ide: remove useless subdirs from drivers/ide/

Suggested-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 0 insertions, 532 deletions

diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c
deleted file mode 100644
index 935385c77e06..000000000000
--- a/drivers/ide/pci/cmd64x.c
+++ /dev/null
@@ -1,532 +0,0 @@
-/*
- * cmd64x.c: Enable interrupts at initialization time on Ultra/PCI machines.
- *           Due to massive hardware bugs, UltraDMA is only supported
- *           on the 646U2 and not on the 646U.
- *
- * Copyright (C) 1998		Eddie C. Dost  (ecd@skynet.be)
- * Copyright (C) 1998		David S. Miller (davem@redhat.com)
- *
- * Copyright (C) 1999-2002	Andre Hedrick <andre@linux-ide.org>
- * Copyright (C) 2007		MontaVista Software, Inc. <source@mvista.com>
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "cmd64x"
-
-#define CMD_DEBUG 0
-
-#if CMD_DEBUG
-#define cmdprintk(x...)	printk(x)
-#else
-#define cmdprintk(x...)
-#endif
-
-/*
- * CMD64x specific registers definition.
- */
-#define CFR		0x50
-#define   CFR_INTR_CH0		0x04
-
-#define	CMDTIM		0x52
-#define	ARTTIM0		0x53
-#define	DRWTIM0		0x54
-#define ARTTIM1 	0x55
-#define DRWTIM1		0x56
-#define ARTTIM23	0x57
-#define   ARTTIM23_DIS_RA2	0x04
-#define   ARTTIM23_DIS_RA3	0x08
-#define   ARTTIM23_INTR_CH1	0x10
-#define DRWTIM2		0x58
-#define BRST		0x59
-#define DRWTIM3		0x5b
-
-#define BMIDECR0	0x70
-#define MRDMODE		0x71
-#define   MRDMODE_INTR_CH0	0x04
-#define   MRDMODE_INTR_CH1	0x08
-#define UDIDETCR0	0x73
-#define DTPR0		0x74
-#define BMIDECR1	0x78
-#define BMIDECSR	0x79
-#define UDIDETCR1	0x7B
-#define DTPR1		0x7C
-
-static u8 quantize_timing(int timing, int quant)
-{
-	return (timing + quant - 1) / quant;
-}
-
-/*
- * This routine calculates active/recovery counts and then writes them into
- * the chipset registers.
- */
-static void program_cycle_times (ide_drive_t *drive, int cycle_time, int active_time)
-{
-	struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
-	int clock_time = 1000 / (ide_pci_clk ? ide_pci_clk : 33);
-	u8  cycle_count, active_count, recovery_count, drwtim;
-	static const u8 recovery_values[] =
-		{15, 15, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 0};
-	static const u8 drwtim_regs[4] = {DRWTIM0, DRWTIM1, DRWTIM2, DRWTIM3};
-
-	cmdprintk("program_cycle_times parameters: total=%d, active=%d\n",
-		  cycle_time, active_time);
-
-	cycle_count	= quantize_timing( cycle_time, clock_time);
-	active_count	= quantize_timing(active_time, clock_time);
-	recovery_count	= cycle_count - active_count;
-
-	/*
-	 * In case we've got too long recovery phase, try to lengthen
-	 * the active phase
-	 */
-	if (recovery_count > 16) {
-		active_count += recovery_count - 16;
-		recovery_count = 16;
-	}
-	if (active_count > 16)		/* shouldn't actually happen... */
-	 	active_count = 16;
-
-	cmdprintk("Final counts: total=%d, active=%d, recovery=%d\n",
-		  cycle_count, active_count, recovery_count);
-
-	/*
-	 * Convert values to internal chipset representation
-	 */
-	recovery_count = recovery_values[recovery_count];
- 	active_count  &= 0x0f;
-
-	/* Program the active/recovery counts into the DRWTIM register */
-	drwtim = (active_count << 4) | recovery_count;
-	(void) pci_write_config_byte(dev, drwtim_regs[drive->dn], drwtim);
-	cmdprintk("Write 0x%02x to reg 0x%x\n", drwtim, drwtim_regs[drive->dn]);
-}
-
-/*
- * This routine writes into the chipset registers
- * PIO setup/active/recovery timings.
- */
-static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio)
-{
-	ide_hwif_t *hwif	= HWIF(drive);
-	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	struct ide_timing *t	= ide_timing_find_mode(XFER_PIO_0 + pio);
-	unsigned int cycle_time;
-	u8 setup_count, arttim = 0;
-
-	static const u8 setup_values[] = {0x40, 0x40, 0x40, 0x80, 0, 0xc0};
-	static const u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23};
-
-	cycle_time = ide_pio_cycle_time(drive, pio);
-
-	program_cycle_times(drive, cycle_time, t->active);
-
-	setup_count = quantize_timing(t->setup,
-			1000 / (ide_pci_clk ? ide_pci_clk : 33));
-
-	/*
-	 * The primary channel has individual address setup timing registers
-	 * for each drive and the hardware selects the slowest timing itself.
-	 * The secondary channel has one common register and we have to select
-	 * the slowest address setup timing ourselves.
-	 */
-	if (hwif->channel) {
-		ide_drive_t *drives = hwif->drives;
-
-		drive->drive_data = setup_count;
-		setup_count = max(drives[0].drive_data, drives[1].drive_data);
-	}
-
-	if (setup_count > 5)		/* shouldn't actually happen... */
-		setup_count = 5;
-	cmdprintk("Final address setup count: %d\n", setup_count);
-
-	/*
-	 * Program the address setup clocks into the ARTTIM registers.
-	 * Avoid clearing the secondary channel's interrupt bit.
-	 */
-	(void) pci_read_config_byte (dev, arttim_regs[drive->dn], &arttim);
-	if (hwif->channel)
-		arttim &= ~ARTTIM23_INTR_CH1;
-	arttim &= ~0xc0;
-	arttim |= setup_values[setup_count];
-	(void) pci_write_config_byte(dev, arttim_regs[drive->dn], arttim);
-	cmdprintk("Write 0x%02x to reg 0x%x\n", arttim, arttim_regs[drive->dn]);
-}
-
-/*
- * Attempts to set drive's PIO mode.
- * Special cases are 8: prefetch off, 9: prefetch on (both never worked)
- */
-
-static void cmd64x_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
-	/*
-	 * Filter out the prefetch control values
-	 * to prevent PIO5 from being programmed
-	 */
-	if (pio == 8 || pio == 9)
-		return;
-
-	cmd64x_tune_pio(drive, pio);
-}
-
-static void cmd64x_set_dma_mode(ide_drive_t *drive, const u8 speed)
-{
-	ide_hwif_t *hwif	= HWIF(drive);
-	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	u8 unit			= drive->dn & 0x01;
-	u8 regU = 0, pciU	= hwif->channel ? UDIDETCR1 : UDIDETCR0;
-
-	if (speed >= XFER_SW_DMA_0) {
-		(void) pci_read_config_byte(dev, pciU, &regU);
-		regU &= ~(unit ? 0xCA : 0x35);
-	}
-
-	switch(speed) {
-	case XFER_UDMA_5:
-		regU |= unit ? 0x0A : 0x05;
-		break;
-	case XFER_UDMA_4:
-		regU |= unit ? 0x4A : 0x15;
-		break;
-	case XFER_UDMA_3:
-		regU |= unit ? 0x8A : 0x25;
-		break;
-	case XFER_UDMA_2:
-		regU |= unit ? 0x42 : 0x11;
-		break;
-	case XFER_UDMA_1:
-		regU |= unit ? 0x82 : 0x21;
-		break;
-	case XFER_UDMA_0:
-		regU |= unit ? 0xC2 : 0x31;
-		break;
-	case XFER_MW_DMA_2:
-		program_cycle_times(drive, 120, 70);
-		break;
-	case XFER_MW_DMA_1:
-		program_cycle_times(drive, 150, 80);
-		break;
-	case XFER_MW_DMA_0:
-		program_cycle_times(drive, 480, 215);
-		break;
-	}
-
-	if (speed >= XFER_SW_DMA_0)
-		(void) pci_write_config_byte(dev, pciU, regU);
-}
-
-static int cmd648_dma_end(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif	= HWIF(drive);
-	unsigned long base	= hwif->dma_base - (hwif->channel * 8);
-	int err			= ide_dma_end(drive);
-	u8  irq_mask		= hwif->channel ? MRDMODE_INTR_CH1 :
-						  MRDMODE_INTR_CH0;
-	u8  mrdmode		= inb(base + 1);
-
-	/* clear the interrupt bit */
-	outb((mrdmode & ~(MRDMODE_INTR_CH0 | MRDMODE_INTR_CH1)) | irq_mask,
-	     base + 1);
-
-	return err;
-}
-
-static int cmd64x_dma_end(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif	= HWIF(drive);
-	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	int irq_reg		= hwif->channel ? ARTTIM23 : CFR;
-	u8  irq_mask		= hwif->channel ? ARTTIM23_INTR_CH1 :
-						  CFR_INTR_CH0;
-	u8  irq_stat		= 0;
-	int err			= ide_dma_end(drive);
-
-	(void) pci_read_config_byte(dev, irq_reg, &irq_stat);
-	/* clear the interrupt bit */
-	(void) pci_write_config_byte(dev, irq_reg, irq_stat | irq_mask);
-
-	return err;
-}
-
-static int cmd648_dma_test_irq(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif	= HWIF(drive);
-	unsigned long base	= hwif->dma_base - (hwif->channel * 8);
-	u8 irq_mask		= hwif->channel ? MRDMODE_INTR_CH1 :
-						  MRDMODE_INTR_CH0;
-	u8 dma_stat		= inb(hwif->dma_base + ATA_DMA_STATUS);
-	u8 mrdmode		= inb(base + 1);
-
-#ifdef DEBUG
-	printk("%s: dma_stat: 0x%02x mrdmode: 0x%02x irq_mask: 0x%02x\n",
-	       drive->name, dma_stat, mrdmode, irq_mask);
-#endif
-	if (!(mrdmode & irq_mask))
-		return 0;
-
-	/* return 1 if INTR asserted */
-	if (dma_stat & 4)
-		return 1;
-
-	return 0;
-}
-
-static int cmd64x_dma_test_irq(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif	= HWIF(drive);
-	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	int irq_reg		= hwif->channel ? ARTTIM23 : CFR;
-	u8  irq_mask		= hwif->channel ? ARTTIM23_INTR_CH1 :
-						  CFR_INTR_CH0;
-	u8  dma_stat		= inb(hwif->dma_base + ATA_DMA_STATUS);
-	u8  irq_stat		= 0;
-
-	(void) pci_read_config_byte(dev, irq_reg, &irq_stat);
-
-#ifdef DEBUG
-	printk("%s: dma_stat: 0x%02x irq_stat: 0x%02x irq_mask: 0x%02x\n",
-	       drive->name, dma_stat, irq_stat, irq_mask);
-#endif
-	if (!(irq_stat & irq_mask))
-		return 0;
-
-	/* return 1 if INTR asserted */
-	if (dma_stat & 4)
-		return 1;
-
-	return 0;
-}
-
-/*
- * ASUS P55T2P4D with CMD646 chipset revision 0x01 requires the old
- * event order for DMA transfers.
- */
-
-static int cmd646_1_dma_end(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = HWIF(drive);
-	u8 dma_stat = 0, dma_cmd = 0;
-
-	drive->waiting_for_dma = 0;
-	/* get DMA status */
-	dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
-	/* read DMA command state */
-	dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
-	/* stop DMA */
-	outb(dma_cmd & ~1, hwif->dma_base + ATA_DMA_CMD);
-	/* clear the INTR & ERROR bits */
-	outb(dma_stat | 6, hwif->dma_base + ATA_DMA_STATUS);
-	/* and free any DMA resources */
-	ide_destroy_dmatable(drive);
-	/* verify good DMA status */
-	return (dma_stat & 7) != 4;
-}
-
-static unsigned int init_chipset_cmd64x(struct pci_dev *dev)
-{
-	u8 mrdmode = 0;
-
-	/* Set a good latency timer and cache line size value. */
-	(void) pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64);
-	/* FIXME: pci_set_master() to ensure a good latency timer value */
-
-	/*
-	 * Enable interrupts, select MEMORY READ LINE for reads.
-	 *
-	 * NOTE: although not mentioned in the PCI0646U specs,
-	 * bits 0-1 are write only and won't be read back as
-	 * set or not -- PCI0646U2 specs clarify this point.
-	 */
-	(void) pci_read_config_byte (dev, MRDMODE, &mrdmode);
-	mrdmode &= ~0x30;
-	(void) pci_write_config_byte(dev, MRDMODE, (mrdmode | 0x02));
-
-	return 0;
-}
-
-static u8 cmd64x_cable_detect(ide_hwif_t *hwif)
-{
-	struct pci_dev  *dev	= to_pci_dev(hwif->dev);
-	u8 bmidecsr = 0, mask	= hwif->channel ? 0x02 : 0x01;
-
-	switch (dev->device) {
-	case PCI_DEVICE_ID_CMD_648:
-	case PCI_DEVICE_ID_CMD_649:
- 		pci_read_config_byte(dev, BMIDECSR, &bmidecsr);
-		return (bmidecsr & mask) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
-	default:
-		return ATA_CBL_PATA40;
-	}
-}
-
-static const struct ide_port_ops cmd64x_port_ops = {
-	.set_pio_mode		= cmd64x_set_pio_mode,
-	.set_dma_mode		= cmd64x_set_dma_mode,
-	.cable_detect		= cmd64x_cable_detect,
-};
-
-static const struct ide_dma_ops cmd64x_dma_ops = {
-	.dma_host_set		= ide_dma_host_set,
-	.dma_setup		= ide_dma_setup,
-	.dma_exec_cmd		= ide_dma_exec_cmd,
-	.dma_start		= ide_dma_start,
-	.dma_end		= cmd64x_dma_end,
-	.dma_test_irq		= cmd64x_dma_test_irq,
-	.dma_lost_irq		= ide_dma_lost_irq,
-	.dma_timeout		= ide_dma_timeout,
-};
-
-static const struct ide_dma_ops cmd646_rev1_dma_ops = {
-	.dma_host_set		= ide_dma_host_set,
-	.dma_setup		= ide_dma_setup,
-	.dma_exec_cmd		= ide_dma_exec_cmd,
-	.dma_start		= ide_dma_start,
-	.dma_end		= cmd646_1_dma_end,
-	.dma_test_irq		= ide_dma_test_irq,
-	.dma_lost_irq		= ide_dma_lost_irq,
-	.dma_timeout		= ide_dma_timeout,
-};
-
-static const struct ide_dma_ops cmd648_dma_ops = {
-	.dma_host_set		= ide_dma_host_set,
-	.dma_setup		= ide_dma_setup,
-	.dma_exec_cmd		= ide_dma_exec_cmd,
-	.dma_start		= ide_dma_start,
-	.dma_end		= cmd648_dma_end,
-	.dma_test_irq		= cmd648_dma_test_irq,
-	.dma_lost_irq		= ide_dma_lost_irq,
-	.dma_timeout		= ide_dma_timeout,
-};
-
-static const struct ide_port_info cmd64x_chipsets[] __devinitdata = {
-	{	/* 0: CMD643 */
-		.name		= DRV_NAME,
-		.init_chipset	= init_chipset_cmd64x,
-		.enablebits	= {{0x00,0x00,0x00}, {0x51,0x08,0x08}},
-		.port_ops	= &cmd64x_port_ops,
-		.dma_ops	= &cmd64x_dma_ops,
-		.host_flags	= IDE_HFLAG_CLEAR_SIMPLEX |
-				  IDE_HFLAG_ABUSE_PREFETCH,
-		.pio_mask	= ATA_PIO5,
-		.mwdma_mask	= ATA_MWDMA2,
-		.udma_mask	= 0x00, /* no udma */
-	},
-	{	/* 1: CMD646 */
-		.name		= DRV_NAME,
-		.init_chipset	= init_chipset_cmd64x,
-		.enablebits	= {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
-		.chipset	= ide_cmd646,
-		.port_ops	= &cmd64x_port_ops,
-		.dma_ops	= &cmd648_dma_ops,
-		.host_flags	= IDE_HFLAG_ABUSE_PREFETCH,
-		.pio_mask	= ATA_PIO5,
-		.mwdma_mask	= ATA_MWDMA2,
-		.udma_mask	= ATA_UDMA2,
-	},
-	{	/* 2: CMD648 */
-		.name		= DRV_NAME,
-		.init_chipset	= init_chipset_cmd64x,
-		.enablebits	= {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
-		.port_ops	= &cmd64x_port_ops,
-		.dma_ops	= &cmd648_dma_ops,
-		.host_flags	= IDE_HFLAG_ABUSE_PREFETCH,
-		.pio_mask	= ATA_PIO5,
-		.mwdma_mask	= ATA_MWDMA2,
-		.udma_mask	= ATA_UDMA4,
-	},
-	{	/* 3: CMD649 */
-		.name		= DRV_NAME,
-		.init_chipset	= init_chipset_cmd64x,
-		.enablebits	= {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
-		.port_ops	= &cmd64x_port_ops,
-		.dma_ops	= &cmd648_dma_ops,
-		.host_flags	= IDE_HFLAG_ABUSE_PREFETCH,
-		.pio_mask	= ATA_PIO5,
-		.mwdma_mask	= ATA_MWDMA2,
-		.udma_mask	= ATA_UDMA5,
-	}
-};
-
-static int __devinit cmd64x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
-	struct ide_port_info d;
-	u8 idx = id->driver_data;
-
-	d = cmd64x_chipsets[idx];
-
-	if (idx == 1) {
-		/*
-		 * UltraDMA only supported on PCI646U and PCI646U2, which
-		 * correspond to revisions 0x03, 0x05 and 0x07 respectively.
-		 * Actually, although the CMD tech support people won't
-		 * tell me the details, the 0x03 revision cannot support
-		 * UDMA correctly without hardware modifications, and even
-		 * then it only works with Quantum disks due to some
-		 * hold time assumptions in the 646U part which are fixed
-		 * in the 646U2.
-		 *
-		 * So we only do UltraDMA on revision 0x05 and 0x07 chipsets.
-		 */
-		if (dev->revision < 5) {
-			d.udma_mask = 0x00;
-			/*
-			 * The original PCI0646 didn't have the primary
-			 * channel enable bit, it appeared starting with
-			 * PCI0646U (i.e. revision ID 3).
-			 */
-			if (dev->revision < 3) {
-				d.enablebits[0].reg = 0;
-				if (dev->revision == 1)
-					d.dma_ops = &cmd646_rev1_dma_ops;
-				else
-					d.dma_ops = &cmd64x_dma_ops;
-			}
-		}
-	}
-
-	return ide_pci_init_one(dev, &d, NULL);
-}
-
-static const struct pci_device_id cmd64x_pci_tbl[] = {
-	{ PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_643), 0 },
-	{ PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_646), 1 },
-	{ PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_648), 2 },
-	{ PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_649), 3 },
-	{ 0, },
-};
-MODULE_DEVICE_TABLE(pci, cmd64x_pci_tbl);
-
-static struct pci_driver cmd64x_pci_driver = {
-	.name		= "CMD64x_IDE",
-	.id_table	= cmd64x_pci_tbl,
-	.probe		= cmd64x_init_one,
-	.remove		= ide_pci_remove,
-	.suspend	= ide_pci_suspend,
-	.resume		= ide_pci_resume,
-};
-
-static int __init cmd64x_ide_init(void)
-{
-	return ide_pci_register_driver(&cmd64x_pci_driver);
-}
-
-static void __exit cmd64x_ide_exit(void)
-{
-	pci_unregister_driver(&cmd64x_pci_driver);
-}
-
-module_init(cmd64x_ide_init);
-module_exit(cmd64x_ide_exit);
-
-MODULE_AUTHOR("Eddie Dost, David Miller, Andre Hedrick");
-MODULE_DESCRIPTION("PCI driver module for CMD64x IDE");
-MODULE_LICENSE("GPL");