i2c-algo-pca: Extend for future drivers

The separation between algorithm and adapter was unsharp at places. This was
partly hidden by the fact, that the ISA-driver allowed just one instance and
had all private data in static variables. This patch makes neccessary
preparations to add a platform driver on top of the algorithm, while still
supporting ISA. Note: Due to lack of hardware, the ISA-driver could not be
tested except that it builds.

Concerning the core struct i2c_algo_pca_data:

- A private data field was added, all hardware dependant data may go here.
  Similar to other algorithms, now a pointer to this data is passed to the
  adapter's functions. In order to make as less changes as possible to the
  ISA-driver, it leaves the private data empty and still only uses its static
  variables.

- A "reset_chip" function pointer was added; such a functionality must come
  from the adapter, not the algorithm.

- use a variable "i2c_clock" instead of a function pointer "get_clock",
  allowing for write access to a default in case a wrong value was supplied.

In the algorithm-file:

- move "i2c-pca-algo.h" into "linux/i2c-algo-pca.h"
- now using per_instance timeout values (i2c_adap->timeout)
- error messages specify the device, not only the driver name
- restructure initialization to easily support "i2c_add_numbered_adapter"
- drop "retries" and "own" (i2c address) as they were unused

(The state-machine for I2C-communication was not touched.)

In the ISA-driver:

- adapt to new algorithm

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

1 files changed, 0 insertions, 26 deletions

diff --git a/drivers/i2c/algos/i2c-algo-pca.h b/drivers/i2c/algos/i2c-algo-pca.h
deleted file mode 100644
index 2fee07e05211..000000000000
--- a/drivers/i2c/algos/i2c-algo-pca.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef I2C_PCA9564_H
-#define I2C_PCA9564_H 1
-
-#define I2C_PCA_STA		0x00 /* STATUS  Read Only  */
-#define I2C_PCA_TO		0x00 /* TIMEOUT Write Only */
-#define I2C_PCA_DAT		0x01 /* DATA    Read/Write */
-#define I2C_PCA_ADR		0x02 /* OWN ADR Read/Write */
-#define I2C_PCA_CON		0x03 /* CONTROL Read/Write */
-
-#define I2C_PCA_CON_AA		0x80 /* Assert Acknowledge */
-#define I2C_PCA_CON_ENSIO	0x40 /* Enable */
-#define I2C_PCA_CON_STA		0x20 /* Start */
-#define I2C_PCA_CON_STO		0x10 /* Stop */
-#define I2C_PCA_CON_SI		0x08 /* Serial Interrupt */
-#define I2C_PCA_CON_CR		0x07 /* Clock Rate (MASK) */
-
-#define I2C_PCA_CON_330kHz	0x00
-#define I2C_PCA_CON_288kHz	0x01
-#define I2C_PCA_CON_217kHz	0x02
-#define I2C_PCA_CON_146kHz	0x03
-#define I2C_PCA_CON_88kHz	0x04
-#define I2C_PCA_CON_59kHz	0x05
-#define I2C_PCA_CON_44kHz	0x06
-#define I2C_PCA_CON_36kHz	0x07
-
-#endif /* I2C_PCA9564_H */