diff options
author | Stefan Richter <stefanr@s5r6.in-berlin.de> | 2008-03-24 20:54:28 +0100 |
---|---|---|
committer | Stefan Richter <stefanr@s5r6.in-berlin.de> | 2008-04-18 17:55:36 +0200 |
commit | c9755e14a01987ada4063e8b4c50c2b6738d879e (patch) | |
tree | 41a593c4b9ac10ccc4ad031510438e4551e51b5b /drivers/firewire/fw-sbp2.c | |
parent | firewire: replace static ROM cache by allocated cache (diff) | |
download | linux-c9755e14a01987ada4063e8b4c50c2b6738d879e.tar.xz linux-c9755e14a01987ada4063e8b4c50c2b6738d879e.zip |
firewire: reread config ROM when device reset the bus
When a device changes its configuration ROM, it announces this with a
bus reset. firewire-core has to check which node initiated a bus reset
and whether any unit directories went away or were added on this node.
Tested with an IOI FWB-IDE01AB which has its link-on bit set if bus
power is available but does not respond to ROM read requests if self
power is off. This implements
- recognition of the units if self power is switched on after fw-core
gave up the initial attempt to read the config ROM,
- shutdown of the units when self power is switched off.
Also tested with a second PC running Linux/ieee1394. When the eth1394
driver is inserted and removed on that node, fw-core now notices the
addition and removal of the IPv4 unit on the ieee1394 node.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Diffstat (limited to 'drivers/firewire/fw-sbp2.c')
-rw-r--r-- | drivers/firewire/fw-sbp2.c | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c index e99a33fcc923..2a999373863e 100644 --- a/drivers/firewire/fw-sbp2.c +++ b/drivers/firewire/fw-sbp2.c @@ -153,6 +153,7 @@ struct sbp2_target { struct list_head lu_list; u64 management_agent_address; + u64 guid; int directory_id; int node_id; int address_high; @@ -1114,6 +1115,7 @@ static int sbp2_probe(struct device *dev) kref_init(&tgt->kref); INIT_LIST_HEAD(&tgt->lu_list); tgt->bus_id = unit->device.bus_id; + tgt->guid = (u64)device->config_rom[3] << 32 | device->config_rom[4]; if (fw_device_enable_phys_dma(device) < 0) goto fail_shost_put; @@ -1571,16 +1573,14 @@ sbp2_sysfs_ieee1394_id_show(struct device *dev, struct device_attribute *attr, { struct scsi_device *sdev = to_scsi_device(dev); struct sbp2_logical_unit *lu; - struct fw_device *device; if (!sdev) return 0; lu = sdev->hostdata; - device = fw_device(lu->tgt->unit->device.parent); - return sprintf(buf, "%08x%08x:%06x:%04x\n", - device->config_rom[3], device->config_rom[4], + return sprintf(buf, "%016llx:%06x:%04x\n", + (unsigned long long)lu->tgt->guid, lu->tgt->directory_id, lu->lun); } |