summaryrefslogtreecommitdiffstats
path: root/drivers/i2c
diff options
context:
space:
mode:
authorLars-Peter Clausen <lars@metafoo.de>2023-03-17 15:54:41 +0100
committerWolfram Sang <wsa@kernel.org>2023-03-29 21:17:05 +0200
commitba064873ce5d193005e4fac66cdc436587a0dee2 (patch)
tree0d71e34f15205cec138c74e019f756fb40a9eadd /drivers/i2c
parenti2c: cadence: Allow to specify the FIFO depth (diff)
downloadlinux-ba064873ce5d193005e4fac66cdc436587a0dee2.tar.xz
linux-ba064873ce5d193005e4fac66cdc436587a0dee2.zip
i2c: cadence: Detect maximum transfer size
The maximum transfer length is a synthesis configuration parameters of the Cadence I2C IP. Different SoCs might use different values for these parameters. Currently the driver has the maximum transfer length hardcoded to 255. Trying to use the driver with an IP instance that uses smaller values for these will work for short transfers. But longer transfers will fail. The maximum transfer length can easily be detected at runtime since the unused MSBs of the transfer length register are hardwired to 0. Writing 0xff and then reading back the value will give the maximum transfer length. These changes have been tested with 1) The Xilinx MPSoC for which this driver was originally written which has the previous hardcoded settings of 16 and 255. 2) Another instance of the Cadence I2C IP with FIFO depth of 8 and maximum transfer length of 16. Without these changes the latter would fail for I2C transfers longer than 16. With the updated driver both work fine even for longer transfers. Note that the IP core and driver support chaining multiple transfers into a single longer transfer using the HOLD bit. So the maximum transfer size is not the limit for the length of the I2C transfer, but the limit for how much data can be transferred without having to reprogram the control registers. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/busses/i2c-cadence.c49
1 files changed, 42 insertions, 7 deletions
diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
index 0834e1ac9d03..8f61a633c42c 100644
--- a/drivers/i2c/busses/i2c-cadence.c
+++ b/drivers/i2c/busses/i2c-cadence.c
@@ -117,7 +117,7 @@
#define CDNS_I2C_FIFO_DEPTH_DEFAULT 16
#define CDNS_I2C_MAX_TRANSFER_SIZE 255
/* Transfer size in multiples of data interrupt depth */
-#define CDNS_I2C_TRANSFER_SIZE (CDNS_I2C_MAX_TRANSFER_SIZE - 3)
+#define CDNS_I2C_TRANSFER_SIZE(max) ((max) - 3)
#define DRIVER_NAME "cdns-i2c"
@@ -185,6 +185,7 @@ enum cdns_i2c_slave_state {
* @dev_mode: I2C operating role(master/slave).
* @slave_state: I2C Slave state(idle/read/write).
* @fifo_depth: The depth of the transfer FIFO
+ * @transfer_size: The maximum number of bytes in one transfer
*/
struct cdns_i2c {
struct device *dev;
@@ -213,6 +214,7 @@ struct cdns_i2c {
enum cdns_i2c_slave_state slave_state;
#endif
u32 fifo_depth;
+ unsigned int transfer_size;
};
struct cdns_platform_data {
@@ -466,10 +468,10 @@ static irqreturn_t cdns_i2c_master_isr(void *ptr)
* transfer size and update register accordingly.
*/
if (((int)(id->recv_count) - id->fifo_depth) >
- CDNS_I2C_TRANSFER_SIZE) {
- cdns_i2c_writereg(CDNS_I2C_TRANSFER_SIZE,
+ id->transfer_size) {
+ cdns_i2c_writereg(id->transfer_size,
CDNS_I2C_XFER_SIZE_OFFSET);
- id->curr_recv_count = CDNS_I2C_TRANSFER_SIZE +
+ id->curr_recv_count = id->transfer_size +
id->fifo_depth;
} else {
cdns_i2c_writereg(id->recv_count -
@@ -605,10 +607,10 @@ static void cdns_i2c_mrecv(struct cdns_i2c *id)
* receive if it is less than transfer size and transfer size if
* it is more. Enable the interrupts.
*/
- if (id->recv_count > CDNS_I2C_TRANSFER_SIZE) {
- cdns_i2c_writereg(CDNS_I2C_TRANSFER_SIZE,
+ if (id->recv_count > id->transfer_size) {
+ cdns_i2c_writereg(id->transfer_size,
CDNS_I2C_XFER_SIZE_OFFSET);
- id->curr_recv_count = CDNS_I2C_TRANSFER_SIZE;
+ id->curr_recv_count = id->transfer_size;
} else {
cdns_i2c_writereg(id->recv_count, CDNS_I2C_XFER_SIZE_OFFSET);
}
@@ -1228,6 +1230,37 @@ static const struct of_device_id cdns_i2c_of_match[] = {
MODULE_DEVICE_TABLE(of, cdns_i2c_of_match);
/**
+ * cdns_i2c_detect_transfer_size - Detect the maximum transfer size supported
+ * @id: Device private data structure
+ *
+ * Detect the maximum transfer size that is supported by this instance of the
+ * Cadence I2C controller.
+ */
+static void cdns_i2c_detect_transfer_size(struct cdns_i2c *id)
+{
+ u32 val;
+
+ /*
+ * Writing to the transfer size register is only possible if these two bits
+ * are set in the control register.
+ */
+ cdns_i2c_writereg(CDNS_I2C_CR_MS | CDNS_I2C_CR_RW, CDNS_I2C_CR_OFFSET);
+
+ /*
+ * The number of writable bits of the transfer size register can be between
+ * 4 and 8. This is a controlled through a synthesis parameter of the IP
+ * core and can vary from instance to instance. The unused MSBs always read
+ * back as 0. Writing 0xff and then reading the value back will report the
+ * maximum supported transfer size.
+ */
+ cdns_i2c_writereg(CDNS_I2C_MAX_TRANSFER_SIZE, CDNS_I2C_XFER_SIZE_OFFSET);
+ val = cdns_i2c_readreg(CDNS_I2C_XFER_SIZE_OFFSET);
+ id->transfer_size = CDNS_I2C_TRANSFER_SIZE(val);
+ cdns_i2c_writereg(0, CDNS_I2C_XFER_SIZE_OFFSET);
+ cdns_i2c_writereg(0, CDNS_I2C_CR_OFFSET);
+}
+
+/**
* cdns_i2c_probe - Platform registration call
* @pdev: Handle to the platform device structure
*
@@ -1321,6 +1354,8 @@ static int cdns_i2c_probe(struct platform_device *pdev)
id->fifo_depth = CDNS_I2C_FIFO_DEPTH_DEFAULT;
of_property_read_u32(pdev->dev.of_node, "fifo-depth", &id->fifo_depth);
+ cdns_i2c_detect_transfer_size(id);
+
ret = cdns_i2c_setclk(id->input_clk, id);
if (ret) {
dev_err(&pdev->dev, "invalid SCL clock: %u Hz\n", id->i2c_clk);