diff options
| author | Jani Nikula <jani.nikula@intel.com> | 2012-08-13 16:33:02 +0200 |
|---|---|---|
| committer | Daniel Vetter <daniel.vetter@ffwll.ch> | 2012-08-13 19:04:24 +0200 |
| commit | cee25168e9c4ef7f9417632af2dc78b8521dfda7 (patch) | |
| tree | b69d9a810c22c2287d39fbfdabbe927dd27add9c /drivers/gpu/drm/i915/intel_i2c.c | |
| parent | drm/i915: ignore eDP bpc settings from vbt (diff) | |
| download | linux-cee25168e9c4ef7f9417632af2dc78b8521dfda7.tar.xz linux-cee25168e9c4ef7f9417632af2dc78b8521dfda7.zip | |
drm/i915: ensure i2c adapter is all set before adding it
i2c_add_adapter() may do i2c transfers on the bus to detect supported
devices. Therefore the adapter needs to be all set before adding it. This
was not the case for the bit-banging fallback, resulting in an oops if the
device detection GMBUS transfers timed out. Fix the issue by calling
i2c_add_adapter() only after intel_gpio_setup().
LKML-Reference: <5021F00B.7000503@ionic.de>
Tested-by: Mihai Moldovan <ionic@ionic.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Diffstat (limited to '')
| -rw-r--r-- | drivers/gpu/drm/i915/intel_i2c.c | 7 |
1 files changed, 4 insertions, 3 deletions
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c index d79500bc1ce5..b9755f6378d8 100644 --- a/drivers/gpu/drm/i915/intel_i2c.c +++ b/drivers/gpu/drm/i915/intel_i2c.c @@ -486,9 +486,6 @@ int intel_setup_gmbus(struct drm_device *dev) bus->dev_priv = dev_priv; bus->adapter.algo = &gmbus_algorithm; - ret = i2c_add_adapter(&bus->adapter); - if (ret) - goto err; /* By default use a conservative clock rate */ bus->reg0 = port | GMBUS_RATE_100KHZ; @@ -498,6 +495,10 @@ int intel_setup_gmbus(struct drm_device *dev) bus->force_bit = true; intel_gpio_setup(bus, port); + + ret = i2c_add_adapter(&bus->adapter); + if (ret) + goto err; } intel_i2c_reset(dev_priv->dev); |