Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "This round of clk driver and framework updates is heavy on the driver
  update side. The two main highlights in the core framework are the
  addition of an bulk clk_get API that handles optional clks and an
  extra debugfs file that tells the developer about the current parent
  of a clk.

  The driver updates are dominated by i.MX in the diffstat, but that is
  mostly because that SoC has started converting to the clk_hw style of
  clk registration. The next big update is in the Amlogic meson clk
  driver that gained some support for audio, cpu, and temperature clks
  while fixing some PLL issues. Finally, the biggest thing that stands
  out is the conversion of a large part of the Allwinner sunxi-ng driver
  to the new clk parent scheme that uses less strings and more pointer
  comparisons to match clk parents and children up.

  In general, it looks like we have a lot of little fixes and tweaks
  here and there to clk data along with the normal addition of a handful
  of new drivers and a couple new core framework features.

  Core:
   - Add a 'clk_parent' file in clk debugfs
   - Add a clk_bulk_get_optional() API (with devm too)

  New Drivers:
   - Support gated clk controller on MIPS based BCM63XX SoCs
   - Support SiLabs Si5341 and Si5340 chips
   - Support for CPU clks on Raspberry Pi devices
   - Audsys clock driver for MediaTek MT8516 SoCs

  Updates:
   - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme
   - Small frequency support for SiLabs Si544 chips
   - Slow clk support for AT91 SAM9X60 SoCs
   - Remove dead code in various clk drivers (-Wunused)
   - Support for Marvell 98DX1135 SoCs
   - Get duty cycle of generic pwm clks
   - Improvement in mmc phase calculation and cleanup of some rate defintions
   - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs
   - Add GPIO, SNVS and GIC clocks for i.MX8 drivers
   - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock
   - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting
   - Add clks for new Exynos5422 Dynamic Memory Controller driver
   - Clock definition for Exynos4412 Mali
   - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3
   - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M
   - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs
   - TI clock probing done from DT by default instead of firmware
   - Fix Amlogic Meson mpll fractional part and spread sprectrum issues
   - Add Amlogic meson8 audio clocks
   - Add Amlogic g12a temperature sensors clocks
   - Add Amlogic g12a and g12b cpu clocks
   - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N
   - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W
   - Add Clock Domain support on Renesas RZ/N1"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits)
  clk: consoldiate the __clk_get_hw() declarations
  clk: sprd: Add check for return value of sprd_clk_regmap_init()
  clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK
  clk: Add Si5341/Si5340 driver
  dt-bindings: clock: Add silabs,si5341
  clk: clk-si544: Implement small frequency change support
  clk: add BCM63XX gated clock controller driver
  devicetree: document the BCM63XX gated clock bindings
  clk: at91: sckc: use dedicated functions to unregister clock
  clk: at91: sckc: improve error path for sama5d4 sck registration
  clk: at91: sckc: remove unnecessary line
  clk: at91: sckc: improve error path for sam9x5 sck register
  clk: at91: sckc: add support to free slow clock osclillator
  clk: at91: sckc: add support to free slow rc oscillator
  clk: at91: sckc: add support to free slow oscillator
  clk: rockchip: export HDMIPHY clock on rk3228
  clk: rockchip: add watchdog pclk on rk3328
  clk: rockchip: add clock id for hdmi_phy special clock on rk3228
  clk: rockchip: add clock id for watchdog pclk on rk3328
  clk: at91: sckc: add support for SAM9X60
  ...

1 files changed, 52 insertions, 11 deletions

diff --git a/drivers/firmware/ti_sci.h b/drivers/firmware/ti_sci.h
index adbeeefaca92..414e0ced5409 100644
--- a/drivers/firmware/ti_sci.h
+++ b/drivers/firmware/ti_sci.h
@@ -202,7 +202,8 @@ struct ti_sci_msg_req_set_device_resets {
  * @dev_id:	Device identifier this request is for
  * @clk_id:	Clock identifier for the device for this request.
  *		Each device has it's own set of clock inputs. This indexes
- *		which clock input to modify.
+ *		which clock input to modify. Set to 255 if clock ID is
+ *		greater than or equal to 255.
  * @request_state: Request the state for the clock to be set to.
  *		MSG_CLOCK_SW_STATE_UNREQ: The IP does not require this clock,
  *		it can be disabled, regardless of the state of the device
@@ -213,6 +214,9 @@ struct ti_sci_msg_req_set_device_resets {
  *		being required by the device.(default)
  *		MSG_CLOCK_SW_STATE_REQ:  Configure the clock to be enabled,
  *		regardless of the state of the device.
+ * @clk_id_32:	Clock identifier for the device for this request.
+ *		Only to be used if the clock ID is greater than or equal to
+ *		255.
  *
  * Normally, all required clocks are managed by TISCI entity, this is used
  * only for specific control *IF* required. Auto managed state is
@@ -234,6 +238,7 @@ struct ti_sci_msg_req_set_clock_state {
 #define MSG_CLOCK_SW_STATE_AUTO		1
 #define MSG_CLOCK_SW_STATE_REQ		2
 	u8 request_state;
+	u32 clk_id_32;
 } __packed;
 
 /**
@@ -242,7 +247,11 @@ struct ti_sci_msg_req_set_clock_state {
  * @dev_id:	Device identifier this request is for
  * @clk_id:	Clock identifier for the device for this request.
  *		Each device has it's own set of clock inputs. This indexes
- *		which clock input to get state of.
+ *		which clock input to get state of. Set to 255 if the clock
+ *		ID is greater than or equal to 255.
+ * @clk_id_32:	Clock identifier for the device for the request.
+ *		Only to be used if the clock ID is greater than or equal to
+ *		255.
  *
  * Request type is TI_SCI_MSG_GET_CLOCK_STATE, response is state
  * of the clock
@@ -251,6 +260,7 @@ struct ti_sci_msg_req_get_clock_state {
 	struct ti_sci_msg_hdr hdr;
 	u32 dev_id;
 	u8 clk_id;
+	u32 clk_id_32;
 } __packed;
 
 /**
@@ -278,9 +288,13 @@ struct ti_sci_msg_resp_get_clock_state {
  * @dev_id:	Device identifier this request is for
  * @clk_id:	Clock identifier for the device for this request.
  *		Each device has it's own set of clock inputs. This indexes
- *		which clock input to modify.
+ *		which clock input to modify. Set to 255 if clock ID is
+ *		greater than or equal to 255.
  * @parent_id:	The new clock parent is selectable by an index via this
- *		parameter.
+ *		parameter. Set to 255 if clock ID is greater than or
+ *		equal to 255.
+ * @clk_id_32:	Clock identifier if @clk_id field is 255.
+ * @parent_id_32:	Parent identifier if @parent_id is 255.
  *
  * Request type is TI_SCI_MSG_SET_CLOCK_PARENT, response is generic
  * ACK / NACK message.
@@ -290,6 +304,8 @@ struct ti_sci_msg_req_set_clock_parent {
 	u32 dev_id;
 	u8 clk_id;
 	u8 parent_id;
+	u32 clk_id_32;
+	u32 parent_id_32;
 } __packed;
 
 /**
@@ -298,7 +314,10 @@ struct ti_sci_msg_req_set_clock_parent {
  * @dev_id:	Device identifier this request is for
  * @clk_id:	Clock identifier for the device for this request.
  *		Each device has it's own set of clock inputs. This indexes
- *		which clock input to get the parent for.
+ *		which clock input to get the parent for. If this field
+ *		contains 255, the actual clock identifier is stored in
+ *		@clk_id_32.
+ * @clk_id_32:	Clock identifier if the @clk_id field contains 255.
  *
  * Request type is TI_SCI_MSG_GET_CLOCK_PARENT, response is parent information
  */
@@ -306,25 +325,32 @@ struct ti_sci_msg_req_get_clock_parent {
 	struct ti_sci_msg_hdr hdr;
 	u32 dev_id;
 	u8 clk_id;
+	u32 clk_id_32;
 } __packed;
 
 /**
  * struct ti_sci_msg_resp_get_clock_parent - Response with clock parent
  * @hdr:	Generic Header
- * @parent_id:	The current clock parent
+ * @parent_id:	The current clock parent. If set to 255, the current parent
+ *		ID can be found from the @parent_id_32 field.
+ * @parent_id_32:	Current clock parent if @parent_id field is set to
+ *			255.
  *
  * Response to TI_SCI_MSG_GET_CLOCK_PARENT.
  */
 struct ti_sci_msg_resp_get_clock_parent {
 	struct ti_sci_msg_hdr hdr;
 	u8 parent_id;
+	u32 parent_id_32;
 } __packed;
 
 /**
  * struct ti_sci_msg_req_get_clock_num_parents - Request to get clock parents
  * @hdr:	Generic header
  * @dev_id:	Device identifier this request is for
- * @clk_id:	Clock identifier for the device for this request.
+ * @clk_id:	Clock identifier for the device for this request. Set to
+ *		255 if clock ID is greater than or equal to 255.
+ * @clk_id_32:	Clock identifier if the @clk_id field contains 255.
  *
  * This request provides information about how many clock parent options
  * are available for a given clock to a device. This is typically used
@@ -337,18 +363,24 @@ struct ti_sci_msg_req_get_clock_num_parents {
 	struct ti_sci_msg_hdr hdr;
 	u32 dev_id;
 	u8 clk_id;
+	u32 clk_id_32;
 } __packed;
 
 /**
  * struct ti_sci_msg_resp_get_clock_num_parents - Response for get clk parents
  * @hdr:		Generic header
- * @num_parents:	Number of clock parents
+ * @num_parents:	Number of clock parents. If set to 255, the actual
+ *			number of parents is stored into @num_parents_32
+ *			field instead.
+ * @num_parents_32:	Number of clock parents if @num_parents field is
+ *			set to 255.
  *
  * Response to TI_SCI_MSG_GET_NUM_CLOCK_PARENTS
  */
 struct ti_sci_msg_resp_get_clock_num_parents {
 	struct ti_sci_msg_hdr hdr;
 	u8 num_parents;
+	u32 num_parents_32;
 } __packed;
 
 /**
@@ -363,7 +395,9 @@ struct ti_sci_msg_resp_get_clock_num_parents {
  * @max_freq_hz: The maximum allowable frequency in Hz. This is the maximum
  *		allowable programmed frequency and does not account for clock
  *		tolerances and jitter.
- * @clk_id:	Clock identifier for the device for this request.
+ * @clk_id:	Clock identifier for the device for this request. Set to
+ *		255 if clock identifier is greater than or equal to 255.
+ * @clk_id_32:	Clock identifier if @clk_id is set to 255.
  *
  * NOTE: Normally clock frequency management is automatically done by TISCI
  * entity. In case of specific requests, TISCI evaluates capability to achieve
@@ -380,6 +414,7 @@ struct ti_sci_msg_req_query_clock_freq {
 	u64 target_freq_hz;
 	u64 max_freq_hz;
 	u8 clk_id;
+	u32 clk_id_32;
 } __packed;
 
 /**
@@ -407,7 +442,9 @@ struct ti_sci_msg_resp_query_clock_freq {
  * @max_freq_hz: The maximum allowable frequency in Hz. This is the maximum
  *		allowable programmed frequency and does not account for clock
  *		tolerances and jitter.
- * @clk_id:	Clock identifier for the device for this request.
+ * @clk_id:	Clock identifier for the device for this request. Set to
+ *		255 if clock ID is greater than or equal to 255.
+ * @clk_id_32:	Clock identifier if @clk_id field is set to 255.
  *
  * NOTE: Normally clock frequency management is automatically done by TISCI
  * entity. In case of specific requests, TISCI evaluates capability to achieve
@@ -436,13 +473,16 @@ struct ti_sci_msg_req_set_clock_freq {
 	u64 target_freq_hz;
 	u64 max_freq_hz;
 	u8 clk_id;
+	u32 clk_id_32;
 } __packed;
 
 /**
  * struct ti_sci_msg_req_get_clock_freq - Request to get the clock frequency
  * @hdr:	Generic Header
  * @dev_id:	Device identifier this request is for
- * @clk_id:	Clock identifier for the device for this request.
+ * @clk_id:	Clock identifier for the device for this request. Set to
+ *		255 if clock ID is greater than or equal to 255.
+ * @clk_id_32:	Clock identifier if @clk_id field is set to 255.
  *
  * NOTE: Normally clock frequency management is automatically done by TISCI
  * entity. In some cases, clock frequencies are configured by host.
@@ -454,6 +494,7 @@ struct ti_sci_msg_req_get_clock_freq {
 	struct ti_sci_msg_hdr hdr;
 	u32 dev_id;
 	u8 clk_id;
+	u32 clk_id_32;
 } __packed;
 
 /**