diff options
| author | Jarkko Nikula <jarkko.nikula@linux.intel.com> | 2017-08-23 15:46:12 +0200 |
|---|---|---|
| committer | Wolfram Sang <wsa@the-dreams.de> | 2017-11-27 18:30:13 +0100 |
| commit | 43df43e6ba139e6cd77ea31ca27efc67ea2df44b (patch) | |
| tree | 75816aa58ad862e6ed2a75d2bff55b21d0afd8d4 /drivers/i2c/busses/i2c-designware-slave.c | |
| parent | Linux 4.15-rc1 (diff) | |
| download | linux-43df43e6ba139e6cd77ea31ca27efc67ea2df44b.tar.xz linux-43df43e6ba139e6cd77ea31ca27efc67ea2df44b.zip | |
i2c: designware: Don't set SCL timings and speed mode when in slave mode
According to data sheet SCL timing parameters and DW_IC_CON SPEED mode
bits are not used when operating in slave mode.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Luis Oliveira <lolivei@synopsys.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Diffstat (limited to 'drivers/i2c/busses/i2c-designware-slave.c')
| -rw-r--r-- | drivers/i2c/busses/i2c-designware-slave.c | 64 |
1 files changed, 0 insertions, 64 deletions
diff --git a/drivers/i2c/busses/i2c-designware-slave.c b/drivers/i2c/busses/i2c-designware-slave.c index ea9578ab19a1..d42558d1b002 100644 --- a/drivers/i2c/busses/i2c-designware-slave.c +++ b/drivers/i2c/busses/i2c-designware-slave.c @@ -51,9 +51,7 @@ static void i2c_dw_configure_fifo_slave(struct dw_i2c_dev *dev) */ static int i2c_dw_init_slave(struct dw_i2c_dev *dev) { - u32 sda_falling_time, scl_falling_time; u32 reg, comp_param1; - u32 hcnt, lcnt; int ret; ret = i2c_dw_acquire_lock(dev); @@ -79,68 +77,6 @@ static int i2c_dw_init_slave(struct dw_i2c_dev *dev) /* Disable the adapter. */ __i2c_dw_enable_and_wait(dev, false); - /* Set standard and fast speed deviders for high/low periods. */ - sda_falling_time = dev->sda_falling_time ?: 300; /* ns */ - scl_falling_time = dev->scl_falling_time ?: 300; /* ns */ - - /* Set SCL timing parameters for standard-mode. */ - if (dev->ss_hcnt && dev->ss_lcnt) { - hcnt = dev->ss_hcnt; - lcnt = dev->ss_lcnt; - } else { - hcnt = i2c_dw_scl_hcnt(i2c_dw_clk_rate(dev), - 4000, /* tHD;STA = tHIGH = 4.0 us */ - sda_falling_time, - 0, /* 0: DW default, 1: Ideal */ - 0); /* No offset */ - lcnt = i2c_dw_scl_lcnt(i2c_dw_clk_rate(dev), - 4700, /* tLOW = 4.7 us */ - scl_falling_time, - 0); /* No offset */ - } - dw_writel(dev, hcnt, DW_IC_SS_SCL_HCNT); - dw_writel(dev, lcnt, DW_IC_SS_SCL_LCNT); - dev_dbg(dev->dev, "Standard-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt); - - /* Set SCL timing parameters for fast-mode or fast-mode plus. */ - if ((dev->clk_freq == 1000000) && dev->fp_hcnt && dev->fp_lcnt) { - hcnt = dev->fp_hcnt; - lcnt = dev->fp_lcnt; - } else if (dev->fs_hcnt && dev->fs_lcnt) { - hcnt = dev->fs_hcnt; - lcnt = dev->fs_lcnt; - } else { - hcnt = i2c_dw_scl_hcnt(i2c_dw_clk_rate(dev), - 600, /* tHD;STA = tHIGH = 0.6 us */ - sda_falling_time, - 0, /* 0: DW default, 1: Ideal */ - 0); /* No offset */ - lcnt = i2c_dw_scl_lcnt(i2c_dw_clk_rate(dev), - 1300, /* tLOW = 1.3 us */ - scl_falling_time, - 0); /* No offset */ - } - dw_writel(dev, hcnt, DW_IC_FS_SCL_HCNT); - dw_writel(dev, lcnt, DW_IC_FS_SCL_LCNT); - dev_dbg(dev->dev, "Fast-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt); - - if ((dev->slave_cfg & DW_IC_CON_SPEED_MASK) == - DW_IC_CON_SPEED_HIGH) { - if ((comp_param1 & DW_IC_COMP_PARAM_1_SPEED_MODE_MASK) - != DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH) { - dev_err(dev->dev, "High Speed not supported!\n"); - dev->slave_cfg &= ~DW_IC_CON_SPEED_MASK; - dev->slave_cfg |= DW_IC_CON_SPEED_FAST; - } else if (dev->hs_hcnt && dev->hs_lcnt) { - hcnt = dev->hs_hcnt; - lcnt = dev->hs_lcnt; - dw_writel(dev, hcnt, DW_IC_HS_SCL_HCNT); - dw_writel(dev, lcnt, DW_IC_HS_SCL_LCNT); - dev_dbg(dev->dev, "HighSpeed-mode HCNT:LCNT = %d:%d\n", - hcnt, lcnt); - } - } - /* Configure SDA Hold Time if required. */ reg = dw_readl(dev, DW_IC_COMP_VERSION); if (reg >= DW_IC_SDA_HOLD_MIN_VERS) { |