Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:

	arch/x86/kernel/io_apic.c

1 files changed, 525 insertions, 0 deletions

diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
new file mode 100644
index 000000000000..ccecfaf6307b
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -0,0 +1,525 @@
+/*
+ * Copyright © 2006-2007 Intel Corporation
+ * Copyright (c) 2006 Dave Airlie <airlied@linux.ie>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *	Eric Anholt <eric@anholt.net>
+ *      Dave Airlie <airlied@linux.ie>
+ *      Jesse Barnes <jesse.barnes@intel.com>
+ */
+
+#include <linux/i2c.h>
+#include "drmP.h"
+#include "drm.h"
+#include "drm_crtc.h"
+#include "drm_edid.h"
+#include "intel_drv.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+
+/**
+ * Sets the backlight level.
+ *
+ * \param level backlight level, from 0 to intel_lvds_get_max_backlight().
+ */
+static void intel_lvds_set_backlight(struct drm_device *dev, int level)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 blc_pwm_ctl;
+
+	blc_pwm_ctl = I915_READ(BLC_PWM_CTL) & ~BACKLIGHT_DUTY_CYCLE_MASK;
+	I915_WRITE(BLC_PWM_CTL, (blc_pwm_ctl |
+				 (level << BACKLIGHT_DUTY_CYCLE_SHIFT)));
+}
+
+/**
+ * Returns the maximum level of the backlight duty cycle field.
+ */
+static u32 intel_lvds_get_max_backlight(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	return ((I915_READ(BLC_PWM_CTL) & BACKLIGHT_MODULATION_FREQ_MASK) >>
+		BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;
+}
+
+/**
+ * Sets the power state for the panel.
+ */
+static void intel_lvds_set_power(struct drm_device *dev, bool on)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 pp_status;
+
+	if (on) {
+		I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) |
+			   POWER_TARGET_ON);
+		do {
+			pp_status = I915_READ(PP_STATUS);
+		} while ((pp_status & PP_ON) == 0);
+
+		intel_lvds_set_backlight(dev, dev_priv->backlight_duty_cycle);
+	} else {
+		intel_lvds_set_backlight(dev, 0);
+
+		I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) &
+			   ~POWER_TARGET_ON);
+		do {
+			pp_status = I915_READ(PP_STATUS);
+		} while (pp_status & PP_ON);
+	}
+}
+
+static void intel_lvds_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct drm_device *dev = encoder->dev;
+
+	if (mode == DRM_MODE_DPMS_ON)
+		intel_lvds_set_power(dev, true);
+	else
+		intel_lvds_set_power(dev, false);
+
+	/* XXX: We never power down the LVDS pairs. */
+}
+
+static void intel_lvds_save(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	dev_priv->savePP_ON = I915_READ(PP_ON_DELAYS);
+	dev_priv->savePP_OFF = I915_READ(PP_OFF_DELAYS);
+	dev_priv->savePP_CONTROL = I915_READ(PP_CONTROL);
+	dev_priv->savePP_DIVISOR = I915_READ(PP_DIVISOR);
+	dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL);
+	dev_priv->backlight_duty_cycle = (dev_priv->saveBLC_PWM_CTL &
+				       BACKLIGHT_DUTY_CYCLE_MASK);
+
+	/*
+	 * If the light is off at server startup, just make it full brightness
+	 */
+	if (dev_priv->backlight_duty_cycle == 0)
+		dev_priv->backlight_duty_cycle =
+			intel_lvds_get_max_backlight(dev);
+}
+
+static void intel_lvds_restore(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	I915_WRITE(BLC_PWM_CTL, dev_priv->saveBLC_PWM_CTL);
+	I915_WRITE(PP_ON_DELAYS, dev_priv->savePP_ON);
+	I915_WRITE(PP_OFF_DELAYS, dev_priv->savePP_OFF);
+	I915_WRITE(PP_DIVISOR, dev_priv->savePP_DIVISOR);
+	I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL);
+	if (dev_priv->savePP_CONTROL & POWER_TARGET_ON)
+		intel_lvds_set_power(dev, true);
+	else
+		intel_lvds_set_power(dev, false);
+}
+
+static int intel_lvds_mode_valid(struct drm_connector *connector,
+				 struct drm_display_mode *mode)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_display_mode *fixed_mode = dev_priv->panel_fixed_mode;
+
+	if (fixed_mode)	{
+		if (mode->hdisplay > fixed_mode->hdisplay)
+			return MODE_PANEL;
+		if (mode->vdisplay > fixed_mode->vdisplay)
+			return MODE_PANEL;
+	}
+
+	return MODE_OK;
+}
+
+static bool intel_lvds_mode_fixup(struct drm_encoder *encoder,
+				  struct drm_display_mode *mode,
+				  struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
+	struct drm_encoder *tmp_encoder;
+
+	/* Should never happen!! */
+	if (!IS_I965G(dev) && intel_crtc->pipe == 0) {
+		printk(KERN_ERR "Can't support LVDS on pipe A\n");
+		return false;
+	}
+
+	/* Should never happen!! */
+	list_for_each_entry(tmp_encoder, &dev->mode_config.encoder_list, head) {
+		if (tmp_encoder != encoder && tmp_encoder->crtc == encoder->crtc) {
+			printk(KERN_ERR "Can't enable LVDS and another "
+			       "encoder on the same pipe\n");
+			return false;
+		}
+	}
+
+	/*
+	 * If we have timings from the BIOS for the panel, put them in
+	 * to the adjusted mode.  The CRTC will be set up for this mode,
+	 * with the panel scaling set up to source from the H/VDisplay
+	 * of the original mode.
+	 */
+	if (dev_priv->panel_fixed_mode != NULL) {
+		adjusted_mode->hdisplay = dev_priv->panel_fixed_mode->hdisplay;
+		adjusted_mode->hsync_start =
+			dev_priv->panel_fixed_mode->hsync_start;
+		adjusted_mode->hsync_end =
+			dev_priv->panel_fixed_mode->hsync_end;
+		adjusted_mode->htotal = dev_priv->panel_fixed_mode->htotal;
+		adjusted_mode->vdisplay = dev_priv->panel_fixed_mode->vdisplay;
+		adjusted_mode->vsync_start =
+			dev_priv->panel_fixed_mode->vsync_start;
+		adjusted_mode->vsync_end =
+			dev_priv->panel_fixed_mode->vsync_end;
+		adjusted_mode->vtotal = dev_priv->panel_fixed_mode->vtotal;
+		adjusted_mode->clock = dev_priv->panel_fixed_mode->clock;
+		drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V);
+	}
+
+	/*
+	 * XXX: It would be nice to support lower refresh rates on the
+	 * panels to reduce power consumption, and perhaps match the
+	 * user's requested refresh rate.
+	 */
+
+	return true;
+}
+
+static void intel_lvds_prepare(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL);
+	dev_priv->backlight_duty_cycle = (dev_priv->saveBLC_PWM_CTL &
+				       BACKLIGHT_DUTY_CYCLE_MASK);
+
+	intel_lvds_set_power(dev, false);
+}
+
+static void intel_lvds_commit( struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	if (dev_priv->backlight_duty_cycle == 0)
+		dev_priv->backlight_duty_cycle =
+			intel_lvds_get_max_backlight(dev);
+
+	intel_lvds_set_power(dev, true);
+}
+
+static void intel_lvds_mode_set(struct drm_encoder *encoder,
+				struct drm_display_mode *mode,
+				struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
+	u32 pfit_control;
+
+	/*
+	 * The LVDS pin pair will already have been turned on in the
+	 * intel_crtc_mode_set since it has a large impact on the DPLL
+	 * settings.
+	 */
+
+	/*
+	 * Enable automatic panel scaling so that non-native modes fill the
+	 * screen.  Should be enabled before the pipe is enabled, according to
+	 * register description and PRM.
+	 */
+	if (mode->hdisplay != adjusted_mode->hdisplay ||
+	    mode->vdisplay != adjusted_mode->vdisplay)
+		pfit_control = (PFIT_ENABLE | VERT_AUTO_SCALE |
+				HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR |
+				HORIZ_INTERP_BILINEAR);
+	else
+		pfit_control = 0;
+
+	if (!IS_I965G(dev)) {
+		if (dev_priv->panel_wants_dither)
+			pfit_control |= PANEL_8TO6_DITHER_ENABLE;
+	}
+	else
+		pfit_control |= intel_crtc->pipe << PFIT_PIPE_SHIFT;
+
+	I915_WRITE(PFIT_CONTROL, pfit_control);
+}
+
+/**
+ * Detect the LVDS connection.
+ *
+ * This always returns CONNECTOR_STATUS_CONNECTED.  This connector should only have
+ * been set up if the LVDS was actually connected anyway.
+ */
+static enum drm_connector_status intel_lvds_detect(struct drm_connector *connector)
+{
+	return connector_status_connected;
+}
+
+/**
+ * Return the list of DDC modes if available, or the BIOS fixed mode otherwise.
+ */
+static int intel_lvds_get_modes(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct intel_output *intel_output = to_intel_output(connector);
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int ret = 0;
+
+	ret = intel_ddc_get_modes(intel_output);
+
+	if (ret)
+		return ret;
+
+	/* Didn't get an EDID, so
+	 * Set wide sync ranges so we get all modes
+	 * handed to valid_mode for checking
+	 */
+	connector->display_info.min_vfreq = 0;
+	connector->display_info.max_vfreq = 200;
+	connector->display_info.min_hfreq = 0;
+	connector->display_info.max_hfreq = 200;
+
+	if (dev_priv->panel_fixed_mode != NULL) {
+		struct drm_display_mode *mode;
+
+		mutex_unlock(&dev->mode_config.mutex);
+		mode = drm_mode_duplicate(dev, dev_priv->panel_fixed_mode);
+		drm_mode_probed_add(connector, mode);
+		mutex_unlock(&dev->mode_config.mutex);
+
+		return 1;
+	}
+
+	return 0;
+}
+
+/**
+ * intel_lvds_destroy - unregister and free LVDS structures
+ * @connector: connector to free
+ *
+ * Unregister the DDC bus for this connector then free the driver private
+ * structure.
+ */
+static void intel_lvds_destroy(struct drm_connector *connector)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+
+	if (intel_output->ddc_bus)
+		intel_i2c_destroy(intel_output->ddc_bus);
+	drm_sysfs_connector_remove(connector);
+	drm_connector_cleanup(connector);
+	kfree(connector);
+}
+
+static const struct drm_encoder_helper_funcs intel_lvds_helper_funcs = {
+	.dpms = intel_lvds_dpms,
+	.mode_fixup = intel_lvds_mode_fixup,
+	.prepare = intel_lvds_prepare,
+	.mode_set = intel_lvds_mode_set,
+	.commit = intel_lvds_commit,
+};
+
+static const struct drm_connector_helper_funcs intel_lvds_connector_helper_funcs = {
+	.get_modes = intel_lvds_get_modes,
+	.mode_valid = intel_lvds_mode_valid,
+	.best_encoder = intel_best_encoder,
+};
+
+static const struct drm_connector_funcs intel_lvds_connector_funcs = {
+	.save = intel_lvds_save,
+	.restore = intel_lvds_restore,
+	.detect = intel_lvds_detect,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = intel_lvds_destroy,
+};
+
+
+static void intel_lvds_enc_destroy(struct drm_encoder *encoder)
+{
+	drm_encoder_cleanup(encoder);
+}
+
+static const struct drm_encoder_funcs intel_lvds_enc_funcs = {
+	.destroy = intel_lvds_enc_destroy,
+};
+
+
+
+/**
+ * intel_lvds_init - setup LVDS connectors on this device
+ * @dev: drm device
+ *
+ * Create the connector, register the LVDS DDC bus, and try to figure out what
+ * modes we can display on the LVDS panel (if present).
+ */
+void intel_lvds_init(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_output *intel_output;
+	struct drm_connector *connector;
+	struct drm_encoder *encoder;
+	struct drm_display_mode *scan; /* *modes, *bios_mode; */
+	struct drm_crtc *crtc;
+	u32 lvds;
+	int pipe;
+
+	intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL);
+	if (!intel_output) {
+		return;
+	}
+
+	connector = &intel_output->base;
+	encoder = &intel_output->enc;
+	drm_connector_init(dev, &intel_output->base, &intel_lvds_connector_funcs,
+			   DRM_MODE_CONNECTOR_LVDS);
+
+	drm_encoder_init(dev, &intel_output->enc, &intel_lvds_enc_funcs,
+			 DRM_MODE_ENCODER_LVDS);
+
+	drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc);
+	intel_output->type = INTEL_OUTPUT_LVDS;
+
+	drm_encoder_helper_add(encoder, &intel_lvds_helper_funcs);
+	drm_connector_helper_add(connector, &intel_lvds_connector_helper_funcs);
+	connector->display_info.subpixel_order = SubPixelHorizontalRGB;
+	connector->interlace_allowed = false;
+	connector->doublescan_allowed = false;
+
+
+	/*
+	 * LVDS discovery:
+	 * 1) check for EDID on DDC
+	 * 2) check for VBT data
+	 * 3) check to see if LVDS is already on
+	 *    if none of the above, no panel
+	 * 4) make sure lid is open
+	 *    if closed, act like it's not there for now
+	 */
+
+	/* Set up the DDC bus. */
+	intel_output->ddc_bus = intel_i2c_create(dev, GPIOC, "LVDSDDC_C");
+	if (!intel_output->ddc_bus) {
+		dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration "
+			   "failed.\n");
+		goto failed;
+	}
+
+	/*
+	 * Attempt to get the fixed panel mode from DDC.  Assume that the
+	 * preferred mode is the right one.
+	 */
+	intel_ddc_get_modes(intel_output);
+
+	list_for_each_entry(scan, &connector->probed_modes, head) {
+		mutex_lock(&dev->mode_config.mutex);
+		if (scan->type & DRM_MODE_TYPE_PREFERRED) {
+			dev_priv->panel_fixed_mode =
+				drm_mode_duplicate(dev, scan);
+			mutex_unlock(&dev->mode_config.mutex);
+			goto out; /* FIXME: check for quirks */
+		}
+		mutex_unlock(&dev->mode_config.mutex);
+	}
+
+	/* Failed to get EDID, what about VBT? */
+	if (dev_priv->vbt_mode) {
+		mutex_lock(&dev->mode_config.mutex);
+		dev_priv->panel_fixed_mode =
+			drm_mode_duplicate(dev, dev_priv->vbt_mode);
+		mutex_unlock(&dev->mode_config.mutex);
+	}
+
+	/*
+	 * If we didn't get EDID, try checking if the panel is already turned
+	 * on.  If so, assume that whatever is currently programmed is the
+	 * correct mode.
+	 */
+	lvds = I915_READ(LVDS);
+	pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0;
+	crtc = intel_get_crtc_from_pipe(dev, pipe);
+
+	if (crtc && (lvds & LVDS_PORT_EN)) {
+		dev_priv->panel_fixed_mode = intel_crtc_mode_get(dev, crtc);
+		if (dev_priv->panel_fixed_mode) {
+			dev_priv->panel_fixed_mode->type |=
+				DRM_MODE_TYPE_PREFERRED;
+			goto out; /* FIXME: check for quirks */
+		}
+	}
+
+	/* If we still don't have a mode after all that, give up. */
+	if (!dev_priv->panel_fixed_mode)
+		goto failed;
+
+	/* FIXME: detect aopen & mac mini type stuff automatically? */
+	/*
+	 * Blacklist machines with BIOSes that list an LVDS panel without
+	 * actually having one.
+	 */
+	if (IS_I945GM(dev)) {
+		/* aopen mini pc */
+		if (dev->pdev->subsystem_vendor == 0xa0a0)
+			goto failed;
+
+		if ((dev->pdev->subsystem_vendor == 0x8086) &&
+		    (dev->pdev->subsystem_device == 0x7270)) {
+			/* It's a Mac Mini or Macbook Pro.
+			 *
+			 * Apple hardware is out to get us.  The macbook pro
+			 * has a real LVDS panel, but the mac mini does not,
+			 * and they have the same device IDs.  We'll
+			 * distinguish by panel size, on the assumption
+			 * that Apple isn't about to make any machines with an
+			 * 800x600 display.
+			 */
+
+			if (dev_priv->panel_fixed_mode != NULL &&
+			    dev_priv->panel_fixed_mode->hdisplay == 800 &&
+			    dev_priv->panel_fixed_mode->vdisplay == 600) {
+				DRM_DEBUG("Suspected Mac Mini, ignoring the LVDS\n");
+				goto failed;
+			}
+		}
+	}
+
+
+out:
+	drm_sysfs_connector_add(connector);
+	return;
+
+failed:
+	DRM_DEBUG("No LVDS modes found, disabling.\n");
+	if (intel_output->ddc_bus)
+		intel_i2c_destroy(intel_output->ddc_bus);
+	drm_connector_cleanup(connector);
+	kfree(connector);
+}