Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux

Pull drm tree changes from Dave Airlie:
 "This is the main drm pull request, I have some overlap with sound and
  arm-soc, the sound patch is acked and may conflict based on -next
  reports but should be a trivial fixup, which I'll leave to you!

  Highlights:

   - new drivers:

     MSM driver from Rob Clark

   - non-drm:

     switcheroo and hdmi audio driver support for secondary GPU
     poweroff, so drivers can use runtime PM to poweroff the GPUs.  This
     can save 5 or 6W on some optimus laptops.

   - drm core:

     combined GEM and TTM VMA manager
     per-filp mmap permission tracking
     initial rendernode support (via a runtime enable for now, until we get api stable),
     remove old proc support,
     lots of cleanups of legacy code
     hdmi vendor infoframes and 4k modes
     lots of gem/prime locking and races fixes
     async pageflip scaffolding
     drm bridge objects

   - i915:

     Haswell PC8+ support and eLLC support, HDMI 4K support, initial
     per-process VMA pieces, watermark reworks, convert to generic hdmi
     infoframes, encoder reworking, fastboot support,

   - radeon:

     CIK PM support, remove 3d blit code in favour of DMA engines,
     Berlin GPU support, HDMI audio fixes

   - nouveau:

     secondary GPU power down support for optimus laptops, lots of
     fixes, use MSI, VP3 engine support

   - exynos:

     runtime pm support for g2d, DT support, remove non-DT,

   - tda998x i2c driver:

     lots of fixes for sync issues

   - gma500:

     lots of cleanups

   - rcar:

     add LVDS support, fbdev emulation,

   - tegra:

     just minor fixes"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (684 commits)
  drm/exynos: Fix build error with exynos_drm_connector.c
  drm/exynos: Remove non-DT support in exynos_drm_fimd
  drm/exynos: Remove non-DT support in exynos_hdmi
  drm/exynos: Remove non-DT support in exynos_drm_g2d
  drm/exynos: Remove non-DT support in exynos_hdmiphy
  drm/exynos: Remove non-DT support in exynos_ddc
  drm/exynos: Make Exynos DRM drivers depend on OF
  drm/exynos: Consider fallback option to allocation fail
  drm/exynos: fimd: move platform data parsing to separate function
  drm/exynos: fimd: get signal polarities from device tree
  drm/exynos: fimd: replace struct fb_videomode with videomode
  drm/exynos: check a pixel format to a particular window layer
  drm/exynos: fix fimd pixel format setting
  drm/exynos: Add NULL pointer check
  drm/exynos: Remove redundant error messages
  drm/exynos: Add missing of.h header include
  drm/exynos: Remove redundant NULL check in exynos_drm_buf
  drm/exynos: add device tree support for rotator
  drm/exynos: Add missing includes
  drm/exynos: add runtime pm interfaces to g2d driver
  ...

1 files changed, 22 insertions, 18 deletions

diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 61348eae2f04..4d33278e31fb 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -122,17 +122,25 @@ static void intel_lvds_get_config(struct intel_encoder *encoder,
  * This is an exception to the general rule that mode_set doesn't turn
  * things on.
  */
-static void intel_pre_pll_enable_lvds(struct intel_encoder *encoder)
+static void intel_pre_enable_lvds(struct intel_encoder *encoder)
 {
 	struct intel_lvds_encoder *lvds_encoder = to_lvds_encoder(&encoder->base);
 	struct drm_device *dev = encoder->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
+	struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
 	struct drm_display_mode *fixed_mode =
 		lvds_encoder->attached_connector->base.panel.fixed_mode;
-	int pipe = intel_crtc->pipe;
+	int pipe = crtc->pipe;
 	u32 temp;
 
+	if (HAS_PCH_SPLIT(dev)) {
+		assert_fdi_rx_pll_disabled(dev_priv, pipe);
+		assert_shared_dpll_disabled(dev_priv,
+					    intel_crtc_to_shared_dpll(crtc));
+	} else {
+		assert_pll_disabled(dev_priv, pipe);
+	}
+
 	temp = I915_READ(lvds_encoder->reg);
 	temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
 
@@ -149,7 +157,7 @@ static void intel_pre_pll_enable_lvds(struct intel_encoder *encoder)
 
 	/* set the corresponsding LVDS_BORDER bit */
 	temp &= ~LVDS_BORDER_ENABLE;
-	temp |= intel_crtc->config.gmch_pfit.lvds_border_bits;
+	temp |= crtc->config.gmch_pfit.lvds_border_bits;
 	/* Set the B0-B3 data pairs corresponding to whether we're going to
 	 * set the DPLLs for dual-channel mode or not.
 	 */
@@ -169,8 +177,7 @@ static void intel_pre_pll_enable_lvds(struct intel_encoder *encoder)
 	if (INTEL_INFO(dev)->gen == 4) {
 		/* Bspec wording suggests that LVDS port dithering only exists
 		 * for 18bpp panels. */
-		if (intel_crtc->config.dither &&
-		    intel_crtc->config.pipe_bpp == 18)
+		if (crtc->config.dither && crtc->config.pipe_bpp == 18)
 			temp |= LVDS_ENABLE_DITHER;
 		else
 			temp &= ~LVDS_ENABLE_DITHER;
@@ -312,14 +319,12 @@ static bool intel_lvds_compute_config(struct intel_encoder *intel_encoder,
 	return true;
 }
 
-static void intel_lvds_mode_set(struct drm_encoder *encoder,
-				struct drm_display_mode *mode,
-				struct drm_display_mode *adjusted_mode)
+static void intel_lvds_mode_set(struct intel_encoder *encoder)
 {
 	/*
-	 * The LVDS pin pair will already have been turned on in the
-	 * intel_crtc_mode_set since it has a large impact on the DPLL
-	 * settings.
+	 * We don't do anything here, the LVDS port is fully set up in the pre
+	 * enable hook - the ordering constraints for enabling the lvds port vs.
+	 * enabling the display pll are too strict.
 	 */
 }
 
@@ -336,6 +341,9 @@ intel_lvds_detect(struct drm_connector *connector, bool force)
 	struct drm_device *dev = connector->dev;
 	enum drm_connector_status status;
 
+	DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
+		      connector->base.id, drm_get_connector_name(connector));
+
 	status = intel_panel_detect(dev);
 	if (status != connector_status_unknown)
 		return status;
@@ -497,10 +505,6 @@ static int intel_lvds_set_property(struct drm_connector *connector,
 	return 0;
 }
 
-static const struct drm_encoder_helper_funcs intel_lvds_helper_funcs = {
-	.mode_set = intel_lvds_mode_set,
-};
-
 static const struct drm_connector_helper_funcs intel_lvds_connector_helper_funcs = {
 	.get_modes = intel_lvds_get_modes,
 	.mode_valid = intel_lvds_mode_valid,
@@ -959,8 +963,9 @@ void intel_lvds_init(struct drm_device *dev)
 			 DRM_MODE_ENCODER_LVDS);
 
 	intel_encoder->enable = intel_enable_lvds;
-	intel_encoder->pre_pll_enable = intel_pre_pll_enable_lvds;
+	intel_encoder->pre_enable = intel_pre_enable_lvds;
 	intel_encoder->compute_config = intel_lvds_compute_config;
+	intel_encoder->mode_set = intel_lvds_mode_set;
 	intel_encoder->disable = intel_disable_lvds;
 	intel_encoder->get_hw_state = intel_lvds_get_hw_state;
 	intel_encoder->get_config = intel_lvds_get_config;
@@ -977,7 +982,6 @@ void intel_lvds_init(struct drm_device *dev)
 	else
 		intel_encoder->crtc_mask = (1 << 1);
 
-	drm_encoder_helper_add(encoder, &intel_lvds_helper_funcs);
 	drm_connector_helper_add(connector, &intel_lvds_connector_helper_funcs);
 	connector->display_info.subpixel_order = SubPixelHorizontalRGB;
 	connector->interlace_allowed = false;