Merge tag 'gpio-v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for kernel v4.6.  There is quite a
  lot of interesting stuff going on.

  The patches to other subsystems and arch-wide are ACKed as far as
  possible, though I consider things like per-arch <asm/gpio.h> as
  essentially a part of the GPIO subsystem so it should not be needed.

  Core changes:

   - The gpio_chip is now a *real device*.  Until now the gpio chips
     were just piggybacking the parent device or (gasp) floating in
     space outside of the device model.

     We now finally make GPIO chips devices.  The gpio_chip will create
     a gpio_device which contains a struct device, and this gpio_device
     struct is kept private.  Anything that needs to be kept private
     from the rest of the kernel will gradually be moved over to the
     gpio_device.

   - As a result of making the gpio_device a real device, we have added
     resource management, so devm_gpiochip_add_data() will cut down on
     overhead and reduce code lines.  A huge slew of patches convert
     almost all drivers in the subsystem to use this.

   - Building on making the GPIO a real device, we add the first step of
     a new userspace ABI: the GPIO character device.  We take small
     steps here, so we first add a pure *information* ABI and the tool
     "lsgpio" that will list all GPIO devices on the system and all
     lines on these devices.

     We can now discover GPIOs properly from userspace.  We still have
     not come up with a way to actually *use* GPIOs from userspace.

   - To encourage people to use the character device for the future, we
     have it always-enabled when using GPIO.  The old sysfs ABI is still
     opt-in (and can be used in parallel), but is marked as deprecated.

     We will keep it around for the foreseeable future, but it will not
     be extended to cover ever more use cases.

  Cleanup:

   - Bjorn Helgaas removed a whole slew of per-architecture <asm/gpio.h>
     includes.

     This dates back to when GPIO was an opt-in feature and no shared
     library even existed: just a header file with proper prototypes was
     provided and all semantics were up to the arch to implement.  These
     patches make the GPIO chip even more a proper device and cleans out
     leftovers of the old in-kernel API here and there.

     Still some cruft is left but it's very little now.

   - There is still some clamping of return values for .get() going on,
     but we now return sane values in the vast majority of drivers and
     the errorpath is sanitized.  Some patches for powerpc, blackfin and
     unicore still drop in.

   - We continue to switch the ARM, MIPS, blackfin, m68k local GPIO
     implementations to use gpiochip_add_data() and cut down on code
     lines.

   - MPC8xxx is converted to use the generic GPIO helpers.

   - ATH79 is converted to use the generic GPIO helpers.

  New drivers:

   - WinSystems WS16C48

   - Acces 104-DIO-48E

   - F81866 (a F7188x variant)

   - Qoric (a MPC8xxx variant)

   - TS-4800

   - SPI serializers (pisosr): simple 74xx shift registers connected to
     SPI to obtain a dirt-cheap output-only GPIO expander.

   - Texas Instruments TPIC2810

   - Texas Instruments TPS65218

   - Texas Instruments TPS65912

   - X-Gene (ARM64) standby GPIO controller"

* tag 'gpio-v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (194 commits)
  Revert "Share upstreaming patches"
  gpio: mcp23s08: Fix clearing of interrupt.
  gpiolib: Fix comment referring to gpio_*() in gpiod_*()
  gpio: pca953x: Fix pca953x_gpio_set_multiple() on 64-bit
  gpio: xgene: Fix kconfig for standby GIPO contoller
  gpio: Add generic serializer DT binding
  gpio: uapi: use 0xB4 as ioctl() major
  gpio: tps65912: fix bad merge
  Revert "gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free"
  gpio: omap: drop dev field from gpio_bank structure
  gpio: mpc8xxx: Slightly update the code for better readability
  gpio: mpc8xxx: Remove *read_reg and *write_reg from struct mpc8xxx_gpio_chip
  gpio: mpc8xxx: Fixup setting gpio direction output
  gpio: mcp23s08: Add support for mcp23s18
  dt-bindings: gpio: altera: Fix altr,interrupt-type property
  gpio: add driver for MEN 16Z127 GPIO controller
  gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free
  gpio: timberdale: Switch to devm_ioremap_resource()
  gpio: ts4800: Add IMX51 dependency
  gpiolib: rewrite gpiodev_add_to_list
  ...

1 files changed, 81 insertions, 0 deletions

diff --git a/drivers/gpio/gpio-ts4800.c b/drivers/gpio/gpio-ts4800.c
new file mode 100644
index 000000000000..0c144a72f9af
--- /dev/null
+++ b/drivers/gpio/gpio-ts4800.c
@@ -0,0 +1,81 @@
+/*
+ * GPIO driver for the TS-4800 board
+ *
+ * Copyright (c) 2016 - Savoir-faire Linux
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#define DEFAULT_PIN_NUMBER      16
+#define INPUT_REG_OFFSET        0x00
+#define OUTPUT_REG_OFFSET       0x02
+#define DIRECTION_REG_OFFSET    0x04
+
+static int ts4800_gpio_probe(struct platform_device *pdev)
+{
+	struct device_node *node;
+	struct gpio_chip *chip;
+	struct resource *res;
+	void __iomem *base_addr;
+	int retval;
+	u32 ngpios;
+
+	chip = devm_kzalloc(&pdev->dev, sizeof(struct gpio_chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base_addr = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(base_addr))
+		return PTR_ERR(base_addr);
+
+	node = pdev->dev.of_node;
+	if (!node)
+		return -EINVAL;
+
+	retval = of_property_read_u32(node, "ngpios", &ngpios);
+	if (retval == -EINVAL)
+		ngpios = DEFAULT_PIN_NUMBER;
+	else if (retval)
+		return retval;
+
+	retval = bgpio_init(chip, &pdev->dev, 2, base_addr + INPUT_REG_OFFSET,
+			    base_addr + OUTPUT_REG_OFFSET, NULL,
+			    base_addr + DIRECTION_REG_OFFSET, NULL, 0);
+	if (retval) {
+		dev_err(&pdev->dev, "bgpio_init failed\n");
+		return retval;
+	}
+
+	chip->ngpio = ngpios;
+
+	platform_set_drvdata(pdev, chip);
+
+	return devm_gpiochip_add_data(&pdev->dev, chip, NULL);
+}
+
+static const struct of_device_id ts4800_gpio_of_match[] = {
+	{ .compatible = "technologic,ts4800-gpio", },
+	{},
+};
+
+static struct platform_driver ts4800_gpio_driver = {
+	.driver = {
+		   .name = "ts4800-gpio",
+		   .of_match_table = ts4800_gpio_of_match,
+		   },
+	.probe = ts4800_gpio_probe,
+};
+
+module_platform_driver_probe(ts4800_gpio_driver, ts4800_gpio_probe);
+
+MODULE_AUTHOR("Julien Grossholtz <julien.grossholtz@savoirfairelinux.com>");
+MODULE_DESCRIPTION("TS4800 FPGA GPIO driver");
+MODULE_LICENSE("GPL v2");