Merge tag 'drm-intel-next-2014-09-05' of git://anongit.freedesktop.org/drm-intel into drm-next

- final bits (again) for the rotation support (Sonika Jindal)
- support bl_power in the intel backlight (Jani)
- vdd handling improvements from Ville
- i830M fixes from Ville
- piles of prep work all over to make skl enabling just plug in (Damien, Sonika)
- rename DP training defines to reflect latest edp standards, this touches all
  drm drivers supporting DP (Sonika Jindal)
- cache edids during single detect cycle to avoid re-reading it for e.g. audio,
  from Chris
- move w/a for registers which are stored in the hw context to the context init
  code (Arun&Damien)
- edp panel power sequencer fixes, helps chv a lot (Ville)
- piles of other chv fixes all over
- much more paranoid pageflip handling with stall detection and better recovery
  from Chris
- small things all over, as usual

* tag 'drm-intel-next-2014-09-05' of git://anongit.freedesktop.org/drm-intel: (114 commits)
  drm/i915: Update DRIVER_DATE to 20140905
  drm/i915: Decouple the stuck pageflip on modeset
  drm/i915: Check for a stalled page flip after each vblank
  drm/i915: Introduce a for_each_plane() macro
  drm/i915: Rewrite ABS_DIFF() in a safer manner
  drm/i915: Add comments explaining the vdd on/off functions
  drm/i915: Move DP port disable to post_disable for pch platforms
  drm/i915: Enable DP port earlier
  drm/i915: Turn on panel power before doing aux transfers
  drm/i915: Be more careful when picking the initial power sequencer pipe
  drm/i915: Reset power sequencer pipe tracking when disp2d is off
  drm/i915: Track which port is using which pipe's power sequencer
  drm/i915: Fix edp vdd locking
  drm/i915: Reset the HEAD pointer for the ring after writing START
  drm/i915: Fix unsafe vma iteration in i915_drop_caches
  drm/i915: init sprites with univeral plane init function
  drm/i915: Check of !HAS_PCH_SPLIT() in PCH transcoder funcs
  drm/i915: Use HAS_GMCH_DISPLAY un underrun reporting code
  drm/i915: Use IS_BROADWELL() instead of IS_GEN8() in forcewake code
  drm/i915: Don't call gen8_fbc_sw_flush() on chv
  ...

2 files changed, 10 insertions, 10 deletions

diff --git a/drivers/gpu/drm/gma500/cdv_intel_dp.c b/drivers/gpu/drm/gma500/cdv_intel_dp.c
index a4cc0e60a1be..9f158eab517a 100644
--- a/drivers/gpu/drm/gma500/cdv_intel_dp.c
+++ b/drivers/gpu/drm/gma500/cdv_intel_dp.c
@@ -1089,7 +1089,7 @@ static char	*link_train_names[] = {
 };
 #endif
 
-#define CDV_DP_VOLTAGE_MAX	    DP_TRAIN_VOLTAGE_SWING_1200
+#define CDV_DP_VOLTAGE_MAX	    DP_TRAIN_VOLTAGE_SWING_LEVEL_3
 /*
 static uint8_t
 cdv_intel_dp_pre_emphasis_max(uint8_t voltage_swing)
@@ -1276,7 +1276,7 @@ cdv_intel_dp_set_vswing_premph(struct gma_encoder *encoder, uint8_t signal_level
 		cdv_sb_write(dev, ddi_reg->VSwing2, dp_vswing_premph_table[index]);
 
 	/* ;gfx_dpio_set_reg(0x814c, 0x40802040) */
-	if ((vswing + premph) == DP_TRAIN_VOLTAGE_SWING_1200)
+	if ((vswing + premph) == DP_TRAIN_VOLTAGE_SWING_LEVEL_3)
 		cdv_sb_write(dev, ddi_reg->VSwing3, 0x70802040);
 	else
 		cdv_sb_write(dev, ddi_reg->VSwing3, 0x40802040);
diff --git a/drivers/gpu/drm/gma500/intel_bios.c b/drivers/gpu/drm/gma500/intel_bios.c
index d3497348c4d5..63bde4e86c6a 100644
--- a/drivers/gpu/drm/gma500/intel_bios.c
+++ b/drivers/gpu/drm/gma500/intel_bios.c
@@ -116,30 +116,30 @@ parse_edp(struct drm_psb_private *dev_priv, struct bdb_header *bdb)
 
 	switch (edp_link_params->preemphasis) {
 	case 0:
-		dev_priv->edp.preemphasis = DP_TRAIN_PRE_EMPHASIS_0;
+		dev_priv->edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_0;
 		break;
 	case 1:
-		dev_priv->edp.preemphasis = DP_TRAIN_PRE_EMPHASIS_3_5;
+		dev_priv->edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_1;
 		break;
 	case 2:
-		dev_priv->edp.preemphasis = DP_TRAIN_PRE_EMPHASIS_6;
+		dev_priv->edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_2;
 		break;
 	case 3:
-		dev_priv->edp.preemphasis = DP_TRAIN_PRE_EMPHASIS_9_5;
+		dev_priv->edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_3;
 		break;
 	}
 	switch (edp_link_params->vswing) {
 	case 0:
-		dev_priv->edp.vswing = DP_TRAIN_VOLTAGE_SWING_400;
+		dev_priv->edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_0;
 		break;
 	case 1:
-		dev_priv->edp.vswing = DP_TRAIN_VOLTAGE_SWING_600;
+		dev_priv->edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_1;
 		break;
 	case 2:
-		dev_priv->edp.vswing = DP_TRAIN_VOLTAGE_SWING_800;
+		dev_priv->edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_2;
 		break;
 	case 3:
-		dev_priv->edp.vswing = DP_TRAIN_VOLTAGE_SWING_1200;
+		dev_priv->edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_3;
 		break;
 	}
 	DRM_DEBUG_KMS("VBT reports EDP: VSwing  %d, Preemph %d\n",