Merge tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the bit set of char/misc drivers for 4.19-rc1

  There is a lot here, much more than normal, seems like everyone is
  writing new driver subsystems these days... Anyway, major things here
  are:

   - new FSI driver subsystem, yet-another-powerpc low-level hardware
     bus

   - gnss, finally an in-kernel GPS subsystem to try to tame all of the
     crazy out-of-tree drivers that have been floating around for years,
     combined with some really hacky userspace implementations. This is
     only for GNSS receivers, but you have to start somewhere, and this
     is great to see.

  Other than that, there are new slimbus drivers, new coresight drivers,
  new fpga drivers, and loads of DT bindings for all of these and
  existing drivers.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits)
  android: binder: Rate-limit debug and userspace triggered err msgs
  fsi: sbefifo: Bump max command length
  fsi: scom: Fix NULL dereference
  misc: mic: SCIF Fix scif_get_new_port() error handling
  misc: cxl: changed asterisk position
  genwqe: card_base: Use true and false for boolean values
  misc: eeprom: assignment outside the if statement
  uio: potential double frees if __uio_register_device() fails
  eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency
  misc: ti-st: Fix memory leak in the error path of probe()
  android: binder: Show extra_buffers_size in trace
  firmware: vpd: Fix section enabled flag on vpd_section_destroy
  platform: goldfish: Retire pdev_bus
  goldfish: Use dedicated macros instead of manual bit shifting
  goldfish: Add missing includes to goldfish.h
  mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux
  dt-bindings: mux: add adi,adgs1408
  Drivers: hv: vmbus: Cleanup synic memory free path
  Drivers: hv: vmbus: Remove use of slow_virt_to_phys()
  Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind()
  ...

1 files changed, 1440 insertions, 0 deletions

diff --git a/drivers/fsi/fsi-master-ast-cf.c b/drivers/fsi/fsi-master-ast-cf.c
new file mode 100644
index 000000000000..04d10ea8d343
--- /dev/null
+++ b/drivers/fsi/fsi-master-ast-cf.c
@@ -0,0 +1,1440 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2018 IBM Corp
+/*
+ * A FSI master controller, using a simple GPIO bit-banging interface
+ */
+
+#include <linux/crc4.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/fsi.h>
+#include <linux/gpio/consumer.h>
+#include <linux/io.h>
+#include <linux/irqflags.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/regmap.h>
+#include <linux/firmware.h>
+#include <linux/gpio/aspeed.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_address.h>
+#include <linux/genalloc.h>
+
+#include "fsi-master.h"
+#include "cf-fsi-fw.h"
+
+#define FW_FILE_NAME	"cf-fsi-fw.bin"
+
+/* Common SCU based coprocessor control registers */
+#define SCU_COPRO_CTRL			0x100
+#define   SCU_COPRO_RESET			0x00000002
+#define   SCU_COPRO_CLK_EN			0x00000001
+
+/* AST2500 specific ones */
+#define SCU_2500_COPRO_SEG0		0x104
+#define SCU_2500_COPRO_SEG1		0x108
+#define SCU_2500_COPRO_SEG2		0x10c
+#define SCU_2500_COPRO_SEG3		0x110
+#define SCU_2500_COPRO_SEG4		0x114
+#define SCU_2500_COPRO_SEG5		0x118
+#define SCU_2500_COPRO_SEG6		0x11c
+#define SCU_2500_COPRO_SEG7		0x120
+#define SCU_2500_COPRO_SEG8		0x124
+#define   SCU_2500_COPRO_SEG_SWAP		0x00000001
+#define SCU_2500_COPRO_CACHE_CTL	0x128
+#define   SCU_2500_COPRO_CACHE_EN		0x00000001
+#define   SCU_2500_COPRO_SEG0_CACHE_EN		0x00000002
+#define   SCU_2500_COPRO_SEG1_CACHE_EN		0x00000004
+#define   SCU_2500_COPRO_SEG2_CACHE_EN		0x00000008
+#define   SCU_2500_COPRO_SEG3_CACHE_EN		0x00000010
+#define   SCU_2500_COPRO_SEG4_CACHE_EN		0x00000020
+#define   SCU_2500_COPRO_SEG5_CACHE_EN		0x00000040
+#define   SCU_2500_COPRO_SEG6_CACHE_EN		0x00000080
+#define   SCU_2500_COPRO_SEG7_CACHE_EN		0x00000100
+#define   SCU_2500_COPRO_SEG8_CACHE_EN		0x00000200
+
+#define SCU_2400_COPRO_SEG0		0x104
+#define SCU_2400_COPRO_SEG2		0x108
+#define SCU_2400_COPRO_SEG4		0x10c
+#define SCU_2400_COPRO_SEG6		0x110
+#define SCU_2400_COPRO_SEG8		0x114
+#define   SCU_2400_COPRO_SEG_SWAP		0x80000000
+#define SCU_2400_COPRO_CACHE_CTL	0x118
+#define   SCU_2400_COPRO_CACHE_EN		0x00000001
+#define   SCU_2400_COPRO_SEG0_CACHE_EN		0x00000002
+#define   SCU_2400_COPRO_SEG2_CACHE_EN		0x00000004
+#define   SCU_2400_COPRO_SEG4_CACHE_EN		0x00000008
+#define   SCU_2400_COPRO_SEG6_CACHE_EN		0x00000010
+#define   SCU_2400_COPRO_SEG8_CACHE_EN		0x00000020
+
+/* CVIC registers */
+#define CVIC_EN_REG			0x10
+#define CVIC_TRIG_REG			0x18
+
+/*
+ * System register base address (needed for configuring the
+ * coldfire maps)
+ */
+#define SYSREG_BASE			0x1e600000
+
+/* Amount of SRAM required */
+#define SRAM_SIZE			0x1000
+
+#define LAST_ADDR_INVALID		0x1
+
+struct fsi_master_acf {
+	struct fsi_master	master;
+	struct device		*dev;
+	struct regmap		*scu;
+	struct mutex		lock;	/* mutex for command ordering */
+	struct gpio_desc	*gpio_clk;
+	struct gpio_desc	*gpio_data;
+	struct gpio_desc	*gpio_trans;	/* Voltage translator */
+	struct gpio_desc	*gpio_enable;	/* FSI enable */
+	struct gpio_desc	*gpio_mux;	/* Mux control */
+	uint16_t		gpio_clk_vreg;
+	uint16_t		gpio_clk_dreg;
+	uint16_t       		gpio_dat_vreg;
+	uint16_t       		gpio_dat_dreg;
+	uint16_t       		gpio_tra_vreg;
+	uint16_t       		gpio_tra_dreg;
+	uint8_t			gpio_clk_bit;
+	uint8_t			gpio_dat_bit;
+	uint8_t			gpio_tra_bit;
+	uint32_t		cf_mem_addr;
+	size_t			cf_mem_size;
+	void __iomem		*cf_mem;
+	void __iomem		*cvic;
+	struct gen_pool		*sram_pool;
+	void __iomem		*sram;
+	bool			is_ast2500;
+	bool			external_mode;
+	bool			trace_enabled;
+	uint32_t		last_addr;
+	uint8_t			t_send_delay;
+	uint8_t			t_echo_delay;
+	uint32_t		cvic_sw_irq;
+};
+#define to_fsi_master_acf(m) container_of(m, struct fsi_master_acf, master)
+
+struct fsi_msg {
+	uint64_t	msg;
+	uint8_t		bits;
+};
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/fsi_master_ast_cf.h>
+
+static void msg_push_bits(struct fsi_msg *msg, uint64_t data, int bits)
+{
+	msg->msg <<= bits;
+	msg->msg |= data & ((1ull << bits) - 1);
+	msg->bits += bits;
+}
+
+static void msg_push_crc(struct fsi_msg *msg)
+{
+	uint8_t crc;
+	int top;
+
+	top = msg->bits & 0x3;
+
+	/* start bit, and any non-aligned top bits */
+	crc = crc4(0, 1 << top | msg->msg >> (msg->bits - top), top + 1);
+
+	/* aligned bits */
+	crc = crc4(crc, msg->msg, msg->bits - top);
+
+	msg_push_bits(msg, crc, 4);
+}
+
+static void msg_finish_cmd(struct fsi_msg *cmd)
+{
+	/* Left align message */
+	cmd->msg <<= (64 - cmd->bits);
+}
+
+static bool check_same_address(struct fsi_master_acf *master, int id,
+			       uint32_t addr)
+{
+	/* this will also handle LAST_ADDR_INVALID */
+	return master->last_addr == (((id & 0x3) << 21) | (addr & ~0x3));
+}
+
+static bool check_relative_address(struct fsi_master_acf *master, int id,
+				   uint32_t addr, uint32_t *rel_addrp)
+{
+	uint32_t last_addr = master->last_addr;
+	int32_t rel_addr;
+
+	if (last_addr == LAST_ADDR_INVALID)
+		return false;
+
+	/* We may be in 23-bit addressing mode, which uses the id as the
+	 * top two address bits. So, if we're referencing a different ID,
+	 * use absolute addresses.
+	 */
+	if (((last_addr >> 21) & 0x3) != id)
+		return false;
+
+	/* remove the top two bits from any 23-bit addressing */
+	last_addr &= (1 << 21) - 1;
+
+	/* We know that the addresses are limited to 21 bits, so this won't
+	 * overflow the signed rel_addr */
+	rel_addr = addr - last_addr;
+	if (rel_addr > 255 || rel_addr < -256)
+		return false;
+
+	*rel_addrp = (uint32_t)rel_addr;
+
+	return true;
+}
+
+static void last_address_update(struct fsi_master_acf *master,
+				int id, bool valid, uint32_t addr)
+{
+	if (!valid)
+		master->last_addr = LAST_ADDR_INVALID;
+	else
+		master->last_addr = ((id & 0x3) << 21) | (addr & ~0x3);
+}
+
+/*
+ * Encode an Absolute/Relative/Same Address command
+ */
+static void build_ar_command(struct fsi_master_acf *master,
+			     struct fsi_msg *cmd, uint8_t id,
+			     uint32_t addr, size_t size,
+			     const void *data)
+{
+	int i, addr_bits, opcode_bits;
+	bool write = !!data;
+	uint8_t ds, opcode;
+	uint32_t rel_addr;
+
+	cmd->bits = 0;
+	cmd->msg = 0;
+
+	/* we have 21 bits of address max */
+	addr &= ((1 << 21) - 1);
+
+	/* cmd opcodes are variable length - SAME_AR is only two bits */
+	opcode_bits = 3;
+
+	if (check_same_address(master, id, addr)) {
+		/* we still address the byte offset within the word */
+		addr_bits = 2;
+		opcode_bits = 2;
+		opcode = FSI_CMD_SAME_AR;
+		trace_fsi_master_acf_cmd_same_addr(master);
+
+	} else if (check_relative_address(master, id, addr, &rel_addr)) {
+		/* 8 bits plus sign */
+		addr_bits = 9;
+		addr = rel_addr;
+		opcode = FSI_CMD_REL_AR;
+		trace_fsi_master_acf_cmd_rel_addr(master, rel_addr);
+
+	} else {
+		addr_bits = 21;
+		opcode = FSI_CMD_ABS_AR;
+		trace_fsi_master_acf_cmd_abs_addr(master, addr);
+	}
+
+	/*
+	 * The read/write size is encoded in the lower bits of the address
+	 * (as it must be naturally-aligned), and the following ds bit.
+	 *
+	 *	size	addr:1	addr:0	ds
+	 *	1	x	x	0
+	 *	2	x	0	1
+	 *	4	0	1	1
+	 *
+	 */
+	ds = size > 1 ? 1 : 0;
+	addr &= ~(size - 1);
+	if (size == 4)
+		addr |= 1;
+
+	msg_push_bits(cmd, id, 2);
+	msg_push_bits(cmd, opcode, opcode_bits);
+	msg_push_bits(cmd, write ? 0 : 1, 1);
+	msg_push_bits(cmd, addr, addr_bits);
+	msg_push_bits(cmd, ds, 1);
+	for (i = 0; write && i < size; i++)
+		msg_push_bits(cmd, ((uint8_t *)data)[i], 8);
+
+	msg_push_crc(cmd);
+	msg_finish_cmd(cmd);
+}
+
+static void build_dpoll_command(struct fsi_msg *cmd, uint8_t slave_id)
+{
+	cmd->bits = 0;
+	cmd->msg = 0;
+
+	msg_push_bits(cmd, slave_id, 2);
+	msg_push_bits(cmd, FSI_CMD_DPOLL, 3);
+	msg_push_crc(cmd);
+	msg_finish_cmd(cmd);
+}
+
+static void build_epoll_command(struct fsi_msg *cmd, uint8_t slave_id)
+{
+	cmd->bits = 0;
+	cmd->msg = 0;
+
+	msg_push_bits(cmd, slave_id, 2);
+	msg_push_bits(cmd, FSI_CMD_EPOLL, 3);
+	msg_push_crc(cmd);
+	msg_finish_cmd(cmd);
+}
+
+static void build_term_command(struct fsi_msg *cmd, uint8_t slave_id)
+{
+	cmd->bits = 0;
+	cmd->msg = 0;
+
+	msg_push_bits(cmd, slave_id, 2);
+	msg_push_bits(cmd, FSI_CMD_TERM, 6);
+	msg_push_crc(cmd);
+	msg_finish_cmd(cmd);
+}
+
+static int do_copro_command(struct fsi_master_acf *master, uint32_t op)
+{
+	uint32_t timeout = 10000000;
+	uint8_t stat;
+
+	trace_fsi_master_acf_copro_command(master, op);
+
+	/* Send command */
+	iowrite32be(op, master->sram + CMD_STAT_REG);
+
+	/* Ring doorbell if any */
+	if (master->cvic)
+		iowrite32(0x2, master->cvic + CVIC_TRIG_REG);
+
+	/* Wait for status to indicate completion (or error) */
+	do {
+		if (timeout-- == 0) {
+			dev_warn(master->dev,
+				 "Timeout waiting for coprocessor completion\n");
+			return -ETIMEDOUT;
+		}
+		stat = ioread8(master->sram + CMD_STAT_REG);
+	} while(stat < STAT_COMPLETE || stat == 0xff);
+
+	if (stat == STAT_COMPLETE)
+		return 0;
+	switch(stat) {
+	case STAT_ERR_INVAL_CMD:
+		return -EINVAL;
+	case STAT_ERR_INVAL_IRQ:
+		return -EIO;
+	case STAT_ERR_MTOE:
+		return -ESHUTDOWN;
+	}
+	return -ENXIO;
+}
+
+static int clock_zeros(struct fsi_master_acf *master, int count)
+{
+	while (count) {
+		int rc, lcnt = min(count, 255);
+
+		rc = do_copro_command(master,
+				      CMD_IDLE_CLOCKS | (lcnt << CMD_REG_CLEN_SHIFT));
+		if (rc)
+			return rc;
+		count -= lcnt;
+	}
+	return 0;
+}
+
+static int send_request(struct fsi_master_acf *master, struct fsi_msg *cmd,
+			unsigned int resp_bits)
+{
+	uint32_t op;
+
+	trace_fsi_master_acf_send_request(master, cmd, resp_bits);
+
+	/* Store message into SRAM */
+	iowrite32be((cmd->msg >> 32), master->sram + CMD_DATA);
+	iowrite32be((cmd->msg & 0xffffffff), master->sram + CMD_DATA + 4);
+
+	op = CMD_COMMAND;
+	op |= cmd->bits << CMD_REG_CLEN_SHIFT;
+	if (resp_bits)
+		op |= resp_bits << CMD_REG_RLEN_SHIFT;
+
+	return do_copro_command(master, op);
+}
+
+static int read_copro_response(struct fsi_master_acf *master, uint8_t size,
+			       uint32_t *response, u8 *tag)
+{
+	uint8_t rtag = ioread8(master->sram + STAT_RTAG) & 0xf;
+	uint8_t rcrc = ioread8(master->sram + STAT_RCRC) & 0xf;
+	uint32_t rdata = 0;
+	uint32_t crc;
+	uint8_t ack;
+
+	*tag = ack = rtag & 3;
+
+	/* we have a whole message now; check CRC */
+	crc = crc4(0, 1, 1);
+	crc = crc4(crc, rtag, 4);
+	if (ack == FSI_RESP_ACK && size) {
+		rdata = ioread32be(master->sram + RSP_DATA);
+		crc = crc4(crc, rdata, size);
+		if (response)
+			*response = rdata;
+	}
+	crc = crc4(crc, rcrc, 4);
+
+	trace_fsi_master_acf_copro_response(master, rtag, rcrc, rdata, crc == 0);
+
+	if (crc) {
+		/*
+		 * Check if it's all 1's or all 0's, that probably means
+		 * the host is off
+		 */
+		if ((rtag == 0xf && rcrc == 0xf) || (rtag == 0 && rcrc == 0))
+			return -ENODEV;
+		dev_dbg(master->dev, "Bad response CRC !\n");
+		return -EAGAIN;
+	}
+	return 0;
+}
+
+static int send_term(struct fsi_master_acf *master, uint8_t slave)
+{
+	struct fsi_msg cmd;
+	uint8_t tag;
+	int rc;
+
+	build_term_command(&cmd, slave);
+
+	rc = send_request(master, &cmd, 0);
+	if (rc) {
+		dev_warn(master->dev, "Error %d sending term\n", rc);
+		return rc;
+	}
+
+	rc = read_copro_response(master, 0, NULL, &tag);
+	if (rc < 0) {
+		dev_err(master->dev,
+				"TERM failed; lost communication with slave\n");
+		return -EIO;
+	} else if (tag != FSI_RESP_ACK) {
+		dev_err(master->dev, "TERM failed; response %d\n", tag);
+		return -EIO;
+	}
+	return 0;
+}
+
+static void dump_ucode_trace(struct fsi_master_acf *master)
+{
+	char trbuf[52];
+	char *p;
+	int i;
+
+	dev_dbg(master->dev,
+		"CMDSTAT:%08x RTAG=%02x RCRC=%02x RDATA=%02x #INT=%08x\n",
+		ioread32be(master->sram + CMD_STAT_REG),
+		ioread8(master->sram + STAT_RTAG),
+		ioread8(master->sram + STAT_RCRC),
+		ioread32be(master->sram + RSP_DATA),
+		ioread32be(master->sram + INT_CNT));
+
+	for (i = 0; i < 512; i++) {
+		uint8_t v;
+		if ((i % 16) == 0)
+			p = trbuf;
+		v = ioread8(master->sram + TRACEBUF + i);
+		p += sprintf(p, "%02x ", v);
+		if (((i % 16) == 15) || v == TR_END)
+			dev_dbg(master->dev, "%s\n", trbuf);
+		if (v == TR_END)
+			break;
+	}
+}
+
+static int handle_response(struct fsi_master_acf *master,
+			   uint8_t slave, uint8_t size, void *data)
+{
+	int busy_count = 0, rc;
+	int crc_err_retries = 0;
+	struct fsi_msg cmd;
+	uint32_t response;
+	uint8_t tag;
+retry:
+	rc = read_copro_response(master, size, &response, &tag);
+
+	/* Handle retries on CRC errors */
+	if (rc == -EAGAIN) {
+		/* Too many retries ? */
+		if (crc_err_retries++ > FSI_CRC_ERR_RETRIES) {
+			/*
+			 * Pass it up as a -EIO otherwise upper level will retry
+			 * the whole command which isn't what we want here.
+			 */
+			rc = -EIO;
+			goto bail;
+		}
+		trace_fsi_master_acf_crc_rsp_error(master, crc_err_retries);
+		if (master->trace_enabled)
+			dump_ucode_trace(master);
+		rc = clock_zeros(master, FSI_MASTER_EPOLL_CLOCKS);
+		if (rc) {
+			dev_warn(master->dev,
+				 "Error %d clocking zeros for E_POLL\n", rc);
+			return rc;
+		}
+		build_epoll_command(&cmd, slave);
+		rc = send_request(master, &cmd, size);
+		if (rc) {
+			dev_warn(master->dev, "Error %d sending E_POLL\n", rc);
+			return -EIO;
+		}
+		goto retry;
+	}
+	if (rc)
+		return rc;
+
+	switch (tag) {
+	case FSI_RESP_ACK:
+		if (size && data) {
+			if (size == 32)
+				*(__be32 *)data = cpu_to_be32(response);
+			else if (size == 16)
+				*(__be16 *)data = cpu_to_be16(response);
+			else
+				*(u8 *)data = response;
+		}
+		break;
+	case FSI_RESP_BUSY:
+		/*
+		 * Its necessary to clock slave before issuing
+		 * d-poll, not indicated in the hardware protocol
+		 * spec. < 20 clocks causes slave to hang, 21 ok.
+		 */
+		dev_dbg(master->dev, "Busy, retrying...\n");
+		if (master->trace_enabled)
+			dump_ucode_trace(master);
+		rc = clock_zeros(master, FSI_MASTER_DPOLL_CLOCKS);
+		if (rc) {
+			dev_warn(master->dev,
+				 "Error %d clocking zeros for D_POLL\n", rc);
+			break;
+		}
+		if (busy_count++ < FSI_MASTER_MAX_BUSY) {
+			build_dpoll_command(&cmd, slave);
+			rc = send_request(master, &cmd, size);
+			if (rc) {
+				dev_warn(master->dev, "Error %d sending D_POLL\n", rc);
+				break;
+			}
+			goto retry;
+		}
+		dev_dbg(master->dev,
+			"ERR slave is stuck in busy state, issuing TERM\n");
+		send_term(master, slave);
+		rc = -EIO;
+		break;
+
+	case FSI_RESP_ERRA:
+		dev_dbg(master->dev, "ERRA received\n");
+		if (master->trace_enabled)
+			dump_ucode_trace(master);
+		rc = -EIO;
+		break;
+	case FSI_RESP_ERRC:
+		dev_dbg(master->dev, "ERRC received\n");
+		if (master->trace_enabled)
+			dump_ucode_trace(master);
+		rc = -EAGAIN;
+		break;
+	}
+ bail:
+	if (busy_count > 0) {
+		trace_fsi_master_acf_poll_response_busy(master, busy_count);
+	}
+
+	return rc;
+}
+
+static int fsi_master_acf_xfer(struct fsi_master_acf *master, uint8_t slave,
+			       struct fsi_msg *cmd, size_t resp_len, void *resp)
+{
+	int rc = -EAGAIN, retries = 0;
+
+	resp_len <<= 3;
+	while ((retries++) < FSI_CRC_ERR_RETRIES) {
+		rc = send_request(master, cmd, resp_len);
+		if (rc) {
+			if (rc != -ESHUTDOWN)
+				dev_warn(master->dev, "Error %d sending command\n", rc);
+			break;
+		}
+		rc = handle_response(master, slave, resp_len, resp);
+		if (rc != -EAGAIN)
+			break;
+		rc = -EIO;
+		dev_dbg(master->dev, "ECRC retry %d\n", retries);
+
+		/* Pace it a bit before retry */
+		msleep(1);
+	}
+
+	return rc;
+}
+
+static int fsi_master_acf_read(struct fsi_master *_master, int link,
+			       uint8_t id, uint32_t addr, void *val,
+			       size_t size)
+{
+	struct fsi_master_acf *master = to_fsi_master_acf(_master);
+	struct fsi_msg cmd;
+	int rc;
+
+	if (link != 0)
+		return -ENODEV;
+
+	mutex_lock(&master->lock);
+	dev_dbg(master->dev, "read id %d addr %x size %zd\n", id, addr, size);
+	build_ar_command(master, &cmd, id, addr, size, NULL);
+	rc = fsi_master_acf_xfer(master, id, &cmd, size, val);
+	last_address_update(master, id, rc == 0, addr);
+	if (rc)
+		dev_dbg(master->dev, "read id %d addr 0x%08x err: %d\n",
+			id, addr, rc);
+	mutex_unlock(&master->lock);
+
+	return rc;
+}
+
+static int fsi_master_acf_write(struct fsi_master *_master, int link,
+				uint8_t id, uint32_t addr, const void *val,
+				size_t size)
+{
+	struct fsi_master_acf *master = to_fsi_master_acf(_master);
+	struct fsi_msg cmd;
+	int rc;
+
+	if (link != 0)
+		return -ENODEV;
+
+	mutex_lock(&master->lock);
+	build_ar_command(master, &cmd, id, addr, size, val);
+	dev_dbg(master->dev, "write id %d addr %x size %zd raw_data: %08x\n",
+		id, addr, size, *(uint32_t *)val);
+	rc = fsi_master_acf_xfer(master, id, &cmd, 0, NULL);
+	last_address_update(master, id, rc == 0, addr);
+	if (rc)
+		dev_dbg(master->dev, "write id %d addr 0x%08x err: %d\n",
+			id, addr, rc);
+	mutex_unlock(&master->lock);
+
+	return rc;
+}
+
+static int fsi_master_acf_term(struct fsi_master *_master,
+			       int link, uint8_t id)
+{
+	struct fsi_master_acf *master = to_fsi_master_acf(_master);
+	struct fsi_msg cmd;
+	int rc;
+
+	if (link != 0)
+		return -ENODEV;
+
+	mutex_lock(&master->lock);
+	build_term_command(&cmd, id);
+	dev_dbg(master->dev, "term id %d\n", id);
+	rc = fsi_master_acf_xfer(master, id, &cmd, 0, NULL);
+	last_address_update(master, id, false, 0);
+	mutex_unlock(&master->lock);
+
+	return rc;
+}
+
+static int fsi_master_acf_break(struct fsi_master *_master, int link)
+{
+	struct fsi_master_acf *master = to_fsi_master_acf(_master);
+	int rc;
+
+	if (link != 0)
+		return -ENODEV;
+
+	mutex_lock(&master->lock);
+	if (master->external_mode) {
+		mutex_unlock(&master->lock);
+		return -EBUSY;
+	}
+	dev_dbg(master->dev, "sending BREAK\n");
+	rc = do_copro_command(master, CMD_BREAK);
+	last_address_update(master, 0, false, 0);
+	mutex_unlock(&master->lock);
+
+	/* Wait for logic reset to take effect */
+	udelay(200);
+
+	return rc;
+}
+
+static void reset_cf(struct fsi_master_acf *master)
+{
+	regmap_write(master->scu, SCU_COPRO_CTRL, SCU_COPRO_RESET);
+	usleep_range(20,20);
+	regmap_write(master->scu, SCU_COPRO_CTRL, 0);
+	usleep_range(20,20);
+}
+
+static void start_cf(struct fsi_master_acf *master)
+{
+	regmap_write(master->scu, SCU_COPRO_CTRL, SCU_COPRO_CLK_EN);
+}
+
+static void setup_ast2500_cf_maps(struct fsi_master_acf *master)
+{
+	/*
+	 * Note about byteswap setting: the bus is wired backwards,
+	 * so setting the byteswap bit actually makes the ColdFire
+	 * work "normally" for a BE processor, ie, put the MSB in
+	 * the lowest address byte.
+	 *
+	 * We thus need to set the bit for our main memory which
+	 * contains our program code. We create two mappings for
+	 * the register, one with each setting.
+	 *
+	 * Segments 2 and 3 has a "swapped" mapping (BE)
+	 * and 6 and 7 have a non-swapped mapping (LE) which allows
+	 * us to avoid byteswapping register accesses since the
+	 * registers are all LE.
+	 */
+
+	/* Setup segment 0 to our memory region */
+	regmap_write(master->scu, SCU_2500_COPRO_SEG0, master->cf_mem_addr |
+		     SCU_2500_COPRO_SEG_SWAP);
+
+	/* Segments 2 and 3 to sysregs with byteswap (for SRAM) */
+	regmap_write(master->scu, SCU_2500_COPRO_SEG2, SYSREG_BASE |
+		     SCU_2500_COPRO_SEG_SWAP);
+	regmap_write(master->scu, SCU_2500_COPRO_SEG3, SYSREG_BASE | 0x100000 |
+		     SCU_2500_COPRO_SEG_SWAP);
+
+	/* And segment 6 and 7 to sysregs no byteswap */
+	regmap_write(master->scu, SCU_2500_COPRO_SEG6, SYSREG_BASE);
+	regmap_write(master->scu, SCU_2500_COPRO_SEG7, SYSREG_BASE | 0x100000);
+
+	/* Memory cachable, regs and SRAM not cachable */
+	regmap_write(master->scu, SCU_2500_COPRO_CACHE_CTL,
+		     SCU_2500_COPRO_SEG0_CACHE_EN | SCU_2500_COPRO_CACHE_EN);
+}
+
+static void setup_ast2400_cf_maps(struct fsi_master_acf *master)
+{
+	/* Setup segment 0 to our memory region */
+	regmap_write(master->scu, SCU_2400_COPRO_SEG0, master->cf_mem_addr |
+		     SCU_2400_COPRO_SEG_SWAP);
+
+	/* Segments 2 to sysregs with byteswap (for SRAM) */
+	regmap_write(master->scu, SCU_2400_COPRO_SEG2, SYSREG_BASE |
+		     SCU_2400_COPRO_SEG_SWAP);
+
+	/* And segment 6 to sysregs no byteswap */
+	regmap_write(master->scu, SCU_2400_COPRO_SEG6, SYSREG_BASE);
+
+	/* Memory cachable, regs and SRAM not cachable */
+	regmap_write(master->scu, SCU_2400_COPRO_CACHE_CTL,
+		     SCU_2400_COPRO_SEG0_CACHE_EN | SCU_2400_COPRO_CACHE_EN);
+}
+
+static void setup_common_fw_config(struct fsi_master_acf *master,
+				   void __iomem *base)
+{
+	iowrite16be(master->gpio_clk_vreg, base + HDR_CLOCK_GPIO_VADDR);
+	iowrite16be(master->gpio_clk_dreg, base + HDR_CLOCK_GPIO_DADDR);
+	iowrite16be(master->gpio_dat_vreg, base + HDR_DATA_GPIO_VADDR);
+	iowrite16be(master->gpio_dat_dreg, base + HDR_DATA_GPIO_DADDR);
+	iowrite16be(master->gpio_tra_vreg, base + HDR_TRANS_GPIO_VADDR);
+	iowrite16be(master->gpio_tra_dreg, base + HDR_TRANS_GPIO_DADDR);
+	iowrite8(master->gpio_clk_bit, base + HDR_CLOCK_GPIO_BIT);
+	iowrite8(master->gpio_dat_bit, base + HDR_DATA_GPIO_BIT);
+	iowrite8(master->gpio_tra_bit, base + HDR_TRANS_GPIO_BIT);
+}
+
+static void setup_ast2500_fw_config(struct fsi_master_acf *master)
+{
+	void __iomem *base = master->cf_mem + HDR_OFFSET;
+
+	setup_common_fw_config(master, base);
+	iowrite32be(FW_CONTROL_USE_STOP, base + HDR_FW_CONTROL);
+}
+
+static void setup_ast2400_fw_config(struct fsi_master_acf *master)
+{
+	void __iomem *base = master->cf_mem + HDR_OFFSET;
+
+	setup_common_fw_config(master, base);
+	iowrite32be(FW_CONTROL_CONT_CLOCK|FW_CONTROL_DUMMY_RD, base + HDR_FW_CONTROL);
+}
+
+static int setup_gpios_for_copro(struct fsi_master_acf *master)
+{
+
+	int rc;
+
+	/* This aren't under ColdFire control, just set them up appropriately */
+	gpiod_direction_output(master->gpio_mux, 1);
+	gpiod_direction_output(master->gpio_enable, 1);
+
+	/* Those are under ColdFire control, let it configure them */
+	rc = aspeed_gpio_copro_grab_gpio(master->gpio_clk, &master->gpio_clk_vreg,
+					 &master->gpio_clk_dreg, &master->gpio_clk_bit);
+	if (rc) {
+		dev_err(master->dev, "failed to assign clock gpio to coprocessor\n");
+		return rc;
+	}
+	rc = aspeed_gpio_copro_grab_gpio(master->gpio_data, &master->gpio_dat_vreg,
+					 &master->gpio_dat_dreg, &master->gpio_dat_bit);
+	if (rc) {
+		dev_err(master->dev, "failed to assign data gpio to coprocessor\n");
+		aspeed_gpio_copro_release_gpio(master->gpio_clk);
+		return rc;
+	}
+	rc = aspeed_gpio_copro_grab_gpio(master->gpio_trans, &master->gpio_tra_vreg,
+					 &master->gpio_tra_dreg, &master->gpio_tra_bit);
+	if (rc) {
+		dev_err(master->dev, "failed to assign trans gpio to coprocessor\n");
+		aspeed_gpio_copro_release_gpio(master->gpio_clk);
+		aspeed_gpio_copro_release_gpio(master->gpio_data);
+		return rc;
+	}
+	return 0;
+}
+
+static void release_copro_gpios(struct fsi_master_acf *master)
+{
+	aspeed_gpio_copro_release_gpio(master->gpio_clk);
+	aspeed_gpio_copro_release_gpio(master->gpio_data);
+	aspeed_gpio_copro_release_gpio(master->gpio_trans);
+}
+
+static int load_copro_firmware(struct fsi_master_acf *master)
+{
+	const struct firmware *fw;
+	uint16_t sig = 0, wanted_sig;
+	const u8 *data;
+	size_t size = 0;
+	int rc;
+
+	/* Get the binary */
+	rc = request_firmware(&fw, FW_FILE_NAME, master->dev);
+	if (rc) {
+		dev_err(
+			master->dev, "Error %d to load firwmare '%s' !\n",
+			rc, FW_FILE_NAME);
+		return rc;
+	}
+
+	/* Which image do we want ? (shared vs. split clock/data GPIOs) */
+	if (master->gpio_clk_vreg == master->gpio_dat_vreg)
+		wanted_sig = SYS_SIG_SHARED;
+	else
+		wanted_sig = SYS_SIG_SPLIT;
+	dev_dbg(master->dev, "Looking for image sig %04x\n", wanted_sig);
+
+	/* Try to find it */
+	for (data = fw->data; data < (fw->data + fw->size);) {
+		sig = be16_to_cpup((__be16 *)(data + HDR_OFFSET + HDR_SYS_SIG));
+		size = be32_to_cpup((__be32 *)(data + HDR_OFFSET + HDR_FW_SIZE));
+		if (sig == wanted_sig)
+			break;
+		data += size;
+	}
+	if (sig != wanted_sig) {
+		dev_err(master->dev, "Failed to locate image sig %04x in FW blob\n",
+			wanted_sig);
+		rc = -ENODEV;
+		goto release_fw;
+	}
+	if (size > master->cf_mem_size) {
+		dev_err(master->dev, "FW size (%zd) bigger than memory reserve (%zd)\n",
+			fw->size, master->cf_mem_size);
+		rc = -ENOMEM;
+	} else {
+		memcpy_toio(master->cf_mem, data, size);
+	}
+
+release_fw:
+	release_firmware(fw);
+	return rc;
+}
+
+static int check_firmware_image(struct fsi_master_acf *master)
+{
+	uint32_t fw_vers, fw_api, fw_options;
+
+	fw_vers = ioread16be(master->cf_mem + HDR_OFFSET + HDR_FW_VERS);
+	fw_api = ioread16be(master->cf_mem + HDR_OFFSET + HDR_API_VERS);
+	fw_options = ioread32be(master->cf_mem + HDR_OFFSET + HDR_FW_OPTIONS);
+	master->trace_enabled = !!(fw_options & FW_OPTION_TRACE_EN);
+
+	/* Check version and signature */
+	dev_info(master->dev, "ColdFire initialized, firmware v%d API v%d.%d (trace %s)\n",
+		 fw_vers, fw_api >> 8, fw_api & 0xff,
+		 master->trace_enabled ? "enabled" : "disabled");
+
+	if ((fw_api >> 8) != API_VERSION_MAJ) {
+		dev_err(master->dev, "Unsupported coprocessor API version !\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int copro_enable_sw_irq(struct fsi_master_acf *master)
+{
+	int timeout;
+	uint32_t val;
+
+	/*
+	 * Enable coprocessor interrupt input. I've had problems getting the
+	 * value to stick, so try in a loop
+	 */
+	for (timeout = 0; timeout < 10; timeout++) {
+		iowrite32(0x2, master->cvic + CVIC_EN_REG);
+		val = ioread32(master->cvic + CVIC_EN_REG);
+		if (val & 2)
+			break;
+		msleep(1);
+	}
+	if (!(val & 2)) {
+		dev_err(master->dev, "Failed to enable coprocessor interrupt !\n");
+		return -ENODEV;
+	}
+	return 0;
+}
+
+static int fsi_master_acf_setup(struct fsi_master_acf *master)
+{
+	int timeout, rc;
+	uint32_t val;
+
+	/* Make sure the ColdFire is stopped  */
+	reset_cf(master);
+
+	/*
+	 * Clear SRAM. This needs to happen before we setup the GPIOs
+	 * as we might start trying to arbitrate as soon as that happens.
+	 */
+	memset_io(master->sram, 0, SRAM_SIZE);
+
+	/* Configure GPIOs */
+	rc = setup_gpios_for_copro(master);
+	if (rc)
+		return rc;
+
+	/* Load the firmware into the reserved memory */
+	rc = load_copro_firmware(master);
+	if (rc)
+		return rc;
+
+	/* Read signature and check versions */
+	rc = check_firmware_image(master);
+	if (rc)
+		return rc;
+
+	/* Setup coldfire memory map */
+	if (master->is_ast2500) {
+		setup_ast2500_cf_maps(master);
+		setup_ast2500_fw_config(master);
+	} else {
+		setup_ast2400_cf_maps(master);
+		setup_ast2400_fw_config(master);
+	}
+
+	/* Start the ColdFire */
+	start_cf(master);
+
+	/* Wait for status register to indicate command completion
+	 * which signals the initialization is complete
+	 */
+	for (timeout = 0; timeout < 10; timeout++) {
+		val = ioread8(master->sram + CF_STARTED);
+		if (val)
+			break;
+		msleep(1);
+	}
+	if (!val) {
+		dev_err(master->dev, "Coprocessor startup timeout !\n");
+		rc = -ENODEV;
+		goto err;
+	}
+
+	/* Configure echo & send delay */
+	iowrite8(master->t_send_delay, master->sram + SEND_DLY_REG);
+	iowrite8(master->t_echo_delay, master->sram + ECHO_DLY_REG);
+
+	/* Enable SW interrupt to copro if any */
+	if (master->cvic) {
+		rc = copro_enable_sw_irq(master);
+		if (rc)
+			goto err;
+	}
+	return 0;
+ err:
+	/* An error occurred, don't leave the coprocessor running */
+	reset_cf(master);
+
+	/* Release the GPIOs */
+	release_copro_gpios(master);
+
+	return rc;
+}
+
+
+static void fsi_master_acf_terminate(struct fsi_master_acf *master)
+{
+	unsigned long flags;
+
+	/*
+	 * A GPIO arbitration requestion could come in while this is
+	 * happening. To avoid problems, we disable interrupts so it
+	 * cannot preempt us on this CPU
+	 */
+
+	local_irq_save(flags);
+
+	/* Stop the coprocessor */
+	reset_cf(master);
+
+	/* We mark the copro not-started */
+	iowrite32(0, master->sram + CF_STARTED);
+
+	/* We mark the ARB register as having given up arbitration to
+	 * deal with a potential race with the arbitration request
+	 */
+	iowrite8(ARB_ARM_ACK, master->sram + ARB_REG);
+
+	local_irq_restore(flags);
+
+	/* Return the GPIOs to the ARM */
+	release_copro_gpios(master);
+}
+
+static void fsi_master_acf_setup_external(struct fsi_master_acf *master)
+{
+	/* Setup GPIOs for external FSI master (FSP box) */
+	gpiod_direction_output(master->gpio_mux, 0);
+	gpiod_direction_output(master->gpio_trans, 0);
+	gpiod_direction_output(master->gpio_enable, 1);
+	gpiod_direction_input(master->gpio_clk);
+	gpiod_direction_input(master->gpio_data);
+}
+
+static int fsi_master_acf_link_enable(struct fsi_master *_master, int link)
+{
+	struct fsi_master_acf *master = to_fsi_master_acf(_master);
+	int rc = -EBUSY;
+
+	if (link != 0)
+		return -ENODEV;
+
+	mutex_lock(&master->lock);
+	if (!master->external_mode) {
+		gpiod_set_value(master->gpio_enable, 1);
+		rc = 0;
+	}
+	mutex_unlock(&master->lock);
+
+	return rc;
+}
+
+static int fsi_master_acf_link_config(struct fsi_master *_master, int link,
+				      u8 t_send_delay, u8 t_echo_delay)
+{
+	struct fsi_master_acf *master = to_fsi_master_acf(_master);
+
+	if (link != 0)
+		return -ENODEV;
+
+	mutex_lock(&master->lock);
+	master->t_send_delay = t_send_delay;
+	master->t_echo_delay = t_echo_delay;
+	dev_dbg(master->dev, "Changing delays: send=%d echo=%d\n",
+		t_send_delay, t_echo_delay);
+	iowrite8(master->t_send_delay, master->sram + SEND_DLY_REG);
+	iowrite8(master->t_echo_delay, master->sram + ECHO_DLY_REG);
+	mutex_unlock(&master->lock);
+
+	return 0;
+}
+
+static ssize_t external_mode_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct fsi_master_acf *master = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE - 1, "%u\n",
+			master->external_mode ? 1 : 0);
+}
+
+static ssize_t external_mode_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct fsi_master_acf *master = dev_get_drvdata(dev);
+	unsigned long val;
+	bool external_mode;
+	int err;
+
+	err = kstrtoul(buf, 0, &val);
+	if (err)
+		return err;
+
+	external_mode = !!val;
+
+	mutex_lock(&master->lock);
+
+	if (external_mode == master->external_mode) {
+		mutex_unlock(&master->lock);
+		return count;
+	}
+
+	master->external_mode = external_mode;
+	if (master->external_mode) {
+		fsi_master_acf_terminate(master);
+		fsi_master_acf_setup_external(master);
+	} else
+		fsi_master_acf_setup(master);
+
+	mutex_unlock(&master->lock);
+
+	fsi_master_rescan(&master->master);
+
+	return count;
+}
+
+static DEVICE_ATTR(external_mode, 0664,
+		external_mode_show, external_mode_store);
+
+static int fsi_master_acf_gpio_request(void *data)
+{
+	struct fsi_master_acf *master = data;
+	int timeout;
+	u8 val;
+
+	/* Note: This doesn't require holding out mutex */
+
+	/* Write reqest */
+	iowrite8(ARB_ARM_REQ, master->sram + ARB_REG);
+
+	/*
+	 * There is a race (which does happen at boot time) when we get an
+	 * arbitration request as we are either about to or just starting
+	 * the coprocessor.
+	 *
+	 * To handle it, we first check if we are running. If not yet we
+	 * check whether the copro is started in the SCU.
+	 *
+	 * If it's not started, we can basically just assume we have arbitration
+	 * and return. Otherwise, we wait normally expecting for the arbitration
+	 * to eventually complete.
+	 */
+	if (ioread32(master->sram + CF_STARTED) == 0) {
+		unsigned int reg = 0;
+
+		regmap_read(master->scu, SCU_COPRO_CTRL, &reg);
+		if (!(reg & SCU_COPRO_CLK_EN))
+			return 0;
+	}
+
+	/* Ring doorbell if any */
+	if (master->cvic)
+		iowrite32(0x2, master->cvic + CVIC_TRIG_REG);
+
+	for (timeout = 0; timeout < 10000; timeout++) {
+		val = ioread8(master->sram + ARB_REG);
+		if (val != ARB_ARM_REQ)
+			break;
+		udelay(1);
+	}
+
+	/* If it failed, override anyway */
+	if (val != ARB_ARM_ACK)
+		dev_warn(master->dev, "GPIO request arbitration timeout\n");
+
+	return 0;
+}
+
+static int fsi_master_acf_gpio_release(void *data)
+{
+	struct fsi_master_acf *master = data;
+
+	/* Write release */
+	iowrite8(0, master->sram + ARB_REG);
+
+	/* Ring doorbell if any */
+	if (master->cvic)
+		iowrite32(0x2, master->cvic + CVIC_TRIG_REG);
+
+	return 0;
+}
+
+static void fsi_master_acf_release(struct device *dev)
+{
+	struct fsi_master_acf *master = to_fsi_master_acf(dev_to_fsi_master(dev));
+
+	/* Cleanup, stop coprocessor */
+	mutex_lock(&master->lock);
+	fsi_master_acf_terminate(master);
+	aspeed_gpio_copro_set_ops(NULL, NULL);
+	mutex_unlock(&master->lock);
+
+	/* Free resources */
+	gen_pool_free(master->sram_pool, (unsigned long)master->sram, SRAM_SIZE);
+	of_node_put(dev_of_node(master->dev));
+
+	kfree(master);
+}
+
+static const struct aspeed_gpio_copro_ops fsi_master_acf_gpio_ops = {
+	.request_access = fsi_master_acf_gpio_request,
+	.release_access = fsi_master_acf_gpio_release,
+};
+
+static int fsi_master_acf_probe(struct platform_device *pdev)
+{
+	struct device_node *np, *mnode = dev_of_node(&pdev->dev);
+	struct genpool_data_fixed gpdf;
+	struct fsi_master_acf *master;
+	struct gpio_desc *gpio;
+	struct resource res;
+	uint32_t cf_mem_align;
+	int rc;
+
+	master = kzalloc(sizeof(*master), GFP_KERNEL);
+	if (!master)
+		return -ENOMEM;
+
+	master->dev = &pdev->dev;
+	master->master.dev.parent = master->dev;
+	master->last_addr = LAST_ADDR_INVALID;
+
+	/* AST2400 vs. AST2500 */
+	master->is_ast2500 = of_device_is_compatible(mnode, "aspeed,ast2500-cf-fsi-master");
+
+	/* Grab the SCU, we'll need to access it to configure the coprocessor */
+	if (master->is_ast2500)
+		master->scu = syscon_regmap_lookup_by_compatible("aspeed,ast2500-scu");
+	else
+		master->scu = syscon_regmap_lookup_by_compatible("aspeed,ast2400-scu");
+	if (IS_ERR(master->scu)) {
+		dev_err(&pdev->dev, "failed to find SCU regmap\n");
+		rc = PTR_ERR(master->scu);
+		goto err_free;
+	}
+
+	/* Grab all the GPIOs we need */
+	gpio = devm_gpiod_get(&pdev->dev, "clock", 0);
+	if (IS_ERR(gpio)) {
+		dev_err(&pdev->dev, "failed to get clock gpio\n");
+		rc = PTR_ERR(gpio);
+		goto err_free;
+	}
+	master->gpio_clk = gpio;
+
+	gpio = devm_gpiod_get(&pdev->dev, "data", 0);
+	if (IS_ERR(gpio)) {
+		dev_err(&pdev->dev, "failed to get data gpio\n");
+		rc = PTR_ERR(gpio);
+		goto err_free;
+	}
+	master->gpio_data = gpio;
+
+	/* Optional GPIOs */
+	gpio = devm_gpiod_get_optional(&pdev->dev, "trans", 0);
+	if (IS_ERR(gpio)) {
+		dev_err(&pdev->dev, "failed to get trans gpio\n");
+		rc = PTR_ERR(gpio);
+		goto err_free;
+	}
+	master->gpio_trans = gpio;
+
+	gpio = devm_gpiod_get_optional(&pdev->dev, "enable", 0);
+	if (IS_ERR(gpio)) {
+		dev_err(&pdev->dev, "failed to get enable gpio\n");
+		rc = PTR_ERR(gpio);
+		goto err_free;
+	}
+	master->gpio_enable = gpio;
+
+	gpio = devm_gpiod_get_optional(&pdev->dev, "mux", 0);
+	if (IS_ERR(gpio)) {
+		dev_err(&pdev->dev, "failed to get mux gpio\n");
+		rc = PTR_ERR(gpio);
+		goto err_free;
+	}
+	master->gpio_mux = gpio;
+
+	/* Grab the reserved memory region (use DMA API instead ?) */
+	np = of_parse_phandle(mnode, "memory-region", 0);
+	if (!np) {
+		dev_err(&pdev->dev, "Didn't find reserved memory\n");
+		rc = -EINVAL;
+		goto err_free;
+	}
+	rc = of_address_to_resource(np, 0, &res);
+	of_node_put(np);
+	if (rc) {
+		dev_err(&pdev->dev, "Couldn't address to resource for reserved memory\n");
+		rc = -ENOMEM;
+		goto err_free;
+	}
+	master->cf_mem_size = resource_size(&res);
+	master->cf_mem_addr = (uint32_t)res.start;
+	cf_mem_align = master->is_ast2500 ? 0x00100000 : 0x00200000;
+	if (master->cf_mem_addr & (cf_mem_align - 1)) {
+		dev_err(&pdev->dev, "Reserved memory has insufficient alignment\n");
+		rc = -ENOMEM;
+		goto err_free;
+	}
+	master->cf_mem = devm_ioremap_resource(&pdev->dev, &res);
+ 	if (IS_ERR(master->cf_mem)) {
+		rc = PTR_ERR(master->cf_mem);
+		dev_err(&pdev->dev, "Error %d mapping coldfire memory\n", rc);
+ 		goto err_free;
+	}
+	dev_dbg(&pdev->dev, "DRAM allocation @%x\n", master->cf_mem_addr);
+
+	/* AST2500 has a SW interrupt to the coprocessor */
+	if (master->is_ast2500) {
+		/* Grab the CVIC (ColdFire interrupts controller) */
+		np = of_parse_phandle(mnode, "aspeed,cvic", 0);
+		if (!np) {
+			dev_err(&pdev->dev, "Didn't find CVIC\n");
+			rc = -EINVAL;
+			goto err_free;
+		}
+		master->cvic = devm_of_iomap(&pdev->dev, np, 0, NULL);
+		if (IS_ERR(master->cvic)) {
+			rc = PTR_ERR(master->cvic);
+			dev_err(&pdev->dev, "Error %d mapping CVIC\n", rc);
+			goto err_free;
+		}
+		rc = of_property_read_u32(np, "copro-sw-interrupts",
+					  &master->cvic_sw_irq);
+		if (rc) {
+			dev_err(&pdev->dev, "Can't find coprocessor SW interrupt\n");
+			goto err_free;
+		}
+	}
+
+	/* Grab the SRAM */
+	master->sram_pool = of_gen_pool_get(dev_of_node(&pdev->dev), "aspeed,sram", 0);
+	if (!master->sram_pool) {
+		rc = -ENODEV;
+		dev_err(&pdev->dev, "Can't find sram pool\n");
+		goto err_free;
+	}
+
+	/* Current microcode only deals with fixed location in SRAM */
+	gpdf.offset = 0;
+	master->sram = (void __iomem *)gen_pool_alloc_algo(master->sram_pool, SRAM_SIZE,
+							   gen_pool_fixed_alloc, &gpdf);
+	if (!master->sram) {
+		rc = -ENOMEM;
+		dev_err(&pdev->dev, "Failed to allocate sram from pool\n");
+		goto err_free;
+	}
+	dev_dbg(&pdev->dev, "SRAM allocation @%lx\n",
+		(unsigned long)gen_pool_virt_to_phys(master->sram_pool,
+						     (unsigned long)master->sram));
+
+	/*
+	 * Hookup with the GPIO driver for arbitration of GPIO banks
+	 * ownership.
+	 */
+	aspeed_gpio_copro_set_ops(&fsi_master_acf_gpio_ops, master);
+
+	/* Default FSI command delays */
+	master->t_send_delay = FSI_SEND_DELAY_CLOCKS;
+	master->t_echo_delay = FSI_ECHO_DELAY_CLOCKS;
+	master->master.n_links = 1;
+	if (master->is_ast2500)
+		master->master.flags = FSI_MASTER_FLAG_SWCLOCK;
+	master->master.read = fsi_master_acf_read;
+	master->master.write = fsi_master_acf_write;
+	master->master.term = fsi_master_acf_term;
+	master->master.send_break = fsi_master_acf_break;
+	master->master.link_enable = fsi_master_acf_link_enable;
+	master->master.link_config = fsi_master_acf_link_config;
+	master->master.dev.of_node = of_node_get(dev_of_node(master->dev));
+	master->master.dev.release = fsi_master_acf_release;
+	platform_set_drvdata(pdev, master);
+	mutex_init(&master->lock);
+
+	mutex_lock(&master->lock);
+	rc = fsi_master_acf_setup(master);
+	mutex_unlock(&master->lock);
+	if (rc)
+		goto release_of_dev;
+
+	rc = device_create_file(&pdev->dev, &dev_attr_external_mode);
+	if (rc)
+		goto stop_copro;
+
+	rc = fsi_master_register(&master->master);
+	if (!rc)
+		return 0;
+
+	device_remove_file(master->dev, &dev_attr_external_mode);
+	put_device(&master->master.dev);
+	return rc;
+
+ stop_copro:
+	fsi_master_acf_terminate(master);
+ release_of_dev:
+	aspeed_gpio_copro_set_ops(NULL, NULL);
+	gen_pool_free(master->sram_pool, (unsigned long)master->sram, SRAM_SIZE);
+	of_node_put(dev_of_node(master->dev));
+ err_free:
+	kfree(master);
+	return rc;
+}
+
+
+static int fsi_master_acf_remove(struct platform_device *pdev)
+{
+	struct fsi_master_acf *master = platform_get_drvdata(pdev);
+
+	device_remove_file(master->dev, &dev_attr_external_mode);
+
+	fsi_master_unregister(&master->master);
+
+	return 0;
+}
+
+static const struct of_device_id fsi_master_acf_match[] = {
+	{ .compatible = "aspeed,ast2400-cf-fsi-master" },
+	{ .compatible = "aspeed,ast2500-cf-fsi-master" },
+	{ },
+};
+
+static struct platform_driver fsi_master_acf = {
+	.driver = {
+		.name		= "fsi-master-acf",
+		.of_match_table	= fsi_master_acf_match,
+	},
+	.probe	= fsi_master_acf_probe,
+	.remove = fsi_master_acf_remove,
+};
+
+module_platform_driver(fsi_master_acf);
+MODULE_LICENSE("GPL");