i2c: qcom-geni: Fix runtime PM mismatch with child devices

We need to enable runtime PM on this i2c controller before populating
child devices with i2c_add_adapter(). Otherwise, if a child device uses
runtime PM and stays runtime PM enabled we'll get the following warning
at boot.

 Enabling runtime PM for inactive device (a98000.i2c) with active children

[...]

 Call trace:
  pm_runtime_enable+0xd8/0xf8
  geni_i2c_probe+0x440/0x460
  platform_drv_probe+0x74/0xc8
[...]

Let's move the runtime PM enabling and setup to before we add the
adapter, so that this device can respond to runtime PM requests from
children.

Fixes: 37692de5d523 ("i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controller")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

1 files changed, 8 insertions, 7 deletions

diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index 527f55c8c4c7..db075bc0d952 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -571,18 +571,19 @@ static int geni_i2c_probe(struct platform_device *pdev)
 
 	dev_dbg(&pdev->dev, "i2c fifo/se-dma mode. fifo depth:%d\n", tx_depth);
 
-	ret = i2c_add_adapter(&gi2c->adap);
-	if (ret) {
-		dev_err(&pdev->dev, "Error adding i2c adapter %d\n", ret);
-		return ret;
-	}
-
 	gi2c->suspended = 1;
 	pm_runtime_set_suspended(gi2c->se.dev);
 	pm_runtime_set_autosuspend_delay(gi2c->se.dev, I2C_AUTO_SUSPEND_DELAY);
 	pm_runtime_use_autosuspend(gi2c->se.dev);
 	pm_runtime_enable(gi2c->se.dev);
 
+	ret = i2c_add_adapter(&gi2c->adap);
+	if (ret) {
+		dev_err(&pdev->dev, "Error adding i2c adapter %d\n", ret);
+		pm_runtime_disable(gi2c->se.dev);
+		return ret;
+	}
+
 	return 0;
 }
 
@@ -590,8 +591,8 @@ static int geni_i2c_remove(struct platform_device *pdev)
 {
 	struct geni_i2c_dev *gi2c = platform_get_drvdata(pdev);
 
-	pm_runtime_disable(gi2c->se.dev);
 	i2c_del_adapter(&gi2c->adap);
+	pm_runtime_disable(gi2c->se.dev);
 	return 0;
 }