ide: remove useless subdirs from drivers/ide/

Suggested-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 0 insertions, 270 deletions

diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/pci/tc86c001.c
deleted file mode 100644
index 93e2cce4b296..000000000000
--- a/drivers/ide/pci/tc86c001.c
+++ /dev/null
@@ -1,270 +0,0 @@
-/*
- * Copyright (C) 2002 Toshiba Corporation
- * Copyright (C) 2005-2006 MontaVista Software, Inc. <source@mvista.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-
-#define DRV_NAME "tc86c001"
-
-static void tc86c001_set_mode(ide_drive_t *drive, const u8 speed)
-{
-	ide_hwif_t *hwif	= HWIF(drive);
-	unsigned long scr_port	= hwif->config_data + (drive->dn ? 0x02 : 0x00);
-	u16 mode, scr		= inw(scr_port);
-
-	switch (speed) {
-	case XFER_UDMA_4:	mode = 0x00c0; break;
-	case XFER_UDMA_3:	mode = 0x00b0; break;
-	case XFER_UDMA_2:	mode = 0x00a0; break;
-	case XFER_UDMA_1:	mode = 0x0090; break;
-	case XFER_UDMA_0:	mode = 0x0080; break;
-	case XFER_MW_DMA_2:	mode = 0x0070; break;
-	case XFER_MW_DMA_1:	mode = 0x0060; break;
-	case XFER_MW_DMA_0:	mode = 0x0050; break;
-	case XFER_PIO_4:	mode = 0x0400; break;
-	case XFER_PIO_3:	mode = 0x0300; break;
-	case XFER_PIO_2:	mode = 0x0200; break;
-	case XFER_PIO_1:	mode = 0x0100; break;
-	case XFER_PIO_0:
-	default:		mode = 0x0000; break;
-	}
-
-	scr &= (speed < XFER_MW_DMA_0) ? 0xf8ff : 0xff0f;
-	scr |= mode;
-	outw(scr, scr_port);
-}
-
-static void tc86c001_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
-	tc86c001_set_mode(drive, XFER_PIO_0 + pio);
-}
-
-/*
- * HACKITY HACK
- *
- * This is a workaround for the limitation 5 of the TC86C001 IDE controller:
- * if a DMA transfer terminates prematurely, the controller leaves the device's
- * interrupt request (INTRQ) pending and does not generate a PCI interrupt (or
- * set the interrupt bit in the DMA status register), thus no PCI interrupt
- * will occur until a DMA transfer has been successfully completed.
- *
- * We work around this by initiating dummy, zero-length DMA transfer on
- * a DMA timeout expiration. I found no better way to do this with the current
- * IDE core than to temporarily replace a higher level driver's timer expiry
- * handler with our own backing up to that handler in case our recovery fails.
- */
-static int tc86c001_timer_expiry(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif	= HWIF(drive);
-	ide_expiry_t *expiry	= ide_get_hwifdata(hwif);
-	ide_hwgroup_t *hwgroup	= HWGROUP(drive);
-	u8 dma_stat		= inb(hwif->dma_base + ATA_DMA_STATUS);
-
-	/* Restore a higher level driver's expiry handler first. */
-	hwgroup->expiry	= expiry;
-
-	if ((dma_stat & 5) == 1) {	/* DMA active and no interrupt */
-		unsigned long sc_base	= hwif->config_data;
-		unsigned long twcr_port	= sc_base + (drive->dn ? 0x06 : 0x04);
-		u8 dma_cmd		= inb(hwif->dma_base + ATA_DMA_CMD);
-
-		printk(KERN_WARNING "%s: DMA interrupt possibly stuck, "
-		       "attempting recovery...\n", drive->name);
-
-		/* Stop DMA */
-		outb(dma_cmd & ~0x01, hwif->dma_base + ATA_DMA_CMD);
-
-		/* Setup the dummy DMA transfer */
-		outw(0, sc_base + 0x0a);	/* Sector Count */
-		outw(0, twcr_port);	/* Transfer Word Count 1 or 2 */
-
-		/* Start the dummy DMA transfer */
-
-		/* clear R_OR_WCTR for write */
-		outb(0x00, hwif->dma_base + ATA_DMA_CMD);
-		/* set START_STOPBM */
-		outb(0x01, hwif->dma_base + ATA_DMA_CMD);
-
-		/*
-		 * If an interrupt was pending, it should come thru shortly.
-		 * If not, a higher level driver's expiry handler should
-		 * eventually cause some kind of recovery from the DMA stall.
-		 */
-		return WAIT_MIN_SLEEP;
-	}
-
-	/* Chain to the restored expiry handler if DMA wasn't active. */
-	if (likely(expiry != NULL))
-		return expiry(drive);
-
-	/* If there was no handler, "emulate" that for ide_timer_expiry()... */
-	return -1;
-}
-
-static void tc86c001_dma_start(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif	= HWIF(drive);
-	ide_hwgroup_t *hwgroup	= HWGROUP(drive);
-	unsigned long sc_base	= hwif->config_data;
-	unsigned long twcr_port	= sc_base + (drive->dn ? 0x06 : 0x04);
-	unsigned long nsectors	= hwgroup->rq->nr_sectors;
-
-	/*
-	 * We have to manually load the sector count and size into
-	 * the appropriate system control registers for DMA to work
-	 * with LBA48 and ATAPI devices...
-	 */
-	outw(nsectors, sc_base + 0x0a);	/* Sector Count */
-	outw(SECTOR_SIZE / 2, twcr_port); /* Transfer Word Count 1/2 */
-
-	/* Install our timeout expiry hook, saving the current handler... */
-	ide_set_hwifdata(hwif, hwgroup->expiry);
-	hwgroup->expiry = &tc86c001_timer_expiry;
-
-	ide_dma_start(drive);
-}
-
-static u8 tc86c001_cable_detect(ide_hwif_t *hwif)
-{
-	struct pci_dev *dev = to_pci_dev(hwif->dev);
-	unsigned long sc_base = pci_resource_start(dev, 5);
-	u16 scr1 = inw(sc_base + 0x00);
-
-	/*
-	 * System Control  1 Register bit 13 (PDIAGN):
-	 * 0=80-pin cable, 1=40-pin cable
-	 */
-	return (scr1 & 0x2000) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
-}
-
-static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif)
-{
-	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	unsigned long sc_base	= pci_resource_start(dev, 5);
-	u16 scr1		= inw(sc_base + 0x00);
-
-	/* System Control 1 Register bit 15 (Soft Reset) set */
-	outw(scr1 |  0x8000, sc_base + 0x00);
-
-	/* System Control 1 Register bit 14 (FIFO Reset) set */
-	outw(scr1 |  0x4000, sc_base + 0x00);
-
-	/* System Control 1 Register: reset clear */
-	outw(scr1 & ~0xc000, sc_base + 0x00);
-
-	/* Store the system control register base for convenience... */
-	hwif->config_data = sc_base;
-
-	if (!hwif->dma_base)
-		return;
-
-	/*
-	 * Sector Count Control Register bits 0 and 1 set:
-	 * software sets Sector Count Register for master and slave device
-	 */
-	outw(0x0003, sc_base + 0x0c);
-
-	/* Sector Count Register limit */
-	hwif->rqsize	 = 0xffff;
-}
-
-static const struct ide_port_ops tc86c001_port_ops = {
-	.set_pio_mode		= tc86c001_set_pio_mode,
-	.set_dma_mode		= tc86c001_set_mode,
-	.cable_detect		= tc86c001_cable_detect,
-};
-
-static const struct ide_dma_ops tc86c001_dma_ops = {
-	.dma_host_set		= ide_dma_host_set,
-	.dma_setup		= ide_dma_setup,
-	.dma_exec_cmd		= ide_dma_exec_cmd,
-	.dma_start		= tc86c001_dma_start,
-	.dma_end		= ide_dma_end,
-	.dma_test_irq		= ide_dma_test_irq,
-	.dma_lost_irq		= ide_dma_lost_irq,
-	.dma_timeout		= ide_dma_timeout,
-};
-
-static const struct ide_port_info tc86c001_chipset __devinitdata = {
-	.name		= DRV_NAME,
-	.init_hwif	= init_hwif_tc86c001,
-	.port_ops	= &tc86c001_port_ops,
-	.dma_ops	= &tc86c001_dma_ops,
-	.host_flags	= IDE_HFLAG_SINGLE | IDE_HFLAG_OFF_BOARD,
-	.pio_mask	= ATA_PIO4,
-	.mwdma_mask	= ATA_MWDMA2,
-	.udma_mask	= ATA_UDMA4,
-};
-
-static int __devinit tc86c001_init_one(struct pci_dev *dev,
-				       const struct pci_device_id *id)
-{
-	int rc;
-
-	rc = pci_enable_device(dev);
-	if (rc)
-		goto out;
-
-	rc = pci_request_region(dev, 5, DRV_NAME);
-	if (rc) {
-		printk(KERN_ERR DRV_NAME ": system control regs already in use");
-		goto out_disable;
-	}
-
-	rc = ide_pci_init_one(dev, &tc86c001_chipset, NULL);
-	if (rc)
-		goto out_release;
-
-	goto out;
-
-out_release:
-	pci_release_region(dev, 5);
-out_disable:
-	pci_disable_device(dev);
-out:
-	return rc;
-}
-
-static void __devexit tc86c001_remove(struct pci_dev *dev)
-{
-	ide_pci_remove(dev);
-	pci_release_region(dev, 5);
-	pci_disable_device(dev);
-}
-
-static const struct pci_device_id tc86c001_pci_tbl[] = {
-	{ PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE), 0 },
-	{ 0, }
-};
-MODULE_DEVICE_TABLE(pci, tc86c001_pci_tbl);
-
-static struct pci_driver tc86c001_pci_driver = {
-	.name		= "TC86C001",
-	.id_table	= tc86c001_pci_tbl,
-	.probe		= tc86c001_init_one,
-	.remove		= __devexit_p(tc86c001_remove),
-};
-
-static int __init tc86c001_ide_init(void)
-{
-	return ide_pci_register_driver(&tc86c001_pci_driver);
-}
-
-static void __exit tc86c001_ide_exit(void)
-{
-	pci_unregister_driver(&tc86c001_pci_driver);
-}
-
-module_init(tc86c001_ide_init);
-module_exit(tc86c001_ide_exit);
-
-MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>");
-MODULE_DESCRIPTION("PCI driver module for TC86C001 IDE");
-MODULE_LICENSE("GPL");