hwmon: (adt7410) Add support for the adt7310/adt7320

The adt7310/adt7320 is the SPI version of the adt7410/adt7420. The register map
layout is a bit different, i.e. the register addresses differ between the two
variants, but the bit layouts of the individual registers are identical. So both
chip variants can easily be supported by the same driver. The issue of non
matching register address layouts is solved by a simple look-up table which
translates the I2C addresses to the SPI addresses.

The patch moves the bulk of the adt7410 driver to a common module that will be
shared by the adt7410 and adt7310 drivers. This common module implements the
driver logic and uses a set of virtual functions to perform IO access. The
adt7410 and adt7310 driver modules provide proper implementations of these IO
accessor functions for I2C respective SPI.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

1 files changed, 31 insertions, 436 deletions

diff --git a/drivers/hwmon/adt7410.c b/drivers/hwmon/adt7410.c
index 894ff71499b3..d294445c86dd 100644
--- a/drivers/hwmon/adt7410.c
+++ b/drivers/hwmon/adt7410.c
@@ -1,485 +1,80 @@
 /*
- * adt7410.c - Part of lm_sensors, Linux kernel modules for hardware
- *	 monitoring
- * This driver handles the ADT7410 and compatible digital temperature sensors.
- * Hartmut Knaack <knaack.h@gmx.de> 2012-07-22
- * based on lm75.c by Frodo Looijaard <frodol@dds.nl>
- * and adt7410.c from iio-staging by Sonic Zhang <sonic.zhang@analog.com>
+ * ADT7410/ADT7420 digital temperature sensor driver
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * Copyright 2012-2013 Analog Devices Inc.
+ *   Author: Lars-Peter Clausen <lars@metafoo.de>
  *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/module.h>
 #include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/jiffies.h>
 #include <linux/i2c.h>
-#include <linux/hwmon.h>
-#include <linux/hwmon-sysfs.h>
-#include <linux/err.h>
-#include <linux/mutex.h>
-#include <linux/delay.h>
-
-/*
- * ADT7410 registers definition
- */
-
-#define ADT7410_TEMPERATURE		0
-#define ADT7410_STATUS			2
-#define ADT7410_CONFIG			3
-#define ADT7410_T_ALARM_HIGH		4
-#define ADT7410_T_ALARM_LOW		6
-#define ADT7410_T_CRIT			8
-#define ADT7410_T_HYST			0xA
-
-/*
- * ADT7410 status
- */
-#define ADT7410_STAT_T_LOW		(1 << 4)
-#define ADT7410_STAT_T_HIGH		(1 << 5)
-#define ADT7410_STAT_T_CRIT		(1 << 6)
-#define ADT7410_STAT_NOT_RDY		(1 << 7)
-
-/*
- * ADT7410 config
- */
-#define ADT7410_FAULT_QUEUE_MASK	(1 << 0 | 1 << 1)
-#define ADT7410_CT_POLARITY		(1 << 2)
-#define ADT7410_INT_POLARITY		(1 << 3)
-#define ADT7410_EVENT_MODE		(1 << 4)
-#define ADT7410_MODE_MASK		(1 << 5 | 1 << 6)
-#define ADT7410_FULL			(0 << 5 | 0 << 6)
-#define ADT7410_PD			(1 << 5 | 1 << 6)
-#define ADT7410_RESOLUTION		(1 << 7)
-
-/*
- * ADT7410 masks
- */
-#define ADT7410_T13_VALUE_MASK			0xFFF8
-#define ADT7410_T_HYST_MASK			0xF
-
-/* straight from the datasheet */
-#define ADT7410_TEMP_MIN (-55000)
-#define ADT7410_TEMP_MAX 150000
-
-enum adt7410_type {		/* keep sorted in alphabetical order */
-	adt7410,
-};
-
-static const u8 ADT7410_REG_TEMP[4] = {
-	ADT7410_TEMPERATURE,		/* input */
-	ADT7410_T_ALARM_HIGH,		/* high */
-	ADT7410_T_ALARM_LOW,		/* low */
-	ADT7410_T_CRIT,			/* critical */
-};
-
-/* Each client has this additional data */
-struct adt7410_data {
-	struct device		*hwmon_dev;
-	struct mutex		update_lock;
-	u8			config;
-	u8			oldconfig;
-	bool			valid;		/* true if registers valid */
-	unsigned long		last_updated;	/* In jiffies */
-	s16			temp[4];	/* Register values,
-						   0 = input
-						   1 = high
-						   2 = low
-						   3 = critical */
-	u8			hyst;		/* hysteresis offset */
-};
-
-/*
- * adt7410 register access by I2C
- */
-static int adt7410_temp_ready(struct i2c_client *client)
-{
-	int i, status;
-
-	for (i = 0; i < 6; i++) {
-		status = i2c_smbus_read_byte_data(client, ADT7410_STATUS);
-		if (status < 0)
-			return status;
-		if (!(status & ADT7410_STAT_NOT_RDY))
-			return 0;
-		msleep(60);
-	}
-	return -ETIMEDOUT;
-}
-
-static int adt7410_update_temp(struct device *dev)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	struct adt7410_data *data = i2c_get_clientdata(client);
-	int ret = 0;
-
-	mutex_lock(&data->update_lock);
-
-	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
-	    || !data->valid) {
-		int temp;
-
-		dev_dbg(&client->dev, "Starting update\n");
-
-		ret = adt7410_temp_ready(client); /* check for new value */
-		if (ret)
-			goto abort;
-
-		temp = i2c_smbus_read_word_swapped(client, ADT7410_REG_TEMP[0]);
-		if (temp < 0) {
-			ret = temp;
-			dev_dbg(dev, "Failed to read value: reg %d, error %d\n",
-				ADT7410_REG_TEMP[0], ret);
-			goto abort;
-		}
-		data->temp[0] = temp;
-
-		data->last_updated = jiffies;
-		data->valid = true;
-	}
-
-abort:
-	mutex_unlock(&data->update_lock);
-	return ret;
-}
-
-static int adt7410_fill_cache(struct i2c_client *client)
-{
-	struct adt7410_data *data = i2c_get_clientdata(client);
-	int ret;
-	int i;
-
-	for (i = 1; i < ARRAY_SIZE(ADT7410_REG_TEMP); i++) {
-		ret = i2c_smbus_read_word_swapped(client, ADT7410_REG_TEMP[i]);
-		if (ret < 0) {
-			dev_dbg(&client->dev,
-				"Failed to read value: reg %d, error %d\n",
-				ADT7410_REG_TEMP[i], ret);
-			return ret;
-		}
-		data->temp[i] = ret;
-	}
-
-	ret = i2c_smbus_read_byte_data(client, ADT7410_T_HYST);
-	if (ret < 0) {
-		dev_dbg(&client->dev,
-			"Failed to read value: hyst reg, error %d\n",
-			ret);
-		return ret;
-	}
-	data->hyst = ret;
-
-	return 0;
-}
-
-static s16 ADT7410_TEMP_TO_REG(long temp)
-{
-	return DIV_ROUND_CLOSEST(clamp_val(temp, ADT7410_TEMP_MIN,
-					   ADT7410_TEMP_MAX) * 128, 1000);
-}
-
-static int ADT7410_REG_TO_TEMP(struct adt7410_data *data, s16 reg)
-{
-	/* in 13 bit mode, bits 0-2 are status flags - mask them out */
-	if (!(data->config & ADT7410_RESOLUTION))
-		reg &= ADT7410_T13_VALUE_MASK;
-	/*
-	 * temperature is stored in twos complement format, in steps of
-	 * 1/128°C
-	 */
-	return DIV_ROUND_CLOSEST(reg * 1000, 128);
-}
-
-/*-----------------------------------------------------------------------*/
 
-/* sysfs attributes for hwmon */
+#include "adt7x10.h"
 
-static ssize_t adt7410_show_temp(struct device *dev,
-				 struct device_attribute *da, char *buf)
+static int adt7410_i2c_read_word(struct device *dev, u8 reg)
 {
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
-	struct i2c_client *client = to_i2c_client(dev);
-	struct adt7410_data *data = i2c_get_clientdata(client);
-
-	if (attr->index == 0) {
-		int ret;
-
-		ret = adt7410_update_temp(dev);
-		if (ret)
-			return ret;
-	}
-
-	return sprintf(buf, "%d\n", ADT7410_REG_TO_TEMP(data,
-		       data->temp[attr->index]));
+	return i2c_smbus_read_word_swapped(to_i2c_client(dev), reg);
 }
 
-static ssize_t adt7410_set_temp(struct device *dev,
-				struct device_attribute *da,
-				const char *buf, size_t count)
+static int adt7410_i2c_write_word(struct device *dev, u8 reg, u16 data)
 {
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
-	struct i2c_client *client = to_i2c_client(dev);
-	struct adt7410_data *data = i2c_get_clientdata(client);
-	int nr = attr->index;
-	long temp;
-	int ret;
-
-	ret = kstrtol(buf, 10, &temp);
-	if (ret)
-		return ret;
-
-	mutex_lock(&data->update_lock);
-	data->temp[nr] = ADT7410_TEMP_TO_REG(temp);
-	ret = i2c_smbus_write_word_swapped(client, ADT7410_REG_TEMP[nr],
-					   data->temp[nr]);
-	if (ret)
-		count = ret;
-	mutex_unlock(&data->update_lock);
-	return count;
+	return i2c_smbus_write_word_swapped(to_i2c_client(dev), reg, data);
 }
 
-static ssize_t adt7410_show_t_hyst(struct device *dev,
-				   struct device_attribute *da,
-				   char *buf)
+static int adt7410_i2c_read_byte(struct device *dev, u8 reg)
 {
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
-	struct i2c_client *client = to_i2c_client(dev);
-	struct adt7410_data *data = i2c_get_clientdata(client);
-	int nr = attr->index;
-	int hyst;
-
-	hyst = (data->hyst & ADT7410_T_HYST_MASK) * 1000;
-
-	/*
-	 * hysteresis is stored as a 4 bit offset in the device, convert it
-	 * to an absolute value
-	 */
-	if (nr == 2)	/* min has positive offset, others have negative */
-		hyst = -hyst;
-	return sprintf(buf, "%d\n",
-		       ADT7410_REG_TO_TEMP(data, data->temp[nr]) - hyst);
+	return i2c_smbus_read_byte_data(to_i2c_client(dev), reg);
 }
 
-static ssize_t adt7410_set_t_hyst(struct device *dev,
-				  struct device_attribute *da,
-				  const char *buf, size_t count)
+static int adt7410_i2c_write_byte(struct device *dev, u8 reg, u8 data)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct adt7410_data *data = i2c_get_clientdata(client);
-	int limit, ret;
-	long hyst;
-
-	ret = kstrtol(buf, 10, &hyst);
-	if (ret)
-		return ret;
-	/* convert absolute hysteresis value to a 4 bit delta value */
-	limit = ADT7410_REG_TO_TEMP(data, data->temp[1]);
-	hyst = clamp_val(hyst, ADT7410_TEMP_MIN, ADT7410_TEMP_MAX);
-	data->hyst = clamp_val(DIV_ROUND_CLOSEST(limit - hyst, 1000), 0,
-			       ADT7410_T_HYST_MASK);
-	ret = i2c_smbus_write_byte_data(client, ADT7410_T_HYST, data->hyst);
-	if (ret)
-		return ret;
-
-	return count;
+	return i2c_smbus_write_byte_data(to_i2c_client(dev), reg, data);
 }
 
-static ssize_t adt7410_show_alarm(struct device *dev,
-				  struct device_attribute *da,
-				  char *buf)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
-	int ret;
-
-	ret = i2c_smbus_read_byte_data(client, ADT7410_STATUS);
-	if (ret < 0)
-		return ret;
-
-	return sprintf(buf, "%d\n", !!(ret & attr->index));
-}
-
-static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, adt7410_show_temp, NULL, 0);
-static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO,
-			  adt7410_show_temp, adt7410_set_temp, 1);
-static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO,
-			  adt7410_show_temp, adt7410_set_temp, 2);
-static SENSOR_DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO,
-			  adt7410_show_temp, adt7410_set_temp, 3);
-static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO,
-			  adt7410_show_t_hyst, adt7410_set_t_hyst, 1);
-static SENSOR_DEVICE_ATTR(temp1_min_hyst, S_IRUGO,
-			  adt7410_show_t_hyst, NULL, 2);
-static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IRUGO,
-			  adt7410_show_t_hyst, NULL, 3);
-static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, adt7410_show_alarm,
-			  NULL, ADT7410_STAT_T_LOW);
-static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, adt7410_show_alarm,
-			  NULL, ADT7410_STAT_T_HIGH);
-static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, adt7410_show_alarm,
-			  NULL, ADT7410_STAT_T_CRIT);
-
-static struct attribute *adt7410_attributes[] = {
-	&sensor_dev_attr_temp1_input.dev_attr.attr,
-	&sensor_dev_attr_temp1_max.dev_attr.attr,
-	&sensor_dev_attr_temp1_min.dev_attr.attr,
-	&sensor_dev_attr_temp1_crit.dev_attr.attr,
-	&sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
-	&sensor_dev_attr_temp1_min_hyst.dev_attr.attr,
-	&sensor_dev_attr_temp1_crit_hyst.dev_attr.attr,
-	&sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
-	&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
-	&sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
-	NULL
+static const struct adt7x10_ops adt7410_i2c_ops = {
+	.read_word = adt7410_i2c_read_word,
+	.write_word = adt7410_i2c_write_word,
+	.read_byte = adt7410_i2c_read_byte,
+	.write_byte = adt7410_i2c_write_byte,
 };
 
-static const struct attribute_group adt7410_group = {
-	.attrs = adt7410_attributes,
-};
-
-/*-----------------------------------------------------------------------*/
-
-/* device probe and removal */
-
-static int adt7410_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id)
+static int adt7410_i2c_probe(struct i2c_client *client,
+	const struct i2c_device_id *id)
 {
-	struct adt7410_data *data;
-	int ret;
-
 	if (!i2c_check_functionality(client->adapter,
 			I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA))
 		return -ENODEV;
 
-	data = devm_kzalloc(&client->dev, sizeof(struct adt7410_data),
-			    GFP_KERNEL);
-	if (!data)
-		return -ENOMEM;
-
-	i2c_set_clientdata(client, data);
-	mutex_init(&data->update_lock);
-
-	/* configure as specified */
-	ret = i2c_smbus_read_byte_data(client, ADT7410_CONFIG);
-	if (ret < 0) {
-		dev_dbg(&client->dev, "Can't read config? %d\n", ret);
-		return ret;
-	}
-	data->oldconfig = ret;
-	/*
-	 * Set to 16 bit resolution, continous conversion and comparator mode.
-	 */
-	ret &= ~ADT7410_MODE_MASK;
-	data->config = ret | ADT7410_FULL | ADT7410_RESOLUTION |
-			ADT7410_EVENT_MODE;
-	if (data->config != data->oldconfig) {
-		ret = i2c_smbus_write_byte_data(client, ADT7410_CONFIG,
-						data->config);
-		if (ret)
-			return ret;
-	}
-	dev_dbg(&client->dev, "Config %02x\n", data->config);
-
-	ret = adt7410_fill_cache(client);
-	if (ret)
-		goto exit_restore;
-
-	/* Register sysfs hooks */
-	ret = sysfs_create_group(&client->dev.kobj, &adt7410_group);
-	if (ret)
-		goto exit_restore;
-
-	data->hwmon_dev = hwmon_device_register(&client->dev);
-	if (IS_ERR(data->hwmon_dev)) {
-		ret = PTR_ERR(data->hwmon_dev);
-		goto exit_remove;
-	}
-
-	dev_info(&client->dev, "sensor '%s'\n", client->name);
-
-	return 0;
-
-exit_remove:
-	sysfs_remove_group(&client->dev.kobj, &adt7410_group);
-exit_restore:
-	i2c_smbus_write_byte_data(client, ADT7410_CONFIG, data->oldconfig);
-	return ret;
+	return adt7x10_probe(&client->dev, NULL, &adt7410_i2c_ops);
 }
 
-static int adt7410_remove(struct i2c_client *client)
+static int adt7410_i2c_remove(struct i2c_client *client)
 {
-	struct adt7410_data *data = i2c_get_clientdata(client);
-
-	hwmon_device_unregister(data->hwmon_dev);
-	sysfs_remove_group(&client->dev.kobj, &adt7410_group);
-	if (data->oldconfig != data->config)
-		i2c_smbus_write_byte_data(client, ADT7410_CONFIG,
-					  data->oldconfig);
-	return 0;
+	return adt7x10_remove(&client->dev);
 }
 
 static const struct i2c_device_id adt7410_ids[] = {
-	{ "adt7410", adt7410, },
-	{ "adt7420", adt7410, },
-	{ /* LIST END */ }
+	{ "adt7410", 0 },
+	{ "adt7420", 0 },
+	{}
 };
 MODULE_DEVICE_TABLE(i2c, adt7410_ids);
 
-#ifdef CONFIG_PM_SLEEP
-static int adt7410_suspend(struct device *dev)
-{
-	int ret;
-	struct i2c_client *client = to_i2c_client(dev);
-	struct adt7410_data *data = i2c_get_clientdata(client);
-
-	ret = i2c_smbus_write_byte_data(client, ADT7410_CONFIG,
-					data->config | ADT7410_PD);
-	return ret;
-}
-
-static int adt7410_resume(struct device *dev)
-{
-	int ret;
-	struct i2c_client *client = to_i2c_client(dev);
-	struct adt7410_data *data = i2c_get_clientdata(client);
-
-	ret = i2c_smbus_write_byte_data(client, ADT7410_CONFIG, data->config);
-	return ret;
-}
-
-static SIMPLE_DEV_PM_OPS(adt7410_dev_pm_ops, adt7410_suspend, adt7410_resume);
-
-#define ADT7410_DEV_PM_OPS (&adt7410_dev_pm_ops)
-#else
-#define ADT7410_DEV_PM_OPS NULL
-#endif /* CONFIG_PM */
-
 static struct i2c_driver adt7410_driver = {
 	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "adt7410",
-		.pm	= ADT7410_DEV_PM_OPS,
+		.pm	= ADT7X10_DEV_PM_OPS,
 	},
-	.probe		= adt7410_probe,
-	.remove		= adt7410_remove,
+	.probe		= adt7410_i2c_probe,
+	.remove		= adt7410_i2c_remove,
 	.id_table	= adt7410_ids,
 	.address_list	= I2C_ADDRS(0x48, 0x49, 0x4a, 0x4b),
 };
-
 module_i2c_driver(adt7410_driver);
 
-MODULE_AUTHOR("Hartmut Knaack");
-MODULE_DESCRIPTION("ADT7410/ADT7420 driver");
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("ADT7410/AD7420 driver");
 MODULE_LICENSE("GPL");