Merge tag 'i2c-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:
 "I2C has largely driver updates for 6.7, i.e. feature additions (like
  adding transfers while in atomic mode), using new helpers (like
  devm_clk_get_enabled), new IDs, documentation fixes and additions...
  you name it.

  The core got a memleak fix and better support for nested muxes"

* tag 'i2c-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (53 commits)
  i2c: s3c2410: make i2c_s3c_irq_nextbyte() void
  i2c: qcom-geni: add ACPI device id for sc8180x
  Documentation: i2c: add fault code for not supporting 10 bit addresses
  i2c: sun6i-p2wi: Prevent potential division by zero
  i2c: mux: demux-pinctrl: Convert to use sysfs_emit_at() API
  i2c: i801: Use new helper acpi_use_parent_companion
  ACPI: Add helper acpi_use_parent_companion
  MAINTAINERS: add YAML file for i2c-demux-pinctrl
  i2c: core: fix lockdep warning for sparsely nested adapter chain
  i2c: axxia: eliminate kernel-doc warnings
  dt-bindings: i2c: i2c-demux-pinctrl: Convert to json-schema
  i2c: stm32f7: Use devm_clk_get_enabled()
  i2c: stm32f4: Use devm_clk_get_enabled()
  i2c: stm32f7: add description of atomic in struct stm32f7_i2c_dev
  i2c: fix memleak in i2c_new_client_device()
  i2c: exynos5: Calculate t_scl_l, t_scl_h according to i2c spec
  i2c: i801: Simplify class-based client device instantiation
  i2c: exynos5: add support for atomic transfers
  i2c: at91-core: Use devm_clk_get_enabled()
  eeprom: at24: add ST M24C64-D Additional Write lockable page support
  ...

25 files changed, 394 insertions, 261 deletions

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index fd887f767675..28eb48dd5b32 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -158,6 +158,7 @@ config I2C_I801
 	    Alder Lake (PCH)
 	    Raptor Lake (PCH)
 	    Meteor Lake (SOC and PCH)
+	    Birch Stream (SOC)
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.
diff --git a/drivers/i2c/busses/i2c-at91-core.c b/drivers/i2c/busses/i2c-at91-core.c
index db45554327ae..dc52b3530725 100644
--- a/drivers/i2c/busses/i2c-at91-core.c
+++ b/drivers/i2c/busses/i2c-at91-core.c
@@ -221,11 +221,10 @@ static int at91_twi_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, dev);
 
-	dev->clk = devm_clk_get(dev->dev, NULL);
+	dev->clk = devm_clk_get_enabled(dev->dev, NULL);
 	if (IS_ERR(dev->clk))
-		return dev_err_probe(dev->dev, PTR_ERR(dev->clk), "no clock defined\n");
-
-	clk_prepare_enable(dev->clk);
+		return dev_err_probe(dev->dev, PTR_ERR(dev->clk),
+				     "failed to enable clock\n");
 
 	snprintf(dev->adapter.name, sizeof(dev->adapter.name), "AT91");
 	i2c_set_adapdata(&dev->adapter, dev);
@@ -254,8 +253,6 @@ static int at91_twi_probe(struct platform_device *pdev)
 
 	rc = i2c_add_numbered_adapter(&dev->adapter);
 	if (rc) {
-		clk_disable_unprepare(dev->clk);
-
 		pm_runtime_disable(dev->dev);
 		pm_runtime_set_suspended(dev->dev);
 
@@ -272,7 +269,6 @@ static void at91_twi_remove(struct platform_device *pdev)
 	struct at91_twi_dev *dev = platform_get_drvdata(pdev);
 
 	i2c_del_adapter(&dev->adapter);
-	clk_disable_unprepare(dev->clk);
 
 	pm_runtime_disable(dev->dev);
 	pm_runtime_set_suspended(dev->dev);
diff --git a/drivers/i2c/busses/i2c-axxia.c b/drivers/i2c/busses/i2c-axxia.c
index d7f1e98777ac..a66f7f67b3b8 100644
--- a/drivers/i2c/busses/i2c-axxia.c
+++ b/drivers/i2c/busses/i2c-axxia.c
@@ -131,6 +131,8 @@
  * @i2c_clk: clock reference for i2c input clock
  * @bus_clk_rate: current i2c bus clock rate
  * @last: a flag indicating is this is last message in transfer
+ * @slave: associated &i2c_client
+ * @irq: platform device IRQ number
  */
 struct axxia_i2c_dev {
 	void __iomem *base;
@@ -165,7 +167,7 @@ static void i2c_int_enable(struct axxia_i2c_dev *idev, u32 mask)
 	writel(int_en | mask, idev->base + MST_INT_ENABLE);
 }
 
-/**
+/*
  * ns_to_clk - Convert time (ns) to clock cycles for the given clock frequency.
  */
 static u32 ns_to_clk(u64 ns, u32 clk_mhz)
@@ -263,7 +265,7 @@ static int i2c_m_recv_len(const struct i2c_msg *msg)
 	return (msg->flags & I2C_M_RECV_LEN) != 0;
 }
 
-/**
+/*
  * axxia_i2c_empty_rx_fifo - Fetch data from RX FIFO and update SMBus block
  * transfer length if this is the first byte of such a transfer.
  */
@@ -295,7 +297,7 @@ static int axxia_i2c_empty_rx_fifo(struct axxia_i2c_dev *idev)
 	return 0;
 }
 
-/**
+/*
  * axxia_i2c_fill_tx_fifo - Fill TX FIFO from current message buffer.
  * @return: Number of bytes left to transfer.
  */
diff --git a/drivers/i2c/busses/i2c-brcmstb.c b/drivers/i2c/busses/i2c-brcmstb.c
index acee76732544..38f276c99193 100644
--- a/drivers/i2c/busses/i2c-brcmstb.c
+++ b/drivers/i2c/busses/i2c-brcmstb.c
@@ -160,6 +160,7 @@ struct brcmstb_i2c_dev {
 	struct completion done;
 	u32 clk_freq_hz;
 	int data_regsz;
+	bool atomic;
 };
 
 /* register accessors for both be and le cpu arch */
@@ -240,7 +241,7 @@ static int brcmstb_i2c_wait_for_completion(struct brcmstb_i2c_dev *dev)
 	int ret = 0;
 	unsigned long timeout = msecs_to_jiffies(I2C_TIMEOUT);
 
-	if (dev->irq >= 0) {
+	if (dev->irq >= 0 && !dev->atomic) {
 		if (!wait_for_completion_timeout(&dev->done, timeout))
 			ret = -ETIMEDOUT;
 	} else {
@@ -287,7 +288,7 @@ static int brcmstb_send_i2c_cmd(struct brcmstb_i2c_dev *dev,
 		return rc;
 
 	/* only if we are in interrupt mode */
-	if (dev->irq >= 0)
+	if (dev->irq >= 0 && !dev->atomic)
 		reinit_completion(&dev->done);
 
 	/* enable BSC CTL interrupt line */
@@ -520,6 +521,23 @@ out:
 
 }
 
+static int brcmstb_i2c_xfer_atomic(struct i2c_adapter *adapter,
+				   struct i2c_msg msgs[], int num)
+{
+	struct brcmstb_i2c_dev *dev = i2c_get_adapdata(adapter);
+	int ret;
+
+	if (dev->irq >= 0)
+		disable_irq(dev->irq);
+	dev->atomic = true;
+	ret = brcmstb_i2c_xfer(adapter, msgs, num);
+	dev->atomic = false;
+	if (dev->irq >= 0)
+		enable_irq(dev->irq);
+
+	return ret;
+}
+
 static u32 brcmstb_i2c_functionality(struct i2c_adapter *adap)
 {
 	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR
@@ -528,6 +546,7 @@ static u32 brcmstb_i2c_functionality(struct i2c_adapter *adap)
 
 static const struct i2c_algorithm brcmstb_i2c_algo = {
 	.master_xfer = brcmstb_i2c_xfer,
+	.master_xfer_atomic = brcmstb_i2c_xfer_atomic,
 	.functionality = brcmstb_i2c_functionality,
 };
 
diff --git a/drivers/i2c/busses/i2c-cp2615.c b/drivers/i2c/busses/i2c-cp2615.c
index 3ded28632e4c..20f8f7c9a8cd 100644
--- a/drivers/i2c/busses/i2c-cp2615.c
+++ b/drivers/i2c/busses/i2c-cp2615.c
@@ -298,7 +298,7 @@ cp2615_i2c_probe(struct usb_interface *usbif, const struct usb_device_id *id)
 	if (!adap)
 		return -ENOMEM;
 
-	strncpy(adap->name, usbdev->serial, sizeof(adap->name) - 1);
+	strscpy(adap->name, usbdev->serial, sizeof(adap->name));
 	adap->owner = THIS_MODULE;
 	adap->dev.parent = &usbif->dev;
 	adap->dev.of_node = usbif->dev.of_node;
diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c
index 2b0b9cdffa86..385ef9d9e4d4 100644
--- a/drivers/i2c/busses/i2c-exynos5.c
+++ b/drivers/i2c/busses/i2c-exynos5.c
@@ -194,6 +194,11 @@ struct exynos5_i2c {
 	 */
 	int			trans_done;
 
+	/*
+	 * Called from atomic context, don't use interrupts.
+	 */
+	unsigned int		atomic;
+
 	/* Controller operating frequency */
 	unsigned int		op_clock;
 
@@ -265,7 +270,7 @@ static void exynos5_i2c_clr_pend_irq(struct exynos5_i2c *i2c)
  * exynos5_i2c_set_timing: updates the registers with appropriate
  * timing values calculated
  *
- * Timing values for operation are calculated against either 100kHz
+ * Timing values for operation are calculated against 100kHz, 400kHz
  * or 1MHz controller operating frequency.
  *
  * Returns 0 on success, -EINVAL if the cycle length cannot
@@ -328,6 +333,23 @@ static int exynos5_i2c_set_timing(struct exynos5_i2c *i2c, bool hs_timings)
 	 *
 	 * Constraints: 4 <= temp, 0 <= CLK_DIV < 256, 2 <= clk_cycle <= 510
 	 *
+	 * To split SCL clock into low, high periods appropriately, one
+	 * proportion factor for each I2C mode is used, which is calculated
+	 * using this formula.
+	 * ```
+	 * ((t_low_min + (scl_clock - t_low_min - t_high_min) / 2) / scl_clock)
+	 * ```
+	 * where:
+	 * t_low_min is the minimal value of low period of the SCL clock in us;
+	 * t_high_min is the minimal value of high period of the SCL clock in us;
+	 * scl_clock is converted from SCL clock frequency into us.
+	 *
+	 * Below are the proportion factors for these I2C modes:
+	 *                t_low_min, t_high_min, scl_clock, proportion
+	 * Standard Mode:     4.7us,      4.0us,      10us,      0.535
+	 * Fast Mode:         1.3us,      0.6us,     2.5us,       0.64
+	 * Fast-Plus Mode:    0.5us,     0.26us,       1us,       0.62
+	 *
 	 */
 	t_ftl_cycle = (readl(i2c->regs + HSI2C_CONF) >> 16) & 0x7;
 	temp = clkin / op_clk - 8 - t_ftl_cycle;
@@ -341,8 +363,19 @@ static int exynos5_i2c_set_timing(struct exynos5_i2c *i2c, bool hs_timings)
 		return -EINVAL;
 	}
 
-	t_scl_l = clk_cycle / 2;
-	t_scl_h = clk_cycle / 2;
+	/*
+	 * Scale clk_cycle to get t_scl_l using the proption factors for individual I2C modes.
+	 */
+	if (op_clk <= I2C_MAX_STANDARD_MODE_FREQ)
+		t_scl_l = clk_cycle * 535 / 1000;
+	else if (op_clk <= I2C_MAX_FAST_MODE_FREQ)
+		t_scl_l = clk_cycle * 64 / 100;
+	else
+		t_scl_l = clk_cycle * 62 / 100;
+
+	if (t_scl_l > 0xFF)
+		t_scl_l = 0xFF;
+	t_scl_h = clk_cycle - t_scl_l;
 	t_start_su = t_scl_l;
 	t_start_hd = t_scl_l;
 	t_stop_su = t_scl_l;
@@ -711,6 +744,22 @@ static void exynos5_i2c_message_start(struct exynos5_i2c *i2c, int stop)
 	spin_unlock_irqrestore(&i2c->lock, flags);
 }
 
+static bool exynos5_i2c_poll_irqs_timeout(struct exynos5_i2c *i2c,
+					  unsigned long timeout)
+{
+	unsigned long time_left = jiffies + timeout;
+
+	while (time_before(jiffies, time_left) &&
+	       !((i2c->trans_done && (i2c->msg->len == i2c->msg_ptr)) ||
+	         (i2c->state < 0))) {
+		while (readl(i2c->regs + HSI2C_INT_ENABLE) &
+		       readl(i2c->regs + HSI2C_INT_STATUS))
+			exynos5_i2c_irq(i2c->irq, i2c);
+		usleep_range(100, 200);
+	}
+	return time_before(jiffies, time_left);
+}
+
 static int exynos5_i2c_xfer_msg(struct exynos5_i2c *i2c,
 			      struct i2c_msg *msgs, int stop)
 {
@@ -725,8 +774,13 @@ static int exynos5_i2c_xfer_msg(struct exynos5_i2c *i2c,
 
 	exynos5_i2c_message_start(i2c, stop);
 
-	timeout = wait_for_completion_timeout(&i2c->msg_complete,
-					      EXYNOS5_I2C_TIMEOUT);
+	if (!i2c->atomic)
+		timeout = wait_for_completion_timeout(&i2c->msg_complete,
+						      EXYNOS5_I2C_TIMEOUT);
+	else
+		timeout = exynos5_i2c_poll_irqs_timeout(i2c,
+							EXYNOS5_I2C_TIMEOUT);
+
 	if (timeout == 0)
 		ret = -ETIMEDOUT;
 	else
@@ -777,6 +831,21 @@ err_pclk:
 	return ret ?: num;
 }
 
+static int exynos5_i2c_xfer_atomic(struct i2c_adapter *adap,
+				   struct i2c_msg *msgs, int num)
+{
+	struct exynos5_i2c *i2c = adap->algo_data;
+	int ret;
+
+	disable_irq(i2c->irq);
+	i2c->atomic = true;
+	ret = exynos5_i2c_xfer(adap, msgs, num);
+	i2c->atomic = false;
+	enable_irq(i2c->irq);
+
+	return ret;
+}
+
 static u32 exynos5_i2c_func(struct i2c_adapter *adap)
 {
 	return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
@@ -784,6 +853,7 @@ static u32 exynos5_i2c_func(struct i2c_adapter *adap)
 
 static const struct i2c_algorithm exynos5_i2c_algorithm = {
 	.master_xfer		= exynos5_i2c_xfer,
+	.master_xfer_atomic	= exynos5_i2c_xfer_atomic,
 	.functionality		= exynos5_i2c_func,
 };
 
diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c
index e5a5b9e8bf2c..fb35a75fe0e3 100644
--- a/drivers/i2c/busses/i2c-gpio.c
+++ b/drivers/i2c/busses/i2c-gpio.c
@@ -263,15 +263,10 @@ static void i2c_gpio_fault_injector_init(struct platform_device *pdev)
 	 * 'fault-injector' dir there. Until then, we have a global dir with
 	 * all adapters as subdirs.
 	 */
-	if (!i2c_gpio_debug_dir) {
+	if (!i2c_gpio_debug_dir)
 		i2c_gpio_debug_dir = debugfs_create_dir("i2c-fault-injector", NULL);
-		if (!i2c_gpio_debug_dir)
-			return;
-	}
 
 	priv->debug_dir = debugfs_create_dir(pdev->name, i2c_gpio_debug_dir);
-	if (!priv->debug_dir)
-		return;
 
 	init_completion(&priv->scl_irq_completion);
 
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 1d855258a45d..070999139c6d 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -79,6 +79,7 @@
  * Meteor Lake-P (SOC)		0x7e22	32	hard	yes	yes	yes
  * Meteor Lake SoC-S (SOC)	0xae22	32	hard	yes	yes	yes
  * Meteor Lake PCH-S (PCH)	0x7f23	32	hard	yes	yes	yes
+ * Birch Stream (SOC)		0x5796	32	hard	yes	yes	yes
  *
  * Features supported by this driver:
  * Software PEC				no
@@ -231,6 +232,7 @@
 #define PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS		0x4da3
 #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_P_SMBUS		0x51a3
 #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_M_SMBUS		0x54a3
+#define PCI_DEVICE_ID_INTEL_BIRCH_STREAM_SMBUS		0x5796
 #define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS		0x5ad4
 #define PCI_DEVICE_ID_INTEL_RAPTOR_LAKE_S_SMBUS		0x7a23
 #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_S_SMBUS		0x7aa3
@@ -285,7 +287,6 @@ struct i801_priv {
 	u8 *data;
 
 #if IS_ENABLED(CONFIG_I2C_MUX_GPIO) && defined CONFIG_DMI
-	const struct i801_mux_config *mux_drvdata;
 	struct platform_device *mux_pdev;
 	struct gpiod_lookup_table *lookup;
 #endif
@@ -293,10 +294,9 @@ struct i801_priv {
 
 	/*
 	 * If set to true the host controller registers are reserved for
-	 * ACPI AML use. Protected by acpi_lock.
+	 * ACPI AML use.
 	 */
 	bool acpi_reserved;
-	struct mutex acpi_lock;
 };
 
 #define FEATURE_SMBUS_PEC	BIT(0)
@@ -679,15 +679,11 @@ static int i801_block_transaction_byte_by_byte(struct i801_priv *priv,
 		return result ? priv->status : -ETIMEDOUT;
 	}
 
-	for (i = 1; i <= len; i++) {
-		if (i == len && read_write == I2C_SMBUS_READ)
-			smbcmd |= SMBHSTCNT_LAST_BYTE;
-		outb_p(smbcmd, SMBHSTCNT(priv));
-
-		if (i == 1)
-			outb_p(inb(SMBHSTCNT(priv)) | SMBHSTCNT_START,
-			       SMBHSTCNT(priv));
+	if (len == 1 && read_write == I2C_SMBUS_READ)
+		smbcmd |= SMBHSTCNT_LAST_BYTE;
+	outb_p(smbcmd | SMBHSTCNT_START, SMBHSTCNT(priv));
 
+	for (i = 1; i <= len; i++) {
 		status = i801_wait_byte_done(priv);
 		if (status)
 			return status;
@@ -710,9 +706,12 @@ static int i801_block_transaction_byte_by_byte(struct i801_priv *priv,
 			data->block[0] = len;
 		}
 
-		/* Retrieve/store value in SMBBLKDAT */
-		if (read_write == I2C_SMBUS_READ)
+		if (read_write == I2C_SMBUS_READ) {
 			data->block[i] = inb_p(SMBBLKDAT(priv));
+			if (i == len - 1)
+				outb_p(smbcmd | SMBHSTCNT_LAST_BYTE, SMBHSTCNT(priv));
+		}
+
 		if (read_write == I2C_SMBUS_WRITE && i+1 <= len)
 			outb_p(data->block[i+1], SMBBLKDAT(priv));
 
@@ -875,11 +874,8 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr,
 	int hwpec, ret;
 	struct i801_priv *priv = i2c_get_adapdata(adap);
 
-	mutex_lock(&priv->acpi_lock);
-	if (priv->acpi_reserved) {
-		mutex_unlock(&priv->acpi_lock);
+	if (priv->acpi_reserved)
 		return -EBUSY;
-	}
 
 	pm_runtime_get_sync(&priv->pci_dev->dev);
 
@@ -920,7 +916,6 @@ out:
 
 	pm_runtime_mark_last_busy(&priv->pci_dev->dev);
 	pm_runtime_put_autosuspend(&priv->pci_dev->dev);
-	mutex_unlock(&priv->acpi_lock);
 	return ret;
 }
 
@@ -1044,6 +1039,7 @@ static const struct pci_device_id i801_ids[] = {
 	{ PCI_DEVICE_DATA(INTEL, METEOR_LAKE_P_SMBUS,		FEATURES_ICH5 | FEATURE_TCO_CNL) },
 	{ PCI_DEVICE_DATA(INTEL, METEOR_LAKE_SOC_S_SMBUS,	FEATURES_ICH5 | FEATURE_TCO_CNL) },
 	{ PCI_DEVICE_DATA(INTEL, METEOR_LAKE_PCH_S_SMBUS,	FEATURES_ICH5 | FEATURE_TCO_CNL) },
+	{ PCI_DEVICE_DATA(INTEL, BIRCH_STREAM_SMBUS,		FEATURES_ICH5 | FEATURE_TCO_CNL) },
 	{ 0, }
 };
 
@@ -1288,7 +1284,7 @@ static void i801_probe_optional_slaves(struct i801_priv *priv)
 
 	/* Instantiate SPD EEPROMs unless the SMBus is multiplexed */
 #if IS_ENABLED(CONFIG_I2C_MUX_GPIO)
-	if (!priv->mux_drvdata)
+	if (!priv->mux_pdev)
 #endif
 		i2c_register_spd(&priv->adapter);
 }
@@ -1390,11 +1386,14 @@ static void i801_add_mux(struct i801_priv *priv)
 	const struct i801_mux_config *mux_config;
 	struct i2c_mux_gpio_platform_data gpio_data;
 	struct gpiod_lookup_table *lookup;
+	const struct dmi_system_id *id;
 	int i;
 
-	if (!priv->mux_drvdata)
+	id = dmi_first_match(mux_dmi_table);
+	if (!id)
 		return;
-	mux_config = priv->mux_drvdata;
+
+	mux_config = id->driver_data;
 
 	/* Prepare the platform data */
 	memset(&gpio_data, 0, sizeof(struct i2c_mux_gpio_platform_data));
@@ -1438,35 +1437,9 @@ static void i801_del_mux(struct i801_priv *priv)
 	platform_device_unregister(priv->mux_pdev);
 	gpiod_remove_lookup_table(priv->lookup);
 }
-
-static unsigned int i801_get_adapter_class(struct i801_priv *priv)
-{
-	const struct dmi_system_id *id;
-	const struct i801_mux_config *mux_config;
-	unsigned int class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
-	int i;
-
-	id = dmi_first_match(mux_dmi_table);
-	if (id) {
-		/* Remove branch classes from trunk */
-		mux_config = id->driver_data;
-		for (i = 0; i < mux_config->n_values; i++)
-			class &= ~mux_config->classes[i];
-
-		/* Remember for later */
-		priv->mux_drvdata = mux_config;
-	}
-
-	return class;
-}
 #else
 static inline void i801_add_mux(struct i801_priv *priv) { }
 static inline void i801_del_mux(struct i801_priv *priv) { }
-
-static inline unsigned int i801_get_adapter_class(struct i801_priv *priv)
-{
-	return I2C_CLASS_HWMON | I2C_CLASS_SPD;
-}
 #endif
 
 static struct platform_device *
@@ -1572,7 +1545,7 @@ i801_acpi_io_handler(u32 function, acpi_physical_address address, u32 bits,
 	 * further access from the driver itself. This device is now owned
 	 * by the system firmware.
 	 */
-	mutex_lock(&priv->acpi_lock);
+	i2c_lock_bus(&priv->adapter, I2C_LOCK_SEGMENT);
 
 	if (!priv->acpi_reserved && i801_acpi_is_smbus_ioport(priv, address)) {
 		priv->acpi_reserved = true;
@@ -1592,7 +1565,7 @@ i801_acpi_io_handler(u32 function, acpi_physical_address address, u32 bits,
 	else
 		status = acpi_os_write_port(address, (u32)*value, bits);
 
-	mutex_unlock(&priv->acpi_lock);
+	i2c_unlock_bus(&priv->adapter, I2C_LOCK_SEGMENT);
 
 	return status;
 }
@@ -1630,6 +1603,12 @@ static void i801_setup_hstcfg(struct i801_priv *priv)
 	pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hstcfg);
 }
 
+static void i801_restore_regs(struct i801_priv *priv)
+{
+	outb_p(priv->original_hstcnt, SMBHSTCNT(priv));
+	pci_write_config_byte(priv->pci_dev, SMBHSTCFG, priv->original_hstcfg);
+}
+
 static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	int err, i;
@@ -1641,12 +1620,11 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 
 	i2c_set_adapdata(&priv->adapter, priv);
 	priv->adapter.owner = THIS_MODULE;
-	priv->adapter.class = i801_get_adapter_class(priv);
+	priv->adapter.class = I2C_CLASS_HWMON;
 	priv->adapter.algo = &smbus_algorithm;
 	priv->adapter.dev.parent = &dev->dev;
-	ACPI_COMPANION_SET(&priv->adapter.dev, ACPI_COMPANION(&dev->dev));
+	acpi_use_parent_companion(&priv->adapter.dev);
 	priv->adapter.retries = 3;
-	mutex_init(&priv->acpi_lock);
 
 	priv->pci_dev = dev;
 	priv->features = id->driver_data;
@@ -1756,6 +1734,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	if (err) {
 		platform_device_unregister(priv->tco_pdev);
 		i801_acpi_remove(priv);
+		i801_restore_regs(priv);
 		return err;
 	}
 
@@ -1780,12 +1759,10 @@ static void i801_remove(struct pci_dev *dev)
 {
 	struct i801_priv *priv = pci_get_drvdata(dev);
 
-	outb_p(priv->original_hstcnt, SMBHSTCNT(priv));
 	i801_disable_host_notify(priv);
 	i801_del_mux(priv);
 	i2c_del_adapter(&priv->adapter);
 	i801_acpi_remove(priv);
-	pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
 
 	platform_device_unregister(priv->tco_pdev);
 
@@ -1793,6 +1770,8 @@ static void i801_remove(struct pci_dev *dev)
 	if (!priv->acpi_reserved)
 		pm_runtime_get_noresume(&dev->dev);
 
+	i801_restore_regs(priv);
+
 	/*
 	 * do not call pci_disable_device(dev) since it can cause hard hangs on
 	 * some systems during power-off (eg. Fujitsu-Siemens Lifebook E8010)
@@ -1803,18 +1782,18 @@ static void i801_shutdown(struct pci_dev *dev)
 {
 	struct i801_priv *priv = pci_get_drvdata(dev);
 
-	/* Restore config registers to avoid hard hang on some systems */
-	outb_p(priv->original_hstcnt, SMBHSTCNT(priv));
 	i801_disable_host_notify(priv);
-	pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
+	/* Restore config registers to avoid hard hang on some systems */
+	i801_restore_regs(priv);
 }
 
 static int i801_suspend(struct device *dev)
 {
 	struct i801_priv *priv = dev_get_drvdata(dev);
 
-	outb_p(priv->original_hstcnt, SMBHSTCNT(priv));
-	pci_write_config_byte(priv->pci_dev, SMBHSTCFG, priv->original_hstcfg);
+	i2c_mark_adapter_suspended(&priv->adapter);
+	i801_restore_regs(priv);
+
 	return 0;
 }
 
@@ -1824,6 +1803,7 @@ static int i801_resume(struct device *dev)
 
 	i801_setup_hstcfg(priv);
 	i801_enable_host_notify(&priv->adapter);
+	i2c_mark_adapter_resumed(&priv->adapter);
 
 	return 0;
 }
@@ -1842,16 +1822,11 @@ static struct pci_driver i801_driver = {
 	},
 };
 
-static int __init i2c_i801_init(void)
+static int __init i2c_i801_init(struct pci_driver *drv)
 {
 	if (dmi_name_in_vendors("FUJITSU"))
 		input_apanel_init();
-	return pci_register_driver(&i801_driver);
-}
-
-static void __exit i2c_i801_exit(void)
-{
-	pci_unregister_driver(&i801_driver);
+	return pci_register_driver(drv);
 }
 
 MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>");
@@ -1859,5 +1834,4 @@ MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>");
 MODULE_DESCRIPTION("I801 SMBus driver");
 MODULE_LICENSE("GPL");
 
-module_init(i2c_i801_init);
-module_exit(i2c_i801_exit);
+module_driver(i801_driver, i2c_i801_init, pci_unregister_driver);
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 1a9b5a068ef1..a8b5719c3372 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -1442,15 +1442,19 @@ static int mtk_i2c_probe(struct platform_device *pdev)
 	if (IS_ERR(i2c->clocks[I2C_MT65XX_CLK_ARB].clk))
 		return PTR_ERR(i2c->clocks[I2C_MT65XX_CLK_ARB].clk);
 
+	i2c->clocks[I2C_MT65XX_CLK_PMIC].clk = devm_clk_get_optional(&pdev->dev, "pmic");
+	if (IS_ERR(i2c->clocks[I2C_MT65XX_CLK_PMIC].clk)) {
+		dev_err(&pdev->dev, "cannot get pmic clock\n");
+		return PTR_ERR(i2c->clocks[I2C_MT65XX_CLK_PMIC].clk);
+	}
+
 	if (i2c->have_pmic) {
-		i2c->clocks[I2C_MT65XX_CLK_PMIC].clk = devm_clk_get(&pdev->dev, "pmic");
-		if (IS_ERR(i2c->clocks[I2C_MT65XX_CLK_PMIC].clk)) {
+		if (!i2c->clocks[I2C_MT65XX_CLK_PMIC].clk) {
 			dev_err(&pdev->dev, "cannot get pmic clock\n");
-			return PTR_ERR(i2c->clocks[I2C_MT65XX_CLK_PMIC].clk);
+			return -ENODEV;
 		}
 		speed_clk = I2C_MT65XX_CLK_PMIC;
 	} else {
-		i2c->clocks[I2C_MT65XX_CLK_PMIC].clk = NULL;
 		speed_clk = I2C_MT65XX_CLK_MAIN;
 	}
 
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index fd8403b07fa6..dc160cbc3155 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -19,11 +19,10 @@
 #include <linux/platform_device.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/pm_runtime.h>
+#include <linux/property.h>
 #include <linux/reset.h>
 #include <linux/io.h>
 #include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/of_irq.h>
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/delay.h>
@@ -859,7 +858,7 @@ static int
 mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
 		  struct device *dev)
 {
-	const struct of_device_id *device;
+	const struct mv64xxx_i2c_regs *data;
 	struct device_node *np = dev->of_node;
 	u32 bus_freq, tclk;
 	int rc = 0;
@@ -897,11 +896,11 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
 	 */
 	drv_data->adapter.timeout = HZ;
 
-	device = of_match_device(mv64xxx_i2c_of_match_table, dev);
-	if (!device)
+	data = device_get_match_data(dev);
+	if (!data)
 		return -ENODEV;
 
-	memcpy(&drv_data->reg_offsets, device->data, sizeof(drv_data->reg_offsets));
+	memcpy(&drv_data->reg_offsets, data, sizeof(drv_data->reg_offsets));
 
 	/*
 	 * For controllers embedded in new SoCs activate the
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 58fd6fa3edf1..42165ef57946 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -25,11 +25,11 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/of.h>
-#include <linux/of_device.h>
 #include <linux/slab.h>
 #include <linux/platform_data/i2c-omap.h>
 #include <linux/pm_runtime.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/property.h>
 
 /* I2C controller revisions */
 #define OMAP_I2C_OMAP1_REV_2		0x20
@@ -1358,7 +1358,6 @@ omap_i2c_probe(struct platform_device *pdev)
 	const struct omap_i2c_bus_platform_data *pdata =
 		dev_get_platdata(&pdev->dev);
 	struct device_node	*node = pdev->dev.of_node;
-	const struct of_device_id *match;
 	int irq;
 	int r;
 	u32 rev;
@@ -1376,11 +1375,10 @@ omap_i2c_probe(struct platform_device *pdev)
 	if (IS_ERR(omap->base))
 		return PTR_ERR(omap->base);
 
-	match = of_match_device(of_match_ptr(omap_i2c_of_match), &pdev->dev);
-	if (match) {
+	if (pdev->dev.of_node) {
 		u32 freq = I2C_MAX_STANDARD_MODE_FREQ;
 
-		pdata = match->data;
+		pdata = device_get_match_data(&pdev->dev);
 		omap->flags = pdata->flags;
 
 		of_property_read_u32(node, "clock-frequency", &freq);
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
index 4996a628fdae..8e57ebe595be 100644
--- a/drivers/i2c/busses/i2c-powermac.c
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -231,7 +231,7 @@ static void i2c_powermac_create_one(struct i2c_adapter *adap,
 	struct i2c_board_info info = {};
 	struct i2c_client *newdev;
 
-	strncpy(info.type, type, sizeof(info.type));
+	strscpy(info.type, type, sizeof(info.type));
 	info.addr = addr;
 	newdev = i2c_new_client_device(adap, &info);
 	if (IS_ERR(newdev))
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index 29be05af826b..1d7648242749 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -32,6 +32,7 @@
 #include <linux/pinctrl/consumer.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/i2c-pxa.h>
+#include <linux/property.h>
 #include <linux/slab.h>
 
 /* I2C register field definitions */
@@ -1252,10 +1253,8 @@ static int i2c_pxa_probe_dt(struct platform_device *pdev, struct pxa_i2c *i2c,
 			    enum pxa_i2c_types *i2c_types)
 {
 	struct device_node *np = pdev->dev.of_node;
-	const struct of_device_id *of_id =
-			of_match_device(i2c_pxa_dt_ids, &pdev->dev);
 
-	if (!of_id)
+	if (!pdev->dev.of_node)
 		return 1;
 
 	/* For device tree we always use the dynamic or alias-assigned ID */
@@ -1264,7 +1263,7 @@ static int i2c_pxa_probe_dt(struct platform_device *pdev, struct pxa_i2c *i2c,
 	i2c->use_pio = of_property_read_bool(np, "mrvl,i2c-polling");
 	i2c->fast_mode = of_property_read_bool(np, "mrvl,i2c-fast-mode");
 
-	*i2c_types = (enum pxa_i2c_types)(of_id->data);
+	*i2c_types = (enum pxa_i2c_types)device_get_match_data(&pdev->dev);
 
 	return 0;
 }
diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index 229353e96e09..6d829ed2f868 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -722,6 +722,7 @@ static const struct i2c_algorithm geni_i2c_algo = {
 #ifdef CONFIG_ACPI
 static const struct acpi_device_id geni_i2c_acpi_match[] = {
 	{ "QCOM0220"},
+	{ "QCOM0411" },
 	{ },
 };
 MODULE_DEVICE_TABLE(acpi, geni_i2c_acpi_match);
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index a32a93f9a60d..829ac053bbb7 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -41,6 +41,10 @@
 #define ICSAR	0x1C	/* slave address */
 #define ICMAR	0x20	/* master address */
 #define ICRXTX	0x24	/* data port */
+#define ICCCR2	0x28	/* Clock control 2 */
+#define ICMPR	0x2C	/* SCL mask control */
+#define ICHPR	0x30	/* SCL HIGH control */
+#define ICLPR	0x34	/* SCL LOW control */
 #define ICFBSCR	0x38	/* first bit setup cycle (Gen3) */
 #define ICDMAER	0x3c	/* DMA enable (Gen3) */
 
@@ -84,11 +88,25 @@
 #define RMDMAE	BIT(1)	/* DMA Master Received Enable */
 #define TMDMAE	BIT(0)	/* DMA Master Transmitted Enable */
 
+/* ICCCR2 */
+#define CDFD	BIT(2)	/* CDF Disable */
+#define HLSE	BIT(1)	/* HIGH/LOW Separate Control Enable */
+#define SME	BIT(0)	/* SCL Mask Enable */
+
 /* ICFBSCR */
 #define TCYC17	0x0f		/* 17*Tcyc delay 1st bit between SDA and SCL */
 
 #define RCAR_MIN_DMA_LEN	8
 
+/* SCL low/high ratio 5:4 to meet all I2C timing specs (incl safety margin) */
+#define RCAR_SCLD_RATIO		5
+#define RCAR_SCHD_RATIO		4
+/*
+ * SMD should be smaller than SCLD/SCHD and is always around 20 in the docs.
+ * Thus, we simply use 20 which works for low and high speeds.
+ */
+#define RCAR_DEFAULT_SMD	20
+
 #define RCAR_BUS_PHASE_START	(MDBS | MIE | ESG)
 #define RCAR_BUS_PHASE_DATA	(MDBS | MIE)
 #define RCAR_BUS_PHASE_STOP	(MDBS | MIE | FSB)
@@ -128,6 +146,8 @@ struct rcar_i2c_priv {
 
 	int pos;
 	u32 icccr;
+	u16 schd;
+	u16 scld;
 	u8 recovery_icmcr;	/* protected by adapter lock */
 	enum rcar_i2c_type devtype;
 	struct i2c_client *slave;
@@ -216,11 +236,16 @@ static void rcar_i2c_init(struct rcar_i2c_priv *priv)
 	rcar_i2c_write(priv, ICMCR, MDBS);
 	rcar_i2c_write(priv, ICMSR, 0);
 	/* start clock */
-	rcar_i2c_write(priv, ICCCR, priv->icccr);
-
-	if (priv->devtype == I2C_RCAR_GEN3)
+	if (priv->devtype < I2C_RCAR_GEN3) {
+		rcar_i2c_write(priv, ICCCR, priv->icccr);
+	} else {
+		rcar_i2c_write(priv, ICCCR2, CDFD | HLSE | SME);
+		rcar_i2c_write(priv, ICCCR, priv->icccr);
+		rcar_i2c_write(priv, ICMPR, RCAR_DEFAULT_SMD);
+		rcar_i2c_write(priv, ICHPR, priv->schd);
+		rcar_i2c_write(priv, ICLPR, priv->scld);
 		rcar_i2c_write(priv, ICFBSCR, TCYC17);
-
+	}
 }
 
 static int rcar_i2c_bus_barrier(struct rcar_i2c_priv *priv)
@@ -241,7 +266,7 @@ static int rcar_i2c_bus_barrier(struct rcar_i2c_priv *priv)
 
 static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv)
 {
-	u32 scgd, cdf, round, ick, sum, scl, cdf_width;
+	u32 cdf, round, ick, sum, scl, cdf_width;
 	unsigned long rate;
 	struct device *dev = rcar_i2c_priv_to_dev(priv);
 	struct i2c_timings t = {
@@ -254,27 +279,17 @@ static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv)
 	/* Fall back to previously used values if not supplied */
 	i2c_parse_fw_timings(dev, &t, false);
 
-	switch (priv->devtype) {
-	case I2C_RCAR_GEN1:
-		cdf_width = 2;
-		break;
-	case I2C_RCAR_GEN2:
-	case I2C_RCAR_GEN3:
-		cdf_width = 3;
-		break;
-	default:
-		dev_err(dev, "device type error\n");
-		return -EIO;
-	}
-
 	/*
 	 * calculate SCL clock
 	 * see
-	 *	ICCCR
+	 *	ICCCR (and ICCCR2 for Gen3+)
 	 *
 	 * ick	= clkp / (1 + CDF)
 	 * SCL	= ick / (20 + SCGD * 8 + F[(ticf + tr + intd) * ick])
 	 *
+	 * for Gen3+:
+	 * SCL	= clkp / (8 + SMD * 2 + SCLD + SCHD +F[(ticf + tr + intd) * clkp])
+	 *
 	 * ick  : I2C internal clock < 20 MHz
 	 * ticf : I2C SCL falling time
 	 * tr   : I2C SCL rising  time
@@ -284,52 +299,82 @@ static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv)
 	 */
 	rate = clk_get_rate(priv->clk);
 	cdf = rate / 20000000;
-	if (cdf >= 1U << cdf_width) {
-		dev_err(dev, "Input clock %lu too high\n", rate);
-		return -EIO;
-	}
-	ick = rate / (cdf + 1);
+	cdf_width = (priv->devtype == I2C_RCAR_GEN1) ? 2 : 3;
+	if (cdf >= 1U << cdf_width)
+		goto err_no_val;
+
+	/* On Gen3+, we use cdf only for the filters, not as a SCL divider */
+	ick = rate / (priv->devtype < I2C_RCAR_GEN3 ? (cdf + 1) : 1);
 
 	/*
-	 * it is impossible to calculate large scale
-	 * number on u32. separate it
+	 * It is impossible to calculate a large scale number on u32. Separate it.
 	 *
 	 * F[(ticf + tr + intd) * ick] with sum = (ticf + tr + intd)
 	 *  = F[sum * ick / 1000000000]
 	 *  = F[(ick / 1000000) * sum / 1000]
 	 */
 	sum = t.scl_fall_ns + t.scl_rise_ns + t.scl_int_delay_ns;
-	round = (ick + 500000) / 1000000 * sum;
-	round = (round + 500) / 1000;
+	round = DIV_ROUND_CLOSEST(ick, 1000000);
+	round = DIV_ROUND_CLOSEST(round * sum, 1000);
 
-	/*
-	 * SCL	= ick / (20 + SCGD * 8 + F[(ticf + tr + intd) * ick])
-	 *
-	 * Calculation result (= SCL) should be less than
-	 * bus_speed for hardware safety
-	 *
-	 * We could use something along the lines of
-	 *	div = ick / (bus_speed + 1) + 1;
-	 *	scgd = (div - 20 - round + 7) / 8;
-	 *	scl = ick / (20 + (scgd * 8) + round);
-	 * (not fully verified) but that would get pretty involved
-	 */
-	for (scgd = 0; scgd < 0x40; scgd++) {
-		scl = ick / (20 + (scgd * 8) + round);
-		if (scl <= t.bus_freq_hz)
-			goto scgd_find;
-	}
-	dev_err(dev, "it is impossible to calculate best SCL\n");
-	return -EIO;
+	if (priv->devtype < I2C_RCAR_GEN3) {
+		u32 scgd;
+		/*
+		 * SCL	= ick / (20 + 8 * SCGD + F[(ticf + tr + intd) * ick])
+		 * 20 + 8 * SCGD + F[...] = ick / SCL
+		 * SCGD = ((ick / SCL) - 20 - F[...]) / 8
+		 * Result (= SCL) should be less than bus_speed for hardware safety
+		 */
+		scgd = DIV_ROUND_UP(ick, t.bus_freq_hz ?: 1);
+		scgd = DIV_ROUND_UP(scgd - 20 - round, 8);
+		scl = ick / (20 + 8 * scgd + round);
+
+		if (scgd > 0x3f)
+			goto err_no_val;
 
-scgd_find:
-	dev_dbg(dev, "clk %d/%d(%lu), round %u, CDF:0x%x, SCGD: 0x%x\n",
-		scl, t.bus_freq_hz, rate, round, cdf, scgd);
+		dev_dbg(dev, "clk %u/%u(%lu), round %u, CDF: %u, SCGD: %u\n",
+			scl, t.bus_freq_hz, rate, round, cdf, scgd);
 
-	/* keep icccr value */
-	priv->icccr = scgd << cdf_width | cdf;
+		priv->icccr = scgd << cdf_width | cdf;
+	} else {
+		u32 x, sum_ratio = RCAR_SCHD_RATIO + RCAR_SCLD_RATIO;
+		/*
+		 * SCLD/SCHD ratio and SMD default value are explained above
+		 * where they are defined. With these definitions, we can compute
+		 * x as a base value for the SCLD/SCHD ratio:
+		 *
+		 * SCL = clkp / (8 + 2 * SMD + SCLD + SCHD + F[(ticf + tr + intd) * clkp])
+		 * SCL = clkp / (8 + 2 * RCAR_DEFAULT_SMD + RCAR_SCLD_RATIO * x
+		 *		 + RCAR_SCHD_RATIO * x + F[...])
+		 *
+		 * with: sum_ratio = RCAR_SCLD_RATIO + RCAR_SCHD_RATIO
+		 * and:  smd = RCAR_DEFAULT_SMD
+		 *
+		 * SCL = clkp / (8 + 2 * smd + sum_ratio * x + F[...])
+		 * 8 + 2 * smd + sum_ratio * x + F[...] = clkp / SCL
+		 * x = ((clkp / SCL) - 8 - 2 * smd - F[...]) / sum_ratio
+		 */
+		x = DIV_ROUND_UP(rate, t.bus_freq_hz ?: 1);
+		x = DIV_ROUND_UP(x - 8 - 2 * RCAR_DEFAULT_SMD - round, sum_ratio);
+		scl = rate / (8 + 2 * RCAR_DEFAULT_SMD + sum_ratio * x + round);
+
+		/* Bail out if values don't fit into 16 bit or SMD became too large */
+		if (x * RCAR_SCLD_RATIO > 0xffff || RCAR_DEFAULT_SMD > x * RCAR_SCHD_RATIO)
+			goto err_no_val;
+
+		priv->icccr = cdf;
+		priv->schd = RCAR_SCHD_RATIO * x;
+		priv->scld = RCAR_SCLD_RATIO * x;
+
+		dev_dbg(dev, "clk %u/%u(%lu), round %u, CDF: %u SCHD %u SCLD %u\n",
+			scl, t.bus_freq_hz, rate, round, cdf, priv->schd, priv->scld);
+	}
 
 	return 0;
+
+err_no_val:
+	dev_err(dev, "it is impossible to calculate best SCL\n");
+	return -EINVAL;
 }
 
 /*
@@ -843,12 +888,10 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap,
 
 	/* Gen3 needs a reset before allowing RXDMA once */
 	if (priv->devtype == I2C_RCAR_GEN3) {
-		priv->flags |= ID_P_NO_RXDMA;
-		if (!IS_ERR(priv->rstc)) {
-			ret = rcar_i2c_do_reset(priv);
-			if (ret == 0)
-				priv->flags &= ~ID_P_NO_RXDMA;
-		}
+		priv->flags &= ~ID_P_NO_RXDMA;
+		ret = rcar_i2c_do_reset(priv);
+		if (ret)
+			goto out;
 	}
 
 	rcar_i2c_init(priv);
@@ -1099,15 +1142,6 @@ static int rcar_i2c_probe(struct platform_device *pdev)
 		irqhandler = rcar_i2c_gen2_irq;
 	}
 
-	if (priv->devtype == I2C_RCAR_GEN3) {
-		priv->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
-		if (!IS_ERR(priv->rstc)) {
-			ret = reset_control_status(priv->rstc);
-			if (ret < 0)
-				priv->rstc = ERR_PTR(-ENOTSUPP);
-		}
-	}
-
 	/* Stay always active when multi-master to keep arbitration working */
 	if (of_property_read_bool(dev->of_node, "multi-master"))
 		priv->flags |= ID_P_PM_BLOCKED;
@@ -1117,6 +1151,18 @@ static int rcar_i2c_probe(struct platform_device *pdev)
 	if (of_property_read_bool(dev->of_node, "smbus"))
 		priv->flags |= ID_P_HOST_NOTIFY;
 
+	if (priv->devtype == I2C_RCAR_GEN3) {
+		priv->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+		if (IS_ERR(priv->rstc)) {
+			ret = PTR_ERR(priv->rstc);
+			goto out_pm_put;
+		}
+
+		ret = reset_control_status(priv->rstc);
+		if (ret < 0)
+			goto out_pm_put;
+	}
+
 	ret = platform_get_irq(pdev, 0);
 	if (ret < 0)
 		goto out_pm_put;
diff --git a/drivers/i2c/busses/i2c-riic.c b/drivers/i2c/busses/i2c-riic.c
index f0ee8871d5ae..e43ff483c56e 100644
--- a/drivers/i2c/busses/i2c-riic.c
+++ b/drivers/i2c/busses/i2c-riic.c
@@ -313,7 +313,7 @@ static int riic_init_hw(struct riic_dev *riic, struct i2c_timings *t)
 	 * frequency with only 62 clock ticks max (31 high, 31 low).
 	 * Aim for a duty of 60% LOW, 40% HIGH.
 	 */
-	total_ticks = DIV_ROUND_UP(rate, t->bus_freq_hz);
+	total_ticks = DIV_ROUND_UP(rate, t->bus_freq_hz ?: 1);
 
 	for (cks = 0; cks < 7; cks++) {
 		/*
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 127eb3805fac..c56886af724e 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -133,7 +133,7 @@ static const struct platform_device_id s3c24xx_driver_ids[] = {
 };
 MODULE_DEVICE_TABLE(platform, s3c24xx_driver_ids);
 
-static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat);
+static void i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat);
 
 #ifdef CONFIG_OF
 static const struct of_device_id s3c24xx_i2c_match[] = {
@@ -377,11 +377,10 @@ static inline int is_msgend(struct s3c24xx_i2c *i2c)
 /*
  * process an interrupt and work out what to do
  */
-static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
+static void i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
 {
 	unsigned long tmp;
 	unsigned char byte;
-	int ret = 0;
 
 	switch (i2c->state) {
 
@@ -544,7 +543,7 @@ static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
 	tmp &= ~S3C2410_IICCON_IRQPEND;
 	writel(tmp, i2c->regs + S3C2410_IICCON);
  out:
-	return ret;
+	return;
 }
 
 /*
diff --git a/drivers/i2c/busses/i2c-stm32f4.c b/drivers/i2c/busses/i2c-stm32f4.c
index ecc54792a66f..859ac0cf7f6c 100644
--- a/drivers/i2c/busses/i2c-stm32f4.c
+++ b/drivers/i2c/busses/i2c-stm32f4.c
@@ -783,23 +783,17 @@ static int stm32f4_i2c_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	i2c_dev->clk = devm_clk_get(&pdev->dev, NULL);
+	i2c_dev->clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(i2c_dev->clk)) {
-		dev_err(&pdev->dev, "Error: Missing controller clock\n");
+		dev_err(&pdev->dev, "Failed to enable clock\n");
 		return PTR_ERR(i2c_dev->clk);
 	}
-	ret = clk_prepare_enable(i2c_dev->clk);
-	if (ret) {
-		dev_err(i2c_dev->dev, "Failed to prepare_enable clock\n");
-		return ret;
-	}
 
 	rst = devm_reset_control_get_exclusive(&pdev->dev, NULL);
-	if (IS_ERR(rst)) {
-		ret = dev_err_probe(&pdev->dev, PTR_ERR(rst),
-				    "Error: Missing reset ctrl\n");
-		goto clk_free;
-	}
+	if (IS_ERR(rst))
+		return dev_err_probe(&pdev->dev, PTR_ERR(rst),
+				     "Error: Missing reset ctrl\n");
+
 	reset_control_assert(rst);
 	udelay(2);
 	reset_control_deassert(rst);
@@ -816,7 +810,7 @@ static int stm32f4_i2c_probe(struct platform_device *pdev)
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to request irq event %i\n",
 			irq_event);
-		goto clk_free;
+		return ret;
 	}
 
 	ret = devm_request_irq(&pdev->dev, irq_error, stm32f4_i2c_isr_error, 0,
@@ -824,12 +818,12 @@ static int stm32f4_i2c_probe(struct platform_device *pdev)
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to request irq error %i\n",
 			irq_error);
-		goto clk_free;
+		return ret;
 	}
 
 	ret = stm32f4_i2c_hw_config(i2c_dev);
 	if (ret)
-		goto clk_free;
+		return ret;
 
 	adap = &i2c_dev->adap;
 	i2c_set_adapdata(adap, i2c_dev);
@@ -845,7 +839,7 @@ static int stm32f4_i2c_probe(struct platform_device *pdev)
 
 	ret = i2c_add_adapter(adap);
 	if (ret)
-		goto clk_free;
+		return ret;
 
 	platform_set_drvdata(pdev, i2c_dev);
 
@@ -854,10 +848,6 @@ static int stm32f4_i2c_probe(struct platform_device *pdev)
 	dev_info(i2c_dev->dev, "STM32F4 I2C driver registered\n");
 
 	return 0;
-
-clk_free:
-	clk_disable_unprepare(i2c_dev->clk);
-	return ret;
 }
 
 static void stm32f4_i2c_remove(struct platform_device *pdev)
@@ -865,8 +855,6 @@ static void stm32f4_i2c_remove(struct platform_device *pdev)
 	struct stm32f4_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
 
 	i2c_del_adapter(&i2c_dev->adap);
-
-	clk_unprepare(i2c_dev->clk);
 }
 
 static const struct of_device_id stm32f4_i2c_match[] = {
diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index 0d3c9a041b56..983509936727 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -325,6 +325,7 @@ struct stm32f7_i2c_alert {
  * @dnf_dt: value of digital filter requested via dt
  * @dnf: value of digital filter to apply
  * @alert: SMBus alert specific data
+ * @atomic: boolean indicating that current transfer is atomic
  */
 struct stm32f7_i2c_dev {
 	struct i2c_adapter adap;
@@ -357,6 +358,7 @@ struct stm32f7_i2c_dev {
 	u32 dnf_dt;
 	u32 dnf;
 	struct stm32f7_i2c_alert *alert;
+	bool atomic;
 };
 
 /*
@@ -915,7 +917,8 @@ static void stm32f7_i2c_xfer_msg(struct stm32f7_i2c_dev *i2c_dev,
 
 	/* Configure DMA or enable RX/TX interrupt */
 	i2c_dev->use_dma = false;
-	if (i2c_dev->dma && f7_msg->count >= STM32F7_I2C_DMA_LEN_MIN) {
+	if (i2c_dev->dma && f7_msg->count >= STM32F7_I2C_DMA_LEN_MIN
+	    && !i2c_dev->atomic) {
 		ret = stm32_i2c_prep_dma_xfer(i2c_dev->dev, i2c_dev->dma,
 					      msg->flags & I2C_M_RD,
 					      f7_msg->count, f7_msg->buf,
@@ -939,6 +942,9 @@ static void stm32f7_i2c_xfer_msg(struct stm32f7_i2c_dev *i2c_dev,
 			cr1 |= STM32F7_I2C_CR1_TXDMAEN;
 	}
 
+	if (i2c_dev->atomic)
+		cr1 &= ~STM32F7_I2C_ALL_IRQ_MASK; /* Disable all interrupts */
+
 	/* Configure Start/Repeated Start */
 	cr2 |= STM32F7_I2C_CR2_START;
 
@@ -1673,7 +1679,22 @@ static irqreturn_t stm32f7_i2c_isr_error(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static int stm32f7_i2c_xfer(struct i2c_adapter *i2c_adap,
+static int stm32f7_i2c_wait_polling(struct stm32f7_i2c_dev *i2c_dev)
+{
+	ktime_t timeout = ktime_add_ms(ktime_get(), i2c_dev->adap.timeout);
+
+	while (ktime_compare(ktime_get(), timeout) < 0) {
+		udelay(5);
+		stm32f7_i2c_isr_event(0, i2c_dev);
+
+		if (completion_done(&i2c_dev->complete))
+			return 1;
+	}
+
+	return 0;
+}
+
+static int stm32f7_i2c_xfer_core(struct i2c_adapter *i2c_adap,
 			    struct i2c_msg msgs[], int num)
 {
 	struct stm32f7_i2c_dev *i2c_dev = i2c_get_adapdata(i2c_adap);
@@ -1697,8 +1718,12 @@ static int stm32f7_i2c_xfer(struct i2c_adapter *i2c_adap,
 
 	stm32f7_i2c_xfer_msg(i2c_dev, msgs);
 
-	time_left = wait_for_completion_timeout(&i2c_dev->complete,
-						i2c_dev->adap.timeout);
+	if (!i2c_dev->atomic)
+		time_left = wait_for_completion_timeout(&i2c_dev->complete,
+							i2c_dev->adap.timeout);
+	else
+		time_left = stm32f7_i2c_wait_polling(i2c_dev);
+
 	ret = f7_msg->result;
 	if (ret) {
 		if (i2c_dev->use_dma)
@@ -1730,6 +1755,24 @@ pm_free:
 	return (ret < 0) ? ret : num;
 }
 
+static int stm32f7_i2c_xfer(struct i2c_adapter *i2c_adap,
+			    struct i2c_msg msgs[], int num)
+{
+	struct stm32f7_i2c_dev *i2c_dev = i2c_get_adapdata(i2c_adap);
+
+	i2c_dev->atomic = false;
+	return stm32f7_i2c_xfer_core(i2c_adap, msgs, num);
+}
+
+static int stm32f7_i2c_xfer_atomic(struct i2c_adapter *i2c_adap,
+			    struct i2c_msg msgs[], int num)
+{
+	struct stm32f7_i2c_dev *i2c_dev = i2c_get_adapdata(i2c_adap);
+
+	i2c_dev->atomic = true;
+	return stm32f7_i2c_xfer_core(i2c_adap, msgs, num);
+}
+
 static int stm32f7_i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
 				  unsigned short flags, char read_write,
 				  u8 command, int size,
@@ -2098,6 +2141,7 @@ static u32 stm32f7_i2c_func(struct i2c_adapter *adap)
 
 static const struct i2c_algorithm stm32f7_i2c_algo = {
 	.master_xfer = stm32f7_i2c_xfer,
+	.master_xfer_atomic = stm32f7_i2c_xfer_atomic,
 	.smbus_xfer = stm32f7_i2c_smbus_xfer,
 	.functionality = stm32f7_i2c_func,
 	.reg_slave = stm32f7_i2c_reg_slave,
@@ -2134,23 +2178,16 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
 	i2c_dev->wakeup_src = of_property_read_bool(pdev->dev.of_node,
 						    "wakeup-source");
 
-	i2c_dev->clk = devm_clk_get(&pdev->dev, NULL);
+	i2c_dev->clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(i2c_dev->clk))
 		return dev_err_probe(&pdev->dev, PTR_ERR(i2c_dev->clk),
-				     "Failed to get controller clock\n");
-
-	ret = clk_prepare_enable(i2c_dev->clk);
-	if (ret) {
-		dev_err(&pdev->dev, "Failed to prepare_enable clock\n");
-		return ret;
-	}
+				     "Failed to enable controller clock\n");
 
 	rst = devm_reset_control_get(&pdev->dev, NULL);
-	if (IS_ERR(rst)) {
-		ret = dev_err_probe(&pdev->dev, PTR_ERR(rst),
-				    "Error: Missing reset ctrl\n");
-		goto clk_free;
-	}
+	if (IS_ERR(rst))
+		return dev_err_probe(&pdev->dev, PTR_ERR(rst),
+				     "Error: Missing reset ctrl\n");
+
 	reset_control_assert(rst);
 	udelay(2);
 	reset_control_deassert(rst);
@@ -2165,7 +2202,7 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to request irq event %i\n",
 			irq_event);
-		goto clk_free;
+		return ret;
 	}
 
 	ret = devm_request_irq(&pdev->dev, irq_error, stm32f7_i2c_isr_error, 0,
@@ -2173,29 +2210,28 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to request irq error %i\n",
 			irq_error);
-		goto clk_free;
+		return ret;
 	}
 
 	setup = of_device_get_match_data(&pdev->dev);
 	if (!setup) {
 		dev_err(&pdev->dev, "Can't get device data\n");
-		ret = -ENODEV;
-		goto clk_free;
+		return -ENODEV;
 	}
 	i2c_dev->setup = *setup;
 
 	ret = stm32f7_i2c_setup_timing(i2c_dev, &i2c_dev->setup);
 	if (ret)
-		goto clk_free;
+		return ret;
 
 	/* Setup Fast mode plus if necessary */
 	if (i2c_dev->bus_rate > I2C_MAX_FAST_MODE_FREQ) {
 		ret = stm32f7_i2c_setup_fm_plus_bits(pdev, i2c_dev);
 		if (ret)
-			goto clk_free;
+			return ret;
 		ret = stm32f7_i2c_write_fm_plus_bits(i2c_dev, true);
 		if (ret)
-			goto clk_free;
+			return ret;
 	}
 
 	adap = &i2c_dev->adap;
@@ -2306,9 +2342,6 @@ clr_wakeup_capable:
 fmp_clear:
 	stm32f7_i2c_write_fm_plus_bits(i2c_dev, false);
 
-clk_free:
-	clk_disable_unprepare(i2c_dev->clk);
-
 	return ret;
 }
 
@@ -2342,8 +2375,6 @@ static void stm32f7_i2c_remove(struct platform_device *pdev)
 	}
 
 	stm32f7_i2c_write_fm_plus_bits(i2c_dev, false);
-
-	clk_disable_unprepare(i2c_dev->clk);
 }
 
 static int __maybe_unused stm32f7_i2c_runtime_suspend(struct device *dev)
diff --git a/drivers/i2c/busses/i2c-sun6i-p2wi.c b/drivers/i2c/busses/i2c-sun6i-p2wi.c
index fa6020dced59..85e035e7a1d7 100644
--- a/drivers/i2c/busses/i2c-sun6i-p2wi.c
+++ b/drivers/i2c/busses/i2c-sun6i-p2wi.c
@@ -201,6 +201,11 @@ static int p2wi_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	if (clk_freq == 0) {
+		dev_err(dev, "clock-frequency is set to 0 in DT\n");
+		return -EINVAL;
+	}
+
 	if (of_get_child_count(np) > 1) {
 		dev_err(dev, "P2WI only supports one slave device\n");
 		return -EINVAL;
diff --git a/drivers/i2c/i2c-atr.c b/drivers/i2c/i2c-atr.c
index 8ca1daadec93..f21475ae5921 100644
--- a/drivers/i2c/i2c-atr.c
+++ b/drivers/i2c/i2c-atr.c
@@ -94,7 +94,7 @@ struct i2c_atr {
 
 	struct notifier_block i2c_nb;
 
-	struct i2c_adapter *adapter[];
+	struct i2c_adapter *adapter[] __counted_by(max_adapters);
 };
 
 static struct i2c_atr_alias_pair *
diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index 60746652fd52..eac90a3cf61a 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -931,8 +931,9 @@ int i2c_dev_irq_from_resources(const struct resource *resources,
 struct i2c_client *
 i2c_new_client_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
 {
-	struct i2c_client	*client;
-	int			status;
+	struct i2c_client *client;
+	bool need_put = false;
+	int status;
 
 	client = kzalloc(sizeof *client, GFP_KERNEL);
 	if (!client)
@@ -970,7 +971,6 @@ i2c_new_client_device(struct i2c_adapter *adap, struct i2c_board_info const *inf
 	client->dev.fwnode = info->fwnode;
 
 	device_enable_async_suspend(&client->dev);
-	i2c_dev_set_name(adap, client, info);
 
 	if (info->swnode) {
 		status = device_add_software_node(&client->dev, info->swnode);
@@ -982,6 +982,7 @@ i2c_new_client_device(struct i2c_adapter *adap, struct i2c_board_info const *inf
 		}
 	}
 
+	i2c_dev_set_name(adap, client, info);
 	status = device_register(&client->dev);
 	if (status)
 		goto out_remove_swnode;
@@ -993,6 +994,7 @@ i2c_new_client_device(struct i2c_adapter *adap, struct i2c_board_info const *inf
 
 out_remove_swnode:
 	device_remove_software_node(&client->dev);
+	need_put = true;
 out_err_put_of_node:
 	of_node_put(info->of_node);
 out_err:
@@ -1000,7 +1002,10 @@ out_err:
 		"Failed to register i2c client %s at 0x%02x (%d)\n",
 		client->name, client->addr, status);
 out_err_silent:
-	kfree(client);
+	if (need_put)
+		put_device(&client->dev);
+	else
+		kfree(client);
 	return ERR_PTR(status);
 }
 EXPORT_SYMBOL_GPL(i2c_new_client_device);
@@ -1189,9 +1194,11 @@ static void i2c_adapter_dev_release(struct device *dev)
 unsigned int i2c_adapter_depth(struct i2c_adapter *adapter)
 {
 	unsigned int depth = 0;
+	struct device *parent;
 
-	while ((adapter = i2c_parent_is_i2c_adapter(adapter)))
-		depth++;
+	for (parent = adapter->dev.parent; parent; parent = parent->parent)
+		if (parent->type == &i2c_adapter_type)
+			depth++;
 
 	WARN_ONCE(depth >= MAX_LOCKDEP_SUBCLASSES,
 		  "adapter depth exceeds lockdep subclass limit\n");
diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index a01b59e3599b..a91201509bc1 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -636,7 +636,10 @@ static const struct file_operations i2cdev_fops = {
 
 /* ------------------------------------------------------------------------- */
 
-static struct class *i2c_dev_class;
+static const struct class i2c_dev_class = {
+	.name = "i2c-dev",
+	.dev_groups = i2c_groups,
+};
 
 static void i2cdev_dev_release(struct device *dev)
 {
@@ -665,7 +668,7 @@ static int i2cdev_attach_adapter(struct device *dev)
 
 	device_initialize(&i2c_dev->dev);
 	i2c_dev->dev.devt = MKDEV(I2C_MAJOR, adap->nr);
-	i2c_dev->dev.class = i2c_dev_class;
+	i2c_dev->dev.class = &i2c_dev_class;
 	i2c_dev->dev.parent = &adap->dev;
 	i2c_dev->dev.release = i2cdev_dev_release;
 
@@ -751,12 +754,9 @@ static int __init i2c_dev_init(void)
 	if (res)
 		goto out;
 
-	i2c_dev_class = class_create("i2c-dev");
-	if (IS_ERR(i2c_dev_class)) {
-		res = PTR_ERR(i2c_dev_class);
+	res = class_register(&i2c_dev_class);
+	if (res)
 		goto out_unreg_chrdev;
-	}
-	i2c_dev_class->dev_groups = i2c_groups;
 
 	/* Keep track of adapters which will be added or removed later */
 	res = bus_register_notifier(&i2c_bus_type, &i2cdev_notifier);
@@ -769,7 +769,7 @@ static int __init i2c_dev_init(void)
 	return 0;
 
 out_unreg_class:
-	class_destroy(i2c_dev_class);
+	class_unregister(&i2c_dev_class);
 out_unreg_chrdev:
 	unregister_chrdev_region(MKDEV(I2C_MAJOR, 0), I2C_MINORS);
 out:
@@ -781,7 +781,7 @@ static void __exit i2c_dev_exit(void)
 {
 	bus_unregister_notifier(&i2c_bus_type, &i2cdev_notifier);
 	i2c_for_each_dev(NULL, i2c_dev_detach_adapter);
-	class_destroy(i2c_dev_class);
+	class_unregister(&i2c_dev_class);
 	unregister_chrdev_region(MKDEV(I2C_MAJOR, 0), I2C_MINORS);
 }
 
diff --git a/drivers/i2c/muxes/i2c-demux-pinctrl.c b/drivers/i2c/muxes/i2c-demux-pinctrl.c
index 9f2e4aa28159..7e2686b606c0 100644
--- a/drivers/i2c/muxes/i2c-demux-pinctrl.c
+++ b/drivers/i2c/muxes/i2c-demux-pinctrl.c
@@ -32,7 +32,7 @@ struct i2c_demux_pinctrl_priv {
 	const char *bus_name;
 	struct i2c_adapter cur_adap;
 	struct i2c_algorithm algo;
-	struct i2c_demux_pinctrl_chan chan[];
+	struct i2c_demux_pinctrl_chan chan[] __counted_by(num_chan);
 };
 
 static int i2c_demux_master_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
@@ -167,9 +167,9 @@ static ssize_t available_masters_show(struct device *dev,
 	int count = 0, i;
 
 	for (i = 0; i < priv->num_chan && count < PAGE_SIZE; i++)
-		count += scnprintf(buf + count, PAGE_SIZE - count, "%d:%pOF%c",
-				   i, priv->chan[i].parent_np,
-				   i == priv->num_chan - 1 ? '\n' : ' ');
+		count += sysfs_emit_at(buf, count, "%d:%pOF%c",
+				       i, priv->chan[i].parent_np,
+				       i == priv->num_chan - 1 ? '\n' : ' ');
 
 	return count;
 }
@@ -226,6 +226,8 @@ static int i2c_demux_pinctrl_probe(struct platform_device *pdev)
 	if (!priv || !props)
 		return -ENOMEM;
 
+	priv->num_chan = num_chan;
+
 	err = of_property_read_string(np, "i2c-bus-name", &priv->bus_name);
 	if (err)
 		return err;
@@ -253,9 +255,7 @@ static int i2c_demux_pinctrl_probe(struct platform_device *pdev)
 		of_changeset_update_property(&priv->chan[i].chgset, adap_np, &props[i]);
 	}
 
-	priv->num_chan = num_chan;
 	priv->dev = &pdev->dev;
-
 	platform_set_drvdata(pdev, priv);
 
 	pm_runtime_no_callbacks(&pdev->dev);
diff --git a/drivers/i2c/muxes/i2c-mux-gpio.c b/drivers/i2c/muxes/i2c-mux-gpio.c
index 78987ead6be0..6b979a0a6ab8 100644
--- a/drivers/i2c/muxes/i2c-mux-gpio.c
+++ b/drivers/i2c/muxes/i2c-mux-gpio.c
@@ -22,7 +22,7 @@ struct gpiomux {
 	struct gpio_desc **gpios;
 };
 
-static void i2c_mux_gpio_set(const struct gpiomux *mux, unsigned val)
+static void i2c_mux_gpio_set(const struct gpiomux *mux, unsigned int val)
 {
 	DECLARE_BITMAP(values, BITS_PER_TYPE(val));
 
@@ -58,7 +58,7 @@ static int i2c_mux_gpio_probe_fw(struct gpiomux *mux,
 	struct device_node *adapter_np;
 	struct i2c_adapter *adapter = NULL;
 	struct fwnode_handle *child;
-	unsigned *values;
+	unsigned int *values;
 	int rc, i = 0;
 
 	if (is_of_node(fwnode)) {
@@ -101,7 +101,6 @@ static int i2c_mux_gpio_probe_fw(struct gpiomux *mux,
 	device_for_each_child_node(dev, child) {
 		if (is_of_node(child)) {
 			fwnode_property_read_u32(child, "reg", values + i);
-
 		} else if (is_acpi_node(child)) {
 			rc = acpi_get_local_address(ACPI_HANDLE_FWNODE(child), values + i);
 			if (rc) {
@@ -126,7 +125,7 @@ static int i2c_mux_gpio_probe(struct platform_device *pdev)
 	struct gpiomux *mux;
 	struct i2c_adapter *parent;
 	struct i2c_adapter *root;
-	unsigned initial_state;
+	unsigned int initial_state;
 	int i, ngpios, ret;
 
 	mux = devm_kzalloc(&pdev->dev, sizeof(*mux), GFP_KERNEL);