summaryrefslogtreecommitdiffstats
path: root/drivers/gpio
diff options
context:
space:
mode:
authorGregory Fong <gregory.0xf0@gmail.com>2015-08-01 03:17:43 +0200
committerLinus Walleij <linus.walleij@linaro.org>2015-08-13 13:13:26 +0200
commit19a7b6940b781256ea8821e803d1e5f2933224b1 (patch)
tree95f1f9cf88a9828aeebf4f34ce5220ba88c1b8de /drivers/gpio
parentgpio/ABI: document what is already the case (diff)
downloadlinux-19a7b6940b781256ea8821e803d1e5f2933224b1.tar.xz
linux-19a7b6940b781256ea8821e803d1e5f2933224b1.zip
gpio: brcmstb: Add interrupt and wakeup source support
Uses the gpiolib irqchip helpers. For this to work, the irq setup function is called once per bank instead of once per device. Note that all known uses of this block have a BCM7120 L2 interrupt controller as a parent. Supports interrupts for all GPIOs. In the IRQ handler, we check for raised IRQs for invalid GPIOs and warn (ratelimited) if they're encountered. Also, several drivers (e.g. gpio-keys) allow for GPIOs to be configured as wakeup sources, and this GPIO controller supports that through a separate interrupt path. The de-facto standard DT property "wakeup-source" is checked, since that indicates whether the GPIO controller hardware can wake. Uses the IRQCHIP_MASK_ON_SUSPEND irq_chip flag because UPG GIO doesn't have any of its own wakeup source configuration. Aside regarding gpiolib irqchip helpers: It wasn't obvious (to me) that you can have multiple chained irqchips and associated IRQ domains for a single parent IRQ, and as long as the xlate function is written correctly, a GPIO IRQ request end up checking the correct domain and will get associated with the correct IRQ. What helps make this clear is to read drivers/gpio/gpiolib-of.c: - of_gpiochip_find_and_xlate() - of_get_named_gpiod_flags() drivers/gpio/gpiolib.c: - gpiochip_find() Signed-off-by: Gregory Fong <gregory.0xf0@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'drivers/gpio')
-rw-r--r--drivers/gpio/Kconfig1
-rw-r--r--drivers/gpio/gpio-brcmstb.c262
2 files changed, 257 insertions, 6 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 37d9418c5a2d..b4fc9e4d24c6 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -130,6 +130,7 @@ config GPIO_BRCMSTB
default y if ARCH_BRCMSTB
depends on OF_GPIO && (ARCH_BRCMSTB || COMPILE_TEST)
select GPIO_GENERIC
+ select GPIOLIB_IRQCHIP
help
Say yes here to enable GPIO support for Broadcom STB (BCM7XXX) SoCs.
diff --git a/drivers/gpio/gpio-brcmstb.c b/drivers/gpio/gpio-brcmstb.c
index 7a3cb1fa0a76..16b66d51f109 100644
--- a/drivers/gpio/gpio-brcmstb.c
+++ b/drivers/gpio/gpio-brcmstb.c
@@ -17,6 +17,9 @@
#include <linux/of_irq.h>
#include <linux/module.h>
#include <linux/basic_mmio_gpio.h>
+#include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/interrupt.h>
#define GIO_BANK_SIZE 0x20
#define GIO_ODEN(bank) (((bank) * GIO_BANK_SIZE) + 0x00)
@@ -34,14 +37,17 @@ struct brcmstb_gpio_bank {
struct bgpio_chip bgc;
struct brcmstb_gpio_priv *parent_priv;
u32 width;
+ struct irq_chip irq_chip;
};
struct brcmstb_gpio_priv {
struct list_head bank_list;
void __iomem *reg_base;
- int num_banks;
struct platform_device *pdev;
+ int parent_irq;
int gpio_base;
+ bool can_wake;
+ int parent_wake_irq;
};
#define MAX_GPIO_PER_BANK 32
@@ -63,6 +69,183 @@ brcmstb_gpio_gc_to_priv(struct gpio_chip *gc)
return bank->parent_priv;
}
+static void brcmstb_gpio_set_imask(struct brcmstb_gpio_bank *bank,
+ unsigned int offset, bool enable)
+{
+ struct bgpio_chip *bgc = &bank->bgc;
+ struct brcmstb_gpio_priv *priv = bank->parent_priv;
+ u32 mask = bgc->pin2mask(bgc, offset);
+ u32 imask;
+ unsigned long flags;
+
+ spin_lock_irqsave(&bgc->lock, flags);
+ imask = bgc->read_reg(priv->reg_base + GIO_MASK(bank->id));
+ if (enable)
+ imask |= mask;
+ else
+ imask &= ~mask;
+ bgc->write_reg(priv->reg_base + GIO_MASK(bank->id), imask);
+ spin_unlock_irqrestore(&bgc->lock, flags);
+}
+
+/* -------------------- IRQ chip functions -------------------- */
+
+static void brcmstb_gpio_irq_mask(struct irq_data *d)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+ struct brcmstb_gpio_bank *bank = brcmstb_gpio_gc_to_bank(gc);
+
+ brcmstb_gpio_set_imask(bank, d->hwirq, false);
+}
+
+static void brcmstb_gpio_irq_unmask(struct irq_data *d)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+ struct brcmstb_gpio_bank *bank = brcmstb_gpio_gc_to_bank(gc);
+
+ brcmstb_gpio_set_imask(bank, d->hwirq, true);
+}
+
+static int brcmstb_gpio_irq_set_type(struct irq_data *d, unsigned int type)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+ struct brcmstb_gpio_bank *bank = brcmstb_gpio_gc_to_bank(gc);
+ struct brcmstb_gpio_priv *priv = bank->parent_priv;
+ u32 mask = BIT(d->hwirq);
+ u32 edge_insensitive, iedge_insensitive;
+ u32 edge_config, iedge_config;
+ u32 level, ilevel;
+ unsigned long flags;
+
+ switch (type) {
+ case IRQ_TYPE_LEVEL_LOW:
+ level = 0;
+ edge_config = 0;
+ edge_insensitive = 0;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ level = mask;
+ edge_config = 0;
+ edge_insensitive = 0;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ level = 0;
+ edge_config = 0;
+ edge_insensitive = 0;
+ break;
+ case IRQ_TYPE_EDGE_RISING:
+ level = 0;
+ edge_config = mask;
+ edge_insensitive = 0;
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ level = 0;
+ edge_config = 0; /* don't care, but want known value */
+ edge_insensitive = mask;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&bank->bgc.lock, flags);
+
+ iedge_config = bank->bgc.read_reg(priv->reg_base +
+ GIO_EC(bank->id)) & ~mask;
+ iedge_insensitive = bank->bgc.read_reg(priv->reg_base +
+ GIO_EI(bank->id)) & ~mask;
+ ilevel = bank->bgc.read_reg(priv->reg_base +
+ GIO_LEVEL(bank->id)) & ~mask;
+
+ bank->bgc.write_reg(priv->reg_base + GIO_EC(bank->id),
+ iedge_config | edge_config);
+ bank->bgc.write_reg(priv->reg_base + GIO_EI(bank->id),
+ iedge_insensitive | edge_insensitive);
+ bank->bgc.write_reg(priv->reg_base + GIO_LEVEL(bank->id),
+ ilevel | level);
+
+ spin_unlock_irqrestore(&bank->bgc.lock, flags);
+ return 0;
+}
+
+static int brcmstb_gpio_irq_set_wake(struct irq_data *d, unsigned int enable)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+ struct brcmstb_gpio_priv *priv = brcmstb_gpio_gc_to_priv(gc);
+ int ret = 0;
+
+ /*
+ * Only enable wake IRQ once for however many hwirqs can wake
+ * since they all use the same wake IRQ. Mask will be set
+ * up appropriately thanks to IRQCHIP_MASK_ON_SUSPEND flag.
+ */
+ if (enable)
+ ret = enable_irq_wake(priv->parent_wake_irq);
+ else
+ ret = disable_irq_wake(priv->parent_wake_irq);
+ if (ret)
+ dev_err(&priv->pdev->dev, "failed to %s wake-up interrupt\n",
+ enable ? "enable" : "disable");
+ return ret;
+}
+
+static irqreturn_t brcmstb_gpio_wake_irq_handler(int irq, void *data)
+{
+ struct brcmstb_gpio_priv *priv = data;
+
+ if (!priv || irq != priv->parent_wake_irq)
+ return IRQ_NONE;
+ pm_wakeup_event(&priv->pdev->dev, 0);
+ return IRQ_HANDLED;
+}
+
+static void brcmstb_gpio_irq_bank_handler(struct brcmstb_gpio_bank *bank)
+{
+ struct brcmstb_gpio_priv *priv = bank->parent_priv;
+ struct irq_domain *irq_domain = bank->bgc.gc.irqdomain;
+ void __iomem *reg_base = priv->reg_base;
+ unsigned long status;
+ unsigned long flags;
+
+ spin_lock_irqsave(&bank->bgc.lock, flags);
+ while ((status = bank->bgc.read_reg(reg_base + GIO_STAT(bank->id)) &
+ bank->bgc.read_reg(reg_base + GIO_MASK(bank->id)))) {
+ int bit;
+
+ for_each_set_bit(bit, &status, 32) {
+ u32 stat = bank->bgc.read_reg(reg_base +
+ GIO_STAT(bank->id));
+ if (bit >= bank->width)
+ dev_warn(&priv->pdev->dev,
+ "IRQ for invalid GPIO (bank=%d, offset=%d)\n",
+ bank->id, bit);
+ bank->bgc.write_reg(reg_base + GIO_STAT(bank->id),
+ stat | BIT(bit));
+ generic_handle_irq(irq_find_mapping(irq_domain, bit));
+ }
+ }
+ spin_unlock_irqrestore(&bank->bgc.lock, flags);
+}
+
+/* Each UPG GIO block has one IRQ for all banks */
+static void brcmstb_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ struct gpio_chip *gc = irq_desc_get_handler_data(desc);
+ struct brcmstb_gpio_priv *priv = brcmstb_gpio_gc_to_priv(gc);
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ struct list_head *pos;
+
+ /* Interrupts weren't properly cleared during probe */
+ BUG_ON(!priv || !chip);
+
+ chained_irq_enter(chip, desc);
+ list_for_each(pos, &priv->bank_list) {
+ struct brcmstb_gpio_bank *bank =
+ list_entry(pos, struct brcmstb_gpio_bank, node);
+ brcmstb_gpio_irq_bank_handler(bank);
+ }
+ chained_irq_exit(chip, desc);
+}
+
/* Make sure that the number of banks matches up between properties */
static int brcmstb_gpio_sanity_check_banks(struct device *dev,
struct device_node *np, struct resource *res)
@@ -91,7 +274,7 @@ static int brcmstb_gpio_remove(struct platform_device *pdev)
bank = list_entry(pos, struct brcmstb_gpio_bank, node);
ret = bgpio_remove(&bank->bgc);
if (ret)
- dev_err(&pdev->dev, "gpiochip_remove fail in cleanup");
+ dev_err(&pdev->dev, "gpiochip_remove fail in cleanup\n");
}
return ret;
}
@@ -112,7 +295,7 @@ static int brcmstb_gpio_of_xlate(struct gpio_chip *gc,
return -EINVAL;
offset = gpiospec->args[0] - (gc->base - priv->gpio_base);
- if (offset >= gc->ngpio)
+ if (offset >= gc->ngpio || offset < 0)
return -EINVAL;
if (unlikely(offset >= bank->width)) {
@@ -127,6 +310,55 @@ static int brcmstb_gpio_of_xlate(struct gpio_chip *gc,
return offset;
}
+/* Before calling, must have bank->parent_irq set and gpiochip registered */
+static int brcmstb_gpio_irq_setup(struct platform_device *pdev,
+ struct brcmstb_gpio_bank *bank)
+{
+ struct brcmstb_gpio_priv *priv = bank->parent_priv;
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+
+ bank->irq_chip.name = dev_name(dev);
+ bank->irq_chip.irq_mask = brcmstb_gpio_irq_mask;
+ bank->irq_chip.irq_unmask = brcmstb_gpio_irq_unmask;
+ bank->irq_chip.irq_set_type = brcmstb_gpio_irq_set_type;
+
+ /* Ensures that all non-wakeup IRQs are disabled at suspend */
+ bank->irq_chip.flags = IRQCHIP_MASK_ON_SUSPEND;
+
+ if (IS_ENABLED(CONFIG_PM_SLEEP) && !priv->can_wake &&
+ of_property_read_bool(np, "wakeup-source")) {
+ priv->parent_wake_irq = platform_get_irq(pdev, 1);
+ if (priv->parent_wake_irq < 0) {
+ dev_warn(dev,
+ "Couldn't get wake IRQ - GPIOs will not be able to wake from sleep");
+ } else {
+ int err = devm_request_irq(dev, priv->parent_wake_irq,
+ brcmstb_gpio_wake_irq_handler, 0,
+ "brcmstb-gpio-wake", priv);
+
+ if (err < 0) {
+ dev_err(dev, "Couldn't request wake IRQ");
+ return err;
+ }
+
+ device_set_wakeup_capable(dev, true);
+ device_wakeup_enable(dev);
+ priv->can_wake = true;
+ }
+ }
+
+ if (priv->can_wake)
+ bank->irq_chip.irq_set_wake = brcmstb_gpio_irq_set_wake;
+
+ gpiochip_irqchip_add(&bank->bgc.gc, &bank->irq_chip, 0,
+ handle_simple_irq, IRQ_TYPE_NONE);
+ gpiochip_set_chained_irqchip(&bank->bgc.gc, &bank->irq_chip,
+ priv->parent_irq, brcmstb_gpio_irq_handler);
+
+ return 0;
+}
+
static int brcmstb_gpio_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -137,6 +369,7 @@ static int brcmstb_gpio_probe(struct platform_device *pdev)
struct property *prop;
const __be32 *p;
u32 bank_width;
+ int num_banks = 0;
int err;
static int gpio_base;
@@ -153,6 +386,16 @@ static int brcmstb_gpio_probe(struct platform_device *pdev)
priv->reg_base = reg_base;
priv->pdev = pdev;
+ if (of_property_read_bool(np, "interrupt-controller")) {
+ priv->parent_irq = platform_get_irq(pdev, 0);
+ if (priv->parent_irq <= 0) {
+ dev_err(dev, "Couldn't get IRQ");
+ return -ENOENT;
+ }
+ } else {
+ priv->parent_irq = -ENOENT;
+ }
+
INIT_LIST_HEAD(&priv->bank_list);
if (brcmstb_gpio_sanity_check_banks(dev, np, res))
return -EINVAL;
@@ -170,7 +413,7 @@ static int brcmstb_gpio_probe(struct platform_device *pdev)
}
bank->parent_priv = priv;
- bank->id = priv->num_banks;
+ bank->id = num_banks;
if (bank_width <= 0 || bank_width > MAX_GPIO_PER_BANK) {
dev_err(dev, "Invalid bank width %d\n", bank_width);
goto fail;
@@ -209,17 +452,24 @@ static int brcmstb_gpio_probe(struct platform_device *pdev)
goto fail;
}
gpio_base += gc->ngpio;
+
+ if (priv->parent_irq > 0) {
+ err = brcmstb_gpio_irq_setup(pdev, bank);
+ if (err)
+ goto fail;
+ }
+
dev_dbg(dev, "bank=%d, base=%d, ngpio=%d, width=%d\n", bank->id,
gc->base, gc->ngpio, bank->width);
/* Everything looks good, so add bank to list */
list_add(&bank->node, &priv->bank_list);
- priv->num_banks++;
+ num_banks++;
}
dev_info(dev, "Registered %d banks (GPIO(s): %d-%d)\n",
- priv->num_banks, priv->gpio_base, gpio_base - 1);
+ num_banks, priv->gpio_base, gpio_base - 1);
platform_set_drvdata(pdev, priv);