diff options
author | Hans de Goede <hdegoede@redhat.com> | 2017-03-23 17:01:42 +0100 |
---|---|---|
committer | Chanwoo Choi <cw00.choi@samsung.com> | 2017-04-06 03:55:23 +0200 |
commit | db0f3baaa38bb587d831b1127082643b5e813074 (patch) | |
tree | 9fad71328cb04041abcb2bea2dd77d99b85cbee5 /drivers/extcon | |
parent | extcon: palmas: Don't miss GPIO events during suspend/resume (diff) | |
download | linux-db0f3baaa38bb587d831b1127082643b5e813074.tar.xz linux-db0f3baaa38bb587d831b1127082643b5e813074.zip |
extcon: intel-cht-wc: Add Intel Cherry Trail Whiskey Cove PMIC extcon driver
Add a driver for charger detection / control on the Intel Cherrytrail
Whiskey Cove PMIC.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Diffstat (limited to 'drivers/extcon')
-rw-r--r-- | drivers/extcon/Kconfig | 7 | ||||
-rw-r--r-- | drivers/extcon/Makefile | 1 | ||||
-rw-r--r-- | drivers/extcon/extcon-intel-cht-wc.c | 353 |
3 files changed, 361 insertions, 0 deletions
diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig index fc09c76248b4..32f2dc8e4702 100644 --- a/drivers/extcon/Kconfig +++ b/drivers/extcon/Kconfig @@ -52,6 +52,13 @@ config EXTCON_INTEL_INT3496 This ACPI device is typically found on Intel Baytrail or Cherrytrail based tablets, or other Baytrail / Cherrytrail devices. +config EXTCON_INTEL_CHT_WC + tristate "Intel Cherrytrail Whiskey Cove PMIC extcon driver" + depends on INTEL_SOC_PMIC_CHTWC + help + Say Y here to enable extcon support for charger detection / control + on the Intel Cherrytrail Whiskey Cove PMIC. + config EXTCON_MAX14577 tristate "Maxim MAX14577/77836 EXTCON Support" depends on MFD_MAX14577 diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile index 237ac3f953c2..ecfa95804427 100644 --- a/drivers/extcon/Makefile +++ b/drivers/extcon/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_EXTCON_ARIZONA) += extcon-arizona.o obj-$(CONFIG_EXTCON_AXP288) += extcon-axp288.o obj-$(CONFIG_EXTCON_GPIO) += extcon-gpio.o obj-$(CONFIG_EXTCON_INTEL_INT3496) += extcon-intel-int3496.o +obj-$(CONFIG_EXTCON_INTEL_CHT_WC) += extcon-intel-cht-wc.o obj-$(CONFIG_EXTCON_MAX14577) += extcon-max14577.o obj-$(CONFIG_EXTCON_MAX3355) += extcon-max3355.o obj-$(CONFIG_EXTCON_MAX77693) += extcon-max77693.o diff --git a/drivers/extcon/extcon-intel-cht-wc.c b/drivers/extcon/extcon-intel-cht-wc.c new file mode 100644 index 000000000000..f1c43af7682b --- /dev/null +++ b/drivers/extcon/extcon-intel-cht-wc.c @@ -0,0 +1,353 @@ +/* + * Extcon charger detection driver for Intel Cherrytrail Whiskey Cove PMIC + * Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com> + * + * Based on various non upstream patches to support the CHT Whiskey Cove PMIC: + * Copyright (C) 2013-2015 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/extcon.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/mfd/intel_soc_pmic.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +#define CHT_WC_PHYCTRL 0x5e07 + +#define CHT_WC_CHGRCTRL0 0x5e16 +#define CHT_WC_CHGRCTRL0_CHGRRESET BIT(0) +#define CHT_WC_CHGRCTRL0_EMRGCHREN BIT(1) +#define CHT_WC_CHGRCTRL0_EXTCHRDIS BIT(2) +#define CHT_WC_CHGRCTRL0_SWCONTROL BIT(3) +#define CHT_WC_CHGRCTRL0_TTLCK_MASK BIT(4) +#define CHT_WC_CHGRCTRL0_CCSM_OFF_MASK BIT(5) +#define CHT_WC_CHGRCTRL0_DBPOFF_MASK BIT(6) +#define CHT_WC_CHGRCTRL0_WDT_NOKICK BIT(7) + +#define CHT_WC_CHGRCTRL1 0x5e17 + +#define CHT_WC_USBSRC 0x5e29 +#define CHT_WC_USBSRC_STS_MASK GENMASK(1, 0) +#define CHT_WC_USBSRC_STS_SUCCESS 2 +#define CHT_WC_USBSRC_STS_FAIL 3 +#define CHT_WC_USBSRC_TYPE_SHIFT 2 +#define CHT_WC_USBSRC_TYPE_MASK GENMASK(5, 2) +#define CHT_WC_USBSRC_TYPE_NONE 0 +#define CHT_WC_USBSRC_TYPE_SDP 1 +#define CHT_WC_USBSRC_TYPE_DCP 2 +#define CHT_WC_USBSRC_TYPE_CDP 3 +#define CHT_WC_USBSRC_TYPE_ACA 4 +#define CHT_WC_USBSRC_TYPE_SE1 5 +#define CHT_WC_USBSRC_TYPE_MHL 6 +#define CHT_WC_USBSRC_TYPE_FLOAT_DP_DN 7 +#define CHT_WC_USBSRC_TYPE_OTHER 8 +#define CHT_WC_USBSRC_TYPE_DCP_EXTPHY 9 + +#define CHT_WC_PWRSRC_IRQ 0x6e03 +#define CHT_WC_PWRSRC_IRQ_MASK 0x6e0f +#define CHT_WC_PWRSRC_STS 0x6e1e +#define CHT_WC_PWRSRC_VBUS BIT(0) +#define CHT_WC_PWRSRC_DC BIT(1) +#define CHT_WC_PWRSRC_BAT BIT(2) +#define CHT_WC_PWRSRC_ID_GND BIT(3) +#define CHT_WC_PWRSRC_ID_FLOAT BIT(4) + +enum cht_wc_usb_id { + USB_ID_OTG, + USB_ID_GND, + USB_ID_FLOAT, + USB_RID_A, + USB_RID_B, + USB_RID_C, +}; + +enum cht_wc_mux_select { + MUX_SEL_PMIC = 0, + MUX_SEL_SOC, +}; + +static const unsigned int cht_wc_extcon_cables[] = { + EXTCON_USB, + EXTCON_USB_HOST, + EXTCON_CHG_USB_SDP, + EXTCON_CHG_USB_CDP, + EXTCON_CHG_USB_DCP, + EXTCON_CHG_USB_ACA, + EXTCON_NONE, +}; + +struct cht_wc_extcon_data { + struct device *dev; + struct regmap *regmap; + struct extcon_dev *edev; + unsigned int previous_cable; +}; + +static int cht_wc_extcon_get_id(struct cht_wc_extcon_data *ext, int pwrsrc_sts) +{ + if (pwrsrc_sts & CHT_WC_PWRSRC_ID_GND) + return USB_ID_GND; + if (pwrsrc_sts & CHT_WC_PWRSRC_ID_FLOAT) + return USB_ID_FLOAT; + + /* + * Once we have iio support for the gpadc we should read the USBID + * gpadc channel here and determine ACA role based on that. + */ + return USB_ID_FLOAT; +} + +static int cht_wc_extcon_get_charger(struct cht_wc_extcon_data *ext) +{ + int ret, usbsrc, status; + unsigned long timeout; + + /* Charger detection can take upto 600ms, wait 800ms max. */ + timeout = jiffies + msecs_to_jiffies(800); + do { + ret = regmap_read(ext->regmap, CHT_WC_USBSRC, &usbsrc); + if (ret) { + dev_err(ext->dev, "Error reading usbsrc: %d\n", ret); + return ret; + } + + status = usbsrc & CHT_WC_USBSRC_STS_MASK; + if (status == CHT_WC_USBSRC_STS_SUCCESS || + status == CHT_WC_USBSRC_STS_FAIL) + break; + + msleep(50); /* Wait a bit before retrying */ + } while (time_before(jiffies, timeout)); + + if (status != CHT_WC_USBSRC_STS_SUCCESS) { + if (status == CHT_WC_USBSRC_STS_FAIL) + dev_warn(ext->dev, "Could not detect charger type\n"); + else + dev_warn(ext->dev, "Timeout detecting charger type\n"); + return EXTCON_CHG_USB_SDP; /* Save fallback */ + } + + usbsrc = (usbsrc & CHT_WC_USBSRC_TYPE_MASK) >> CHT_WC_USBSRC_TYPE_SHIFT; + switch (usbsrc) { + default: + dev_warn(ext->dev, + "Unhandled charger type %d, defaulting to SDP\n", + ret); + /* Fall through, treat as SDP */ + case CHT_WC_USBSRC_TYPE_SDP: + case CHT_WC_USBSRC_TYPE_FLOAT_DP_DN: + case CHT_WC_USBSRC_TYPE_OTHER: + return EXTCON_CHG_USB_SDP; + case CHT_WC_USBSRC_TYPE_CDP: + return EXTCON_CHG_USB_CDP; + case CHT_WC_USBSRC_TYPE_DCP: + case CHT_WC_USBSRC_TYPE_DCP_EXTPHY: + case CHT_WC_USBSRC_TYPE_MHL: /* MHL2+ delivers upto 2A, treat as DCP */ + return EXTCON_CHG_USB_DCP; + case CHT_WC_USBSRC_TYPE_ACA: + return EXTCON_CHG_USB_ACA; + } +} + +static void cht_wc_extcon_set_phymux(struct cht_wc_extcon_data *ext, u8 state) +{ + int ret; + + ret = regmap_write(ext->regmap, CHT_WC_PHYCTRL, state); + if (ret) + dev_err(ext->dev, "Error writing phyctrl: %d\n", ret); +} + +/* Small helper to sync EXTCON_CHG_USB_SDP and EXTCON_USB state */ +static void cht_wc_extcon_set_state(struct cht_wc_extcon_data *ext, + unsigned int cable, bool state) +{ + extcon_set_state_sync(ext->edev, cable, state); + if (cable == EXTCON_CHG_USB_SDP) + extcon_set_state_sync(ext->edev, EXTCON_USB, state); +} + +static void cht_wc_extcon_pwrsrc_event(struct cht_wc_extcon_data *ext) +{ + int ret, pwrsrc_sts, id; + unsigned int cable = EXTCON_NONE; + + ret = regmap_read(ext->regmap, CHT_WC_PWRSRC_STS, &pwrsrc_sts); + if (ret) { + dev_err(ext->dev, "Error reading pwrsrc status: %d\n", ret); + return; + } + + id = cht_wc_extcon_get_id(ext, pwrsrc_sts); + if (id == USB_ID_GND) { + /* The 5v boost causes a false VBUS / SDP detect, skip */ + goto charger_det_done; + } + + /* Plugged into a host/charger or not connected? */ + if (!(pwrsrc_sts & CHT_WC_PWRSRC_VBUS)) { + /* Route D+ and D- to PMIC for future charger detection */ + cht_wc_extcon_set_phymux(ext, MUX_SEL_PMIC); + goto set_state; + } + + ret = cht_wc_extcon_get_charger(ext); + if (ret >= 0) + cable = ret; + +charger_det_done: + /* Route D+ and D- to SoC for the host or gadget controller */ + cht_wc_extcon_set_phymux(ext, MUX_SEL_SOC); + +set_state: + if (cable != ext->previous_cable) { + cht_wc_extcon_set_state(ext, cable, true); + cht_wc_extcon_set_state(ext, ext->previous_cable, false); + ext->previous_cable = cable; + } + + extcon_set_state_sync(ext->edev, EXTCON_USB_HOST, + id == USB_ID_GND || id == USB_RID_A); +} + +static irqreturn_t cht_wc_extcon_isr(int irq, void *data) +{ + struct cht_wc_extcon_data *ext = data; + int ret, irqs; + + ret = regmap_read(ext->regmap, CHT_WC_PWRSRC_IRQ, &irqs); + if (ret) { + dev_err(ext->dev, "Error reading irqs: %d\n", ret); + return IRQ_NONE; + } + + cht_wc_extcon_pwrsrc_event(ext); + + ret = regmap_write(ext->regmap, CHT_WC_PWRSRC_IRQ, irqs); + if (ret) { + dev_err(ext->dev, "Error writing irqs: %d\n", ret); + return IRQ_NONE; + } + + return IRQ_HANDLED; +} + +static int cht_wc_extcon_sw_control(struct cht_wc_extcon_data *ext, bool enable) +{ + int ret, mask, val; + + mask = CHT_WC_CHGRCTRL0_SWCONTROL | CHT_WC_CHGRCTRL0_CCSM_OFF_MASK; + val = enable ? mask : 0; + ret = regmap_update_bits(ext->regmap, CHT_WC_CHGRCTRL0, mask, val); + if (ret) + dev_err(ext->dev, "Error setting sw control: %d\n", ret); + + return ret; +} + +static int cht_wc_extcon_probe(struct platform_device *pdev) +{ + struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent); + struct cht_wc_extcon_data *ext; + int irq, ret; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + ext = devm_kzalloc(&pdev->dev, sizeof(*ext), GFP_KERNEL); + if (!ext) + return -ENOMEM; + + ext->dev = &pdev->dev; + ext->regmap = pmic->regmap; + ext->previous_cable = EXTCON_NONE; + + /* Initialize extcon device */ + ext->edev = devm_extcon_dev_allocate(ext->dev, cht_wc_extcon_cables); + if (IS_ERR(ext->edev)) + return PTR_ERR(ext->edev); + + /* Enable sw control */ + ret = cht_wc_extcon_sw_control(ext, true); + if (ret) + return ret; + + /* Register extcon device */ + ret = devm_extcon_dev_register(ext->dev, ext->edev); + if (ret) { + dev_err(ext->dev, "Error registering extcon device: %d\n", ret); + goto disable_sw_control; + } + + /* Route D+ and D- to PMIC for initial charger detection */ + cht_wc_extcon_set_phymux(ext, MUX_SEL_PMIC); + + /* Get initial state */ + cht_wc_extcon_pwrsrc_event(ext); + + ret = devm_request_threaded_irq(ext->dev, irq, NULL, cht_wc_extcon_isr, + IRQF_ONESHOT, pdev->name, ext); + if (ret) { + dev_err(ext->dev, "Error requesting interrupt: %d\n", ret); + goto disable_sw_control; + } + + /* Unmask irqs */ + ret = regmap_write(ext->regmap, CHT_WC_PWRSRC_IRQ_MASK, + (int)~(CHT_WC_PWRSRC_VBUS | CHT_WC_PWRSRC_ID_GND | + CHT_WC_PWRSRC_ID_FLOAT)); + if (ret) { + dev_err(ext->dev, "Error writing irq-mask: %d\n", ret); + goto disable_sw_control; + } + + platform_set_drvdata(pdev, ext); + + return 0; + +disable_sw_control: + cht_wc_extcon_sw_control(ext, false); + return ret; +} + +static int cht_wc_extcon_remove(struct platform_device *pdev) +{ + struct cht_wc_extcon_data *ext = platform_get_drvdata(pdev); + + cht_wc_extcon_sw_control(ext, false); + + return 0; +} + +static const struct platform_device_id cht_wc_extcon_table[] = { + { .name = "cht_wcove_pwrsrc" }, + {}, +}; +MODULE_DEVICE_TABLE(platform, cht_wc_extcon_table); + +static struct platform_driver cht_wc_extcon_driver = { + .probe = cht_wc_extcon_probe, + .remove = cht_wc_extcon_remove, + .id_table = cht_wc_extcon_table, + .driver = { + .name = "cht_wcove_pwrsrc", + }, +}; +module_platform_driver(cht_wc_extcon_driver); + +MODULE_DESCRIPTION("Intel Cherrytrail Whiskey Cove PMIC extcon driver"); +MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); +MODULE_LICENSE("GPL v2"); |