summaryrefslogtreecommitdiffstats
path: root/drivers/i2c
diff options
context:
space:
mode:
authorGuennadi Liakhovetski <g.liakhovetski@gmx.de>2013-01-17 10:45:57 +0100
committerWolfram Sang <wolfram@the-dreams.de>2013-02-10 19:55:24 +0100
commite789029761503f0cce03e8767a56ae099b88e1bd (patch)
treedae8b0a71c38f79384c2ead8c29ca4f176007efa /drivers/i2c
parenti2c: sh_mobile: eliminate an open-coded "goto" loop (diff)
downloadlinux-e789029761503f0cce03e8767a56ae099b88e1bd.tar.xz
linux-e789029761503f0cce03e8767a56ae099b88e1bd.zip
i2c: sh_mobile: don't send a stop condition by default inside transfers
By default there should be no stop bit on I2C between single messages within transfers. Fix the driver to comply and only send a stop bit at the end of transfers or if I2C_M_STOP is set. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Wolfram Sang <wolfram@the-dreams.de>
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/busses/i2c-sh_mobile.c79
1 files changed, 59 insertions, 20 deletions
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 2767ea8e98a7..debf745c0268 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -38,21 +38,21 @@
/* Transmit operation: */
/* */
/* 0 byte transmit */
-/* BUS: S A8 ACK P */
+/* BUS: S A8 ACK P(*) */
/* IRQ: DTE WAIT */
/* ICIC: */
/* ICCR: 0x94 0x90 */
/* ICDR: A8 */
/* */
/* 1 byte transmit */
-/* BUS: S A8 ACK D8(1) ACK P */
+/* BUS: S A8 ACK D8(1) ACK P(*) */
/* IRQ: DTE WAIT WAIT */
/* ICIC: -DTE */
/* ICCR: 0x94 0x90 */
/* ICDR: A8 D8(1) */
/* */
/* 2 byte transmit */
-/* BUS: S A8 ACK D8(1) ACK D8(2) ACK P */
+/* BUS: S A8 ACK D8(1) ACK D8(2) ACK P(*) */
/* IRQ: DTE WAIT WAIT WAIT */
/* ICIC: -DTE */
/* ICCR: 0x94 0x90 */
@@ -66,20 +66,20 @@
/* 0 byte receive - not supported since slave may hold SDA low */
/* */
/* 1 byte receive [TX] | [RX] */
-/* BUS: S A8 ACK | D8(1) ACK P */
+/* BUS: S A8 ACK | D8(1) ACK P(*) */
/* IRQ: DTE WAIT | WAIT DTE */
/* ICIC: -DTE | +DTE */
/* ICCR: 0x94 0x81 | 0xc0 */
/* ICDR: A8 | D8(1) */
/* */
/* 2 byte receive [TX]| [RX] */
-/* BUS: S A8 ACK | D8(1) ACK D8(2) ACK P */
+/* BUS: S A8 ACK | D8(1) ACK D8(2) ACK P(*) */
/* IRQ: DTE WAIT | WAIT WAIT DTE */
/* ICIC: -DTE | +DTE */
/* ICCR: 0x94 0x81 | 0xc0 */
/* ICDR: A8 | D8(1) D8(2) */
/* */
-/* 3 byte receive [TX] | [RX] */
+/* 3 byte receive [TX] | [RX] (*) */
/* BUS: S A8 ACK | D8(1) ACK D8(2) ACK D8(3) ACK P */
/* IRQ: DTE WAIT | WAIT WAIT WAIT DTE */
/* ICIC: -DTE | +DTE */
@@ -94,7 +94,7 @@
/* SDA ___\___XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXAAAAAAAAA___/ */
/* SCL \_/1\_/2\_/3\_/4\_/5\_/6\_/7\_/8\___/9\_____/ */
/* */
-/* S D7 D6 D5 D4 D3 D2 D1 D0 P */
+/* S D7 D6 D5 D4 D3 D2 D1 D0 P(*) */
/* ___ */
/* WAIT IRQ ________________________________/ \___________ */
/* TACK IRQ ____________________________________/ \_______ */
@@ -103,6 +103,11 @@
/* _______________________________________________ */
/* BUSY __/ \_ */
/* */
+/* (*) The STOP condition is only sent by the master at the end of the last */
+/* I2C message or if the I2C_M_STOP flag is set. Similarly, the BUSY bit is */
+/* only cleared after the STOP condition, so, between messages we have to */
+/* poll for the DTE bit. */
+/* */
enum sh_mobile_i2c_op {
OP_START = 0,
@@ -132,6 +137,7 @@ struct sh_mobile_i2c_data {
struct i2c_msg *msg;
int pos;
int sr;
+ bool send_stop;
};
#define IIC_FLAG_HAS_ICIC67 (1 << 0)
@@ -322,7 +328,7 @@ static unsigned char i2c_op(struct sh_mobile_i2c_data *pd,
break;
case OP_TX_STOP: /* write data and issue a stop afterwards */
iic_wr(pd, ICDR, data);
- iic_wr(pd, ICCR, 0x90);
+ iic_wr(pd, ICCR, pd->send_stop ? 0x90 : 0x94);
break;
case OP_TX_TO_RX: /* select read mode */
iic_wr(pd, ICCR, 0x81);
@@ -469,22 +475,25 @@ static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg)
+static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg,
+ bool do_init)
{
if (usr_msg->len == 0 && (usr_msg->flags & I2C_M_RD)) {
dev_err(pd->dev, "Unsupported zero length i2c read\n");
return -EIO;
}
- /* Initialize channel registers */
- iic_set_clr(pd, ICCR, 0, ICCR_ICE);
+ if (do_init) {
+ /* Initialize channel registers */
+ iic_set_clr(pd, ICCR, 0, ICCR_ICE);
- /* Enable channel and configure rx ack */
- iic_set_clr(pd, ICCR, ICCR_ICE, 0);
+ /* Enable channel and configure rx ack */
+ iic_set_clr(pd, ICCR, ICCR_ICE, 0);
- /* Set the clock */
- iic_wr(pd, ICCL, pd->iccl & 0xff);
- iic_wr(pd, ICCH, pd->icch & 0xff);
+ /* Set the clock */
+ iic_wr(pd, ICCL, pd->iccl & 0xff);
+ iic_wr(pd, ICCH, pd->icch & 0xff);
+ }
pd->msg = usr_msg;
pd->pos = -1;
@@ -495,6 +504,30 @@ static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg)
return 0;
}
+static int poll_dte(struct sh_mobile_i2c_data *pd)
+{
+ int i;
+
+ for (i = 1000; i; i--) {
+ u_int8_t val = iic_rd(pd, ICSR);
+
+ if (val & ICSR_DTE)
+ break;
+
+ if (val & ICSR_TACK)
+ return -EIO;
+
+ udelay(10);
+ }
+
+ if (!i) {
+ dev_warn(pd->dev, "Timeout polling for DTE!\n");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
static int poll_busy(struct sh_mobile_i2c_data *pd)
{
int i;
@@ -539,13 +572,16 @@ static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter,
/* Process all messages */
for (i = 0; i < num; i++) {
+ bool do_start = pd->send_stop || !i;
msg = &msgs[i];
+ pd->send_stop = i == num - 1 || msg->flags & I2C_M_STOP;
- err = start_ch(pd, msg);
+ err = start_ch(pd, msg, do_start);
if (err)
break;
- i2c_op(pd, OP_START, 0);
+ if (do_start)
+ i2c_op(pd, OP_START, 0);
/* The interrupt handler takes care of the rest... */
k = wait_event_timeout(pd->wait,
@@ -557,7 +593,10 @@ static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter,
break;
}
- err = poll_busy(pd);
+ if (pd->send_stop)
+ err = poll_busy(pd);
+ else
+ err = poll_dte(pd);
if (err < 0)
break;
}
@@ -571,7 +610,7 @@ static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter,
static u32 sh_mobile_i2c_func(struct i2c_adapter *adapter)
{
- return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_PROTOCOL_MANGLING;
}
static struct i2c_algorithm sh_mobile_i2c_algorithm = {