Merge tag 'i2c-host-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow

The i801 and designware drivers received most of the changes,
including refactorings and some additions.

Recovery changes for the iMX and iMX-LPI2C are now utilizing the
generic i2c support.

The Cadence driver now supports system suspend and resume.

The hisi, mpc, sh_mobile, and npcm drivers have undergone some
cleanups and improvements. Meanwhile, Uwe continues his work on
converting the "remove" callback to become a void function.

The pca954x mux driver now supports additional configurations,
such as isolating faulty channels and flushing stuck buses, among
others.

Support has been added for Renesas r8a779h0, i.MX95 LPI2C, and
Microchip sam9x7. Meanwhile, Geert lays the groundwork for the
upcoming R-Car Gen4.

16 files changed, 465 insertions, 444 deletions

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 28eb48dd5b32..97989c914260 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -1235,7 +1235,7 @@ config I2C_RCAR
 	depends on ARCH_RENESAS || COMPILE_TEST
 	select I2C_SLAVE
 	select I2C_SMBUS
-	select RESET_CONTROLLER if ARCH_RCAR_GEN3
+	select RESET_CONTROLLER if ARCH_RCAR_GEN3 || ARCH_RCAR_GEN4
 	help
 	  If you say yes to this option, support will be included for the
 	  R-Car I2C controller.
diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
index de3f58b60dce..4bb7d6756947 100644
--- a/drivers/i2c/busses/i2c-cadence.c
+++ b/drivers/i2c/busses/i2c-cadence.c
@@ -1176,6 +1176,18 @@ static int __maybe_unused cdns_i2c_runtime_suspend(struct device *dev)
 	return 0;
 }
 
+static int __maybe_unused cdns_i2c_suspend(struct device *dev)
+{
+	struct cdns_i2c *xi2c = dev_get_drvdata(dev);
+
+	i2c_mark_adapter_suspended(&xi2c->adap);
+
+	if (!pm_runtime_status_suspended(dev))
+		return cdns_i2c_runtime_suspend(dev);
+
+	return 0;
+}
+
 /**
  * cdns_i2c_init -  Controller initialisation
  * @id:		Device private data structure
@@ -1219,7 +1231,28 @@ static int __maybe_unused cdns_i2c_runtime_resume(struct device *dev)
 	return 0;
 }
 
+static int __maybe_unused cdns_i2c_resume(struct device *dev)
+{
+	struct cdns_i2c *xi2c = dev_get_drvdata(dev);
+	int err;
+
+	err = cdns_i2c_runtime_resume(dev);
+	if (err)
+		return err;
+
+	if (pm_runtime_status_suspended(dev)) {
+		err = cdns_i2c_runtime_suspend(dev);
+		if (err)
+			return err;
+	}
+
+	i2c_mark_adapter_resumed(&xi2c->adap);
+
+	return 0;
+}
+
 static const struct dev_pm_ops cdns_i2c_dev_pm_ops = {
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(cdns_i2c_suspend, cdns_i2c_resume)
 	SET_RUNTIME_PM_OPS(cdns_i2c_runtime_suspend,
 			   cdns_i2c_runtime_resume, NULL)
 };
diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c
index 35f762872b8a..e8a688d04aee 100644
--- a/drivers/i2c/busses/i2c-designware-common.c
+++ b/drivers/i2c/busses/i2c-designware-common.c
@@ -648,7 +648,7 @@ void i2c_dw_disable(struct dw_i2c_dev *dev)
 	__i2c_dw_disable(dev);
 
 	/* Disable all interrupts */
-	regmap_write(dev->map, DW_IC_INTR_MASK, 0);
+	__i2c_dw_write_intr_mask(dev, 0);
 	regmap_read(dev->map, DW_IC_CLR_INTR, &dummy);
 
 	i2c_dw_release_lock(dev);
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index a7f6f3eafad7..e9606c00b8d1 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -212,6 +212,7 @@ struct reset_control;
  * @msg_err: error status of the current transfer
  * @status: i2c master status, one of STATUS_*
  * @abort_source: copy of the TX_ABRT_SOURCE register
+ * @sw_mask: SW mask of DW_IC_INTR_MASK used in polling mode
  * @irq: interrupt number for the i2c master
  * @flags: platform specific flags like type of IO accessors or model
  * @adapter: i2c subsystem adapter node
@@ -270,6 +271,7 @@ struct dw_i2c_dev {
 	int			msg_err;
 	unsigned int		status;
 	unsigned int		abort_source;
+	unsigned int		sw_mask;
 	int			irq;
 	u32			flags;
 	struct i2c_adapter	adapter;
@@ -303,6 +305,7 @@ struct dw_i2c_dev {
 #define ACCESS_INTR_MASK			BIT(0)
 #define ACCESS_NO_IRQ_SUSPEND			BIT(1)
 #define ARBITRATION_SEMAPHORE			BIT(2)
+#define ACCESS_POLLING				BIT(3)
 
 #define MODEL_MSCC_OCELOT			BIT(8)
 #define MODEL_BAIKAL_BT1			BIT(9)
@@ -318,7 +321,7 @@ struct dw_i2c_dev {
 #define AMD_UCSI_INTR_EN			0xd
 
 #define TXGBE_TX_FIFO_DEPTH			4
-#define TXGBE_RX_FIFO_DEPTH			0
+#define TXGBE_RX_FIFO_DEPTH			1
 
 struct i2c_dw_semaphore_callbacks {
 	int	(*probe)(struct dw_i2c_dev *dev);
@@ -351,6 +354,24 @@ static inline void __i2c_dw_disable_nowait(struct dw_i2c_dev *dev)
 	dev->status &= ~STATUS_ACTIVE;
 }
 
+static inline void __i2c_dw_write_intr_mask(struct dw_i2c_dev *dev,
+					    unsigned int intr_mask)
+{
+	unsigned int val = dev->flags & ACCESS_POLLING ? 0 : intr_mask;
+
+	regmap_write(dev->map, DW_IC_INTR_MASK, val);
+	dev->sw_mask = intr_mask;
+}
+
+static inline void __i2c_dw_read_intr_mask(struct dw_i2c_dev *dev,
+					   unsigned int *intr_mask)
+{
+	if (!(dev->flags & ACCESS_POLLING))
+		regmap_read(dev->map, DW_IC_INTR_MASK, intr_mask);
+	else
+		*intr_mask = dev->sw_mask;
+}
+
 void __i2c_dw_disable(struct dw_i2c_dev *dev);
 
 extern void i2c_dw_configure_master(struct dw_i2c_dev *dev);
diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c
index 85dbd0eb5392..c7e56002809a 100644
--- a/drivers/i2c/busses/i2c-designware-master.c
+++ b/drivers/i2c/busses/i2c-designware-master.c
@@ -240,7 +240,7 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
 		     msgs[dev->msg_write_idx].addr | ic_tar);
 
 	/* Enforce disabled interrupts (due to HW issues) */
-	regmap_write(dev->map, DW_IC_INTR_MASK, 0);
+	__i2c_dw_write_intr_mask(dev, 0);
 
 	/* Enable the adapter */
 	__i2c_dw_enable(dev);
@@ -250,7 +250,7 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
 
 	/* Clear and enable interrupts */
 	regmap_read(dev->map, DW_IC_CLR_INTR, &dummy);
-	regmap_write(dev->map, DW_IC_INTR_MASK, DW_IC_INTR_MASTER_MASK);
+	__i2c_dw_write_intr_mask(dev, DW_IC_INTR_MASTER_MASK);
 }
 
 static int i2c_dw_check_stopbit(struct dw_i2c_dev *dev)
@@ -300,7 +300,6 @@ static int amd_i2c_dw_xfer_quirk(struct i2c_adapter *adap, struct i2c_msg *msgs,
 	dev->msgs = msgs;
 	dev->msgs_num = num_msgs;
 	i2c_dw_xfer_init(dev);
-	regmap_write(dev->map, DW_IC_INTR_MASK, 0);
 
 	/* Initiate messages read/write transaction */
 	for (msg_wrt_idx = 0; msg_wrt_idx < num_msgs; msg_wrt_idx++) {
@@ -355,68 +354,6 @@ static int amd_i2c_dw_xfer_quirk(struct i2c_adapter *adap, struct i2c_msg *msgs,
 	return 0;
 }
 
-static int i2c_dw_poll_tx_empty(struct dw_i2c_dev *dev)
-{
-	u32 val;
-
-	return regmap_read_poll_timeout(dev->map, DW_IC_RAW_INTR_STAT, val,
-					val & DW_IC_INTR_TX_EMPTY,
-					100, 1000);
-}
-
-static int i2c_dw_poll_rx_full(struct dw_i2c_dev *dev)
-{
-	u32 val;
-
-	return regmap_read_poll_timeout(dev->map, DW_IC_RAW_INTR_STAT, val,
-					val & DW_IC_INTR_RX_FULL,
-					100, 1000);
-}
-
-static int txgbe_i2c_dw_xfer_quirk(struct i2c_adapter *adap, struct i2c_msg *msgs,
-				   int num_msgs)
-{
-	struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
-	int msg_idx, buf_len, data_idx, ret;
-	unsigned int val, stop = 0;
-	u8 *buf;
-
-	dev->msgs = msgs;
-	dev->msgs_num = num_msgs;
-	i2c_dw_xfer_init(dev);
-	regmap_write(dev->map, DW_IC_INTR_MASK, 0);
-
-	for (msg_idx = 0; msg_idx < num_msgs; msg_idx++) {
-		buf = msgs[msg_idx].buf;
-		buf_len = msgs[msg_idx].len;
-
-		for (data_idx = 0; data_idx < buf_len; data_idx++) {
-			if (msg_idx == num_msgs - 1 && data_idx == buf_len - 1)
-				stop |= BIT(9);
-
-			if (msgs[msg_idx].flags & I2C_M_RD) {
-				regmap_write(dev->map, DW_IC_DATA_CMD, 0x100 | stop);
-
-				ret = i2c_dw_poll_rx_full(dev);
-				if (ret)
-					return ret;
-
-				regmap_read(dev->map, DW_IC_DATA_CMD, &val);
-				buf[data_idx] = val;
-			} else {
-				ret = i2c_dw_poll_tx_empty(dev);
-				if (ret)
-					return ret;
-
-				regmap_write(dev->map, DW_IC_DATA_CMD,
-					     buf[data_idx] | stop);
-			}
-		}
-	}
-
-	return num_msgs;
-}
-
 /*
  * Initiate (and continue) low level master read/write transaction.
  * This function is only called from i2c_dw_isr, and pumping i2c_msg
@@ -546,7 +483,7 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
 	if (dev->msg_err)
 		intr_mask = 0;
 
-	regmap_write(dev->map,  DW_IC_INTR_MASK, intr_mask);
+	__i2c_dw_write_intr_mask(dev, intr_mask);
 }
 
 static u8
@@ -554,6 +491,7 @@ i2c_dw_recv_len(struct dw_i2c_dev *dev, u8 len)
 {
 	struct i2c_msg *msgs = dev->msgs;
 	u32 flags = msgs[dev->msg_read_idx].flags;
+	unsigned int intr_mask;
 
 	/*
 	 * Adjust the buffer length and mask the flag
@@ -568,8 +506,9 @@ i2c_dw_recv_len(struct dw_i2c_dev *dev, u8 len)
 	 * Received buffer length, re-enable TX_EMPTY interrupt
 	 * to resume the SMBUS transaction.
 	 */
-	regmap_update_bits(dev->map, DW_IC_INTR_MASK, DW_IC_INTR_TX_EMPTY,
-			   DW_IC_INTR_TX_EMPTY);
+	__i2c_dw_read_intr_mask(dev, &intr_mask);
+	intr_mask |= DW_IC_INTR_TX_EMPTY;
+	__i2c_dw_write_intr_mask(dev, intr_mask);
 
 	return len;
 }
@@ -633,6 +572,169 @@ i2c_dw_read(struct dw_i2c_dev *dev)
 	}
 }
 
+static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev)
+{
+	unsigned int stat, dummy;
+
+	/*
+	 * The IC_INTR_STAT register just indicates "enabled" interrupts.
+	 * The unmasked raw version of interrupt status bits is available
+	 * in the IC_RAW_INTR_STAT register.
+	 *
+	 * That is,
+	 *   stat = readl(IC_INTR_STAT);
+	 * equals to,
+	 *   stat = readl(IC_RAW_INTR_STAT) & readl(IC_INTR_MASK);
+	 *
+	 * The raw version might be useful for debugging purposes.
+	 */
+	if (!(dev->flags & ACCESS_POLLING)) {
+		regmap_read(dev->map, DW_IC_INTR_STAT, &stat);
+	} else {
+		regmap_read(dev->map, DW_IC_RAW_INTR_STAT, &stat);
+		stat &= dev->sw_mask;
+	}
+
+	/*
+	 * Do not use the IC_CLR_INTR register to clear interrupts, or
+	 * you'll miss some interrupts, triggered during the period from
+	 * readl(IC_INTR_STAT) to readl(IC_CLR_INTR).
+	 *
+	 * Instead, use the separately-prepared IC_CLR_* registers.
+	 */
+	if (stat & DW_IC_INTR_RX_UNDER)
+		regmap_read(dev->map, DW_IC_CLR_RX_UNDER, &dummy);
+	if (stat & DW_IC_INTR_RX_OVER)
+		regmap_read(dev->map, DW_IC_CLR_RX_OVER, &dummy);
+	if (stat & DW_IC_INTR_TX_OVER)
+		regmap_read(dev->map, DW_IC_CLR_TX_OVER, &dummy);
+	if (stat & DW_IC_INTR_RD_REQ)
+		regmap_read(dev->map, DW_IC_CLR_RD_REQ, &dummy);
+	if (stat & DW_IC_INTR_TX_ABRT) {
+		/*
+		 * The IC_TX_ABRT_SOURCE register is cleared whenever
+		 * the IC_CLR_TX_ABRT is read.  Preserve it beforehand.
+		 */
+		regmap_read(dev->map, DW_IC_TX_ABRT_SOURCE, &dev->abort_source);
+		regmap_read(dev->map, DW_IC_CLR_TX_ABRT, &dummy);
+	}
+	if (stat & DW_IC_INTR_RX_DONE)
+		regmap_read(dev->map, DW_IC_CLR_RX_DONE, &dummy);
+	if (stat & DW_IC_INTR_ACTIVITY)
+		regmap_read(dev->map, DW_IC_CLR_ACTIVITY, &dummy);
+	if ((stat & DW_IC_INTR_STOP_DET) &&
+	    ((dev->rx_outstanding == 0) || (stat & DW_IC_INTR_RX_FULL)))
+		regmap_read(dev->map, DW_IC_CLR_STOP_DET, &dummy);
+	if (stat & DW_IC_INTR_START_DET)
+		regmap_read(dev->map, DW_IC_CLR_START_DET, &dummy);
+	if (stat & DW_IC_INTR_GEN_CALL)
+		regmap_read(dev->map, DW_IC_CLR_GEN_CALL, &dummy);
+
+	return stat;
+}
+
+static void i2c_dw_process_transfer(struct dw_i2c_dev *dev, unsigned int stat)
+{
+	if (stat & DW_IC_INTR_TX_ABRT) {
+		dev->cmd_err |= DW_IC_ERR_TX_ABRT;
+		dev->status &= ~STATUS_MASK;
+		dev->rx_outstanding = 0;
+
+		/*
+		 * Anytime TX_ABRT is set, the contents of the tx/rx
+		 * buffers are flushed. Make sure to skip them.
+		 */
+		__i2c_dw_write_intr_mask(dev, 0);
+		goto tx_aborted;
+	}
+
+	if (stat & DW_IC_INTR_RX_FULL)
+		i2c_dw_read(dev);
+
+	if (stat & DW_IC_INTR_TX_EMPTY)
+		i2c_dw_xfer_msg(dev);
+
+	/*
+	 * No need to modify or disable the interrupt mask here.
+	 * i2c_dw_xfer_msg() will take care of it according to
+	 * the current transmit status.
+	 */
+
+tx_aborted:
+	if (((stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET)) || dev->msg_err) &&
+	     (dev->rx_outstanding == 0))
+		complete(&dev->cmd_complete);
+	else if (unlikely(dev->flags & ACCESS_INTR_MASK)) {
+		/* Workaround to trigger pending interrupt */
+		__i2c_dw_read_intr_mask(dev, &stat);
+		__i2c_dw_write_intr_mask(dev, 0);
+		__i2c_dw_write_intr_mask(dev, stat);
+	}
+}
+
+/*
+ * Interrupt service routine. This gets called whenever an I2C master interrupt
+ * occurs.
+ */
+static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
+{
+	struct dw_i2c_dev *dev = dev_id;
+	unsigned int stat, enabled;
+
+	regmap_read(dev->map, DW_IC_ENABLE, &enabled);
+	regmap_read(dev->map, DW_IC_RAW_INTR_STAT, &stat);
+	if (!enabled || !(stat & ~DW_IC_INTR_ACTIVITY))
+		return IRQ_NONE;
+	if (pm_runtime_suspended(dev->dev) || stat == GENMASK(31, 0))
+		return IRQ_NONE;
+	dev_dbg(dev->dev, "enabled=%#x stat=%#x\n", enabled, stat);
+
+	stat = i2c_dw_read_clear_intrbits(dev);
+
+	if (!(dev->status & STATUS_ACTIVE)) {
+		/*
+		 * Unexpected interrupt in driver point of view. State
+		 * variables are either unset or stale so acknowledge and
+		 * disable interrupts for suppressing further interrupts if
+		 * interrupt really came from this HW (E.g. firmware has left
+		 * the HW active).
+		 */
+		__i2c_dw_write_intr_mask(dev, 0);
+		return IRQ_HANDLED;
+	}
+
+	i2c_dw_process_transfer(dev, stat);
+
+	return IRQ_HANDLED;
+}
+
+static int i2c_dw_wait_transfer(struct dw_i2c_dev *dev)
+{
+	unsigned long timeout = dev->adapter.timeout;
+	unsigned int stat;
+	int ret;
+
+	if (!(dev->flags & ACCESS_POLLING)) {
+		ret = wait_for_completion_timeout(&dev->cmd_complete, timeout);
+	} else {
+		timeout += jiffies;
+		do {
+			ret = try_wait_for_completion(&dev->cmd_complete);
+			if (ret)
+				break;
+
+			stat = i2c_dw_read_clear_intrbits(dev);
+			if (stat)
+				i2c_dw_process_transfer(dev, stat);
+			else
+				/* Try save some power */
+				usleep_range(3, 25);
+		} while (time_before(jiffies, timeout));
+	}
+
+	return ret ? 0 : -ETIMEDOUT;
+}
+
 /*
  * Prepare controller for a transaction and call i2c_dw_xfer_msg.
  */
@@ -646,18 +748,10 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 
 	pm_runtime_get_sync(dev->dev);
 
-	/*
-	 * Initiate I2C message transfer when polling mode is enabled,
-	 * As it is polling based transfer mechanism, which does not support
-	 * interrupt based functionalities of existing DesignWare driver.
-	 */
 	switch (dev->flags & MODEL_MASK) {
 	case MODEL_AMD_NAVI_GPU:
 		ret = amd_i2c_dw_xfer_quirk(adap, msgs, num);
 		goto done_nolock;
-	case MODEL_WANGXUN_SP:
-		ret = txgbe_i2c_dw_xfer_quirk(adap, msgs, num);
-		goto done_nolock;
 	default:
 		break;
 	}
@@ -685,12 +779,12 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 	i2c_dw_xfer_init(dev);
 
 	/* Wait for tx to complete */
-	if (!wait_for_completion_timeout(&dev->cmd_complete, adap->timeout)) {
+	ret = i2c_dw_wait_transfer(dev);
+	if (ret) {
 		dev_err(dev->dev, "controller timed out\n");
-		/* i2c_dw_init implicitly disables the adapter */
+		/* i2c_dw_init_master() implicitly disables the adapter */
 		i2c_recover_bus(&dev->adapter);
 		i2c_dw_init_master(dev);
-		ret = -ETIMEDOUT;
 		goto done;
 	}
 
@@ -698,7 +792,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 	 * We must disable the adapter before returning and signaling the end
 	 * of the current transfer. Otherwise the hardware might continue
 	 * generating interrupts which in turn causes a race condition with
-	 * the following transfer.  Needs some more investigation if the
+	 * the following transfer. Needs some more investigation if the
 	 * additional interrupts are a hardware bug or this driver doesn't
 	 * handle them correctly yet.
 	 */
@@ -746,132 +840,6 @@ static const struct i2c_adapter_quirks i2c_dw_quirks = {
 	.flags = I2C_AQ_NO_ZERO_LEN,
 };
 
-static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev)
-{
-	unsigned int stat, dummy;
-
-	/*
-	 * The IC_INTR_STAT register just indicates "enabled" interrupts.
-	 * The unmasked raw version of interrupt status bits is available
-	 * in the IC_RAW_INTR_STAT register.
-	 *
-	 * That is,
-	 *   stat = readl(IC_INTR_STAT);
-	 * equals to,
-	 *   stat = readl(IC_RAW_INTR_STAT) & readl(IC_INTR_MASK);
-	 *
-	 * The raw version might be useful for debugging purposes.
-	 */
-	regmap_read(dev->map, DW_IC_INTR_STAT, &stat);
-
-	/*
-	 * Do not use the IC_CLR_INTR register to clear interrupts, or
-	 * you'll miss some interrupts, triggered during the period from
-	 * readl(IC_INTR_STAT) to readl(IC_CLR_INTR).
-	 *
-	 * Instead, use the separately-prepared IC_CLR_* registers.
-	 */
-	if (stat & DW_IC_INTR_RX_UNDER)
-		regmap_read(dev->map, DW_IC_CLR_RX_UNDER, &dummy);
-	if (stat & DW_IC_INTR_RX_OVER)
-		regmap_read(dev->map, DW_IC_CLR_RX_OVER, &dummy);
-	if (stat & DW_IC_INTR_TX_OVER)
-		regmap_read(dev->map, DW_IC_CLR_TX_OVER, &dummy);
-	if (stat & DW_IC_INTR_RD_REQ)
-		regmap_read(dev->map, DW_IC_CLR_RD_REQ, &dummy);
-	if (stat & DW_IC_INTR_TX_ABRT) {
-		/*
-		 * The IC_TX_ABRT_SOURCE register is cleared whenever
-		 * the IC_CLR_TX_ABRT is read.  Preserve it beforehand.
-		 */
-		regmap_read(dev->map, DW_IC_TX_ABRT_SOURCE, &dev->abort_source);
-		regmap_read(dev->map, DW_IC_CLR_TX_ABRT, &dummy);
-	}
-	if (stat & DW_IC_INTR_RX_DONE)
-		regmap_read(dev->map, DW_IC_CLR_RX_DONE, &dummy);
-	if (stat & DW_IC_INTR_ACTIVITY)
-		regmap_read(dev->map, DW_IC_CLR_ACTIVITY, &dummy);
-	if ((stat & DW_IC_INTR_STOP_DET) &&
-	    ((dev->rx_outstanding == 0) || (stat & DW_IC_INTR_RX_FULL)))
-		regmap_read(dev->map, DW_IC_CLR_STOP_DET, &dummy);
-	if (stat & DW_IC_INTR_START_DET)
-		regmap_read(dev->map, DW_IC_CLR_START_DET, &dummy);
-	if (stat & DW_IC_INTR_GEN_CALL)
-		regmap_read(dev->map, DW_IC_CLR_GEN_CALL, &dummy);
-
-	return stat;
-}
-
-/*
- * Interrupt service routine. This gets called whenever an I2C master interrupt
- * occurs.
- */
-static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
-{
-	struct dw_i2c_dev *dev = dev_id;
-	unsigned int stat, enabled;
-
-	regmap_read(dev->map, DW_IC_ENABLE, &enabled);
-	regmap_read(dev->map, DW_IC_RAW_INTR_STAT, &stat);
-	if (!enabled || !(stat & ~DW_IC_INTR_ACTIVITY))
-		return IRQ_NONE;
-	if (pm_runtime_suspended(dev->dev) || stat == GENMASK(31, 0))
-		return IRQ_NONE;
-	dev_dbg(dev->dev, "enabled=%#x stat=%#x\n", enabled, stat);
-
-	stat = i2c_dw_read_clear_intrbits(dev);
-
-	if (!(dev->status & STATUS_ACTIVE)) {
-		/*
-		 * Unexpected interrupt in driver point of view. State
-		 * variables are either unset or stale so acknowledge and
-		 * disable interrupts for suppressing further interrupts if
-		 * interrupt really came from this HW (E.g. firmware has left
-		 * the HW active).
-		 */
-		regmap_write(dev->map, DW_IC_INTR_MASK, 0);
-		return IRQ_HANDLED;
-	}
-
-	if (stat & DW_IC_INTR_TX_ABRT) {
-		dev->cmd_err |= DW_IC_ERR_TX_ABRT;
-		dev->status &= ~STATUS_MASK;
-		dev->rx_outstanding = 0;
-
-		/*
-		 * Anytime TX_ABRT is set, the contents of the tx/rx
-		 * buffers are flushed. Make sure to skip them.
-		 */
-		regmap_write(dev->map, DW_IC_INTR_MASK, 0);
-		goto tx_aborted;
-	}
-
-	if (stat & DW_IC_INTR_RX_FULL)
-		i2c_dw_read(dev);
-
-	if (stat & DW_IC_INTR_TX_EMPTY)
-		i2c_dw_xfer_msg(dev);
-
-	/*
-	 * No need to modify or disable the interrupt mask here.
-	 * i2c_dw_xfer_msg() will take care of it according to
-	 * the current transmit status.
-	 */
-
-tx_aborted:
-	if (((stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET)) || dev->msg_err) &&
-	     (dev->rx_outstanding == 0))
-		complete(&dev->cmd_complete);
-	else if (unlikely(dev->flags & ACCESS_INTR_MASK)) {
-		/* Workaround to trigger pending interrupt */
-		regmap_read(dev->map, DW_IC_INTR_MASK, &stat);
-		regmap_write(dev->map, DW_IC_INTR_MASK, 0);
-		regmap_write(dev->map, DW_IC_INTR_MASK, stat);
-	}
-
-	return IRQ_HANDLED;
-}
-
 void i2c_dw_configure_master(struct dw_i2c_dev *dev)
 {
 	struct i2c_timings *t = &dev->timings;
@@ -953,31 +921,6 @@ static int i2c_dw_init_recovery_info(struct dw_i2c_dev *dev)
 	return 0;
 }
 
-static int i2c_dw_poll_adap_quirk(struct dw_i2c_dev *dev)
-{
-	struct i2c_adapter *adap = &dev->adapter;
-	int ret;
-
-	pm_runtime_get_noresume(dev->dev);
-	ret = i2c_add_numbered_adapter(adap);
-	if (ret)
-		dev_err(dev->dev, "Failed to add adapter: %d\n", ret);
-	pm_runtime_put_noidle(dev->dev);
-
-	return ret;
-}
-
-static bool i2c_dw_is_model_poll(struct dw_i2c_dev *dev)
-{
-	switch (dev->flags & MODEL_MASK) {
-	case MODEL_AMD_NAVI_GPU:
-	case MODEL_WANGXUN_SP:
-		return true;
-	default:
-		return false;
-	}
-}
-
 int i2c_dw_probe_master(struct dw_i2c_dev *dev)
 {
 	struct i2c_adapter *adap = &dev->adapter;
@@ -1033,9 +976,6 @@ int i2c_dw_probe_master(struct dw_i2c_dev *dev)
 	adap->dev.parent = dev->dev;
 	i2c_set_adapdata(adap, dev);
 
-	if (i2c_dw_is_model_poll(dev))
-		return i2c_dw_poll_adap_quirk(dev);
-
 	if (dev->flags & ACCESS_NO_IRQ_SUSPEND) {
 		irq_flags = IRQF_NO_SUSPEND;
 	} else {
@@ -1046,15 +986,17 @@ int i2c_dw_probe_master(struct dw_i2c_dev *dev)
 	if (ret)
 		return ret;
 
-	regmap_write(dev->map, DW_IC_INTR_MASK, 0);
+	__i2c_dw_write_intr_mask(dev, 0);
 	i2c_dw_release_lock(dev);
 
-	ret = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr, irq_flags,
-			       dev_name(dev->dev), dev);
-	if (ret) {
-		dev_err(dev->dev, "failure requesting irq %i: %d\n",
-			dev->irq, ret);
-		return ret;
+	if (!(dev->flags & ACCESS_POLLING)) {
+		ret = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr,
+				       irq_flags, dev_name(dev->dev), dev);
+		if (ret) {
+			dev_err(dev->dev, "failure requesting irq %i: %d\n",
+				dev->irq, ret);
+			return ret;
+		}
 	}
 
 	ret = i2c_dw_init_recovery_info(dev);
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index 61d7a27aa070..9be9a2658e1f 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -154,7 +154,7 @@ static int navi_amd_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
 {
 	struct dw_i2c_dev *dev = dev_get_drvdata(&pdev->dev);
 
-	dev->flags |= MODEL_AMD_NAVI_GPU;
+	dev->flags |= MODEL_AMD_NAVI_GPU | ACCESS_POLLING;
 	dev->timings.bus_freq_hz = I2C_MAX_STANDARD_MODE_FREQ;
 	return 0;
 }
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 855b698e99c0..4ab41ba39d55 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -290,7 +290,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 
 	dev->flags = (uintptr_t)device_get_match_data(&pdev->dev);
 	if (device_property_present(&pdev->dev, "wx,i2c-snps-model"))
-		dev->flags = MODEL_WANGXUN_SP;
+		dev->flags = MODEL_WANGXUN_SP | ACCESS_POLLING;
 
 	dev->dev = &pdev->dev;
 	dev->irq = irq;
diff --git a/drivers/i2c/busses/i2c-hisi.c b/drivers/i2c/busses/i2c-hisi.c
index dfad5bad5075..975c0b1c44de 100644
--- a/drivers/i2c/busses/i2c-hisi.c
+++ b/drivers/i2c/busses/i2c-hisi.c
@@ -57,6 +57,8 @@
 #define   HISI_I2C_FS_SPK_LEN_CNT	GENMASK(7, 0)
 #define HISI_I2C_HS_SPK_LEN		0x003c
 #define   HISI_I2C_HS_SPK_LEN_CNT	GENMASK(7, 0)
+#define HISI_I2C_TX_INT_CLR		0x0040
+#define   HISI_I2C_TX_AEMPTY_INT		BIT(0)
 #define HISI_I2C_INT_MSTAT		0x0044
 #define HISI_I2C_INT_CLR		0x0048
 #define HISI_I2C_INT_MASK		0x004C
@@ -124,6 +126,11 @@ static void hisi_i2c_clear_int(struct hisi_i2c_controller *ctlr, u32 mask)
 	writel_relaxed(mask, ctlr->iobase + HISI_I2C_INT_CLR);
 }
 
+static void hisi_i2c_clear_tx_int(struct hisi_i2c_controller *ctlr, u32 mask)
+{
+	writel_relaxed(mask, ctlr->iobase + HISI_I2C_TX_INT_CLR);
+}
+
 static void hisi_i2c_handle_errors(struct hisi_i2c_controller *ctlr)
 {
 	u32 int_err = ctlr->xfer_err, reg;
@@ -168,6 +175,7 @@ static int hisi_i2c_start_xfer(struct hisi_i2c_controller *ctlr)
 	writel(reg, ctlr->iobase + HISI_I2C_FIFO_CTRL);
 
 	hisi_i2c_clear_int(ctlr, HISI_I2C_INT_ALL);
+	hisi_i2c_clear_tx_int(ctlr, HISI_I2C_TX_AEMPTY_INT);
 	hisi_i2c_enable_int(ctlr, HISI_I2C_INT_ALL);
 
 	return 0;
@@ -266,7 +274,7 @@ static int hisi_i2c_read_rx_fifo(struct hisi_i2c_controller *ctlr)
 
 static void hisi_i2c_xfer_msg(struct hisi_i2c_controller *ctlr)
 {
-	int max_write = HISI_I2C_TX_FIFO_DEPTH;
+	int max_write = HISI_I2C_TX_FIFO_DEPTH - HISI_I2C_TX_F_AE_THRESH;
 	bool need_restart = false, last_msg;
 	struct i2c_msg *cur_msg;
 	u32 cmd, fifo_state;
@@ -323,6 +331,8 @@ static void hisi_i2c_xfer_msg(struct hisi_i2c_controller *ctlr)
 	 */
 	if (ctlr->msg_tx_idx == ctlr->msg_num)
 		hisi_i2c_disable_int(ctlr, HISI_I2C_INT_TX_EMPTY);
+
+	hisi_i2c_clear_tx_int(ctlr, HISI_I2C_TX_AEMPTY_INT);
 }
 
 static irqreturn_t hisi_i2c_irq(int irq, void *context)
@@ -363,6 +373,7 @@ out:
 	if (int_stat & HISI_I2C_INT_TRANS_CPLT) {
 		hisi_i2c_disable_int(ctlr, HISI_I2C_INT_ALL);
 		hisi_i2c_clear_int(ctlr, HISI_I2C_INT_ALL);
+		hisi_i2c_clear_tx_int(ctlr, HISI_I2C_TX_AEMPTY_INT);
 		complete(ctlr->completion);
 	}
 
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 2c36b36d7d51..291c609d1b9d 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -205,6 +205,8 @@
 #define STATUS_FLAGS		(SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR | \
 				 STATUS_ERROR_FLAGS)
 
+#define SMBUS_LEN_SENTINEL (I2C_SMBUS_BLOCK_MAX + 1)
+
 /* Older devices have their ID defined in <linux/pci_ids.h> */
 #define PCI_DEVICE_ID_INTEL_COMETLAKE_SMBUS		0x02a3
 #define PCI_DEVICE_ID_INTEL_COMETLAKE_H_SMBUS		0x06a3
@@ -328,11 +330,39 @@ MODULE_PARM_DESC(disable_features, "Disable selected driver features:\n"
 	"\t\t  0x10  don't use interrupts\n"
 	"\t\t  0x20  disable SMBus Host Notify ");
 
+static int i801_get_block_len(struct i801_priv *priv)
+{
+	u8 len = inb_p(SMBHSTDAT0(priv));
+
+	if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
+		pci_err(priv->pci_dev, "Illegal SMBus block read size %u\n", len);
+		return -EPROTO;
+	}
+
+	return len;
+}
+
+static int i801_check_and_clear_pec_error(struct i801_priv *priv)
+{
+	u8 status;
+
+	if (!(priv->features & FEATURE_SMBUS_PEC))
+		return 0;
+
+	status = inb_p(SMBAUXSTS(priv)) & SMBAUXSTS_CRCE;
+	if (status) {
+		outb_p(status, SMBAUXSTS(priv));
+		return -EBADMSG;
+	}
+
+	return 0;
+}
+
 /* Make sure the SMBus host is ready to start transmitting.
    Return 0 if it is, -EBUSY if it is not. */
 static int i801_check_pre(struct i801_priv *priv)
 {
-	int status;
+	int status, result;
 
 	status = inb_p(SMBHSTSTS(priv));
 	if (status & SMBHSTSTS_HOST_BUSY) {
@@ -353,13 +383,9 @@ static int i801_check_pre(struct i801_priv *priv)
 	 * the hardware was already in this state when the driver
 	 * started.
 	 */
-	if (priv->features & FEATURE_SMBUS_PEC) {
-		status = inb_p(SMBAUXSTS(priv)) & SMBAUXSTS_CRCE;
-		if (status) {
-			pci_dbg(priv->pci_dev, "Clearing aux status flags (%02x)\n", status);
-			outb_p(status, SMBAUXSTS(priv));
-		}
-	}
+	result = i801_check_and_clear_pec_error(priv);
+	if (result)
+		pci_dbg(priv->pci_dev, "Clearing aux status flag CRCE\n");
 
 	return 0;
 }
@@ -408,14 +434,12 @@ static int i801_check_post(struct i801_priv *priv, int status)
 		 * bit is harmless as long as it's cleared before
 		 * the next operation.
 		 */
-		if ((priv->features & FEATURE_SMBUS_PEC) &&
-		    (inb_p(SMBAUXSTS(priv)) & SMBAUXSTS_CRCE)) {
-			outb_p(SMBAUXSTS_CRCE, SMBAUXSTS(priv));
-			result = -EBADMSG;
-			dev_dbg(&priv->pci_dev->dev, "PEC error\n");
+		result = i801_check_and_clear_pec_error(priv);
+		if (result) {
+			pci_dbg(priv->pci_dev, "PEC error\n");
 		} else {
 			result = -ENXIO;
-			dev_dbg(&priv->pci_dev->dev, "No response\n");
+			pci_dbg(priv->pci_dev, "No response\n");
 		}
 	}
 	if (status & SMBHSTSTS_BUS_ERR) {
@@ -512,12 +536,11 @@ static int i801_block_transaction_by_block(struct i801_priv *priv,
 
 	if (read_write == I2C_SMBUS_READ ||
 	    command == I2C_SMBUS_BLOCK_PROC_CALL) {
-		len = inb_p(SMBHSTDAT0(priv));
-		if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
-			status = -EPROTO;
+		status = i801_get_block_len(priv);
+		if (status < 0)
 			goto out;
-		}
 
+		len = status;
 		data->block[0] = len;
 		inb_p(SMBHSTCNT(priv));	/* reset the data buffer index */
 		for (i = 0; i < len; i++)
@@ -531,17 +554,17 @@ out:
 static void i801_isr_byte_done(struct i801_priv *priv)
 {
 	if (priv->is_read) {
-		/* For SMBus block reads, length is received with first byte */
-		if (((priv->cmd & 0x1c) == I801_BLOCK_DATA) &&
-		    (priv->count == 0)) {
-			priv->len = inb_p(SMBHSTDAT0(priv));
-			if (priv->len < 1 || priv->len > I2C_SMBUS_BLOCK_MAX) {
-				dev_err(&priv->pci_dev->dev,
-					"Illegal SMBus block read size %d\n",
-					priv->len);
+		/*
+		 * At transfer start i801_smbus_block_transaction() marks
+		 * the block length as invalid. Check for this sentinel value
+		 * and read the block length from SMBHSTDAT0.
+		 */
+		if (priv->len == SMBUS_LEN_SENTINEL) {
+			priv->len = i801_get_block_len(priv);
+			if (priv->len < 0)
 				/* FIXME: Recover */
 				priv->len = I2C_SMBUS_BLOCK_MAX;
-			}
+
 			priv->data[-1] = priv->len;
 		}
 
@@ -688,13 +711,14 @@ static int i801_block_transaction_byte_by_byte(struct i801_priv *priv,
 		if (status)
 			return status;
 
-		if (i == 1 && read_write == I2C_SMBUS_READ
-		 && command != I2C_SMBUS_I2C_BLOCK_DATA) {
-			len = inb_p(SMBHSTDAT0(priv));
-			if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
-				dev_err(&priv->pci_dev->dev,
-					"Illegal SMBus block read size %d\n",
-					len);
+		/*
+		 * At transfer start i801_smbus_block_transaction() marks
+		 * the block length as invalid. Check for this sentinel value
+		 * and read the block length from SMBHSTDAT0.
+		 */
+		if (len == SMBUS_LEN_SENTINEL) {
+			len = i801_get_block_len(priv);
+			if (len < 0) {
 				/* Recover */
 				while (inb_p(SMBHSTSTS(priv)) &
 				       SMBHSTSTS_HOST_BUSY)
@@ -792,77 +816,66 @@ static int i801_simple_transaction(struct i801_priv *priv, union i2c_smbus_data
 	return 0;
 }
 
-/* Block transaction function */
-static int i801_block_transaction(struct i801_priv *priv, union i2c_smbus_data *data,
-				  u8 addr, u8 hstcmd, char read_write, int command)
+static int i801_smbus_block_transaction(struct i801_priv *priv, union i2c_smbus_data *data,
+					u8 addr, u8 hstcmd, char read_write, int command)
 {
-	int result = 0;
-	unsigned char hostc;
-
 	if (read_write == I2C_SMBUS_READ && command == I2C_SMBUS_BLOCK_DATA)
-		data->block[0] = I2C_SMBUS_BLOCK_MAX;
+		/* Mark block length as invalid */
+		data->block[0] = SMBUS_LEN_SENTINEL;
 	else if (data->block[0] < 1 || data->block[0] > I2C_SMBUS_BLOCK_MAX)
 		return -EPROTO;
 
-	switch (command) {
-	case I2C_SMBUS_BLOCK_DATA:
-		i801_set_hstadd(priv, addr, read_write);
-		outb_p(hstcmd, SMBHSTCMD(priv));
-		break;
-	case I2C_SMBUS_I2C_BLOCK_DATA:
-		/*
-		 * NB: page 240 of ICH5 datasheet shows that the R/#W
-		 * bit should be cleared here, even when reading.
-		 * However if SPD Write Disable is set (Lynx Point and later),
-		 * the read will fail if we don't set the R/#W bit.
-		 */
-		i801_set_hstadd(priv, addr,
-				priv->original_hstcfg & SMBHSTCFG_SPD_WD ?
-				read_write : I2C_SMBUS_WRITE);
-		if (read_write == I2C_SMBUS_READ) {
-			/* NB: page 240 of ICH5 datasheet also shows
-			 * that DATA1 is the cmd field when reading
-			 */
-			outb_p(hstcmd, SMBHSTDAT1(priv));
-		} else
-			outb_p(hstcmd, SMBHSTCMD(priv));
-
-		if (read_write == I2C_SMBUS_WRITE) {
-			/* set I2C_EN bit in configuration register */
-			pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &hostc);
-			pci_write_config_byte(priv->pci_dev, SMBHSTCFG,
-					      hostc | SMBHSTCFG_I2C_EN);
-		} else if (!(priv->features & FEATURE_I2C_BLOCK_READ)) {
-			dev_err(&priv->pci_dev->dev,
-				"I2C block read is unsupported!\n");
-			return -EOPNOTSUPP;
-		}
-		break;
-	case I2C_SMBUS_BLOCK_PROC_CALL:
+	if (command == I2C_SMBUS_BLOCK_PROC_CALL)
 		/* Needs to be flagged as write transaction */
 		i801_set_hstadd(priv, addr, I2C_SMBUS_WRITE);
+	else
+		i801_set_hstadd(priv, addr, read_write);
+	outb_p(hstcmd, SMBHSTCMD(priv));
+
+	if (priv->features & FEATURE_BLOCK_BUFFER)
+		return i801_block_transaction_by_block(priv, data, read_write, command);
+	else
+		return i801_block_transaction_byte_by_byte(priv, data, read_write, command);
+}
+
+static int i801_i2c_block_transaction(struct i801_priv *priv, union i2c_smbus_data *data,
+				      u8 addr, u8 hstcmd, char read_write, int command)
+{
+	int result;
+	u8 hostc;
+
+	if (data->block[0] < 1 || data->block[0] > I2C_SMBUS_BLOCK_MAX)
+		return -EPROTO;
+	/*
+	 * NB: page 240 of ICH5 datasheet shows that the R/#W bit should be cleared here,
+	 * even when reading. However if SPD Write Disable is set (Lynx Point and later),
+	 * the read will fail if we don't set the R/#W bit.
+	 */
+	i801_set_hstadd(priv, addr,
+			priv->original_hstcfg & SMBHSTCFG_SPD_WD ? read_write : I2C_SMBUS_WRITE);
+
+	/* NB: page 240 of ICH5 datasheet shows that DATA1 is the cmd field when reading */
+	if (read_write == I2C_SMBUS_READ)
+		outb_p(hstcmd, SMBHSTDAT1(priv));
+	else
 		outb_p(hstcmd, SMBHSTCMD(priv));
-		break;
+
+	if (read_write == I2C_SMBUS_WRITE) {
+		/* set I2C_EN bit in configuration register */
+		pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &hostc);
+		pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hostc | SMBHSTCFG_I2C_EN);
+	} else if (!(priv->features & FEATURE_I2C_BLOCK_READ)) {
+		pci_err(priv->pci_dev, "I2C block read is unsupported!\n");
+		return -EOPNOTSUPP;
 	}
 
-	/* Experience has shown that the block buffer can only be used for
-	   SMBus (not I2C) block transactions, even though the datasheet
-	   doesn't mention this limitation. */
-	if ((priv->features & FEATURE_BLOCK_BUFFER) &&
-	    command != I2C_SMBUS_I2C_BLOCK_DATA)
-		result = i801_block_transaction_by_block(priv, data,
-							 read_write,
-							 command);
-	else
-		result = i801_block_transaction_byte_by_byte(priv, data,
-							     read_write,
-							     command);
+	/* Block buffer isn't supported for I2C block transactions */
+	result = i801_block_transaction_byte_by_byte(priv, data, read_write, command);
 
-	if (command == I2C_SMBUS_I2C_BLOCK_DATA
-	 && read_write == I2C_SMBUS_WRITE) {
-		/* restore saved configuration register value */
+	/* restore saved configuration register value */
+	if (read_write == I2C_SMBUS_WRITE)
 		pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hostc);
-	}
+
 	return result;
 }
 
@@ -893,10 +906,10 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr,
 		outb_p(inb_p(SMBAUXCTL(priv)) & (~SMBAUXCTL_CRC),
 		       SMBAUXCTL(priv));
 
-	if (size == I2C_SMBUS_BLOCK_DATA ||
-	    size == I2C_SMBUS_I2C_BLOCK_DATA ||
-	    size == I2C_SMBUS_BLOCK_PROC_CALL)
-		ret = i801_block_transaction(priv, data, addr, command, read_write, size);
+	if (size == I2C_SMBUS_BLOCK_DATA || size == I2C_SMBUS_BLOCK_PROC_CALL)
+		ret = i801_smbus_block_transaction(priv, data, addr, command, read_write, size);
+	else if (size == I2C_SMBUS_I2C_BLOCK_DATA)
+		ret = i801_i2c_block_transaction(priv, data, addr, command, read_write, size);
 	else
 		ret = i801_simple_transaction(priv, data, addr, command, read_write, size);
 
@@ -969,11 +982,10 @@ static const struct i2c_algorithm smbus_algorithm = {
 	.functionality	= i801_func,
 };
 
-#define FEATURES_ICH5	(FEATURE_BLOCK_PROC | FEATURE_I2C_BLOCK_READ	| \
-			 FEATURE_IRQ | FEATURE_SMBUS_PEC		| \
-			 FEATURE_BLOCK_BUFFER | FEATURE_HOST_NOTIFY)
 #define FEATURES_ICH4	(FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER | \
 			 FEATURE_HOST_NOTIFY)
+#define FEATURES_ICH5	(FEATURES_ICH4 | FEATURE_BLOCK_PROC | \
+			 FEATURE_I2C_BLOCK_READ | FEATURE_IRQ)
 
 static const struct pci_device_id i801_ids[] = {
 	{ PCI_DEVICE_DATA(INTEL, 82801AA_3,			0)				 },
@@ -1117,7 +1129,7 @@ static void dmi_check_onboard_devices(const struct dmi_header *dm, void *adap)
 {
 	int i, count;
 
-	if (dm->type != 10)
+	if (dm->type != DMI_ENTRY_ONBOARD_DEVICE)
 		return;
 
 	count = (dm->length - sizeof(struct dmi_header)) / 2;
@@ -1445,8 +1457,7 @@ static inline void i801_del_mux(struct i801_priv *priv) { }
 #endif
 
 static struct platform_device *
-i801_add_tco_spt(struct i801_priv *priv, struct pci_dev *pci_dev,
-		 struct resource *tco_res)
+i801_add_tco_spt(struct pci_dev *pci_dev, struct resource *tco_res)
 {
 	static const struct itco_wdt_platform_data pldata = {
 		.name = "Intel PCH",
@@ -1477,8 +1488,7 @@ i801_add_tco_spt(struct i801_priv *priv, struct pci_dev *pci_dev,
 }
 
 static struct platform_device *
-i801_add_tco_cnl(struct i801_priv *priv, struct pci_dev *pci_dev,
-		 struct resource *tco_res)
+i801_add_tco_cnl(struct pci_dev *pci_dev, struct resource *tco_res)
 {
 	static const struct itco_wdt_platform_data pldata = {
 		.name = "Intel PCH",
@@ -1518,9 +1528,9 @@ static void i801_add_tco(struct i801_priv *priv)
 	res->flags = IORESOURCE_IO;
 
 	if (priv->features & FEATURE_TCO_CNL)
-		priv->tco_pdev = i801_add_tco_cnl(priv, pci_dev, tco_res);
+		priv->tco_pdev = i801_add_tco_cnl(pci_dev, tco_res);
 	else
-		priv->tco_pdev = i801_add_tco_spt(priv, pci_dev, tco_res);
+		priv->tco_pdev = i801_add_tco_spt(pci_dev, tco_res);
 
 	if (IS_ERR(priv->tco_pdev))
 		dev_warn(&pci_dev->dev, "failed to create iTCO device\n");
diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c b/drivers/i2c/busses/i2c-imx-lpi2c.c
index 678b30e90492..6d72e4e126dd 100644
--- a/drivers/i2c/busses/i2c-imx-lpi2c.c
+++ b/drivers/i2c/busses/i2c-imx-lpi2c.c
@@ -106,6 +106,7 @@ struct lpi2c_imx_struct {
 	unsigned int		txfifosize;
 	unsigned int		rxfifosize;
 	enum lpi2c_imx_mode	mode;
+	struct i2c_bus_recovery_info rinfo;
 };
 
 static void lpi2c_imx_intctrl(struct lpi2c_imx_struct *lpi2c_imx,
@@ -133,6 +134,8 @@ static int lpi2c_imx_bus_busy(struct lpi2c_imx_struct *lpi2c_imx)
 
 		if (time_after(jiffies, orig_jiffies + msecs_to_jiffies(500))) {
 			dev_dbg(&lpi2c_imx->adapter.dev, "bus not work\n");
+			if (lpi2c_imx->adapter.bus_recovery_info)
+				i2c_recover_bus(&lpi2c_imx->adapter);
 			return -ETIMEDOUT;
 		}
 		schedule();
@@ -190,6 +193,8 @@ static void lpi2c_imx_stop(struct lpi2c_imx_struct *lpi2c_imx)
 
 		if (time_after(jiffies, orig_jiffies + msecs_to_jiffies(500))) {
 			dev_dbg(&lpi2c_imx->adapter.dev, "stop timeout\n");
+			if (lpi2c_imx->adapter.bus_recovery_info)
+				i2c_recover_bus(&lpi2c_imx->adapter);
 			break;
 		}
 		schedule();
@@ -325,6 +330,8 @@ static int lpi2c_imx_txfifo_empty(struct lpi2c_imx_struct *lpi2c_imx)
 
 		if (time_after(jiffies, orig_jiffies + msecs_to_jiffies(500))) {
 			dev_dbg(&lpi2c_imx->adapter.dev, "txfifo empty timeout\n");
+			if (lpi2c_imx->adapter.bus_recovery_info)
+				i2c_recover_bus(&lpi2c_imx->adapter);
 			return -ETIMEDOUT;
 		}
 		schedule();
@@ -526,6 +533,20 @@ static irqreturn_t lpi2c_imx_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static int lpi2c_imx_init_recovery_info(struct lpi2c_imx_struct *lpi2c_imx,
+				  struct platform_device *pdev)
+{
+	struct i2c_bus_recovery_info *bri = &lpi2c_imx->rinfo;
+
+	bri->pinctrl = devm_pinctrl_get(&pdev->dev);
+	if (IS_ERR(bri->pinctrl))
+		return PTR_ERR(bri->pinctrl);
+
+	lpi2c_imx->adapter.bus_recovery_info = bri;
+
+	return 0;
+}
+
 static u32 lpi2c_imx_func(struct i2c_adapter *adapter)
 {
 	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
@@ -600,6 +621,12 @@ static int lpi2c_imx_probe(struct platform_device *pdev)
 	lpi2c_imx->txfifosize = 1 << (temp & 0x0f);
 	lpi2c_imx->rxfifosize = 1 << ((temp >> 8) & 0x0f);
 
+	/* Init optional bus recovery function */
+	ret = lpi2c_imx_init_recovery_info(lpi2c_imx, pdev);
+	/* Give it another chance if pinctrl used is not ready yet */
+	if (ret == -EPROBE_DEFER)
+		goto rpm_disable;
+
 	ret = i2c_add_adapter(&lpi2c_imx->adapter);
 	if (ret)
 		goto rpm_disable;
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 88a053987403..d6ba93fc7fee 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -212,10 +212,6 @@ struct imx_i2c_struct {
 	const struct imx_i2c_hwdata	*hwdata;
 	struct i2c_bus_recovery_info rinfo;
 
-	struct pinctrl *pinctrl;
-	struct pinctrl_state *pinctrl_pins_default;
-	struct pinctrl_state *pinctrl_pins_gpio;
-
 	struct imx_i2c_dma	*dma;
 	struct i2c_client	*slave;
 	enum i2c_slave_event last_slave_event;
@@ -1357,24 +1353,6 @@ static int i2c_imx_xfer_atomic(struct i2c_adapter *adapter,
 	return result;
 }
 
-static void i2c_imx_prepare_recovery(struct i2c_adapter *adap)
-{
-	struct imx_i2c_struct *i2c_imx;
-
-	i2c_imx = container_of(adap, struct imx_i2c_struct, adapter);
-
-	pinctrl_select_state(i2c_imx->pinctrl, i2c_imx->pinctrl_pins_gpio);
-}
-
-static void i2c_imx_unprepare_recovery(struct i2c_adapter *adap)
-{
-	struct imx_i2c_struct *i2c_imx;
-
-	i2c_imx = container_of(adap, struct imx_i2c_struct, adapter);
-
-	pinctrl_select_state(i2c_imx->pinctrl, i2c_imx->pinctrl_pins_default);
-}
-
 /*
  * We switch SCL and SDA to their GPIO function and do some bitbanging
  * for bus recovery. These alternative pinmux settings can be
@@ -1385,43 +1363,13 @@ static void i2c_imx_unprepare_recovery(struct i2c_adapter *adap)
 static int i2c_imx_init_recovery_info(struct imx_i2c_struct *i2c_imx,
 		struct platform_device *pdev)
 {
-	struct i2c_bus_recovery_info *rinfo = &i2c_imx->rinfo;
-
-	i2c_imx->pinctrl = devm_pinctrl_get(&pdev->dev);
-	if (!i2c_imx->pinctrl) {
-		dev_info(&pdev->dev, "pinctrl unavailable, bus recovery not supported\n");
-		return 0;
-	}
-	if (IS_ERR(i2c_imx->pinctrl)) {
-		dev_info(&pdev->dev, "can't get pinctrl, bus recovery not supported\n");
-		return PTR_ERR(i2c_imx->pinctrl);
-	}
-
-	i2c_imx->pinctrl_pins_default = pinctrl_lookup_state(i2c_imx->pinctrl,
-			PINCTRL_STATE_DEFAULT);
-	i2c_imx->pinctrl_pins_gpio = pinctrl_lookup_state(i2c_imx->pinctrl,
-			"gpio");
-	rinfo->sda_gpiod = devm_gpiod_get_optional(&pdev->dev, "sda", GPIOD_IN);
-	rinfo->scl_gpiod = devm_gpiod_get(&pdev->dev, "scl", GPIOD_OUT_HIGH_OPEN_DRAIN);
-
-	if (PTR_ERR(rinfo->sda_gpiod) == -EPROBE_DEFER ||
-	    PTR_ERR(rinfo->scl_gpiod) == -EPROBE_DEFER) {
-		return -EPROBE_DEFER;
-	} else if (IS_ERR(rinfo->sda_gpiod) ||
-		   IS_ERR(rinfo->scl_gpiod) ||
-		   IS_ERR(i2c_imx->pinctrl_pins_default) ||
-		   IS_ERR(i2c_imx->pinctrl_pins_gpio)) {
-		dev_dbg(&pdev->dev, "recovery information incomplete\n");
-		return 0;
-	}
+	struct i2c_bus_recovery_info *bri = &i2c_imx->rinfo;
 
-	dev_dbg(&pdev->dev, "using scl%s for recovery\n",
-		rinfo->sda_gpiod ? ",sda" : "");
+	bri->pinctrl = devm_pinctrl_get(&pdev->dev);
+	if (IS_ERR(bri->pinctrl))
+		return PTR_ERR(bri->pinctrl);
 
-	rinfo->prepare_recovery = i2c_imx_prepare_recovery;
-	rinfo->unprepare_recovery = i2c_imx_unprepare_recovery;
-	rinfo->recover_bus = i2c_generic_scl_recovery;
-	i2c_imx->adapter.bus_recovery_info = rinfo;
+	i2c_imx->adapter.bus_recovery_info = bri;
 
 	return 0;
 }
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index e4e4995ab224..8d73c0f405ed 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -30,8 +30,6 @@
 #include <asm/mpc85xx.h>
 #include <sysdev/fsl_soc.h>
 
-#define DRV_NAME "mpc-i2c"
-
 #define MPC_I2C_CLOCK_LEGACY   0
 #define MPC_I2C_CLOCK_PRESERVE (~0U)
 
@@ -844,16 +842,16 @@ static int fsl_i2c_probe(struct platform_device *op)
 			mpc_i2c_setup_8xxx(op->dev.of_node, i2c, clock);
 	}
 
-	/*
-	 * "fsl,timeout" has been marked as deprecated and, to maintain
-	 * backward compatibility, we will only look for it if
-	 * "i2c-scl-clk-low-timeout-us" is not present.
-	 */
+	/* Sadly, we have to support two deprecated bindings here */
 	result = of_property_read_u32(op->dev.of_node,
-				      "i2c-scl-clk-low-timeout-us",
+				      "i2c-transfer-timeout-us",
 				      &mpc_ops.timeout);
 	if (result == -EINVAL)
 		result = of_property_read_u32(op->dev.of_node,
+					      "i2c-scl-clk-low-timeout-us",
+					      &mpc_ops.timeout);
+	if (result == -EINVAL)
+		result = of_property_read_u32(op->dev.of_node,
 					      "fsl,timeout", &mpc_ops.timeout);
 
 	if (!result) {
@@ -960,7 +958,7 @@ static struct platform_driver mpc_i2c_driver = {
 	.probe		= fsl_i2c_probe,
 	.remove_new	= fsl_i2c_remove,
 	.driver = {
-		.name = DRV_NAME,
+		.name = "mpc-i2c",
 		.of_match_table = mpc_i2c_of_match,
 		.pm = &mpc_i2c_pm_ops,
 	},
diff --git a/drivers/i2c/busses/i2c-npcm7xx.c b/drivers/i2c/busses/i2c-npcm7xx.c
index 54181b3f1919..2fe68615942e 100644
--- a/drivers/i2c/busses/i2c-npcm7xx.c
+++ b/drivers/i2c/busses/i2c-npcm7xx.c
@@ -1264,9 +1264,6 @@ static int npcm_i2c_reg_slave(struct i2c_client *client)
 
 	bus->slave = client;
 
-	if (!bus->slave)
-		return -EINVAL;
-
 	if (client->flags & I2C_CLIENT_TEN)
 		return -EAFNOSUPPORT;
 
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 5adbe62cf621..c65ac3d7eadc 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -773,7 +773,7 @@ static int sh_mobile_i2c_r8a7740_workaround(struct sh_mobile_i2c_data *pd)
 	iic_wr(pd, ICCR, ICCR_TRS);
 	udelay(10);
 
-	return sh_mobile_i2c_init(pd);
+	return sh_mobile_i2c_v2_init(pd);
 }
 
 static const struct sh_mobile_dt_config default_dt_config = {
@@ -783,11 +783,6 @@ static const struct sh_mobile_dt_config default_dt_config = {
 
 static const struct sh_mobile_dt_config fast_clock_dt_config = {
 	.clks_per_count = 2,
-	.setup = sh_mobile_i2c_init,
-};
-
-static const struct sh_mobile_dt_config v2_freq_calc_dt_config = {
-	.clks_per_count = 2,
 	.setup = sh_mobile_i2c_v2_init,
 };
 
@@ -799,17 +794,17 @@ static const struct sh_mobile_dt_config r8a7740_dt_config = {
 static const struct of_device_id sh_mobile_i2c_dt_ids[] = {
 	{ .compatible = "renesas,iic-r8a73a4", .data = &fast_clock_dt_config },
 	{ .compatible = "renesas,iic-r8a7740", .data = &r8a7740_dt_config },
-	{ .compatible = "renesas,iic-r8a774c0", .data = &v2_freq_calc_dt_config },
-	{ .compatible = "renesas,iic-r8a7790", .data = &v2_freq_calc_dt_config },
-	{ .compatible = "renesas,iic-r8a7791", .data = &v2_freq_calc_dt_config },
-	{ .compatible = "renesas,iic-r8a7792", .data = &v2_freq_calc_dt_config },
-	{ .compatible = "renesas,iic-r8a7793", .data = &v2_freq_calc_dt_config },
-	{ .compatible = "renesas,iic-r8a7794", .data = &v2_freq_calc_dt_config },
-	{ .compatible = "renesas,iic-r8a7795", .data = &v2_freq_calc_dt_config },
-	{ .compatible = "renesas,iic-r8a77990", .data = &v2_freq_calc_dt_config },
+	{ .compatible = "renesas,iic-r8a774c0", .data = &fast_clock_dt_config },
+	{ .compatible = "renesas,iic-r8a7790", .data = &fast_clock_dt_config },
+	{ .compatible = "renesas,iic-r8a7791", .data = &fast_clock_dt_config },
+	{ .compatible = "renesas,iic-r8a7792", .data = &fast_clock_dt_config },
+	{ .compatible = "renesas,iic-r8a7793", .data = &fast_clock_dt_config },
+	{ .compatible = "renesas,iic-r8a7794", .data = &fast_clock_dt_config },
+	{ .compatible = "renesas,iic-r8a7795", .data = &fast_clock_dt_config },
+	{ .compatible = "renesas,iic-r8a77990", .data = &fast_clock_dt_config },
 	{ .compatible = "renesas,iic-sh73a0", .data = &fast_clock_dt_config },
-	{ .compatible = "renesas,rcar-gen2-iic", .data = &v2_freq_calc_dt_config },
-	{ .compatible = "renesas,rcar-gen3-iic", .data = &v2_freq_calc_dt_config },
+	{ .compatible = "renesas,rcar-gen2-iic", .data = &fast_clock_dt_config },
+	{ .compatible = "renesas,rcar-gen3-iic", .data = &fast_clock_dt_config },
 	{ .compatible = "renesas,rmobile-iic", .data = &default_dt_config },
 	{},
 };
diff --git a/drivers/i2c/busses/i2c-sprd.c b/drivers/i2c/busses/i2c-sprd.c
index c52d1bec60b4..28c88901d9bc 100644
--- a/drivers/i2c/busses/i2c-sprd.c
+++ b/drivers/i2c/busses/i2c-sprd.c
@@ -570,7 +570,7 @@ err_rpm_put:
 	return ret;
 }
 
-static int sprd_i2c_remove(struct platform_device *pdev)
+static void sprd_i2c_remove(struct platform_device *pdev)
 {
 	struct sprd_i2c *i2c_dev = platform_get_drvdata(pdev);
 	int ret;
@@ -586,8 +586,6 @@ static int sprd_i2c_remove(struct platform_device *pdev)
 
 	pm_runtime_put_noidle(i2c_dev->dev);
 	pm_runtime_disable(i2c_dev->dev);
-
-	return 0;
 }
 
 static int __maybe_unused sprd_i2c_suspend_noirq(struct device *dev)
@@ -645,7 +643,7 @@ MODULE_DEVICE_TABLE(of, sprd_i2c_of_match);
 
 static struct platform_driver sprd_i2c_driver = {
 	.probe = sprd_i2c_probe,
-	.remove = sprd_i2c_remove,
+	.remove_new = sprd_i2c_remove,
 	.driver = {
 		   .name = "sprd-i2c",
 		   .of_match_table = sprd_i2c_of_match,
diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c
index 2219062104fb..f5dfc33b97c0 100644
--- a/drivers/i2c/muxes/i2c-mux-pca954x.c
+++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
@@ -57,6 +57,20 @@
 
 #define PCA954X_IRQ_OFFSET 4
 
+/*
+ * MAX7357's configuration register is writeable after POR, but
+ * can be locked by setting the basic mode bit. MAX7358 configuration
+ * register is locked by default and needs to be unlocked first.
+ * The configuration register holds the following settings:
+ */
+#define MAX7357_CONF_INT_ENABLE			BIT(0)
+#define MAX7357_CONF_FLUSH_OUT			BIT(1)
+#define MAX7357_CONF_RELEASE_INT		BIT(2)
+#define MAX7357_CONF_DISCON_SINGLE_CHAN		BIT(4)
+#define MAX7357_CONF_PRECONNECT_TEST		BIT(7)
+
+#define MAX7357_POR_DEFAULT_CONF		MAX7357_CONF_INT_ENABLE
+
 enum pca_type {
 	max_7356,
 	max_7357,
@@ -470,7 +484,34 @@ static int pca954x_init(struct i2c_client *client, struct pca954x *data)
 	else
 		data->last_chan = 0; /* Disconnect multiplexer */
 
-	ret = i2c_smbus_write_byte(client, data->last_chan);
+	if (device_is_compatible(&client->dev, "maxim,max7357")) {
+		if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) {
+			u8 conf = MAX7357_POR_DEFAULT_CONF;
+			/*
+			 * The interrupt signal is shared with the reset pin. Release the
+			 * interrupt after 1.6 seconds to allow using the pin as reset.
+			 */
+			conf |= MAX7357_CONF_RELEASE_INT;
+
+			if (device_property_read_bool(&client->dev, "maxim,isolate-stuck-channel"))
+				conf |= MAX7357_CONF_DISCON_SINGLE_CHAN;
+			if (device_property_read_bool(&client->dev,
+						      "maxim,send-flush-out-sequence"))
+				conf |= MAX7357_CONF_FLUSH_OUT;
+			if (device_property_read_bool(&client->dev,
+						      "maxim,preconnection-wiggle-test-enable"))
+				conf |= MAX7357_CONF_PRECONNECT_TEST;
+
+			ret = i2c_smbus_write_byte_data(client, data->last_chan, conf);
+		} else {
+			dev_warn(&client->dev, "Write byte data not supported."
+				 "Cannot enable enhanced mode features\n");
+			ret = i2c_smbus_write_byte(client, data->last_chan);
+		}
+	} else {
+		ret = i2c_smbus_write_byte(client, data->last_chan);
+	}
+
 	if (ret < 0)
 		data->last_chan = 0;