ieee1394: remove the old IEEE 1394 driver stack

The drivers
  - ohci1394 (controller driver)
  - ieee1394 (core)
  - dv1394, raw1394, video1394 (userspace ABI)
  - eth1394, sbp2 (protocol drivers)
are replaced by
  - firewire-ohci (controller driver)
  - firewire-core (core and userspace ABI)
  - firewire-net, firewire-sbp2 (protocol drivers)
which are more featureful, better performing, and more secure than the older
drivers; all with a smaller and more modern code base.

The driver firedtv in drivers/media/dvb/firewire/ contains backends to both
ieee1394 and firewire-core.  Its ieee1394 backend code can be removed in an
independent commit; firedtv as-is builds and works fine without ieee1394.

The driver pcilynx (an incomplete controller driver) is deleted without
replacement since PCILynx cards are extremely rare.  Owners of these cards
use them with the stand-alone bus sniffer driver nosy instead.

The drivers nosy and init_ohci1394_dma which do not interact with either of
the two IEEE 1394 stacks are not affected by the ieee1394 subsystem removal.

There are still some issues with the newer firewire subsystem compared to
the older one:
  - The rare and quirky controllers ALi M52xx, Apple UniNorth v1, NVIDIA
    NForce2 are even less well supported by firewire-ohci than by ohci1394.
    I am looking into the M52xx issue.
  - The experimental firewire-net is reportedly less stable than its
    experimental cousin eth1394.
  - Audio playback of a certain group of audio devices (ones based on DICE
    chipset with EAP; supported by prerelease FFADO code) does not work yet.
    This issue is still under investigation.
  - There were some ieee1394 based out-of-the-mainline drivers.  Of them,
    only lisight, an audio driver for iSight webcams, seems still useful.
    Work is underway to reimplement it on top of firewire-core.

All these remainig issues are minor; they should not stand in the way of
overall better user experience of IEEE 1394 on Linux, together with a
reduction in support efforts and maintenance burden.  The coexistence of two
IEEE 1394 kernel driver stacks in the mainline since 2.6.22 shall end now,
as announced earlier this year.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>

1 files changed, 0 insertions, 249 deletions

diff --git a/drivers/ieee1394/hosts.c b/drivers/ieee1394/hosts.c
deleted file mode 100644
index e947d8ffac85..000000000000
--- a/drivers/ieee1394/hosts.c
+++ /dev/null
@@ -1,249 +0,0 @@
-/*
- * IEEE 1394 for Linux
- *
- * Low level (host adapter) management.
- *
- * Copyright (C) 1999 Andreas E. Bombe
- * Copyright (C) 1999 Emanuel Pirker
- *
- * This code is licensed under the GPL.  See the file COPYING in the root
- * directory of the kernel sources for details.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/list.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/timer.h>
-#include <linux/jiffies.h>
-#include <linux/mutex.h>
-
-#include "csr1212.h"
-#include "ieee1394.h"
-#include "ieee1394_types.h"
-#include "hosts.h"
-#include "ieee1394_core.h"
-#include "highlevel.h"
-#include "nodemgr.h"
-#include "csr.h"
-#include "config_roms.h"
-
-
-static void delayed_reset_bus(struct work_struct *work)
-{
-	struct hpsb_host *host =
-		container_of(work, struct hpsb_host, delayed_reset.work);
-	u8 generation = host->csr.generation + 1;
-
-	/* The generation field rolls over to 2 rather than 0 per IEEE
-	 * 1394a-2000. */
-	if (generation > 0xf || generation < 2)
-		generation = 2;
-
-	csr_set_bus_info_generation(host->csr.rom, generation);
-	if (csr1212_generate_csr_image(host->csr.rom) != CSR1212_SUCCESS) {
-		/* CSR image creation failed.
-		 * Reset generation field and do not issue a bus reset. */
-		csr_set_bus_info_generation(host->csr.rom,
-					    host->csr.generation);
-		return;
-	}
-
-	host->csr.generation = generation;
-
-	host->update_config_rom = 0;
-	if (host->driver->set_hw_config_rom)
-		host->driver->set_hw_config_rom(host,
-						host->csr.rom->bus_info_data);
-
-	host->csr.gen_timestamp[host->csr.generation] = jiffies;
-	hpsb_reset_bus(host, SHORT_RESET);
-}
-
-static int dummy_transmit_packet(struct hpsb_host *h, struct hpsb_packet *p)
-{
-	return 0;
-}
-
-static int dummy_devctl(struct hpsb_host *h, enum devctl_cmd c, int arg)
-{
-	return -1;
-}
-
-static int dummy_isoctl(struct hpsb_iso *iso, enum isoctl_cmd command,
-			unsigned long arg)
-{
-	return -1;
-}
-
-static struct hpsb_host_driver dummy_driver = {
-	.transmit_packet = dummy_transmit_packet,
-	.devctl =	   dummy_devctl,
-	.isoctl =	   dummy_isoctl
-};
-
-static int alloc_hostnum_cb(struct hpsb_host *host, void *__data)
-{
-	int *hostnum = __data;
-
-	if (host->id == *hostnum)
-		return 1;
-
-	return 0;
-}
-
-static DEFINE_MUTEX(host_num_alloc);
-
-/**
- * hpsb_alloc_host - allocate a new host controller.
- * @drv: the driver that will manage the host controller
- * @extra: number of extra bytes to allocate for the driver
- *
- * Allocate a &hpsb_host and initialize the general subsystem specific
- * fields.  If the driver needs to store per host data, as drivers
- * usually do, the amount of memory required can be specified by the
- * @extra parameter.  Once allocated, the driver should initialize the
- * driver specific parts, enable the controller and make it available
- * to the general subsystem using hpsb_add_host().
- *
- * Return Value: a pointer to the &hpsb_host if successful, %NULL if
- * no memory was available.
- */
-struct hpsb_host *hpsb_alloc_host(struct hpsb_host_driver *drv, size_t extra,
-				  struct device *dev)
-{
-	struct hpsb_host *h;
-	int i;
-	int hostnum = 0;
-
-	h = kzalloc(sizeof(*h) + extra, GFP_KERNEL);
-	if (!h)
-		return NULL;
-
-	h->csr.rom = csr1212_create_csr(&csr_bus_ops, CSR_BUS_INFO_SIZE, h);
-	if (!h->csr.rom)
-		goto fail;
-
-	h->hostdata = h + 1;
-	h->driver = drv;
-
-	INIT_LIST_HEAD(&h->pending_packets);
-	INIT_LIST_HEAD(&h->addr_space);
-
-	for (i = 2; i < 16; i++)
-		h->csr.gen_timestamp[i] = jiffies - 60 * HZ;
-
-	atomic_set(&h->generation, 0);
-
-	INIT_DELAYED_WORK(&h->delayed_reset, delayed_reset_bus);
-	
-	init_timer(&h->timeout);
-	h->timeout.data = (unsigned long) h;
-	h->timeout.function = abort_timedouts;
-	h->timeout_interval = HZ / 20; /* 50ms, half of minimum SPLIT_TIMEOUT */
-
-	h->topology_map = h->csr.topology_map + 3;
-	h->speed_map = (u8 *)(h->csr.speed_map + 2);
-
-	mutex_lock(&host_num_alloc);
-	while (nodemgr_for_each_host(&hostnum, alloc_hostnum_cb))
-		hostnum++;
-	mutex_unlock(&host_num_alloc);
-	h->id = hostnum;
-
-	memcpy(&h->device, &nodemgr_dev_template_host, sizeof(h->device));
-	h->device.parent = dev;
-	set_dev_node(&h->device, dev_to_node(dev));
-	dev_set_name(&h->device, "fw-host%d", h->id);
-
-	h->host_dev.parent = &h->device;
-	h->host_dev.class = &hpsb_host_class;
-	dev_set_name(&h->host_dev, "fw-host%d", h->id);
-
-	if (device_register(&h->device))
-		goto fail;
-	if (device_register(&h->host_dev)) {
-		device_unregister(&h->device);
-		goto fail;
-	}
-	get_device(&h->device);
-
-	return h;
-
-fail:
-	kfree(h);
-	return NULL;
-}
-
-int hpsb_add_host(struct hpsb_host *host)
-{
-	if (hpsb_default_host_entry(host))
-		return -ENOMEM;
-
-	highlevel_add_host(host);
-	return 0;
-}
-
-void hpsb_resume_host(struct hpsb_host *host)
-{
-	if (host->driver->set_hw_config_rom)
-		host->driver->set_hw_config_rom(host,
-						host->csr.rom->bus_info_data);
-	host->driver->devctl(host, RESET_BUS, SHORT_RESET);
-}
-
-void hpsb_remove_host(struct hpsb_host *host)
-{
-	host->is_shutdown = 1;
-
-	cancel_delayed_work(&host->delayed_reset);
-	flush_scheduled_work();
-
-	host->driver = &dummy_driver;
-	highlevel_remove_host(host);
-
-	device_unregister(&host->host_dev);
-	device_unregister(&host->device);
-}
-
-/**
- * hpsb_update_config_rom_image - updates configuration ROM image of a host
- *
- * Updates the configuration ROM image of a host.  rom_version must be the
- * current version, otherwise it will fail with return value -1. If this
- * host does not support config-rom-update, it will return -%EINVAL.
- * Return value 0 indicates success.
- */
-int hpsb_update_config_rom_image(struct hpsb_host *host)
-{
-	unsigned long reset_delay;
-	int next_gen = host->csr.generation + 1;
-
-	if (!host->update_config_rom)
-		return -EINVAL;
-
-	if (next_gen > 0xf)
-		next_gen = 2;
-
-	/* Stop the delayed interrupt, we're about to change the config rom and
-	 * it would be a waste to do a bus reset twice. */
-	cancel_delayed_work(&host->delayed_reset);
-
-	/* IEEE 1394a-2000 prohibits using the same generation number
-	 * twice in a 60 second period. */
-	if (time_before(jiffies, host->csr.gen_timestamp[next_gen] + 60 * HZ))
-		/* Wait 60 seconds from the last time this generation number was
-		 * used. */
-		reset_delay =
-			(60 * HZ) + host->csr.gen_timestamp[next_gen] - jiffies;
-	else
-		/* Wait 1 second in case some other code wants to change the
-		 * Config ROM in the near future. */
-		reset_delay = HZ;
-
-	PREPARE_DELAYED_WORK(&host->delayed_reset, delayed_reset_bus);
-	schedule_delayed_work(&host->delayed_reset, reset_delay);
-
-	return 0;
-}