i2c: i801: convert to use common P2SB accessor

Since we have a common P2SB accessor in tree we may use it instead of
open coded variants.

Replace custom code by p2sb_bar() call.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Henning Schild <henning.schild@siemens.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>

1 files changed, 9 insertions, 30 deletions

diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index ff706349bdfb..f7a0bb372e8e 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -111,6 +111,7 @@
 #include <linux/err.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/itco_wdt.h>
+#include <linux/platform_data/x86/p2sb.h>
 #include <linux/pm_runtime.h>
 #include <linux/mutex.h>
 
@@ -140,7 +141,6 @@
 #define TCOBASE		0x050
 #define TCOCTL		0x054
 
-#define SBREG_BAR		0x10
 #define SBREG_SMBCTRL		0xc6000c
 #define SBREG_SMBCTRL_DNV	0xcf000c
 
@@ -1482,45 +1482,24 @@ i801_add_tco_spt(struct i801_priv *priv, struct pci_dev *pci_dev,
 		.version = 4,
 	};
 	struct resource *res;
-	unsigned int devfn;
-	u64 base64_addr;
-	u32 base_addr;
-	u8 hidden;
+	int ret;
 
 	/*
 	 * We must access the NO_REBOOT bit over the Primary to Sideband
-	 * bridge (P2SB). The BIOS prevents the P2SB device from being
-	 * enumerated by the PCI subsystem, so we need to unhide/hide it
-	 * to lookup the P2SB BAR.
+	 * (P2SB) bridge.
 	 */
-	pci_lock_rescan_remove();
-
-	devfn = PCI_DEVFN(PCI_SLOT(pci_dev->devfn), 1);
-
-	/* Unhide the P2SB device, if it is hidden */
-	pci_bus_read_config_byte(pci_dev->bus, devfn, 0xe1, &hidden);
-	if (hidden)
-		pci_bus_write_config_byte(pci_dev->bus, devfn, 0xe1, 0x0);
-
-	pci_bus_read_config_dword(pci_dev->bus, devfn, SBREG_BAR, &base_addr);
-	base64_addr = base_addr & 0xfffffff0;
-
-	pci_bus_read_config_dword(pci_dev->bus, devfn, SBREG_BAR + 0x4, &base_addr);
-	base64_addr |= (u64)base_addr << 32;
-
-	/* Hide the P2SB device, if it was hidden before */
-	if (hidden)
-		pci_bus_write_config_byte(pci_dev->bus, devfn, 0xe1, hidden);
-	pci_unlock_rescan_remove();
 
 	res = &tco_res[1];
+	ret = p2sb_bar(pci_dev->bus, 0, res);
+	if (ret)
+		return ERR_PTR(ret);
+
 	if (pci_dev->device == PCI_DEVICE_ID_INTEL_DNV_SMBUS)
-		res->start = (resource_size_t)base64_addr + SBREG_SMBCTRL_DNV;
+		res->start += SBREG_SMBCTRL_DNV;
 	else
-		res->start = (resource_size_t)base64_addr + SBREG_SMBCTRL;
+		res->start += SBREG_SMBCTRL;
 
 	res->end = res->start + 3;
-	res->flags = IORESOURCE_MEM;
 
 	return platform_device_register_resndata(&pci_dev->dev, "iTCO_wdt", -1,
 					tco_res, 2, &pldata, sizeof(pldata));