fix mmu cache registers init
  habanalabs: disable CPU access on timeouts
  habanalabs: add MMU DRAM default page mapping
  habanalabs: Dissociate RAZWI info from event types
  misc/habanalabs: adjust Kconfig to fix build errors
  ...

1 files changed, 339 insertions, 0 deletions

diff --git a/drivers/extcon/extcon-ptn5150.c b/drivers/extcon/extcon-ptn5150.c
new file mode 100644
index 000000000000..d1c997599390
--- /dev/null
+++ b/drivers/extcon/extcon-ptn5150.c
@@ -0,0 +1,339 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// extcon-ptn5150.c - PTN5150 CC logic extcon driver to support USB detection
+//
+// Based on extcon-sm5502.c driver
+// Copyright (c) 2018-2019 by Vijai Kumar K
+// Author: Vijai Kumar K <vijaikumar.kanagarajan@gmail.com>
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/extcon-provider.h>
+#include <linux/gpio/consumer.h>
+
+/* PTN5150 registers */
+enum ptn5150_reg {
+	PTN5150_REG_DEVICE_ID = 0x01,
+	PTN5150_REG_CONTROL,
+	PTN5150_REG_INT_STATUS,
+	PTN5150_REG_CC_STATUS,
+	PTN5150_REG_CON_DET = 0x09,
+	PTN5150_REG_VCONN_STATUS,
+	PTN5150_REG_RESET,
+	PTN5150_REG_INT_MASK = 0x18,
+	PTN5150_REG_INT_REG_STATUS,
+	PTN5150_REG_END,
+};
+
+#define PTN5150_DFP_ATTACHED			0x1
+#define PTN5150_UFP_ATTACHED			0x2
+
+/* Define PTN5150 MASK/SHIFT constant */
+#define PTN5150_REG_DEVICE_ID_VENDOR_SHIFT	0
+#define PTN5150_REG_DEVICE_ID_VENDOR_MASK	\
+	(0x3 << PTN5150_REG_DEVICE_ID_VENDOR_SHIFT)
+
+#define PTN5150_REG_DEVICE_ID_VERSION_SHIFT	3
+#define PTN5150_REG_DEVICE_ID_VERSION_MASK	\
+	(0x1f << PTN5150_REG_DEVICE_ID_VERSION_SHIFT)
+
+#define PTN5150_REG_CC_PORT_ATTACHMENT_SHIFT	2
+#define PTN5150_REG_CC_PORT_ATTACHMENT_MASK	\
+	(0x7 << PTN5150_REG_CC_PORT_ATTACHMENT_SHIFT)
+
+#define PTN5150_REG_CC_VBUS_DETECTION_SHIFT	7
+#define PTN5150_REG_CC_VBUS_DETECTION_MASK	\
+	(0x1 << PTN5150_REG_CC_VBUS_DETECTION_SHIFT)
+
+#define PTN5150_REG_INT_CABLE_ATTACH_SHIFT	0
+#define PTN5150_REG_INT_CABLE_ATTACH_MASK	\
+	(0x1 << PTN5150_REG_INT_CABLE_ATTACH_SHIFT)
+
+#define PTN5150_REG_INT_CABLE_DETACH_SHIFT	1
+#define PTN5150_REG_INT_CABLE_DETACH_MASK	\
+	(0x1 << PTN5150_REG_CC_CABLE_DETACH_SHIFT)
+
+struct ptn5150_info {
+	struct device *dev;
+	struct extcon_dev *edev;
+	struct i2c_client *i2c;
+	struct regmap *regmap;
+	struct gpio_desc *int_gpiod;
+	struct gpio_desc *vbus_gpiod;
+	int irq;
+	struct work_struct irq_work;
+	struct mutex mutex;
+};
+
+/* List of detectable cables */
+static const unsigned int ptn5150_extcon_cable[] = {
+	EXTCON_USB,
+	EXTCON_USB_HOST,
+	EXTCON_NONE,
+};
+
+static const struct regmap_config ptn5150_regmap_config = {
+	.reg_bits	= 8,
+	.val_bits	= 8,
+	.max_register	= PTN5150_REG_END,
+};
+
+static void ptn5150_irq_work(struct work_struct *work)
+{
+	struct ptn5150_info *info = container_of(work,
+			struct ptn5150_info, irq_work);
+	int ret = 0;
+	unsigned int reg_data;
+	unsigned int int_status;
+
+	if (!info->edev)
+		return;
+
+	mutex_lock(&info->mutex);
+
+	ret = regmap_read(info->regmap, PTN5150_REG_CC_STATUS, &reg_data);
+	if (ret) {
+		dev_err(info->dev, "failed to read CC STATUS %d\n", ret);
+		mutex_unlock(&info->mutex);
+		return;
+	}
+
+	/* Clear interrupt. Read would clear the register */
+	ret = regmap_read(info->regmap, PTN5150_REG_INT_STATUS, &int_status);
+	if (ret) {
+		dev_err(info->dev, "failed to read INT STATUS %d\n", ret);
+		mutex_unlock(&info->mutex);
+		return;
+	}
+
+	if (int_status) {
+		unsigned int cable_attach;
+
+		cable_attach = int_status & PTN5150_REG_INT_CABLE_ATTACH_MASK;
+		if (cable_attach) {
+			unsigned int port_status;
+			unsigned int vbus;
+
+			port_status = ((reg_data &
+					PTN5150_REG_CC_PORT_ATTACHMENT_MASK) >>
+					PTN5150_REG_CC_PORT_ATTACHMENT_SHIFT);
+
+			switch (port_status) {
+			case PTN5150_DFP_ATTACHED:
+				extcon_set_state_sync(info->edev,
+						EXTCON_USB_HOST, false);
+				gpiod_set_value(info->vbus_gpiod, 0);
+				extcon_set_state_sync(info->edev, EXTCON_USB,
+						true);
+				break;
+			case PTN5150_UFP_ATTACHED:
+				extcon_set_state_sync(info->edev, EXTCON_USB,
+						false);
+				vbus = ((reg_data &
+					PTN5150_REG_CC_VBUS_DETECTION_MASK) >>
+					PTN5150_REG_CC_VBUS_DETECTION_SHIFT);
+				if (vbus)
+					gpiod_set_value(info->vbus_gpiod, 0);
+				else
+					gpiod_set_value(info->vbus_gpiod, 1);
+
+				extcon_set_state_sync(info->edev,
+						EXTCON_USB_HOST, true);
+				break;
+			default:
+				dev_err(info->dev,
+					"Unknown Port status : %x\n",
+					port_status);
+				break;
+			}
+		} else {
+			extcon_set_state_sync(info->edev,
+					EXTCON_USB_HOST, false);
+			extcon_set_state_sync(info->edev,
+					EXTCON_USB, false);
+			gpiod_set_value(info->vbus_gpiod, 0);
+		}
+	}
+
+	/* Clear interrupt. Read would clear the register */
+	ret = regmap_read(info->regmap, PTN5150_REG_INT_REG_STATUS,
+			&int_status);
+	if (ret) {
+		dev_err(info->dev,
+			"failed to read INT REG STATUS %d\n", ret);
+		mutex_unlock(&info->mutex);
+		return;
+	}
+
+	mutex_unlock(&info->mutex);
+}
+
+
+static irqreturn_t ptn5150_irq_handler(int irq, void *data)
+{
+	struct ptn5150_info *info = data;
+
+	schedule_work(&info->irq_work);
+
+	return IRQ_HANDLED;
+}
+
+static int ptn5150_init_dev_type(struct ptn5150_info *info)
+{
+	unsigned int reg_data, vendor_id, version_id;
+	int ret;
+
+	ret = regmap_read(info->regmap, PTN5150_REG_DEVICE_ID, &reg_data);
+	if (ret) {
+		dev_err(info->dev, "failed to read DEVICE_ID %d\n", ret);
+		return -EINVAL;
+	}
+
+	vendor_id = ((reg_data & PTN5150_REG_DEVICE_ID_VENDOR_MASK) >>
+				PTN5150_REG_DEVICE_ID_VENDOR_SHIFT);
+	version_id = ((reg_data & PTN5150_REG_DEVICE_ID_VERSION_MASK) >>
+				PTN5150_REG_DEVICE_ID_VERSION_SHIFT);
+
+	dev_info(info->dev, "Device type: version: 0x%x, vendor: 0x%x\n",
+			    version_id, vendor_id);
+
+	/* Clear any existing interrupts */
+	ret = regmap_read(info->regmap, PTN5150_REG_INT_STATUS, &reg_data);
+	if (ret) {
+		dev_err(info->dev,
+			"failed to read PTN5150_REG_INT_STATUS %d\n",
+			ret);
+		return -EINVAL;
+	}
+
+	ret = regmap_read(info->regmap, PTN5150_REG_INT_REG_STATUS, &reg_data);
+	if (ret) {
+		dev_err(info->dev,
+			"failed to read PTN5150_REG_INT_REG_STATUS %d\n", ret);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int ptn5150_i2c_probe(struct i2c_client *i2c,
+				 const struct i2c_device_id *id)
+{
+	struct device *dev = &i2c->dev;
+	struct device_node *np = i2c->dev.of_node;
+	struct ptn5150_info *info;
+	int ret;
+
+	if (!np)
+		return -EINVAL;
+
+	info = devm_kzalloc(&i2c->dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+	i2c_set_clientdata(i2c, info);
+
+	info->dev = &i2c->dev;
+	info->i2c = i2c;
+	info->int_gpiod = devm_gpiod_get(&i2c->dev, "int", GPIOD_IN);
+	if (IS_ERR(info->int_gpiod)) {
+		dev_err(dev, "failed to get INT GPIO\n");
+		return PTR_ERR(info->int_gpiod);
+	}
+	info->vbus_gpiod = devm_gpiod_get(&i2c->dev, "vbus", GPIOD_IN);
+	if (IS_ERR(info->vbus_gpiod)) {
+		dev_err(dev, "failed to get VBUS GPIO\n");
+		return PTR_ERR(info->vbus_gpiod);
+	}
+	ret = gpiod_direction_output(info->vbus_gpiod, 0);
+	if (ret) {
+		dev_err(dev, "failed to set VBUS GPIO direction\n");
+		return -EINVAL;
+	}
+
+	mutex_init(&info->mutex);
+
+	INIT_WORK(&info->irq_work, ptn5150_irq_work);
+
+	info->regmap = devm_regmap_init_i2c(i2c, &ptn5150_regmap_config);
+	if (IS_ERR(info->regmap)) {
+		ret = PTR_ERR(info->regmap);
+		dev_err(info->dev, "failed to allocate register map: %d\n",
+				   ret);
+		return ret;
+	}
+
+	if (info->int_gpiod) {
+		info->irq = gpiod_to_irq(info->int_gpiod);
+		if (info->irq < 0) {
+			dev_err(dev, "failed to get INTB IRQ\n");
+			return info->irq;
+		}
+
+		ret = devm_request_threaded_irq(dev, info->irq, NULL,
+						ptn5150_irq_handler,
+						IRQF_TRIGGER_FALLING |
+						IRQF_ONESHOT,
+						i2c->name, info);
+		if (ret < 0) {
+			dev_err(dev, "failed to request handler for INTB IRQ\n");
+			return ret;
+		}
+	}
+
+	/* Allocate extcon device */
+	info->edev = devm_extcon_dev_allocate(info->dev, ptn5150_extcon_cable);
+	if (IS_ERR(info->edev)) {
+		dev_err(info->dev, "failed to allocate memory for extcon\n");
+		return -ENOMEM;
+	}
+
+	/* Register extcon device */
+	ret = devm_extcon_dev_register(info->dev, info->edev);
+	if (ret) {
+		dev_err(info->dev, "failed to register extcon device\n");
+		return ret;
+	}
+
+	/* Initialize PTN5150 device and print vendor id and version id */
+	ret = ptn5150_init_dev_type(info);
+	if (ret)
+		return -EINVAL;
+
+	return 0;
+}
+
+static const struct of_device_id ptn5150_dt_match[] = {
+	{ .compatible = "nxp,ptn5150" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ptn5150_dt_match);
+
+static const struct i2c_device_id ptn5150_i2c_id[] = {
+	{ "ptn5150", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ptn5150_i2c_id);
+
+static struct i2c_driver ptn5150_i2c_driver = {
+	.driver		= {
+		.name	= "ptn5150",
+		.of_match_table = ptn5150_dt_match,
+	},
+	.probe	= ptn5150_i2c_probe,
+	.id_table = ptn5150_i2c_id,
+};
+
+static int __init ptn5150_i2c_init(void)
+{
+	return i2c_add_driver(&ptn5150_i2c_driver);
+}
+subsys_initcall(ptn5150_i2c_init);
+
+MODULE_DESCRIPTION("NXP PTN5150 CC logic Extcon driver");
+MODULE_AUTHOR("Vijai Kumar K <vijaikumar.kanagarajan@gmail.com>");
+MODULE_LICENSE("GPL v2");