i2c: virtio: add a virtio i2c frontend driver

Add an I2C bus driver for virtio para-virtualization.

The controller can be emulated by the backend driver in
any device model software by following the virtio protocol.

The device specification can be found on
https://lists.oasis-open.org/archives/virtio-comment/202101/msg00008.html.

By following the specification, people may implement different
backend drivers to emulate different controllers according to
their needs.

Co-developed-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

1 files changed, 290 insertions, 0 deletions

diff --git a/drivers/i2c/busses/i2c-virtio.c b/drivers/i2c/busses/i2c-virtio.c
new file mode 100644
index 000000000000..f10a603b13fb
--- /dev/null
+++ b/drivers/i2c/busses/i2c-virtio.c
@@ -0,0 +1,290 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Virtio I2C Bus Driver
+ *
+ * The Virtio I2C Specification:
+ * https://raw.githubusercontent.com/oasis-tcs/virtio-spec/master/virtio-i2c.tex
+ *
+ * Copyright (c) 2021 Intel Corporation. All rights reserved.
+ */
+
+#include <linux/acpi.h>
+#include <linux/completion.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/virtio.h>
+#include <linux/virtio_ids.h>
+#include <linux/virtio_config.h>
+#include <linux/virtio_i2c.h>
+
+/**
+ * struct virtio_i2c - virtio I2C data
+ * @vdev: virtio device for this controller
+ * @completion: completion of virtio I2C message
+ * @adap: I2C adapter for this controller
+ * @vq: the virtio virtqueue for communication
+ */
+struct virtio_i2c {
+	struct virtio_device *vdev;
+	struct completion completion;
+	struct i2c_adapter adap;
+	struct virtqueue *vq;
+};
+
+/**
+ * struct virtio_i2c_req - the virtio I2C request structure
+ * @out_hdr: the OUT header of the virtio I2C message
+ * @buf: the buffer into which data is read, or from which it's written
+ * @in_hdr: the IN header of the virtio I2C message
+ */
+struct virtio_i2c_req {
+	struct virtio_i2c_out_hdr out_hdr	____cacheline_aligned;
+	uint8_t *buf				____cacheline_aligned;
+	struct virtio_i2c_in_hdr in_hdr		____cacheline_aligned;
+};
+
+static void virtio_i2c_msg_done(struct virtqueue *vq)
+{
+	struct virtio_i2c *vi = vq->vdev->priv;
+
+	complete(&vi->completion);
+}
+
+static int virtio_i2c_prepare_reqs(struct virtqueue *vq,
+				   struct virtio_i2c_req *reqs,
+				   struct i2c_msg *msgs, int num)
+{
+	struct scatterlist *sgs[3], out_hdr, msg_buf, in_hdr;
+	int i;
+
+	for (i = 0; i < num; i++) {
+		int outcnt = 0, incnt = 0;
+
+		/*
+		 * We don't support 0 length messages and so filter out
+		 * 0 length transfers by using i2c_adapter_quirks.
+		 */
+		if (!msgs[i].len)
+			break;
+
+		/*
+		 * Only 7-bit mode supported for this moment. For the address
+		 * format, Please check the Virtio I2C Specification.
+		 */
+		reqs[i].out_hdr.addr = cpu_to_le16(msgs[i].addr << 1);
+
+		if (i != num - 1)
+			reqs[i].out_hdr.flags = cpu_to_le32(VIRTIO_I2C_FLAGS_FAIL_NEXT);
+
+		sg_init_one(&out_hdr, &reqs[i].out_hdr, sizeof(reqs[i].out_hdr));
+		sgs[outcnt++] = &out_hdr;
+
+		reqs[i].buf = i2c_get_dma_safe_msg_buf(&msgs[i], 1);
+		if (!reqs[i].buf)
+			break;
+
+		sg_init_one(&msg_buf, reqs[i].buf, msgs[i].len);
+
+		if (msgs[i].flags & I2C_M_RD)
+			sgs[outcnt + incnt++] = &msg_buf;
+		else
+			sgs[outcnt++] = &msg_buf;
+
+		sg_init_one(&in_hdr, &reqs[i].in_hdr, sizeof(reqs[i].in_hdr));
+		sgs[outcnt + incnt++] = &in_hdr;
+
+		if (virtqueue_add_sgs(vq, sgs, outcnt, incnt, &reqs[i], GFP_KERNEL)) {
+			i2c_put_dma_safe_msg_buf(reqs[i].buf, &msgs[i], false);
+			break;
+		}
+	}
+
+	return i;
+}
+
+static int virtio_i2c_complete_reqs(struct virtqueue *vq,
+				    struct virtio_i2c_req *reqs,
+				    struct i2c_msg *msgs, int num,
+				    bool timedout)
+{
+	struct virtio_i2c_req *req;
+	bool failed = timedout;
+	unsigned int len;
+	int i, j = 0;
+
+	for (i = 0; i < num; i++) {
+		/* Detach the ith request from the vq */
+		req = virtqueue_get_buf(vq, &len);
+
+		/*
+		 * Condition req == &reqs[i] should always meet since we have
+		 * total num requests in the vq. reqs[i] can never be NULL here.
+		 */
+		if (!failed && (WARN_ON(req != &reqs[i]) ||
+				req->in_hdr.status != VIRTIO_I2C_MSG_OK))
+			failed = true;
+
+		i2c_put_dma_safe_msg_buf(reqs[i].buf, &msgs[i], !failed);
+
+		if (!failed)
+			j++;
+	}
+
+	return timedout ? -ETIMEDOUT : j;
+}
+
+static int virtio_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+			   int num)
+{
+	struct virtio_i2c *vi = i2c_get_adapdata(adap);
+	struct virtqueue *vq = vi->vq;
+	struct virtio_i2c_req *reqs;
+	unsigned long time_left;
+	int count;
+
+	reqs = kcalloc(num, sizeof(*reqs), GFP_KERNEL);
+	if (!reqs)
+		return -ENOMEM;
+
+	count = virtio_i2c_prepare_reqs(vq, reqs, msgs, num);
+	if (!count)
+		goto err_free;
+
+	/*
+	 * For the case where count < num, i.e. we weren't able to queue all the
+	 * msgs, ideally we should abort right away and return early, but some
+	 * of the messages are already sent to the remote I2C controller and the
+	 * virtqueue will be left in undefined state in that case. We kick the
+	 * remote here to clear the virtqueue, so we can try another set of
+	 * messages later on.
+	 */
+
+	reinit_completion(&vi->completion);
+	virtqueue_kick(vq);
+
+	time_left = wait_for_completion_timeout(&vi->completion, adap->timeout);
+	if (!time_left)
+		dev_err(&adap->dev, "virtio i2c backend timeout.\n");
+
+	count = virtio_i2c_complete_reqs(vq, reqs, msgs, count, !time_left);
+
+err_free:
+	kfree(reqs);
+	return count;
+}
+
+static void virtio_i2c_del_vqs(struct virtio_device *vdev)
+{
+	vdev->config->reset(vdev);
+	vdev->config->del_vqs(vdev);
+}
+
+static int virtio_i2c_setup_vqs(struct virtio_i2c *vi)
+{
+	struct virtio_device *vdev = vi->vdev;
+
+	vi->vq = virtio_find_single_vq(vdev, virtio_i2c_msg_done, "msg");
+	return PTR_ERR_OR_ZERO(vi->vq);
+}
+
+static u32 virtio_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
+}
+
+static struct i2c_algorithm virtio_algorithm = {
+	.master_xfer = virtio_i2c_xfer,
+	.functionality = virtio_i2c_func,
+};
+
+static const struct i2c_adapter_quirks virtio_i2c_quirks = {
+	.flags = I2C_AQ_NO_ZERO_LEN,
+};
+
+static int virtio_i2c_probe(struct virtio_device *vdev)
+{
+	struct virtio_i2c *vi;
+	int ret;
+
+	vi = devm_kzalloc(&vdev->dev, sizeof(*vi), GFP_KERNEL);
+	if (!vi)
+		return -ENOMEM;
+
+	vdev->priv = vi;
+	vi->vdev = vdev;
+
+	init_completion(&vi->completion);
+
+	ret = virtio_i2c_setup_vqs(vi);
+	if (ret)
+		return ret;
+
+	vi->adap.owner = THIS_MODULE;
+	snprintf(vi->adap.name, sizeof(vi->adap.name),
+		 "i2c_virtio at virtio bus %d", vdev->index);
+	vi->adap.algo = &virtio_algorithm;
+	vi->adap.quirks = &virtio_i2c_quirks;
+	vi->adap.dev.parent = &vdev->dev;
+	vi->adap.dev.of_node = vdev->dev.of_node;
+	i2c_set_adapdata(&vi->adap, vi);
+
+	/*
+	 * Setup ACPI node for controlled devices which will be probed through
+	 * ACPI.
+	 */
+	ACPI_COMPANION_SET(&vi->adap.dev, ACPI_COMPANION(vdev->dev.parent));
+
+	ret = i2c_add_adapter(&vi->adap);
+	if (ret)
+		virtio_i2c_del_vqs(vdev);
+
+	return ret;
+}
+
+static void virtio_i2c_remove(struct virtio_device *vdev)
+{
+	struct virtio_i2c *vi = vdev->priv;
+
+	i2c_del_adapter(&vi->adap);
+	virtio_i2c_del_vqs(vdev);
+}
+
+static struct virtio_device_id id_table[] = {
+	{ VIRTIO_ID_I2C_ADAPTER, VIRTIO_DEV_ANY_ID },
+	{}
+};
+MODULE_DEVICE_TABLE(virtio, id_table);
+
+#ifdef CONFIG_PM_SLEEP
+static int virtio_i2c_freeze(struct virtio_device *vdev)
+{
+	virtio_i2c_del_vqs(vdev);
+	return 0;
+}
+
+static int virtio_i2c_restore(struct virtio_device *vdev)
+{
+	return virtio_i2c_setup_vqs(vdev->priv);
+}
+#endif
+
+static struct virtio_driver virtio_i2c_driver = {
+	.id_table	= id_table,
+	.probe		= virtio_i2c_probe,
+	.remove		= virtio_i2c_remove,
+	.driver	= {
+		.name	= "i2c_virtio",
+	},
+#ifdef CONFIG_PM_SLEEP
+	.freeze = virtio_i2c_freeze,
+	.restore = virtio_i2c_restore,
+#endif
+};
+module_virtio_driver(virtio_i2c_driver);
+
+MODULE_AUTHOR("Jie Deng <jie.deng@intel.com>");
+MODULE_AUTHOR("Conghui Chen <conghui.chen@intel.com>");
+MODULE_DESCRIPTION("Virtio i2c bus driver");
+MODULE_LICENSE("GPL");