i2c: octeon: Move set-clock and init-lowlevel upward

No functional change, just moving the functions upward in
preparation of improving the recovery.

Signed-off-by: Jan Glauber <jglauber@cavium.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

1 files changed, 63 insertions, 63 deletions

diff --git a/drivers/i2c/busses/i2c-octeon.c b/drivers/i2c/busses/i2c-octeon.c
index c4abf16468ca..f647667a3a47 100644
--- a/drivers/i2c/busses/i2c-octeon.c
+++ b/drivers/i2c/busses/i2c-octeon.c
@@ -214,6 +214,69 @@ static int octeon_i2c_wait(struct octeon_i2c *i2c)
 	return 0;
 }
 
+/* calculate and set clock divisors */
+static void octeon_i2c_set_clock(struct octeon_i2c *i2c)
+{
+	int tclk, thp_base, inc, thp_idx, mdiv_idx, ndiv_idx, foscl, diff;
+	int thp = 0x18, mdiv = 2, ndiv = 0, delta_hz = 1000000;
+
+	for (ndiv_idx = 0; ndiv_idx < 8 && delta_hz != 0; ndiv_idx++) {
+		/*
+		 * An mdiv value of less than 2 seems to not work well
+		 * with ds1337 RTCs, so we constrain it to larger values.
+		 */
+		for (mdiv_idx = 15; mdiv_idx >= 2 && delta_hz != 0; mdiv_idx--) {
+			/*
+			 * For given ndiv and mdiv values check the
+			 * two closest thp values.
+			 */
+			tclk = i2c->twsi_freq * (mdiv_idx + 1) * 10;
+			tclk *= (1 << ndiv_idx);
+			thp_base = (i2c->sys_freq / (tclk * 2)) - 1;
+
+			for (inc = 0; inc <= 1; inc++) {
+				thp_idx = thp_base + inc;
+				if (thp_idx < 5 || thp_idx > 0xff)
+					continue;
+
+				foscl = i2c->sys_freq / (2 * (thp_idx + 1));
+				foscl = foscl / (1 << ndiv_idx);
+				foscl = foscl / (mdiv_idx + 1) / 10;
+				diff = abs(foscl - i2c->twsi_freq);
+				if (diff < delta_hz) {
+					delta_hz = diff;
+					thp = thp_idx;
+					mdiv = mdiv_idx;
+					ndiv = ndiv_idx;
+				}
+			}
+		}
+	}
+	octeon_i2c_write_sw(i2c, SW_TWSI_OP_TWSI_CLK, thp);
+	octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CLKCTL, (mdiv << 3) | ndiv);
+}
+
+static int octeon_i2c_init_lowlevel(struct octeon_i2c *i2c)
+{
+	u8 status;
+	int tries;
+
+	/* disable high level controller, enable bus access */
+	octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB);
+
+	/* reset controller */
+	octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_RST, 0);
+
+	for (tries = 10; tries; tries--) {
+		udelay(1);
+		status = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
+		if (status == STAT_IDLE)
+			return 0;
+	}
+	dev_err(i2c->dev, "%s: TWSI_RST failed! (0x%x)\n", __func__, status);
+	return -EIO;
+}
+
 /**
  * octeon_i2c_start - send START to the bus
  * @i2c: The struct octeon_i2c
@@ -428,69 +491,6 @@ static struct i2c_adapter octeon_i2c_ops = {
 	.algo = &octeon_i2c_algo,
 };
 
-/* calculate and set clock divisors */
-static void octeon_i2c_set_clock(struct octeon_i2c *i2c)
-{
-	int tclk, thp_base, inc, thp_idx, mdiv_idx, ndiv_idx, foscl, diff;
-	int thp = 0x18, mdiv = 2, ndiv = 0, delta_hz = 1000000;
-
-	for (ndiv_idx = 0; ndiv_idx < 8 && delta_hz != 0; ndiv_idx++) {
-		/*
-		 * An mdiv value of less than 2 seems to not work well
-		 * with ds1337 RTCs, so we constrain it to larger values.
-		 */
-		for (mdiv_idx = 15; mdiv_idx >= 2 && delta_hz != 0; mdiv_idx--) {
-			/*
-			 * For given ndiv and mdiv values check the
-			 * two closest thp values.
-			 */
-			tclk = i2c->twsi_freq * (mdiv_idx + 1) * 10;
-			tclk *= (1 << ndiv_idx);
-			thp_base = (i2c->sys_freq / (tclk * 2)) - 1;
-
-			for (inc = 0; inc <= 1; inc++) {
-				thp_idx = thp_base + inc;
-				if (thp_idx < 5 || thp_idx > 0xff)
-					continue;
-
-				foscl = i2c->sys_freq / (2 * (thp_idx + 1));
-				foscl = foscl / (1 << ndiv_idx);
-				foscl = foscl / (mdiv_idx + 1) / 10;
-				diff = abs(foscl - i2c->twsi_freq);
-				if (diff < delta_hz) {
-					delta_hz = diff;
-					thp = thp_idx;
-					mdiv = mdiv_idx;
-					ndiv = ndiv_idx;
-				}
-			}
-		}
-	}
-	octeon_i2c_write_sw(i2c, SW_TWSI_OP_TWSI_CLK, thp);
-	octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CLKCTL, (mdiv << 3) | ndiv);
-}
-
-static int octeon_i2c_init_lowlevel(struct octeon_i2c *i2c)
-{
-	u8 status;
-	int tries;
-
-	/* disable high level controller, enable bus access */
-	octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB);
-
-	/* reset controller */
-	octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_RST, 0);
-
-	for (tries = 10; tries; tries--) {
-		udelay(1);
-		status = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
-		if (status == STAT_IDLE)
-			return 0;
-	}
-	dev_err(i2c->dev, "%s: TWSI_RST failed! (0x%x)\n", __func__, status);
-	return -EIO;
-}
-
 static int octeon_i2c_probe(struct platform_device *pdev)
 {
 	struct device_node *node = pdev->dev.of_node;