summaryrefslogtreecommitdiffstats
path: root/drivers/ide/pci/sc1200.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-17 00:20:36 +0200
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-17 00:20:36 +0200
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/ide/pci/sc1200.c
downloadlinux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.xz
linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/ide/pci/sc1200.c')
-rw-r--r--drivers/ide/pci/sc1200.c518
1 files changed, 518 insertions, 0 deletions
diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c
new file mode 100644
index 000000000000..84fda21e4dbd
--- /dev/null
+++ b/drivers/ide/pci/sc1200.c
@@ -0,0 +1,518 @@
+/*
+ * linux/drivers/ide/pci/sc1200.c Version 0.91 28-Jan-2003
+ *
+ * Copyright (C) 2000-2002 Mark Lord <mlord@pobox.com>
+ * May be copied or modified under the terms of the GNU General Public License
+ *
+ * Development of this chipset driver was funded
+ * by the nice folks at National Semiconductor.
+ *
+ * Documentation:
+ * Available from National Semiconductor
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/ioport.h>
+#include <linux/blkdev.h>
+#include <linux/hdreg.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/ide.h>
+#include <linux/pm.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#define SC1200_REV_A 0x00
+#define SC1200_REV_B1 0x01
+#define SC1200_REV_B3 0x02
+#define SC1200_REV_C1 0x03
+#define SC1200_REV_D1 0x04
+
+#define PCI_CLK_33 0x00
+#define PCI_CLK_48 0x01
+#define PCI_CLK_66 0x02
+#define PCI_CLK_33A 0x03
+
+static unsigned short sc1200_get_pci_clock (void)
+{
+ unsigned char chip_id, silicon_revision;
+ unsigned int pci_clock;
+ /*
+ * Check the silicon revision, as not all versions of the chip
+ * have the register with the fast PCI bus timings.
+ */
+ chip_id = inb (0x903c);
+ silicon_revision = inb (0x903d);
+
+ // Read the fast pci clock frequency
+ if (chip_id == 0x04 && silicon_revision < SC1200_REV_B1) {
+ pci_clock = PCI_CLK_33;
+ } else {
+ // check clock generator configuration (cfcc)
+ // the clock is in bits 8 and 9 of this word
+
+ pci_clock = inw (0x901e);
+ pci_clock >>= 8;
+ pci_clock &= 0x03;
+ if (pci_clock == PCI_CLK_33A)
+ pci_clock = PCI_CLK_33;
+ }
+ return pci_clock;
+}
+
+extern char *ide_xfer_verbose (byte xfer_rate);
+
+/*
+ * Set a new transfer mode at the drive
+ */
+static int sc1200_set_xfer_mode (ide_drive_t *drive, byte mode)
+{
+ printk("%s: sc1200_set_xfer_mode(%s)\n", drive->name, ide_xfer_verbose(mode));
+ return ide_config_drive_speed(drive, mode);
+}
+
+/*
+ * Here are the standard PIO mode 0-4 timings for each "format".
+ * Format-0 uses fast data reg timings, with slower command reg timings.
+ * Format-1 uses fast timings for all registers, but won't work with all drives.
+ */
+static const unsigned int sc1200_pio_timings[4][5] =
+ {{0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010}, // format0 33Mhz
+ {0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010}, // format1, 33Mhz
+ {0xfaa3f4f3, 0xc23232b2, 0x513101c1, 0x31213121, 0x10211021}, // format1, 48Mhz
+ {0xfff4fff4, 0xf35353d3, 0x814102f1, 0x42314231, 0x11311131}}; // format1, 66Mhz
+
+/*
+ * After chip reset, the PIO timings are set to 0x00009172, which is not valid.
+ */
+//#define SC1200_BAD_PIO(timings) (((timings)&~0x80000000)==0x00009172)
+
+static int sc1200_autoselect_dma_mode (ide_drive_t *drive)
+{
+ int udma_ok = 1, mode = 0;
+ ide_hwif_t *hwif = HWIF(drive);
+ int unit = drive->select.b.unit;
+ ide_drive_t *mate = &hwif->drives[unit^1];
+ struct hd_driveid *id = drive->id;
+
+ /*
+ * The SC1200 specifies that two drives sharing a cable cannot
+ * mix UDMA/MDMA. It has to be one or the other, for the pair,
+ * though different timings can still be chosen for each drive.
+ * We could set the appropriate timing bits on the fly,
+ * but that might be a bit confusing. So, for now we statically
+ * handle this requirement by looking at our mate drive to see
+ * what it is capable of, before choosing a mode for our own drive.
+ */
+ if (mate->present) {
+ struct hd_driveid *mateid = mate->id;
+ if (mateid && (mateid->capability & 1) && !__ide_dma_bad_drive(mate)) {
+ if ((mateid->field_valid & 4) && (mateid->dma_ultra & 7))
+ udma_ok = 1;
+ else if ((mateid->field_valid & 2) && (mateid->dma_mword & 7))
+ udma_ok = 0;
+ else
+ udma_ok = 1;
+ }
+ }
+ /*
+ * Now see what the current drive is capable of,
+ * selecting UDMA only if the mate said it was ok.
+ */
+ if (id && (id->capability & 1) && hwif->autodma && !__ide_dma_bad_drive(drive)) {
+ if (udma_ok && (id->field_valid & 4) && (id->dma_ultra & 7)) {
+ if (id->dma_ultra & 4)
+ mode = XFER_UDMA_2;
+ else if (id->dma_ultra & 2)
+ mode = XFER_UDMA_1;
+ else if (id->dma_ultra & 1)
+ mode = XFER_UDMA_0;
+ }
+ if (!mode && (id->field_valid & 2) && (id->dma_mword & 7)) {
+ if (id->dma_mword & 4)
+ mode = XFER_MW_DMA_2;
+ else if (id->dma_mword & 2)
+ mode = XFER_MW_DMA_1;
+ else if (id->dma_mword & 1)
+ mode = XFER_MW_DMA_0;
+ }
+ }
+ return mode;
+}
+
+/*
+ * sc1200_config_dma2() handles selection/setting of DMA/UDMA modes
+ * for both the chipset and drive.
+ */
+static int sc1200_config_dma2 (ide_drive_t *drive, int mode)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ int unit = drive->select.b.unit;
+ unsigned int reg, timings;
+ unsigned short pci_clock;
+ unsigned int basereg = hwif->channel ? 0x50 : 0x40;
+
+ /*
+ * Default to DMA-off in case we run into trouble here.
+ */
+ hwif->ide_dma_off_quietly(drive); /* turn off DMA while we fiddle */
+ outb(inb(hwif->dma_base+2)&~(unit?0x40:0x20), hwif->dma_base+2); /* clear DMA_capable bit */
+
+ /*
+ * Tell the drive to switch to the new mode; abort on failure.
+ */
+ if (!mode || sc1200_set_xfer_mode(drive, mode)) {
+ printk("SC1200: set xfer mode failure\n");
+ return 1; /* failure */
+ }
+
+ pci_clock = sc1200_get_pci_clock();
+
+ /*
+ * Now tune the chipset to match the drive:
+ *
+ * Note that each DMA mode has several timings associated with it.
+ * The correct timing depends on the fast PCI clock freq.
+ */
+ timings = 0;
+ switch (mode) {
+ case XFER_UDMA_0:
+ switch (pci_clock) {
+ case PCI_CLK_33: timings = 0x00921250; break;
+ case PCI_CLK_48: timings = 0x00932470; break;
+ case PCI_CLK_66: timings = 0x009436a1; break;
+ }
+ break;
+ case XFER_UDMA_1:
+ switch (pci_clock) {
+ case PCI_CLK_33: timings = 0x00911140; break;
+ case PCI_CLK_48: timings = 0x00922260; break;
+ case PCI_CLK_66: timings = 0x00933481; break;
+ }
+ break;
+ case XFER_UDMA_2:
+ switch (pci_clock) {
+ case PCI_CLK_33: timings = 0x00911030; break;
+ case PCI_CLK_48: timings = 0x00922140; break;
+ case PCI_CLK_66: timings = 0x00923261; break;
+ }
+ break;
+ case XFER_MW_DMA_0:
+ switch (pci_clock) {
+ case PCI_CLK_33: timings = 0x00077771; break;
+ case PCI_CLK_48: timings = 0x000bbbb2; break;
+ case PCI_CLK_66: timings = 0x000ffff3; break;
+ }
+ break;
+ case XFER_MW_DMA_1:
+ switch (pci_clock) {
+ case PCI_CLK_33: timings = 0x00012121; break;
+ case PCI_CLK_48: timings = 0x00024241; break;
+ case PCI_CLK_66: timings = 0x00035352; break;
+ }
+ break;
+ case XFER_MW_DMA_2:
+ switch (pci_clock) {
+ case PCI_CLK_33: timings = 0x00002020; break;
+ case PCI_CLK_48: timings = 0x00013131; break;
+ case PCI_CLK_66: timings = 0x00015151; break;
+ }
+ break;
+ }
+
+ if (timings == 0) {
+ printk("%s: sc1200_config_dma: huh? mode=%02x clk=%x \n", drive->name, mode, pci_clock);
+ return 1; /* failure */
+ }
+
+ if (unit == 0) { /* are we configuring drive0? */
+ pci_read_config_dword(hwif->pci_dev, basereg+4, &reg);
+ timings |= reg & 0x80000000; /* preserve PIO format bit */
+ pci_write_config_dword(hwif->pci_dev, basereg+4, timings);
+ } else {
+ pci_write_config_dword(hwif->pci_dev, basereg+12, timings);
+ }
+
+ outb(inb(hwif->dma_base+2)|(unit?0x40:0x20), hwif->dma_base+2); /* set DMA_capable bit */
+
+ /*
+ * Finally, turn DMA on in software, and exit.
+ */
+ return hwif->ide_dma_on(drive); /* success */
+}
+
+/*
+ * sc1200_config_dma() handles selection/setting of DMA/UDMA modes
+ * for both the chipset and drive.
+ */
+static int sc1200_config_dma (ide_drive_t *drive)
+{
+ return sc1200_config_dma2(drive, sc1200_autoselect_dma_mode(drive));
+}
+
+
+/* Replacement for the standard ide_dma_end action in
+ * dma_proc.
+ *
+ * returns 1 on error, 0 otherwise
+ */
+static int sc1200_ide_dma_end (ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ unsigned long dma_base = hwif->dma_base;
+ byte dma_stat;
+
+ dma_stat = inb(dma_base+2); /* get DMA status */
+
+ if (!(dma_stat & 4))
+ printk(" ide_dma_end dma_stat=%0x err=%x newerr=%x\n",
+ dma_stat, ((dma_stat&7)!=4), ((dma_stat&2)==2));
+
+ outb(dma_stat|0x1b, dma_base+2); /* clear the INTR & ERROR bits */
+ outb(inb(dma_base)&~1, dma_base); /* !! DO THIS HERE !! stop DMA */
+
+ drive->waiting_for_dma = 0;
+ ide_destroy_dmatable(drive); /* purge DMA mappings */
+
+ return (dma_stat & 7) != 4; /* verify good DMA status */
+}
+
+/*
+ * sc1200_tuneproc() handles selection/setting of PIO modes
+ * for both the chipset and drive.
+ *
+ * All existing BIOSs for this chipset guarantee that all drives
+ * will have valid default PIO timings set up before we get here.
+ */
+static void sc1200_tuneproc (ide_drive_t *drive, byte pio) /* mode=255 means "autotune" */
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ unsigned int format;
+ static byte modes[5] = {XFER_PIO_0, XFER_PIO_1, XFER_PIO_2, XFER_PIO_3, XFER_PIO_4};
+ int mode = -1;
+
+ switch (pio) {
+ case 200: mode = XFER_UDMA_0; break;
+ case 201: mode = XFER_UDMA_1; break;
+ case 202: mode = XFER_UDMA_2; break;
+ case 100: mode = XFER_MW_DMA_0; break;
+ case 101: mode = XFER_MW_DMA_1; break;
+ case 102: mode = XFER_MW_DMA_2; break;
+ }
+ if (mode != -1) {
+ printk("SC1200: %s: changing (U)DMA mode\n", drive->name);
+ (void)sc1200_config_dma2(drive, mode);
+ return;
+ }
+
+ pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ printk("SC1200: %s: setting PIO mode%d\n", drive->name, pio);
+ if (!sc1200_set_xfer_mode(drive, modes[pio])) {
+ unsigned int basereg = hwif->channel ? 0x50 : 0x40;
+ pci_read_config_dword (hwif->pci_dev, basereg+4, &format);
+ format = (format >> 31) & 1;
+ if (format)
+ format += sc1200_get_pci_clock();
+ pci_write_config_dword(hwif->pci_dev, basereg + (drive->select.b.unit << 3), sc1200_pio_timings[format][pio]);
+ }
+}
+
+static ide_hwif_t *lookup_pci_dev (ide_hwif_t *prev, struct pci_dev *dev)
+{
+ int h;
+
+ for (h = 0; h < MAX_HWIFS; h++) {
+ ide_hwif_t *hwif = &ide_hwifs[h];
+ if (prev) {
+ if (hwif == prev)
+ prev = NULL; // found previous, now look for next match
+ } else {
+ if (hwif && hwif->pci_dev == dev)
+ return hwif; // found next match
+ }
+ }
+ return NULL; // not found
+}
+
+typedef struct sc1200_saved_state_s {
+ __u32 regs[4];
+} sc1200_saved_state_t;
+
+
+static int sc1200_suspend (struct pci_dev *dev, u32 state)
+{
+ ide_hwif_t *hwif = NULL;
+
+ printk("SC1200: suspend(%u)\n", state);
+
+ if (state == 0) {
+ // we only save state when going from full power to less
+
+ //
+ // Loop over all interfaces that are part of this PCI device:
+ //
+ while ((hwif = lookup_pci_dev(hwif, dev)) != NULL) {
+ sc1200_saved_state_t *ss;
+ unsigned int basereg, r;
+ //
+ // allocate a permanent save area, if not already allocated
+ //
+ ss = (sc1200_saved_state_t *)hwif->config_data;
+ if (ss == NULL) {
+ ss = kmalloc(sizeof(sc1200_saved_state_t), GFP_KERNEL);
+ if (ss == NULL)
+ return -ENOMEM;
+ hwif->config_data = (unsigned long)ss;
+ }
+ ss = (sc1200_saved_state_t *)hwif->config_data;
+ //
+ // Save timing registers: this may be unnecessary if
+ // BIOS also does it
+ //
+ basereg = hwif->channel ? 0x50 : 0x40;
+ for (r = 0; r < 4; ++r) {
+ pci_read_config_dword (hwif->pci_dev, basereg + (r<<2), &ss->regs[r]);
+ }
+ }
+ }
+
+ /* You don't need to iterate over disks -- sysfs should have done that for you already */
+
+ pci_disable_device(dev);
+ pci_set_power_state(dev,state);
+ dev->current_state = state;
+ return 0;
+}
+
+static int sc1200_resume (struct pci_dev *dev)
+{
+ ide_hwif_t *hwif = NULL;
+
+printk("SC1200: resume\n");
+ pci_set_power_state(dev,0); // bring chip back from sleep state
+ dev->current_state = 0;
+ pci_enable_device(dev);
+ //
+ // loop over all interfaces that are part of this pci device:
+ //
+ while ((hwif = lookup_pci_dev(hwif, dev)) != NULL) {
+ unsigned int basereg, r, d, format;
+ sc1200_saved_state_t *ss = (sc1200_saved_state_t *)hwif->config_data;
+printk("%s: SC1200: resume\n", hwif->name);
+
+ //
+ // Restore timing registers: this may be unnecessary if BIOS also does it
+ //
+ basereg = hwif->channel ? 0x50 : 0x40;
+ if (ss != NULL) {
+ for (r = 0; r < 4; ++r) {
+ pci_write_config_dword(hwif->pci_dev, basereg + (r<<2), ss->regs[r]);
+ }
+ }
+ //
+ // Re-program drive PIO modes
+ //
+ pci_read_config_dword(hwif->pci_dev, basereg+4, &format);
+ format = (format >> 31) & 1;
+ if (format)
+ format += sc1200_get_pci_clock();
+ for (d = 0; d < 2; ++d) {
+ ide_drive_t *drive = &(hwif->drives[d]);
+ if (drive->present) {
+ unsigned int pio, timings;
+ pci_read_config_dword(hwif->pci_dev, basereg+(drive->select.b.unit << 3), &timings);
+ for (pio = 0; pio <= 4; ++pio) {
+ if (sc1200_pio_timings[format][pio] == timings)
+ break;
+ }
+ if (pio > 4)
+ pio = 255; /* autotune */
+ (void)sc1200_tuneproc(drive, pio);
+ }
+ }
+ //
+ // Re-program drive DMA modes
+ //
+ for (d = 0; d < MAX_DRIVES; ++d) {
+ ide_drive_t *drive = &(hwif->drives[d]);
+ if (drive->present && !__ide_dma_bad_drive(drive)) {
+ int was_using_dma = drive->using_dma;
+ hwif->ide_dma_off_quietly(drive);
+ sc1200_config_dma(drive);
+ if (!was_using_dma && drive->using_dma) {
+ hwif->ide_dma_off_quietly(drive);
+ }
+ }
+ }
+ }
+ return 0;
+}
+
+/*
+ * This gets invoked by the IDE driver once for each channel,
+ * and performs channel-specific pre-initialization before drive probing.
+ */
+static void __init init_hwif_sc1200 (ide_hwif_t *hwif)
+{
+ if (hwif->mate)
+ hwif->serialized = hwif->mate->serialized = 1;
+ hwif->autodma = 0;
+ if (hwif->dma_base) {
+ hwif->ide_dma_check = &sc1200_config_dma;
+ hwif->ide_dma_end = &sc1200_ide_dma_end;
+ if (!noautodma)
+ hwif->autodma = 1;
+ hwif->tuneproc = &sc1200_tuneproc;
+ }
+ hwif->atapi_dma = 1;
+ hwif->ultra_mask = 0x07;
+ hwif->mwdma_mask = 0x07;
+
+ hwif->drives[0].autodma = hwif->autodma;
+ hwif->drives[1].autodma = hwif->autodma;
+}
+
+static ide_pci_device_t sc1200_chipset __devinitdata = {
+ .name = "SC1200",
+ .init_hwif = init_hwif_sc1200,
+ .channels = 2,
+ .autodma = AUTODMA,
+ .bootable = ON_BOARD,
+};
+
+static int __devinit sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ return ide_setup_pci_device(dev, &sc1200_chipset);
+}
+
+static struct pci_device_id sc1200_pci_tbl[] = {
+ { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { 0, },
+};
+MODULE_DEVICE_TABLE(pci, sc1200_pci_tbl);
+
+static struct pci_driver driver = {
+ .name = "SC1200_IDE",
+ .id_table = sc1200_pci_tbl,
+ .probe = sc1200_init_one,
+ .suspend = sc1200_suspend,
+ .resume = sc1200_resume,
+};
+
+static int sc1200_ide_init(void)
+{
+ return ide_pci_register_driver(&driver);
+}
+
+module_init(sc1200_ide_init);
+
+MODULE_AUTHOR("Mark Lord");
+MODULE_DESCRIPTION("PCI driver module for NS SC1200 IDE");
+MODULE_LICENSE("GPL");