diff options
author | Jan Kotas <jank@cadence.com> | 2018-12-18 17:10:42 +0100 |
---|---|---|
committer | Linus Walleij <linus.walleij@linaro.org> | 2018-12-21 11:41:00 +0100 |
commit | 72ab2f76319e15f7ad1f9d5f529df47099d4d271 (patch) | |
tree | a5b3335d3efc798d5edf9787d7507045774c965d /drivers/gpio | |
parent | dt-bindings: gpio: Add bindings for Cadence GPIO (diff) | |
download | linux-72ab2f76319e15f7ad1f9d5f529df47099d4d271.tar.xz linux-72ab2f76319e15f7ad1f9d5f529df47099d4d271.zip |
gpio: Add Cadence GPIO driver
This patch adds a driver for Cadence GPIO controller.
It can be enabled with GPIO_CADENCE Kconfig option.
It uses generic GPIO infrastructure and works
as an interrupt controller.
At the moment it only supports level sensitive irqs.
Signed-off-by: Jan Kotas <jank@cadence.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'drivers/gpio')
-rw-r--r-- | drivers/gpio/Kconfig | 8 | ||||
-rw-r--r-- | drivers/gpio/Makefile | 1 | ||||
-rw-r--r-- | drivers/gpio/gpio-cadence.c | 291 |
3 files changed, 300 insertions, 0 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index f47994708809..7b3e4e19a799 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -160,6 +160,14 @@ config GPIO_BRCMSTB help Say yes here to enable GPIO support for Broadcom STB (BCM7XXX) SoCs. +config GPIO_CADENCE + tristate "Cadence GPIO support" + depends on OF_GPIO + select GPIO_GENERIC + select GPIOLIB_IRQCHIP + help + Say yes here to enable support for Cadence GPIO controller. + config GPIO_CLPS711X tristate "CLPS711X GPIO support" depends on ARCH_CLPS711X || COMPILE_TEST diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index f18d34590722..37628f8dbf70 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -37,6 +37,7 @@ obj-$(CONFIG_GPIO_BCM_KONA) += gpio-bcm-kona.o obj-$(CONFIG_GPIO_BD9571MWV) += gpio-bd9571mwv.o obj-$(CONFIG_GPIO_BRCMSTB) += gpio-brcmstb.o obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o +obj-$(CONFIG_GPIO_CADENCE) += gpio-cadence.o obj-$(CONFIG_GPIO_CLPS711X) += gpio-clps711x.o obj-$(CONFIG_GPIO_CS5535) += gpio-cs5535.o obj-$(CONFIG_GPIO_CRYSTAL_COVE) += gpio-crystalcove.o diff --git a/drivers/gpio/gpio-cadence.c b/drivers/gpio/gpio-cadence.c new file mode 100644 index 000000000000..aec8d5df9f30 --- /dev/null +++ b/drivers/gpio/gpio-cadence.c @@ -0,0 +1,291 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* + * Copyright 2017-2018 Cadence + * + * Authors: + * Jan Kotas <jank@cadence.com> + * Boris Brezillon <boris.brezillon@free-electrons.com> + */ + +#include <linux/gpio/driver.h> +#include <linux/clk.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> + +#define CDNS_GPIO_BYPASS_MODE 0x00 +#define CDNS_GPIO_DIRECTION_MODE 0x04 +#define CDNS_GPIO_OUTPUT_EN 0x08 +#define CDNS_GPIO_OUTPUT_VALUE 0x0c +#define CDNS_GPIO_INPUT_VALUE 0x10 +#define CDNS_GPIO_IRQ_MASK 0x14 +#define CDNS_GPIO_IRQ_EN 0x18 +#define CDNS_GPIO_IRQ_DIS 0x1c +#define CDNS_GPIO_IRQ_STATUS 0x20 +#define CDNS_GPIO_IRQ_TYPE 0x24 +#define CDNS_GPIO_IRQ_VALUE 0x28 +#define CDNS_GPIO_IRQ_ANY_EDGE 0x2c + +struct cdns_gpio_chip { + struct gpio_chip gc; + struct clk *pclk; + void __iomem *regs; + u32 bypass_orig; +}; + +static int cdns_gpio_request(struct gpio_chip *chip, unsigned int offset) +{ + struct cdns_gpio_chip *cgpio = gpiochip_get_data(chip); + unsigned long flags; + + spin_lock_irqsave(&chip->bgpio_lock, flags); + + iowrite32(ioread32(cgpio->regs + CDNS_GPIO_BYPASS_MODE) & ~BIT(offset), + cgpio->regs + CDNS_GPIO_BYPASS_MODE); + + spin_unlock_irqrestore(&chip->bgpio_lock, flags); + return 0; +} + +static void cdns_gpio_free(struct gpio_chip *chip, unsigned int offset) +{ + struct cdns_gpio_chip *cgpio = gpiochip_get_data(chip); + unsigned long flags; + + spin_lock_irqsave(&chip->bgpio_lock, flags); + + iowrite32(ioread32(cgpio->regs + CDNS_GPIO_BYPASS_MODE) | + (BIT(offset) & cgpio->bypass_orig), + cgpio->regs + CDNS_GPIO_BYPASS_MODE); + + spin_unlock_irqrestore(&chip->bgpio_lock, flags); +} + +static void cdns_gpio_irq_mask(struct irq_data *d) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(d); + struct cdns_gpio_chip *cgpio = gpiochip_get_data(chip); + + iowrite32(BIT(d->hwirq), cgpio->regs + CDNS_GPIO_IRQ_DIS); +} + +static void cdns_gpio_irq_unmask(struct irq_data *d) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(d); + struct cdns_gpio_chip *cgpio = gpiochip_get_data(chip); + + iowrite32(BIT(d->hwirq), cgpio->regs + CDNS_GPIO_IRQ_EN); +} + +static int cdns_gpio_irq_set_type(struct irq_data *d, unsigned int type) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(d); + struct cdns_gpio_chip *cgpio = gpiochip_get_data(chip); + unsigned long flags; + u32 int_value; + u32 int_type; + u32 mask = BIT(d->hwirq); + int ret = 0; + + spin_lock_irqsave(&chip->bgpio_lock, flags); + + int_value = ioread32(cgpio->regs + CDNS_GPIO_IRQ_VALUE) & ~mask; + int_type = ioread32(cgpio->regs + CDNS_GPIO_IRQ_TYPE) & ~mask; + + /* + * The GPIO controller doesn't have an ACK register. + * All interrupt statuses are cleared on a status register read. + * Don't support edge interrupts for now. + */ + + if (type == IRQ_TYPE_LEVEL_HIGH) { + int_type |= mask; + int_value |= mask; + } else if (type == IRQ_TYPE_LEVEL_LOW) { + int_type |= mask; + } else { + ret = -EINVAL; + goto err_irq_type; + } + + iowrite32(int_value, cgpio->regs + CDNS_GPIO_IRQ_VALUE); + iowrite32(int_type, cgpio->regs + CDNS_GPIO_IRQ_TYPE); + +err_irq_type: + spin_unlock_irqrestore(&chip->bgpio_lock, flags); + return ret; +} + +static void cdns_gpio_irq_handler(struct irq_desc *desc) +{ + struct gpio_chip *chip = irq_desc_get_handler_data(desc); + struct cdns_gpio_chip *cgpio = gpiochip_get_data(chip); + struct irq_chip *irqchip = irq_desc_get_chip(desc); + unsigned long status; + int hwirq; + + chained_irq_enter(irqchip, desc); + + status = ioread32(cgpio->regs + CDNS_GPIO_IRQ_STATUS) & + ~ioread32(cgpio->regs + CDNS_GPIO_IRQ_MASK); + + for_each_set_bit(hwirq, &status, chip->ngpio) + generic_handle_irq(irq_find_mapping(chip->irq.domain, hwirq)); + + chained_irq_exit(irqchip, desc); +} + +static struct irq_chip cdns_gpio_irqchip = { + .name = "cdns-gpio", + .irq_mask = cdns_gpio_irq_mask, + .irq_unmask = cdns_gpio_irq_unmask, + .irq_set_type = cdns_gpio_irq_set_type +}; + +static int cdns_gpio_probe(struct platform_device *pdev) +{ + struct cdns_gpio_chip *cgpio; + struct resource *res; + int ret, irq; + u32 dir_prev; + u32 num_gpios = 32; + + cgpio = devm_kzalloc(&pdev->dev, sizeof(*cgpio), GFP_KERNEL); + if (!cgpio) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + cgpio->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(cgpio->regs)) + return PTR_ERR(cgpio->regs); + + of_property_read_u32(pdev->dev.of_node, "ngpios", &num_gpios); + + if (num_gpios > 32) { + dev_err(&pdev->dev, "ngpios must be less or equal 32\n"); + return -EINVAL; + } + + /* + * Set all pins as inputs by default, otherwise: + * gpiochip_lock_as_irq: + * tried to flag a GPIO set as output for IRQ + * Generic GPIO driver stores the direction value internally, + * so it needs to be changed before bgpio_init() is called. + */ + dir_prev = ioread32(cgpio->regs + CDNS_GPIO_DIRECTION_MODE); + iowrite32(GENMASK(num_gpios - 1, 0), + cgpio->regs + CDNS_GPIO_DIRECTION_MODE); + + ret = bgpio_init(&cgpio->gc, &pdev->dev, 4, + cgpio->regs + CDNS_GPIO_INPUT_VALUE, + cgpio->regs + CDNS_GPIO_OUTPUT_VALUE, + NULL, + NULL, + cgpio->regs + CDNS_GPIO_DIRECTION_MODE, + BGPIOF_READ_OUTPUT_REG_SET); + if (ret) { + dev_err(&pdev->dev, "Failed to register generic gpio, %d\n", + ret); + goto err_revert_dir; + } + + cgpio->gc.label = dev_name(&pdev->dev); + cgpio->gc.ngpio = num_gpios; + cgpio->gc.parent = &pdev->dev; + cgpio->gc.base = -1; + cgpio->gc.owner = THIS_MODULE; + cgpio->gc.request = cdns_gpio_request; + cgpio->gc.free = cdns_gpio_free; + + cgpio->pclk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(cgpio->pclk)) { + ret = PTR_ERR(cgpio->pclk); + dev_err(&pdev->dev, + "Failed to retrieve peripheral clock, %d\n", ret); + goto err_revert_dir; + } + + ret = clk_prepare_enable(cgpio->pclk); + if (ret) { + dev_err(&pdev->dev, + "Failed to enable the peripheral clock, %d\n", ret); + goto err_revert_dir; + } + + ret = devm_gpiochip_add_data(&pdev->dev, &cgpio->gc, cgpio); + if (ret < 0) { + dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret); + goto err_disable_clk; + } + + /* + * irq_chip support + */ + irq = platform_get_irq(pdev, 0); + if (irq >= 0) { + ret = gpiochip_irqchip_add(&cgpio->gc, &cdns_gpio_irqchip, + 0, handle_level_irq, + IRQ_TYPE_NONE); + if (ret) { + dev_err(&pdev->dev, "Could not add irqchip, %d\n", + ret); + goto err_disable_clk; + } + gpiochip_set_chained_irqchip(&cgpio->gc, &cdns_gpio_irqchip, + irq, cdns_gpio_irq_handler); + } + + cgpio->bypass_orig = ioread32(cgpio->regs + CDNS_GPIO_BYPASS_MODE); + + /* + * Enable gpio outputs, ignored for input direction + */ + iowrite32(GENMASK(num_gpios - 1, 0), + cgpio->regs + CDNS_GPIO_OUTPUT_EN); + iowrite32(0, cgpio->regs + CDNS_GPIO_BYPASS_MODE); + + platform_set_drvdata(pdev, cgpio); + return 0; + +err_disable_clk: + clk_disable_unprepare(cgpio->pclk); + +err_revert_dir: + iowrite32(dir_prev, cgpio->regs + CDNS_GPIO_DIRECTION_MODE); + + return ret; +} + +static int cdns_gpio_remove(struct platform_device *pdev) +{ + struct cdns_gpio_chip *cgpio = platform_get_drvdata(pdev); + + iowrite32(cgpio->bypass_orig, cgpio->regs + CDNS_GPIO_BYPASS_MODE); + clk_disable_unprepare(cgpio->pclk); + + return 0; +} + +static const struct of_device_id cdns_of_ids[] = { + { .compatible = "cdns,gpio-r1p02" }, + { /* sentinel */ }, +}; + +static struct platform_driver cdns_gpio_driver = { + .driver = { + .name = "cdns-gpio", + .of_match_table = cdns_of_ids, + }, + .probe = cdns_gpio_probe, + .remove = cdns_gpio_remove, +}; +module_platform_driver(cdns_gpio_driver); + +MODULE_AUTHOR("Jan Kotas <jank@cadence.com>"); +MODULE_DESCRIPTION("Cadence GPIO driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:cdns-gpio"); |