hwmon: sparx5: Add Sparx5 SoC temperature driver

This patch adds a temperature sensor driver to the Sparx5 SoC.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200618135951.25441-4-lars.povlsen@microchip.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

1 files changed, 168 insertions, 0 deletions

diff --git a/drivers/hwmon/sparx5-temp.c b/drivers/hwmon/sparx5-temp.c
new file mode 100644
index 000000000000..7d7a060259a8
--- /dev/null
+++ b/drivers/hwmon/sparx5-temp.c
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* Sparx5 SoC temperature sensor driver
+ *
+ * Copyright (C) 2020 Lars Povlsen <lars.povlsen@microchip.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/hwmon.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#define TEMP_CTRL		0
+#define TEMP_CFG		4
+#define  TEMP_CFG_CYCLES	GENMASK(24, 15)
+#define  TEMP_CFG_ENA		BIT(0)
+#define TEMP_STAT		8
+#define  TEMP_STAT_VALID	BIT(12)
+#define  TEMP_STAT_TEMP		GENMASK(11, 0)
+
+struct s5_hwmon {
+	void __iomem *base;
+	struct clk *clk;
+};
+
+static void s5_temp_clk_disable(void *data)
+{
+	struct clk *clk = data;
+
+	clk_disable_unprepare(clk);
+}
+
+static void s5_temp_enable(struct s5_hwmon *hwmon)
+{
+	u32 val = readl(hwmon->base + TEMP_CFG);
+	u32 clk = clk_get_rate(hwmon->clk) / USEC_PER_SEC;
+
+	val &= ~TEMP_CFG_CYCLES;
+	val |= FIELD_PREP(TEMP_CFG_CYCLES, clk);
+	val |= TEMP_CFG_ENA;
+
+	writel(val, hwmon->base + TEMP_CFG);
+}
+
+static int s5_read(struct device *dev, enum hwmon_sensor_types type,
+		   u32 attr, int channel, long *temp)
+{
+	struct s5_hwmon *hwmon = dev_get_drvdata(dev);
+	int rc = 0, value;
+	u32 stat;
+
+	switch (attr) {
+	case hwmon_temp_input:
+		stat = readl_relaxed(hwmon->base + TEMP_STAT);
+		if (!(stat & TEMP_STAT_VALID))
+			return -EIO;
+		value = stat & TEMP_STAT_TEMP;
+		/*
+		 * From register documentation:
+		 * Temp(C) = TEMP_SENSOR_STAT.TEMP / 4096 * 352.2 - 109.4
+		 */
+		value = DIV_ROUND_CLOSEST(value * 3522, 4096) - 1094;
+		/*
+		 * Scale down by 10 from above and multiply by 1000 to
+		 * have millidegrees as specified by the hwmon sysfs
+		 * interface.
+		 */
+		value *= 100;
+		*temp = value;
+		break;
+	default:
+		rc = -EOPNOTSUPP;
+		break;
+	}
+
+	return rc;
+}
+
+static umode_t s5_is_visible(const void *_data, enum hwmon_sensor_types type,
+			     u32 attr, int channel)
+{
+	if (type != hwmon_temp)
+		return 0;
+
+	switch (attr) {
+	case hwmon_temp_input:
+		return 0444;
+	default:
+		return 0;
+	}
+}
+
+static const struct hwmon_channel_info *s5_info[] = {
+	HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ),
+	HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT),
+	NULL
+};
+
+static const struct hwmon_ops s5_hwmon_ops = {
+	.is_visible = s5_is_visible,
+	.read = s5_read,
+};
+
+static const struct hwmon_chip_info s5_chip_info = {
+	.ops = &s5_hwmon_ops,
+	.info = s5_info,
+};
+
+static int s5_temp_probe(struct platform_device *pdev)
+{
+	struct device *hwmon_dev;
+	struct s5_hwmon *hwmon;
+	int ret;
+
+	hwmon = devm_kzalloc(&pdev->dev, sizeof(*hwmon), GFP_KERNEL);
+	if (!hwmon)
+		return -ENOMEM;
+
+	hwmon->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(hwmon->base))
+		return PTR_ERR(hwmon->base);
+
+	hwmon->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(hwmon->clk))
+		return PTR_ERR(hwmon->clk);
+
+	ret = clk_prepare_enable(hwmon->clk);
+	if (ret)
+		return ret;
+
+	ret = devm_add_action_or_reset(&pdev->dev, s5_temp_clk_disable,
+				       hwmon->clk);
+	if (ret)
+		return ret;
+
+	s5_temp_enable(hwmon);
+
+	hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev,
+							 "s5_temp",
+							 hwmon,
+							 &s5_chip_info,
+							 NULL);
+
+	return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+const struct of_device_id s5_temp_match[] = {
+	{ .compatible = "microchip,sparx5-temp" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, s5_temp_match);
+
+static struct platform_driver s5_temp_driver = {
+	.probe = s5_temp_probe,
+	.driver = {
+		.name = "sparx5-temp",
+		.of_match_table = s5_temp_match,
+	},
+};
+
+module_platform_driver(s5_temp_driver);
+
+MODULE_AUTHOR("Lars Povlsen <lars.povlsen@microchip.com>");
+MODULE_DESCRIPTION("Sparx5 SoC temperature sensor driver");
+MODULE_LICENSE("GPL");