diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2015-04-15 03:10:45 +0200 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2015-04-15 03:10:45 +0200 |
commit | c3a416a669eb83cfa9ccb52db030e72d654bd105 (patch) | |
tree | 518d00dc803fbb7d3772fc26a78b6bf3b797baf3 /drivers/i2c/busses/i2c-bcm-iproc.c | |
parent | Merge tag 'vfio-v4.1-rc1' of git://github.com/awilliam/linux-vfio (diff) | |
parent | i2c: xlp9xx: Driver for Netlogic XLP9XX/5XX I2C controller (diff) | |
download | linux-c3a416a669eb83cfa9ccb52db030e72d654bd105.tar.xz linux-c3a416a669eb83cfa9ccb52db030e72d654bd105.zip |
Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"Most notable:
- introducing the i2c_quirk infrastructure. Now, flaws of I2C
controllers can be described and the core will check if the flaws
collide with the messages to be sent
- wait_for_completion return type cleanup series
- new drivers for Digicolor, Netlogic XLP, Ingenic JZ4780
- updates to the I2C slave framework which include API changes. Its
only user was updated, too. Documentation was finally added
- changed dynamic bus numbering for the DT case. This could change
bus numbers for users. However, it fixes a collision where dynamic
and static busses request the same id.
- driver bugfixes, cleanups"
* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (52 commits)
i2c: xlp9xx: Driver for Netlogic XLP9XX/5XX I2C controller
of: Add vendor prefix 'netlogic'
i2c: davinci: use ICPFUNC to toggle I2C as gpio for bus recovery
i2c: davinci: use bus recovery infrastructure
i2c: change input parameter to i2c_adapter for prepare/unprepare_recovery
i2c: i2c-mux-gpio: remove error messages for probe deferrals
i2c: jz4780: Add i2c bus controller driver for Ingenic JZ4780
i2c: dln2: set the device tree node of the adapter
i2c: davinci: fixup wait_for_completion_timeout handling
i2c: mpc: Fix ISR return value
i2c: slave-eeprom: add more info when to increase the pointer
i2c: slave: add documentation for i2c-slave-eeprom
Documentation: i2c: describe the new slave mode
i2c: slave: rework the slave API
i2c: add support for the Digicolor I2C controller
i2c: busses with dynamic ids should start after fixed ids for DT
of: base: add function to get highest id of an alias stem
i2c: designware: Suppress error message if platform_get_irq() < 0
i2c: mpc: assign the correct prescaler from SVR
i2c: img-scb: fixup of wait_for_completion_timeout return handling
...
Diffstat (limited to 'drivers/i2c/busses/i2c-bcm-iproc.c')
-rw-r--r-- | drivers/i2c/busses/i2c-bcm-iproc.c | 15 |
1 files changed, 7 insertions, 8 deletions
diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c index d3c89157b337..f9f2c2082151 100644 --- a/drivers/i2c/busses/i2c-bcm-iproc.c +++ b/drivers/i2c/busses/i2c-bcm-iproc.c @@ -160,14 +160,6 @@ static int bcm_iproc_i2c_xfer_single_msg(struct bcm_iproc_i2c_dev *iproc_i2c, u32 val; unsigned long time_left = msecs_to_jiffies(I2C_TIMEOUT_MESC); - /* need to reserve one byte in the FIFO for the slave address */ - if (msg->len > M_TX_RX_FIFO_SIZE - 1) { - dev_err(iproc_i2c->device, - "only support data length up to %u bytes\n", - M_TX_RX_FIFO_SIZE - 1); - return -EOPNOTSUPP; - } - /* check if bus is busy */ if (!!(readl(iproc_i2c->base + M_CMD_OFFSET) & BIT(M_CMD_START_BUSY_SHIFT))) { @@ -287,6 +279,12 @@ static const struct i2c_algorithm bcm_iproc_algo = { .functionality = bcm_iproc_i2c_functionality, }; +static struct i2c_adapter_quirks bcm_iproc_i2c_quirks = { + /* need to reserve one byte in the FIFO for the slave address */ + .max_read_len = M_TX_RX_FIFO_SIZE - 1, + .max_write_len = M_TX_RX_FIFO_SIZE - 1, +}; + static int bcm_iproc_i2c_cfg_speed(struct bcm_iproc_i2c_dev *iproc_i2c) { unsigned int bus_speed; @@ -413,6 +411,7 @@ static int bcm_iproc_i2c_probe(struct platform_device *pdev) i2c_set_adapdata(adap, iproc_i2c); strlcpy(adap->name, "Broadcom iProc I2C adapter", sizeof(adap->name)); adap->algo = &bcm_iproc_algo; + adap->quirks = &bcm_iproc_i2c_quirks; adap->dev.parent = &pdev->dev; adap->dev.of_node = pdev->dev.of_node; |