Merge branch 'for-5.12/intel-ish' into for-linus

- power management improvements for intel-ish driver from Zhang Lixu

3 files changed, 81 insertions, 1 deletions

diff --git a/drivers/hid/intel-ish-hid/ipc/hw-ish.h b/drivers/hid/intel-ish-hid/ipc/hw-ish.h
index 21b0e6123754..21b87e4003af 100644
--- a/drivers/hid/intel-ish-hid/ipc/hw-ish.h
+++ b/drivers/hid/intel-ish-hid/ipc/hw-ish.h
@@ -82,5 +82,6 @@ struct ishtp_device *ish_dev_init(struct pci_dev *pdev);
 int ish_hw_start(struct ishtp_device *dev);
 void ish_device_disable(struct ishtp_device *dev);
 int ish_disable_dma(struct ishtp_device *dev);
+void ish_set_host_ready(struct ishtp_device *dev);
 
 #endif /* _ISHTP_HW_ISH_H_ */
diff --git a/drivers/hid/intel-ish-hid/ipc/ipc.c b/drivers/hid/intel-ish-hid/ipc/ipc.c
index a45ac7fa417b..47bbeb8b492b 100644
--- a/drivers/hid/intel-ish-hid/ipc/ipc.c
+++ b/drivers/hid/intel-ish-hid/ipc/ipc.c
@@ -193,6 +193,33 @@ static void ish_clr_host_rdy(struct ishtp_device *dev)
 	ish_reg_write(dev, IPC_REG_HOST_COMM, host_status);
 }
 
+static bool ish_chk_host_rdy(struct ishtp_device *dev)
+{
+	uint32_t host_status = ish_reg_read(dev, IPC_REG_HOST_COMM);
+
+	return (host_status & IPC_HOSTCOMM_READY_BIT);
+}
+
+/**
+ * ish_set_host_ready() - reconfig ipc host registers
+ * @dev: ishtp device pointer
+ *
+ * Set host to ready state
+ * This API is called in some case:
+ *    fw is still on, but ipc is powered down.
+ *    such as OOB case.
+ *
+ * Return: 0 for success else error fault code
+ */
+void ish_set_host_ready(struct ishtp_device *dev)
+{
+	if (ish_chk_host_rdy(dev))
+		return;
+
+	ish_set_host_rdy(dev);
+	set_host_ready(dev);
+}
+
 /**
  * _ishtp_read_hdr() - Read message header
  * @dev: ISHTP device pointer
diff --git a/drivers/hid/intel-ish-hid/ipc/pci-ish.c b/drivers/hid/intel-ish-hid/ipc/pci-ish.c
index 6dea657b7b15..06081cf9b85a 100644
--- a/drivers/hid/intel-ish-hid/ipc/pci-ish.c
+++ b/drivers/hid/intel-ish-hid/ipc/pci-ish.c
@@ -5,6 +5,7 @@
  * Copyright (c) 2014-2016, Intel Corporation.
  */
 
+#include <linux/acpi.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/kernel.h>
@@ -112,6 +113,42 @@ static inline bool ish_should_leave_d0i3(struct pci_dev *pdev)
 	return !pm_resume_via_firmware() || pdev->device == CHV_DEVICE_ID;
 }
 
+static int enable_gpe(struct device *dev)
+{
+#ifdef CONFIG_ACPI
+	acpi_status acpi_sts;
+	struct acpi_device *adev;
+	struct acpi_device_wakeup *wakeup;
+
+	adev = ACPI_COMPANION(dev);
+	if (!adev) {
+		dev_err(dev, "get acpi handle failed\n");
+		return -ENODEV;
+	}
+	wakeup = &adev->wakeup;
+
+	acpi_sts = acpi_enable_gpe(wakeup->gpe_device, wakeup->gpe_number);
+	if (ACPI_FAILURE(acpi_sts)) {
+		dev_err(dev, "enable ose_gpe failed\n");
+		return -EIO;
+	}
+
+	return 0;
+#else
+	return -ENODEV;
+#endif
+}
+
+static void enable_pme_wake(struct pci_dev *pdev)
+{
+	if ((pci_pme_capable(pdev, PCI_D0) ||
+	     pci_pme_capable(pdev, PCI_D3hot) ||
+	     pci_pme_capable(pdev, PCI_D3cold)) && !enable_gpe(&pdev->dev)) {
+		pci_pme_active(pdev, true);
+		dev_dbg(&pdev->dev, "ish ipc driver pme wake enabled\n");
+	}
+}
+
 /**
  * ish_probe() - PCI driver probe callback
  * @pdev:	pci device
@@ -180,6 +217,10 @@ static int ish_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	init_waitqueue_head(&ishtp->suspend_wait);
 	init_waitqueue_head(&ishtp->resume_wait);
 
+	/* Enable PME for EHL */
+	if (pdev->device == EHL_Ax_DEVICE_ID)
+		enable_pme_wake(pdev);
+
 	ret = ish_init(ishtp);
 	if (ret)
 		return ret;
@@ -219,11 +260,15 @@ static void __maybe_unused ish_resume_handler(struct work_struct *work)
 {
 	struct pci_dev *pdev = to_pci_dev(ish_resume_device);
 	struct ishtp_device *dev = pci_get_drvdata(pdev);
+	uint32_t fwsts = dev->ops->get_fw_status(dev);
 	int ret;
 
-	if (ish_should_leave_d0i3(pdev) && !dev->suspend_flag) {
+	if (ish_should_leave_d0i3(pdev) && !dev->suspend_flag
+			&& IPC_IS_ISH_ILUP(fwsts)) {
 		disable_irq_wake(pdev->irq);
 
+		ish_set_host_ready(dev);
+
 		ishtp_send_resume(dev);
 
 		/* Waiting to get resume response */
@@ -318,6 +363,13 @@ static int __maybe_unused ish_resume(struct device *device)
 	struct pci_dev *pdev = to_pci_dev(device);
 	struct ishtp_device *dev = pci_get_drvdata(pdev);
 
+	/* add this to finish power flow for EHL */
+	if (dev->pdev->device == EHL_Ax_DEVICE_ID) {
+		pci_set_power_state(pdev, PCI_D0);
+		enable_pme_wake(pdev);
+		dev_dbg(dev->devc, "set power state to D0 for ehl\n");
+	}
+
 	ish_resume_device = device;
 	dev->resume_flag = 1;