hwmon: (sch5627) Factor out some code shared with sch5636 driver

This patch adds a new sch56xx-common.ko which contains code which will also
be used in the new sch5636 driver.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

1 files changed, 24 insertions, 310 deletions

diff --git a/drivers/hwmon/sch5627.c b/drivers/hwmon/sch5627.c
index 3494a4cce414..e3b5c6039c25 100644
--- a/drivers/hwmon/sch5627.c
+++ b/drivers/hwmon/sch5627.c
@@ -28,33 +28,15 @@
 #include <linux/hwmon-sysfs.h>
 #include <linux/err.h>
 #include <linux/mutex.h>
-#include <linux/io.h>
-#include <linux/acpi.h>
-#include <linux/delay.h>
+#include "sch56xx-common.h"
 
 #define DRVNAME "sch5627"
 #define DEVNAME DRVNAME /* We only support one model */
 
-#define SIO_SCH5627_EM_LD	0x0C	/* Embedded Microcontroller LD */
-#define SIO_UNLOCK_KEY		0x55	/* Key to enable Super-I/O */
-#define SIO_LOCK_KEY		0xAA	/* Key to disable Super-I/O */
-
-#define SIO_REG_LDSEL		0x07	/* Logical device select */
-#define SIO_REG_DEVID		0x20	/* Device ID */
-#define SIO_REG_ENABLE		0x30	/* Logical device enable */
-#define SIO_REG_ADDR		0x66	/* Logical device address (2 bytes) */
-
-#define SIO_SCH5627_ID		0xC6	/* Chipset ID */
-
-#define REGION_LENGTH		9
-
 #define SCH5627_HWMON_ID		0xa5
 #define SCH5627_COMPANY_ID		0x5c
 #define SCH5627_PRIMARY_ID		0xa0
 
-#define SCH5627_CMD_READ		0x02
-#define SCH5627_CMD_WRITE		0x03
-
 #define SCH5627_REG_BUILD_CODE		0x39
 #define SCH5627_REG_BUILD_ID		0x3a
 #define SCH5627_REG_HWMON_ID		0x3c
@@ -111,182 +93,6 @@ struct sch5627_data {
 	u16 in[SCH5627_NO_IN];
 };
 
-static struct platform_device *sch5627_pdev;
-
-/* Super I/O functions */
-static inline int superio_inb(int base, int reg)
-{
-	outb(reg, base);
-	return inb(base + 1);
-}
-
-static inline int superio_enter(int base)
-{
-	/* Don't step on other drivers' I/O space by accident */
-	if (!request_muxed_region(base, 2, DRVNAME)) {
-		pr_err("I/O address 0x%04x already in use\n", base);
-		return -EBUSY;
-	}
-
-	outb(SIO_UNLOCK_KEY, base);
-
-	return 0;
-}
-
-static inline void superio_select(int base, int ld)
-{
-	outb(SIO_REG_LDSEL, base);
-	outb(ld, base + 1);
-}
-
-static inline void superio_exit(int base)
-{
-	outb(SIO_LOCK_KEY, base);
-	release_region(base, 2);
-}
-
-static int sch5627_send_cmd(struct sch5627_data *data, u8 cmd, u16 reg, u8 v)
-{
-	u8 val;
-	int i;
-	/*
-	 * According to SMSC for the commands we use the maximum time for
-	 * the EM to respond is 15 ms, but testing shows in practice it
-	 * responds within 15-32 reads, so we first busy poll, and if
-	 * that fails sleep a bit and try again until we are way past
-	 * the 15 ms maximum response time.
-	 */
-	const int max_busy_polls = 64;
-	const int max_lazy_polls = 32;
-
-	/* (Optional) Write-Clear the EC to Host Mailbox Register */
-	val = inb(data->addr + 1);
-	outb(val, data->addr + 1);
-
-	/* Set Mailbox Address Pointer to first location in Region 1 */
-	outb(0x00, data->addr + 2);
-	outb(0x80, data->addr + 3);
-
-	/* Write Request Packet Header */
-	outb(cmd, data->addr + 4); /* VREG Access Type read:0x02 write:0x03 */
-	outb(0x01, data->addr + 5); /* # of Entries: 1 Byte (8-bit) */
-	outb(0x04, data->addr + 2); /* Mailbox AP to first data entry loc. */
-
-	/* Write Value field */
-	if (cmd == SCH5627_CMD_WRITE)
-		outb(v, data->addr + 4);
-
-	/* Write Address field */
-	outb(reg & 0xff, data->addr + 6);
-	outb(reg >> 8, data->addr + 7);
-
-	/* Execute the Random Access Command */
-	outb(0x01, data->addr); /* Write 01h to the Host-to-EC register */
-
-	/* EM Interface Polling "Algorithm" */
-	for (i = 0; i < max_busy_polls + max_lazy_polls; i++) {
-		if (i >= max_busy_polls)
-			msleep(1);
-		/* Read Interrupt source Register */
-		val = inb(data->addr + 8);
-		/* Write Clear the interrupt source bits */
-		if (val)
-			outb(val, data->addr + 8);
-		/* Command Completed ? */
-		if (val & 0x01)
-			break;
-	}
-	if (i == max_busy_polls + max_lazy_polls) {
-		pr_err("Max retries exceeded reading virtual "
-		       "register 0x%04hx (%d)\n", reg, 1);
-		return -EIO;
-	}
-
-	/*
-	 * According to SMSC we may need to retry this, but sofar I've always
-	 * seen this succeed in 1 try.
-	 */
-	for (i = 0; i < max_busy_polls; i++) {
-		/* Read EC-to-Host Register */
-		val = inb(data->addr + 1);
-		/* Command Completed ? */
-		if (val == 0x01)
-			break;
-
-		if (i == 0)
-			pr_warn("EC reports: 0x%02x reading virtual register "
-				"0x%04hx\n", (unsigned int)val, reg);
-	}
-	if (i == max_busy_polls) {
-		pr_err("Max retries exceeded reading virtual "
-		       "register 0x%04hx (%d)\n", reg, 2);
-		return -EIO;
-	}
-
-	/*
-	 * According to the SMSC app note we should now do:
-	 *
-	 * Set Mailbox Address Pointer to first location in Region 1 *
-	 * outb(0x00, data->addr + 2);
-	 * outb(0x80, data->addr + 3);
-	 *
-	 * But if we do that things don't work, so let's not.
-	 */
-
-	/* Read Value field */
-	if (cmd == SCH5627_CMD_READ)
-		return inb(data->addr + 4);
-
-	return 0;
-}
-
-static int sch5627_read_virtual_reg(struct sch5627_data *data, u16 reg)
-{
-	return sch5627_send_cmd(data, SCH5627_CMD_READ, reg, 0);
-}
-
-static int sch5627_write_virtual_reg(struct sch5627_data *data,
-				     u16 reg, u8 val)
-{
-	return sch5627_send_cmd(data, SCH5627_CMD_WRITE, reg, val);
-}
-
-static int sch5627_read_virtual_reg16(struct sch5627_data *data, u16 reg)
-{
-	int lsb, msb;
-
-	/* Read LSB first, this will cause the matching MSB to be latched */
-	lsb = sch5627_read_virtual_reg(data, reg);
-	if (lsb < 0)
-		return lsb;
-
-	msb = sch5627_read_virtual_reg(data, reg + 1);
-	if (msb < 0)
-		return msb;
-
-	return lsb | (msb << 8);
-}
-
-static int sch5627_read_virtual_reg12(struct sch5627_data *data, u16 msb_reg,
-				      u16 lsn_reg, int high_nibble)
-{
-	int msb, lsn;
-
-	/* Read MSB first, this will cause the matching LSN to be latched */
-	msb = sch5627_read_virtual_reg(data, msb_reg);
-	if (msb < 0)
-		return msb;
-
-	lsn = sch5627_read_virtual_reg(data, lsn_reg);
-	if (lsn < 0)
-		return lsn;
-
-	if (high_nibble)
-		return (msb << 4) | (lsn >> 4);
-	else
-		return (msb << 4) | (lsn & 0x0f);
-}
-
 static struct sch5627_data *sch5627_update_device(struct device *dev)
 {
 	struct sch5627_data *data = dev_get_drvdata(dev);
@@ -297,7 +103,7 @@ static struct sch5627_data *sch5627_update_device(struct device *dev)
 
 	/* Trigger a Vbat voltage measurement every 5 minutes */
 	if (time_after(jiffies, data->last_battery + 300 * HZ)) {
-		sch5627_write_virtual_reg(data, SCH5627_REG_CTRL,
+		sch56xx_write_virtual_reg(data->addr, SCH5627_REG_CTRL,
 					  data->control | 0x10);
 		data->last_battery = jiffies;
 	}
@@ -305,7 +111,7 @@ static struct sch5627_data *sch5627_update_device(struct device *dev)
 	/* Cache the values for 1 second */
 	if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
 		for (i = 0; i < SCH5627_NO_TEMPS; i++) {
-			val = sch5627_read_virtual_reg12(data,
+			val = sch56xx_read_virtual_reg12(data->addr,
 				SCH5627_REG_TEMP_MSB[i],
 				SCH5627_REG_TEMP_LSN[i],
 				SCH5627_REG_TEMP_HIGH_NIBBLE[i]);
@@ -317,7 +123,7 @@ static struct sch5627_data *sch5627_update_device(struct device *dev)
 		}
 
 		for (i = 0; i < SCH5627_NO_FANS; i++) {
-			val = sch5627_read_virtual_reg16(data,
+			val = sch56xx_read_virtual_reg16(data->addr,
 							 SCH5627_REG_FAN[i]);
 			if (unlikely(val < 0)) {
 				ret = ERR_PTR(val);
@@ -327,7 +133,7 @@ static struct sch5627_data *sch5627_update_device(struct device *dev)
 		}
 
 		for (i = 0; i < SCH5627_NO_IN; i++) {
-			val = sch5627_read_virtual_reg12(data,
+			val = sch56xx_read_virtual_reg12(data->addr,
 				SCH5627_REG_IN_MSB[i],
 				SCH5627_REG_IN_LSN[i],
 				SCH5627_REG_IN_HIGH_NIBBLE[i]);
@@ -355,18 +161,21 @@ static int __devinit sch5627_read_limits(struct sch5627_data *data)
 		 * Note what SMSC calls ABS, is what lm_sensors calls max
 		 * (aka high), and HIGH is what lm_sensors calls crit.
 		 */
-		val = sch5627_read_virtual_reg(data, SCH5627_REG_TEMP_ABS[i]);
+		val = sch56xx_read_virtual_reg(data->addr,
+					       SCH5627_REG_TEMP_ABS[i]);
 		if (val < 0)
 			return val;
 		data->temp_max[i] = val;
 
-		val = sch5627_read_virtual_reg(data, SCH5627_REG_TEMP_HIGH[i]);
+		val = sch56xx_read_virtual_reg(data->addr,
+					       SCH5627_REG_TEMP_HIGH[i]);
 		if (val < 0)
 			return val;
 		data->temp_crit[i] = val;
 	}
 	for (i = 0; i < SCH5627_NO_FANS; i++) {
-		val = sch5627_read_virtual_reg16(data, SCH5627_REG_FAN_MIN[i]);
+		val = sch56xx_read_virtual_reg16(data->addr,
+						 SCH5627_REG_FAN_MIN[i]);
 		if (val < 0)
 			return val;
 		data->fan_min[i] = val;
@@ -667,7 +476,7 @@ static int __devinit sch5627_probe(struct platform_device *pdev)
 	mutex_init(&data->update_lock);
 	platform_set_drvdata(pdev, data);
 
-	val = sch5627_read_virtual_reg(data, SCH5627_REG_HWMON_ID);
+	val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_HWMON_ID);
 	if (val < 0) {
 		err = val;
 		goto error;
@@ -679,7 +488,7 @@ static int __devinit sch5627_probe(struct platform_device *pdev)
 		goto error;
 	}
 
-	val = sch5627_read_virtual_reg(data, SCH5627_REG_COMPANY_ID);
+	val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_COMPANY_ID);
 	if (val < 0) {
 		err = val;
 		goto error;
@@ -691,7 +500,7 @@ static int __devinit sch5627_probe(struct platform_device *pdev)
 		goto error;
 	}
 
-	val = sch5627_read_virtual_reg(data, SCH5627_REG_PRIMARY_ID);
+	val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_PRIMARY_ID);
 	if (val < 0) {
 		err = val;
 		goto error;
@@ -703,25 +512,28 @@ static int __devinit sch5627_probe(struct platform_device *pdev)
 		goto error;
 	}
 
-	build_code = sch5627_read_virtual_reg(data, SCH5627_REG_BUILD_CODE);
+	build_code = sch56xx_read_virtual_reg(data->addr,
+					      SCH5627_REG_BUILD_CODE);
 	if (build_code < 0) {
 		err = build_code;
 		goto error;
 	}
 
-	build_id = sch5627_read_virtual_reg16(data, SCH5627_REG_BUILD_ID);
+	build_id = sch56xx_read_virtual_reg16(data->addr,
+					      SCH5627_REG_BUILD_ID);
 	if (build_id < 0) {
 		err = build_id;
 		goto error;
 	}
 
-	hwmon_rev = sch5627_read_virtual_reg(data, SCH5627_REG_HWMON_REV);
+	hwmon_rev = sch56xx_read_virtual_reg(data->addr,
+					     SCH5627_REG_HWMON_REV);
 	if (hwmon_rev < 0) {
 		err = hwmon_rev;
 		goto error;
 	}
 
-	val = sch5627_read_virtual_reg(data, SCH5627_REG_CTRL);
+	val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_CTRL);
 	if (val < 0) {
 		err = val;
 		goto error;
@@ -734,7 +546,7 @@ static int __devinit sch5627_probe(struct platform_device *pdev)
 	}
 	/* Trigger a Vbat voltage measurement, so that we get a valid reading
 	   the first time we read Vbat */
-	sch5627_write_virtual_reg(data, SCH5627_REG_CTRL,
+	sch56xx_write_virtual_reg(data->addr, SCH5627_REG_CTRL,
 				  data->control | 0x10);
 	data->last_battery = jiffies;
 
@@ -746,6 +558,7 @@ static int __devinit sch5627_probe(struct platform_device *pdev)
 	if (err)
 		goto error;
 
+	pr_info("found %s chip at %#hx\n", DEVNAME, data->addr);
 	pr_info("firmware build: code 0x%02X, id 0x%04X, hwmon: rev 0x%02X\n",
 		build_code, build_id, hwmon_rev);
 
@@ -768,85 +581,6 @@ error:
 	return err;
 }
 
-static int __init sch5627_find(int sioaddr, unsigned short *address)
-{
-	u8 devid;
-	int err = superio_enter(sioaddr);
-	if (err)
-		return err;
-
-	devid = superio_inb(sioaddr, SIO_REG_DEVID);
-	if (devid != SIO_SCH5627_ID) {
-		pr_debug("Unsupported device id: 0x%02x\n",
-			 (unsigned int)devid);
-		err = -ENODEV;
-		goto exit;
-	}
-
-	superio_select(sioaddr, SIO_SCH5627_EM_LD);
-
-	if (!(superio_inb(sioaddr, SIO_REG_ENABLE) & 0x01)) {
-		pr_warn("Device not activated\n");
-		err = -ENODEV;
-		goto exit;
-	}
-
-	/*
-	 * Warning the order of the low / high byte is the other way around
-	 * as on most other superio devices!!
-	 */
-	*address = superio_inb(sioaddr, SIO_REG_ADDR) |
-		   superio_inb(sioaddr, SIO_REG_ADDR + 1) << 8;
-	if (*address == 0) {
-		pr_warn("Base address not set\n");
-		err = -ENODEV;
-		goto exit;
-	}
-
-	pr_info("Found %s chip at %#hx\n", DEVNAME, *address);
-exit:
-	superio_exit(sioaddr);
-	return err;
-}
-
-static int __init sch5627_device_add(unsigned short address)
-{
-	struct resource res = {
-		.start	= address,
-		.end	= address + REGION_LENGTH - 1,
-		.flags	= IORESOURCE_IO,
-	};
-	int err;
-
-	sch5627_pdev = platform_device_alloc(DRVNAME, address);
-	if (!sch5627_pdev)
-		return -ENOMEM;
-
-	res.name = sch5627_pdev->name;
-	err = acpi_check_resource_conflict(&res);
-	if (err)
-		goto exit_device_put;
-
-	err = platform_device_add_resources(sch5627_pdev, &res, 1);
-	if (err) {
-		pr_err("Device resource addition failed\n");
-		goto exit_device_put;
-	}
-
-	err = platform_device_add(sch5627_pdev);
-	if (err) {
-		pr_err("Device addition failed\n");
-		goto exit_device_put;
-	}
-
-	return 0;
-
-exit_device_put:
-	platform_device_put(sch5627_pdev);
-
-	return err;
-}
-
 static struct platform_driver sch5627_driver = {
 	.driver = {
 		.owner	= THIS_MODULE,
@@ -858,31 +592,11 @@ static struct platform_driver sch5627_driver = {
 
 static int __init sch5627_init(void)
 {
-	int err = -ENODEV;
-	unsigned short address;
-
-	if (sch5627_find(0x4e, &address) && sch5627_find(0x2e, &address))
-		goto exit;
-
-	err = platform_driver_register(&sch5627_driver);
-	if (err)
-		goto exit;
-
-	err = sch5627_device_add(address);
-	if (err)
-		goto exit_driver;
-
-	return 0;
-
-exit_driver:
-	platform_driver_unregister(&sch5627_driver);
-exit:
-	return err;
+	return platform_driver_register(&sch5627_driver);
 }
 
 static void __exit sch5627_exit(void)
 {
-	platform_device_unregister(sch5627_pdev);
 	platform_driver_unregister(&sch5627_driver);
 }