drm/bridge: chrontel-ch7033: Add a new driver

This is a driver for video encoder with VGA and DVI/HDMI outputs.

There is no documentation for the chip -- the operation was guessed from
what was sniffed on a Dell Wyse 3020 ThinOS terminal, the register names
come from the ch7035 driver in Mediatek's GPL code dump.

Only bare minimum is implemented -- no fancy stuff, such as scaling. That
would only worsen our misery. We don't load the firmware and we don't need
to even bother enabling the MCU.  There are probably no distributable
firmware images anyway.

Tested with a handful of monitors ranging from 1024x768@75 to 1400x1050@60,
with VGA as well as DVI.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200424213539.93157-4-lkundrak@v3.sk

1 files changed, 10 insertions, 0 deletions

diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index 6ec945f837b8..04f876e985de 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -27,6 +27,16 @@ config DRM_CDNS_DSI
 	  Support Cadence DPI to DSI bridge. This is an internal
 	  bridge and is meant to be directly embedded in a SoC.
 
+config DRM_CHRONTEL_CH7033
+	tristate "Chrontel CH7033 Video Encoder"
+	depends on OF
+	select DRM_KMS_HELPER
+	help
+	  Enable support for the Chrontel CH7033 VGA/DVI/HDMI Encoder, as
+	  found in the Dell Wyse 3020 thin client.
+
+	  If in doubt, say "N".
+
 config DRM_DISPLAY_CONNECTOR
 	tristate "Display connector support"
 	depends on OF