[PATCH] I2C: Separate non-i2c hwmon drivers from i2c-core (5/9)

Call the ISA chip drivers detection function directly instead of relying
on i2c_detect. The net effect is that address lists won't be handled
anymore, but they were mostly useless in the ISA case anyway (pc87360,
smsc47m1, smsc47b397 had already dropped them).

We don't need to handle multiple devices, all we may need is a way to
force a given address instead of the original one (some drivers already
do: sis5595, via686a, w83627hf), and, for drivers supporting multiple
chips, a way to force one given kind. All this may be added later on
demand, but I actually don't think there will be much demand.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 8 insertions, 33 deletions

diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c
index e6fc43a8ba47..cd3732c36671 100644
--- a/drivers/hwmon/via686a.c
+++ b/drivers/hwmon/via686a.c
@@ -50,14 +50,10 @@ module_param(force_addr, ushort, 0);
 MODULE_PARM_DESC(force_addr,
 		 "Initialize the base address of the sensors");
 
-/* Addresses to scan.
+/* Device address
    Note that we can't determine the ISA address until we have initialized
    our module */
-static unsigned short normal_i2c[] = { I2C_CLIENT_END };
-static unsigned int normal_isa[] = { 0x0000, I2C_CLIENT_ISA_END };
-
-/* Insmod parameters */
-SENSORS_INSMOD_1(via686a);
+static unsigned short address;
 
 /*
    The Via 686a southbridge has a LM78-like chip integrated on the same IC.
@@ -319,8 +315,7 @@ struct via686a_data {
 
 static struct pci_dev *s_bridge;	/* pointer to the (only) via686a */
 
-static int via686a_attach_adapter(struct i2c_adapter *adapter);
-static int via686a_detect(struct i2c_adapter *adapter, int address, int kind);
+static int via686a_detect(struct i2c_adapter *adapter);
 static int via686a_detach_client(struct i2c_client *client);
 
 static inline int via686a_read_value(struct i2c_client *client, u8 reg)
@@ -580,22 +575,13 @@ static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
 static struct i2c_driver via686a_driver = {
 	.owner		= THIS_MODULE,
 	.name		= "via686a",
-	.id		= I2C_DRIVERID_VIA686A,
-	.flags		= I2C_DF_NOTIFY,
-	.attach_adapter	= via686a_attach_adapter,
+	.attach_adapter	= via686a_detect,
 	.detach_client	= via686a_detach_client,
 };
 
 
 /* This is called when the module is loaded */
-static int via686a_attach_adapter(struct i2c_adapter *adapter)
-{
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_detect(adapter, &addr_data, via686a_detect);
-}
-
-static int via686a_detect(struct i2c_adapter *adapter, int address, int kind)
+static int via686a_detect(struct i2c_adapter *adapter)
 {
 	struct i2c_client *new_client;
 	struct via686a_data *data;
@@ -603,13 +589,6 @@ static int via686a_detect(struct i2c_adapter *adapter, int address, int kind)
 	const char client_name[] = "via686a";
 	u16 val;
 
-	/* Make sure we are probing the ISA bus!!  */
-	if (!i2c_is_isa_adapter(adapter)) {
-		dev_err(&adapter->dev,
-		"via686a_detect called for an I2C bus adapter?!?\n");
-		return 0;
-	}
-
 	/* 8231 requires multiple of 256, we enforce that on 686 as well */
 	if (force_addr)
 		address = force_addr & 0xFF00;
@@ -825,26 +804,22 @@ static int __devinit via686a_pci_probe(struct pci_dev *dev,
 				       const struct pci_device_id *id)
 {
 	u16 val;
-	int addr = 0;
 
 	if (PCIBIOS_SUCCESSFUL !=
 	    pci_read_config_word(dev, VIA686A_BASE_REG, &val))
 		return -ENODEV;
 
-	addr = val & ~(VIA686A_EXTENT - 1);
-	if (addr == 0 && force_addr == 0) {
+	address = val & ~(VIA686A_EXTENT - 1);
+	if (address == 0 && force_addr == 0) {
 		dev_err(&dev->dev, "base address not set - upgrade BIOS "
 			"or use force_addr=0xaddr\n");
 		return -ENODEV;
 	}
-	if (force_addr)
-		addr = force_addr;	/* so detect will get called */
 
-	if (!addr) {
+	if (!address) {
 		dev_err(&dev->dev, "No Via 686A sensors found.\n");
 		return -ENODEV;
 	}
-	normal_isa[0] = addr;
 
 	s_bridge = pci_dev_get(dev);
 	if (i2c_isa_add_driver(&via686a_driver)) {