Merge tag 'gpio-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.13 series.

  Some administrativa:

  I have a slew of 8250 serial patches and the new IOT2040 serial+GPIO
  driver coming in through this tree, along with a whole bunch of Exar
  8250 fixes. These are ACKed by Greg and also hit drivers/platform/*
  where they are ACKed by Andy Shevchenko.

  Speaking about drivers/platform/* there is also a bunch of ACPI stuff
  coming through that route, again ACKed by Andy.

  The MCP23S08 changes are coming in here as well. You already have the
  commits in your tree, so this is just a result of sharing an immutable
  branch between pin control and GPIO.

  Core:
   - Export add/remove for lookup tables so that modules can export GPIO
     descriptor tables.
   - Handle GPIO sleep states: it is now possible to flag that a GPIO
     line may loose its state during suspend/resume of the system to
     save power. This is used in the Wolfson Micro Arizona driver.
   - ACPI-based GPIO was tightened up a lot around the edges.
   - Use bitmap_fill() to speed up a loop.

  New drivers:
   - Exar XRA1403 SPI-based GPIO.
   - MVEBU driver now supports Armada 7K and 8K.
   - LP87565 PMIC GPIO.
   - Renesas R-CAR R8A7743 (RZ/G1M).
   - The new IOT2040 8250 serial/GPIO also comes in through this
     changeset.

  Substantial driver changes:
   - Seriously fix the Exar 8250 GPIO portions to work.
   - The MCP23S08 was moved out to a pin control driver.
   - Convert MEVEBU to use regmap for register access.
   - Drop Vulcan support from the Broadcom driver.
   - Serious cleanup and improvement of the mockup driver, giving us a
     better test coverage.

  Misc:
   - Lots of janitorial clean up.
   - A bunch of documentation fixes"

* tag 'gpio-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (70 commits)
  serial: exar: Add support for IOT2040 device
  gpio-exar/8250-exar: Make set of exported GPIOs configurable
  platform: Accept const properties
  serial: exar: Factor out platform hooks
  gpio-exar/8250-exar: Rearrange gpiochip parenthood
  gpio: exar: Fix iomap request
  gpio-exar/8250-exar: Do not even instantiate a GPIO device for Commtech cards
  serial: uapi: Add support for bus termination
  gpio: rcar: Add R8A7743 (RZ/G1M) support
  gpio: gpio-wcove: Fix GPIO control register offset calculation
  gpio: lp87565: Add support for GPIO
  gpio: dwapb: fix missing first irq for edgeboth irq type
  MAINTAINERS: Take maintainership for GPIO ACPI support
  gpio: exar: Fix reading of directions and values
  gpio: exar: Allocate resources on behalf of the platform device
  gpio-exar/8250-exar: Fix passing in of parent PCI device
  gpio: mockup: use devm_kcalloc() where applicable
  gpio: mockup: add myself as author
  gpio: mockup: improve the error message
  gpio: mockup: don't return magic numbers from probe()
  ...

1 files changed, 112 insertions, 73 deletions

diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
index 8fa5fcd00e9a..c9b42dd12dfa 100644
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -165,6 +165,23 @@ static void acpi_gpio_chip_dh(acpi_handle handle, void *data)
 	/* The address of this function is used as a key. */
 }
 
+bool acpi_gpio_get_irq_resource(struct acpi_resource *ares,
+				struct acpi_resource_gpio **agpio)
+{
+	struct acpi_resource_gpio *gpio;
+
+	if (ares->type != ACPI_RESOURCE_TYPE_GPIO)
+		return false;
+
+	gpio = &ares->data.gpio;
+	if (gpio->connection_type != ACPI_RESOURCE_GPIO_TYPE_INT)
+		return false;
+
+	*agpio = gpio;
+	return true;
+}
+EXPORT_SYMBOL_GPL(acpi_gpio_get_irq_resource);
+
 static acpi_status acpi_gpiochip_request_interrupt(struct acpi_resource *ares,
 						   void *context)
 {
@@ -178,11 +195,7 @@ static acpi_status acpi_gpiochip_request_interrupt(struct acpi_resource *ares,
 	unsigned long irqflags;
 	int ret, pin, irq;
 
-	if (ares->type != ACPI_RESOURCE_TYPE_GPIO)
-		return AE_OK;
-
-	agpio = &ares->data.gpio;
-	if (agpio->connection_type != ACPI_RESOURCE_GPIO_TYPE_INT)
+	if (!acpi_gpio_get_irq_resource(ares, &agpio))
 		return AE_OK;
 
 	handle = ACPI_HANDLE(chip->parent);
@@ -423,6 +436,59 @@ static bool acpi_get_driver_gpio_data(struct acpi_device *adev,
 	return false;
 }
 
+static enum gpiod_flags
+acpi_gpio_to_gpiod_flags(const struct acpi_resource_gpio *agpio)
+{
+	bool pull_up = agpio->pin_config == ACPI_PIN_CONFIG_PULLUP;
+
+	switch (agpio->io_restriction) {
+	case ACPI_IO_RESTRICT_INPUT:
+		return GPIOD_IN;
+	case ACPI_IO_RESTRICT_OUTPUT:
+		/*
+		 * ACPI GPIO resources don't contain an initial value for the
+		 * GPIO. Therefore we deduce that value from the pull field
+		 * instead. If the pin is pulled up we assume default to be
+		 * high, otherwise low.
+		 */
+		return pull_up ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW;
+	default:
+		/*
+		 * Assume that the BIOS has configured the direction and pull
+		 * accordingly.
+		 */
+		return GPIOD_ASIS;
+	}
+}
+
+int
+acpi_gpio_update_gpiod_flags(enum gpiod_flags *flags, enum gpiod_flags update)
+{
+	int ret = 0;
+
+	/*
+	 * Check if the BIOS has IoRestriction with explicitly set direction
+	 * and update @flags accordingly. Otherwise use whatever caller asked
+	 * for.
+	 */
+	if (update & GPIOD_FLAGS_BIT_DIR_SET) {
+		enum gpiod_flags diff = *flags ^ update;
+
+		/*
+		 * Check if caller supplied incompatible GPIO initialization
+		 * flags.
+		 *
+		 * Return %-EINVAL to notify that firmware has different
+		 * settings and we are going to use them.
+		 */
+		if (((*flags & GPIOD_FLAGS_BIT_DIR_SET) && (diff & GPIOD_FLAGS_BIT_DIR_OUT)) ||
+		    ((*flags & GPIOD_FLAGS_BIT_DIR_OUT) && (diff & GPIOD_FLAGS_BIT_DIR_VAL)))
+			ret = -EINVAL;
+		*flags = update;
+	}
+	return ret;
+}
+
 struct acpi_gpio_lookup {
 	struct acpi_gpio_info info;
 	int index;
@@ -460,8 +526,11 @@ static int acpi_populate_gpio_lookup(struct acpi_resource *ares, void *data)
 		 * - ACPI_ACTIVE_HIGH == GPIO_ACTIVE_HIGH
 		 */
 		if (lookup->info.gpioint) {
+			lookup->info.flags = GPIOD_IN;
 			lookup->info.polarity = agpio->polarity;
 			lookup->info.triggering = agpio->triggering;
+		} else {
+			lookup->info.flags = acpi_gpio_to_gpiod_flags(agpio);
 		}
 
 	}
@@ -588,18 +657,19 @@ static struct gpio_desc *acpi_get_gpiod_by_index(struct acpi_device *adev,
 struct gpio_desc *acpi_find_gpio(struct device *dev,
 				 const char *con_id,
 				 unsigned int idx,
-				 enum gpiod_flags flags,
+				 enum gpiod_flags *dflags,
 				 enum gpio_lookup_flags *lookupflags)
 {
 	struct acpi_device *adev = ACPI_COMPANION(dev);
 	struct acpi_gpio_info info;
 	struct gpio_desc *desc;
 	char propname[32];
+	int err;
 	int i;
 
 	/* Try first from _DSD */
 	for (i = 0; i < ARRAY_SIZE(gpio_suffixes); i++) {
-		if (con_id && strcmp(con_id, "gpios")) {
+		if (con_id) {
 			snprintf(propname, sizeof(propname), "%s-%s",
 				 con_id, gpio_suffixes[i]);
 		} else {
@@ -622,17 +692,21 @@ struct gpio_desc *acpi_find_gpio(struct device *dev,
 		desc = acpi_get_gpiod_by_index(adev, NULL, idx, &info);
 		if (IS_ERR(desc))
 			return desc;
+	}
 
-		if ((flags == GPIOD_OUT_LOW || flags == GPIOD_OUT_HIGH) &&
-		    info.gpioint) {
-			dev_dbg(dev, "refusing GpioInt() entry when doing GPIOD_OUT_* lookup\n");
-			return ERR_PTR(-ENOENT);
-		}
+	if (info.gpioint &&
+	    (*dflags == GPIOD_OUT_LOW || *dflags == GPIOD_OUT_HIGH)) {
+		dev_dbg(dev, "refusing GpioInt() entry when doing GPIOD_OUT_* lookup\n");
+		return ERR_PTR(-ENOENT);
 	}
 
 	if (info.polarity == GPIO_ACTIVE_LOW)
 		*lookupflags |= GPIO_ACTIVE_LOW;
 
+	err = acpi_gpio_update_gpiod_flags(dflags, info.flags);
+	if (err)
+		dev_dbg(dev, "Override GPIO initialization flags\n");
+
 	return desc;
 }
 
@@ -686,12 +760,16 @@ struct gpio_desc *acpi_node_get_gpiod(struct fwnode_handle *fwnode,
  * used to translate from the GPIO offset in the resource to the Linux IRQ
  * number.
  *
+ * The function is idempotent, though each time it runs it will configure GPIO
+ * pin direction according to the flags in GpioInt resource.
+ *
  * Return: Linux IRQ number (>%0) on success, negative errno on failure.
  */
 int acpi_dev_gpio_irq_get(struct acpi_device *adev, int index)
 {
 	int idx, i;
 	unsigned int irq_flags;
+	int ret;
 
 	for (i = 0, idx = 0; idx <= index; i++) {
 		struct acpi_gpio_info info;
@@ -704,6 +782,7 @@ int acpi_dev_gpio_irq_get(struct acpi_device *adev, int index)
 			return PTR_ERR(desc);
 
 		if (info.gpioint && idx++ == index) {
+			char label[32];
 			int irq;
 
 			if (IS_ERR(desc))
@@ -713,6 +792,11 @@ int acpi_dev_gpio_irq_get(struct acpi_device *adev, int index)
 			if (irq < 0)
 				return irq;
 
+			snprintf(label, sizeof(label), "GpioInt() %d", index);
+			ret = gpiod_configure_flags(desc, label, 0, info.flags);
+			if (ret < 0)
+				return ret;
+
 			irq_flags = acpi_dev_get_irq_type(info.triggering,
 							  info.polarity);
 
@@ -740,7 +824,6 @@ acpi_gpio_adr_space_handler(u32 function, acpi_physical_address address,
 	struct acpi_resource *ares;
 	int pin_index = (int)address;
 	acpi_status status;
-	bool pull_up;
 	int length;
 	int i;
 
@@ -755,7 +838,6 @@ acpi_gpio_adr_space_handler(u32 function, acpi_physical_address address,
 	}
 
 	agpio = &ares->data.gpio;
-	pull_up = agpio->pin_config == ACPI_PIN_CONFIG_PULLUP;
 
 	if (WARN_ON(agpio->io_restriction == ACPI_IO_RESTRICT_INPUT &&
 	    function == ACPI_WRITE)) {
@@ -806,35 +888,23 @@ acpi_gpio_adr_space_handler(u32 function, acpi_physical_address address,
 		}
 
 		if (!found) {
-			desc = gpiochip_request_own_desc(chip, pin,
-							 "ACPI:OpRegion");
+			enum gpiod_flags flags = acpi_gpio_to_gpiod_flags(agpio);
+			const char *label = "ACPI:OpRegion";
+			int err;
+
+			desc = gpiochip_request_own_desc(chip, pin, label);
 			if (IS_ERR(desc)) {
 				status = AE_ERROR;
 				mutex_unlock(&achip->conn_lock);
 				goto out;
 			}
 
-			switch (agpio->io_restriction) {
-			case ACPI_IO_RESTRICT_INPUT:
-				gpiod_direction_input(desc);
-				break;
-			case ACPI_IO_RESTRICT_OUTPUT:
-				/*
-				 * ACPI GPIO resources don't contain an
-				 * initial value for the GPIO. Therefore we
-				 * deduce that value from the pull field
-				 * instead. If the pin is pulled up we
-				 * assume default to be high, otherwise
-				 * low.
-				 */
-				gpiod_direction_output(desc, pull_up);
-				break;
-			default:
-				/*
-				 * Assume that the BIOS has configured the
-				 * direction and pull accordingly.
-				 */
-				break;
+			err = gpiod_configure_flags(desc, label, 0, flags);
+			if (err < 0) {
+				status = AE_NOT_CONFIGURED;
+				gpiochip_free_own_desc(desc);
+				mutex_unlock(&achip->conn_lock);
+				goto out;
 			}
 
 			conn = kzalloc(sizeof(*conn), GFP_KERNEL);
@@ -1089,7 +1159,7 @@ int acpi_gpio_count(struct device *dev, const char *con_id)
 
 	/* Try first from _DSD */
 	for (i = 0; i < ARRAY_SIZE(gpio_suffixes); i++) {
-		if (con_id && strcmp(con_id, "gpios"))
+		if (con_id)
 			snprintf(propname, sizeof(propname), "%s-%s",
 				 con_id, gpio_suffixes[i]);
 		else
@@ -1119,6 +1189,9 @@ int acpi_gpio_count(struct device *dev, const char *con_id)
 		struct list_head resource_list;
 		unsigned int crs_count = 0;
 
+		if (!acpi_can_fallback_to_crs(adev, con_id))
+			return count;
+
 		INIT_LIST_HEAD(&resource_list);
 		acpi_dev_get_resources(adev, &resource_list,
 				       acpi_find_gpio_count, &crs_count);
@@ -1129,45 +1202,11 @@ int acpi_gpio_count(struct device *dev, const char *con_id)
 	return count ? count : -ENOENT;
 }
 
-struct acpi_crs_lookup {
-	struct list_head node;
-	struct acpi_device *adev;
-	const char *con_id;
-};
-
-static DEFINE_MUTEX(acpi_crs_lookup_lock);
-static LIST_HEAD(acpi_crs_lookup_list);
-
 bool acpi_can_fallback_to_crs(struct acpi_device *adev, const char *con_id)
 {
-	struct acpi_crs_lookup *l, *lookup = NULL;
-
 	/* Never allow fallback if the device has properties */
 	if (adev->data.properties || adev->driver_gpios)
 		return false;
 
-	mutex_lock(&acpi_crs_lookup_lock);
-
-	list_for_each_entry(l, &acpi_crs_lookup_list, node) {
-		if (l->adev == adev) {
-			lookup = l;
-			break;
-		}
-	}
-
-	if (!lookup) {
-		lookup = kmalloc(sizeof(*lookup), GFP_KERNEL);
-		if (lookup) {
-			lookup->adev = adev;
-			lookup->con_id = kstrdup(con_id, GFP_KERNEL);
-			list_add_tail(&lookup->node, &acpi_crs_lookup_list);
-		}
-	}
-
-	mutex_unlock(&acpi_crs_lookup_lock);
-
-	return lookup &&
-		((!lookup->con_id && !con_id) ||
-		 (lookup->con_id && con_id &&
-		  strcmp(lookup->con_id, con_id) == 0));
+	return con_id == NULL;
 }