Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 484 insertions, 0 deletions

diff --git a/drivers/ieee1394/sbp2.h b/drivers/ieee1394/sbp2.h
new file mode 100644
index 000000000000..a84b039a05b9
--- /dev/null
+++ b/drivers/ieee1394/sbp2.h
@@ -0,0 +1,484 @@
+/*
+ * sbp2.h - Defines and prototypes for sbp2.c
+ *
+ * Copyright (C) 2000 James Goodwin, Filanet Corporation (www.filanet.com)
+ * jamesg@filanet.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef SBP2_H
+#define SBP2_H
+
+#define SBP2_DEVICE_NAME		"sbp2"
+
+/*
+ * SBP2 specific structures and defines
+ */
+
+#define ORB_DIRECTION_WRITE_TO_MEDIA    0x0
+#define ORB_DIRECTION_READ_FROM_MEDIA   0x1
+#define ORB_DIRECTION_NO_DATA_TRANSFER  0x2
+
+#define ORB_SET_NULL_PTR(value)			((value & 0x1) << 31)
+#define ORB_SET_NOTIFY(value)                   ((value & 0x1) << 31)
+#define ORB_SET_RQ_FMT(value)                   ((value & 0x3) << 29)	/* unused ? */
+#define ORB_SET_NODE_ID(value)			((value & 0xffff) << 16)
+#define ORB_SET_DATA_SIZE(value)                (value & 0xffff)
+#define ORB_SET_PAGE_SIZE(value)                ((value & 0x7) << 16)
+#define ORB_SET_PAGE_TABLE_PRESENT(value)       ((value & 0x1) << 19)
+#define ORB_SET_MAX_PAYLOAD(value)              ((value & 0xf) << 20)
+#define ORB_SET_SPEED(value)                    ((value & 0x7) << 24)
+#define ORB_SET_DIRECTION(value)                ((value & 0x1) << 27)
+
+struct sbp2_command_orb {
+	volatile u32 next_ORB_hi;
+	volatile u32 next_ORB_lo;
+	u32 data_descriptor_hi;
+	u32 data_descriptor_lo;
+	u32 misc;
+	u8 cdb[12];
+};
+
+#define SBP2_LOGIN_REQUEST		0x0
+#define SBP2_QUERY_LOGINS_REQUEST	0x1
+#define SBP2_RECONNECT_REQUEST		0x3
+#define SBP2_SET_PASSWORD_REQUEST	0x4
+#define SBP2_LOGOUT_REQUEST		0x7
+#define SBP2_ABORT_TASK_REQUEST		0xb
+#define SBP2_ABORT_TASK_SET		0xc
+#define SBP2_LOGICAL_UNIT_RESET		0xe
+#define SBP2_TARGET_RESET_REQUEST	0xf
+
+#define ORB_SET_LUN(value)                      (value & 0xffff)
+#define ORB_SET_FUNCTION(value)                 ((value & 0xf) << 16)
+#define ORB_SET_RECONNECT(value)                ((value & 0xf) << 20)
+#define ORB_SET_EXCLUSIVE(value)                ((value & 0x1) << 28)
+#define ORB_SET_LOGIN_RESP_LENGTH(value)        (value & 0xffff)
+#define ORB_SET_PASSWD_LENGTH(value)            ((value & 0xffff) << 16)
+
+struct sbp2_login_orb {
+	u32 password_hi;
+	u32 password_lo;
+	u32 login_response_hi;
+	u32 login_response_lo;
+	u32 lun_misc;
+	u32 passwd_resp_lengths;
+	u32 status_FIFO_hi;
+	u32 status_FIFO_lo;
+};
+
+#define RESPONSE_GET_LOGIN_ID(value)            (value & 0xffff)
+#define RESPONSE_GET_LENGTH(value)              ((value >> 16) & 0xffff)
+#define RESPONSE_GET_RECONNECT_HOLD(value)      (value & 0xffff)
+
+struct sbp2_login_response {
+	u32 length_login_ID;
+	u32 command_block_agent_hi;
+	u32 command_block_agent_lo;
+	u32 reconnect_hold;
+};
+
+#define ORB_SET_LOGIN_ID(value)                 (value & 0xffff)
+
+#define ORB_SET_QUERY_LOGINS_RESP_LENGTH(value) (value & 0xffff)
+
+struct sbp2_query_logins_orb {
+	u32 reserved1;
+	u32 reserved2;
+	u32 query_response_hi;
+	u32 query_response_lo;
+	u32 lun_misc;
+	u32 reserved_resp_length;
+	u32 status_FIFO_hi;
+	u32 status_FIFO_lo;
+};
+
+#define RESPONSE_GET_MAX_LOGINS(value)          (value & 0xffff)
+#define RESPONSE_GET_ACTIVE_LOGINS(value)       ((RESPONSE_GET_LENGTH(value) - 4) / 12)
+
+struct sbp2_query_logins_response {
+	u32 length_max_logins;
+	u32 misc_IDs;
+	u32 initiator_misc_hi;
+	u32 initiator_misc_lo;
+};
+
+struct sbp2_reconnect_orb {
+	u32 reserved1;
+	u32 reserved2;
+        u32 reserved3;
+        u32 reserved4;
+	u32 login_ID_misc;
+	u32 reserved5;
+	u32 status_FIFO_hi;
+	u32 status_FIFO_lo;
+};
+
+struct sbp2_logout_orb {
+	u32 reserved1;
+	u32 reserved2;
+        u32 reserved3;
+        u32 reserved4;
+	u32 login_ID_misc;
+	u32 reserved5;
+	u32 status_FIFO_hi;
+	u32 status_FIFO_lo;
+};
+
+#define PAGE_TABLE_SET_SEGMENT_BASE_HI(value)   (value & 0xffff)
+#define PAGE_TABLE_SET_SEGMENT_LENGTH(value)    ((value & 0xffff) << 16)
+
+struct sbp2_unrestricted_page_table {
+	u32 length_segment_base_hi;
+	u32 segment_base_lo;
+};
+
+#define RESP_STATUS_REQUEST_COMPLETE		0x0
+#define RESP_STATUS_TRANSPORT_FAILURE		0x1
+#define RESP_STATUS_ILLEGAL_REQUEST		0x2
+#define RESP_STATUS_VENDOR_DEPENDENT		0x3
+
+#define SBP2_STATUS_NO_ADDITIONAL_INFO		0x0
+#define SBP2_STATUS_REQ_TYPE_NOT_SUPPORTED	0x1
+#define SBP2_STATUS_SPEED_NOT_SUPPORTED		0x2
+#define SBP2_STATUS_PAGE_SIZE_NOT_SUPPORTED	0x3
+#define SBP2_STATUS_ACCESS_DENIED		0x4
+#define SBP2_STATUS_LU_NOT_SUPPORTED		0x5
+#define SBP2_STATUS_MAX_PAYLOAD_TOO_SMALL	0x6
+#define SBP2_STATUS_RESOURCES_UNAVAILABLE	0x8
+#define SBP2_STATUS_FUNCTION_REJECTED		0x9
+#define SBP2_STATUS_LOGIN_ID_NOT_RECOGNIZED	0xa
+#define SBP2_STATUS_DUMMY_ORB_COMPLETED		0xb
+#define SBP2_STATUS_REQUEST_ABORTED		0xc
+#define SBP2_STATUS_UNSPECIFIED_ERROR		0xff
+
+#define SFMT_CURRENT_ERROR			0x0
+#define SFMT_DEFERRED_ERROR			0x1
+#define SFMT_VENDOR_DEPENDENT_STATUS		0x3
+
+#define SBP2_SCSI_STATUS_GOOD			0x0
+#define SBP2_SCSI_STATUS_CHECK_CONDITION	0x2
+#define SBP2_SCSI_STATUS_CONDITION_MET		0x4
+#define SBP2_SCSI_STATUS_BUSY			0x8
+#define SBP2_SCSI_STATUS_RESERVATION_CONFLICT	0x18
+#define SBP2_SCSI_STATUS_COMMAND_TERMINATED	0x22
+
+#define SBP2_SCSI_STATUS_SELECTION_TIMEOUT	0xff
+
+#define STATUS_GET_ORB_OFFSET_HI(value)         (value & 0xffff)
+#define STATUS_GET_SBP_STATUS(value)            ((value >> 16) & 0xff)
+#define STATUS_GET_LENGTH(value)                ((value >> 24) & 0x7)
+#define STATUS_GET_DEAD_BIT(value)              ((value >> 27) & 0x1)
+#define STATUS_GET_RESP(value)                  ((value >> 28) & 0x3)
+#define STATUS_GET_SRC(value)                   ((value >> 30) & 0x3)
+
+struct sbp2_status_block {
+	u32 ORB_offset_hi_misc;
+	u32 ORB_offset_lo;
+        u8 command_set_dependent[24];
+};
+
+/*
+ * Miscellaneous SBP2 related config rom defines
+ */
+
+/* The status fifo address definition below is used as a base for each
+ * node, which a chunk seperately assigned to each unit directory in the
+ * node.  For example, 0xfffe00000000ULL is used for the first sbp2 device
+ * detected on node 0, 0xfffe00000020ULL for the next sbp2 device on node
+ * 0, and so on.
+ *
+ * Note: We could use a single status fifo address for all sbp2 devices,
+ * and figure out which sbp2 device the status belongs to by looking at
+ * the source node id of the status write... but, using separate addresses
+ * for each sbp2 unit directory allows for better code and the ability to
+ * support multiple luns within a single 1394 node.
+ *
+ * Also note that we choose the address range below as it is a region
+ * specified for write posting, where the ohci controller will
+ * automatically send an ack_complete when the status is written by the
+ * sbp2 device... saving a split transaction.   =)
+ */ 
+#define SBP2_STATUS_FIFO_ADDRESS				0xfffe00000000ULL
+#define SBP2_STATUS_FIFO_ADDRESS_HI                             0xfffe
+#define SBP2_STATUS_FIFO_ADDRESS_LO                             0x0
+
+#define SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(entry)			((entry) << 5)
+#define SBP2_STATUS_FIFO_OFFSET_TO_ENTRY(offset)		((offset) >> 5)
+
+#define SBP2_UNIT_DIRECTORY_OFFSET_KEY				0xd1
+#define SBP2_CSR_OFFSET_KEY					0x54
+#define SBP2_UNIT_SPEC_ID_KEY					0x12
+#define SBP2_UNIT_SW_VERSION_KEY				0x13
+#define SBP2_COMMAND_SET_SPEC_ID_KEY				0x38
+#define SBP2_COMMAND_SET_KEY					0x39
+#define SBP2_UNIT_CHARACTERISTICS_KEY				0x3a
+#define SBP2_DEVICE_TYPE_AND_LUN_KEY				0x14
+#define SBP2_FIRMWARE_REVISION_KEY				0x3c
+
+#define SBP2_DEVICE_TYPE(q)					(((q) >> 16) & 0x1f)
+#define SBP2_DEVICE_LUN(q)					((q) & 0xffff)
+
+#define SBP2_AGENT_STATE_OFFSET					0x00ULL
+#define SBP2_AGENT_RESET_OFFSET					0x04ULL
+#define SBP2_ORB_POINTER_OFFSET					0x08ULL
+#define SBP2_DOORBELL_OFFSET					0x10ULL
+#define SBP2_UNSOLICITED_STATUS_ENABLE_OFFSET			0x14ULL
+#define SBP2_UNSOLICITED_STATUS_VALUE				0xf
+
+#define SBP2_BUSY_TIMEOUT_ADDRESS				0xfffff0000210ULL
+#define SBP2_BUSY_TIMEOUT_VALUE					0xf
+
+#define SBP2_AGENT_RESET_DATA					0xf
+
+/*
+ * Unit spec id and sw version entry for SBP-2 devices
+ */
+
+#define SBP2_UNIT_SPEC_ID_ENTRY					0x0000609e
+#define SBP2_SW_VERSION_ENTRY					0x00010483
+
+/*
+ * Other misc defines
+ */
+#define SBP2_128KB_BROKEN_FIRMWARE				0xa0b800
+
+#define SBP2_DEVICE_TYPE_LUN_UNINITIALIZED			0xffffffff
+
+/*
+ * SCSI specific stuff
+ */
+
+#define SBP2_MAX_SG_ELEMENT_LENGTH	0xf000
+#define SBP2_MAX_UDS_PER_NODE		16	/* Maximum scsi devices per node */
+#define SBP2_MAX_SECTORS		255	/* Max sectors supported */
+
+#ifndef TYPE_SDAD
+#define TYPE_SDAD			0x0e	/* simplified direct access device */
+#endif
+
+/*
+ * SCSI direction table...
+ * (now used as a back-up in case the direction passed down from above is "unknown")
+ *
+ * DIN = IN data direction
+ * DOU = OUT data direction
+ * DNO = No data transfer
+ * DUN = Unknown data direction
+ *
+ * Opcode 0xec (Teac specific "opc execute") possibly should be DNO,
+ * but we'll change it when somebody reports a problem with this.
+ */
+#define DIN				ORB_DIRECTION_READ_FROM_MEDIA
+#define DOU				ORB_DIRECTION_WRITE_TO_MEDIA
+#define DNO				ORB_DIRECTION_NO_DATA_TRANSFER
+#define DUN				DIN
+
+static unchar sbp2scsi_direction_table[0x100] = {
+	DNO,DNO,DIN,DIN,DOU,DIN,DIN,DOU,DIN,DUN,DOU,DOU,DUN,DUN,DUN,DIN,
+	DNO,DIN,DIN,DOU,DIN,DOU,DNO,DNO,DOU,DNO,DIN,DNO,DIN,DOU,DNO,DUN,
+	DIN,DUN,DIN,DIN,DOU,DIN,DUN,DUN,DIN,DIN,DOU,DNO,DUN,DIN,DOU,DOU,
+	DOU,DOU,DOU,DNO,DIN,DNO,DNO,DIN,DOU,DOU,DOU,DOU,DIN,DOU,DIN,DOU,
+	DOU,DOU,DIN,DIN,DIN,DNO,DIN,DNO,DNO,DNO,DUN,DNO,DOU,DIN,DNO,DUN,
+	DUN,DIN,DIN,DNO,DNO,DOU,DUN,DUN,DNO,DIN,DIN,DNO,DIN,DOU,DUN,DUN,
+	DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,
+	DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,
+	DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,
+	DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,
+	DUN,DNO,DOU,DOU,DIN,DNO,DNO,DNO,DIN,DNO,DOU,DUN,DNO,DIN,DOU,DOU,
+	DOU,DOU,DOU,DNO,DUN,DIN,DOU,DIN,DIN,DIN,DNO,DNO,DNO,DIN,DIN,DUN,
+	DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,
+	DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,
+	DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DOU,DUN,DUN,DUN,DUN,DUN,
+	DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN
+};
+
+/* This should be safe */
+#define SBP2_MAX_CMDS		8
+
+/* This is the two dma types we use for cmd_dma below */
+enum cmd_dma_types {
+	CMD_DMA_NONE,
+	CMD_DMA_PAGE,
+	CMD_DMA_SINGLE
+};
+
+/*
+ * Encapsulates all the info necessary for an outstanding command.
+ */
+struct sbp2_command_info {
+
+	struct list_head list;
+	struct sbp2_command_orb command_orb ____cacheline_aligned;
+	dma_addr_t command_orb_dma ____cacheline_aligned;
+	struct scsi_cmnd *Current_SCpnt;
+	void (*Current_done)(struct scsi_cmnd *);
+
+	/* Also need s/g structure for each sbp2 command */
+	struct sbp2_unrestricted_page_table scatter_gather_element[SG_ALL] ____cacheline_aligned;
+	dma_addr_t sge_dma ____cacheline_aligned;
+	void *sge_buffer;
+	dma_addr_t cmd_dma;
+	enum cmd_dma_types dma_type;
+	unsigned long dma_size;
+	int dma_dir;
+
+};
+
+/* A list of flags for detected oddities and brokeness. */
+#define SBP2_BREAKAGE_128K_MAX_TRANSFER		0x1
+#define SBP2_BREAKAGE_INQUIRY_HACK		0x2
+
+
+struct sbp2scsi_host_info;
+
+
+/*
+ * Information needed on a per scsi id basis (one for each sbp2 device)
+ */
+struct scsi_id_instance_data {
+	/*
+	 * Various sbp2 specific structures
+	 */
+	struct sbp2_command_orb *last_orb;
+	dma_addr_t last_orb_dma;
+	struct sbp2_login_orb *login_orb;
+	dma_addr_t login_orb_dma;
+	struct sbp2_login_response *login_response;
+	dma_addr_t login_response_dma;
+	struct sbp2_query_logins_orb *query_logins_orb;
+	dma_addr_t query_logins_orb_dma;
+	struct sbp2_query_logins_response *query_logins_response;
+	dma_addr_t query_logins_response_dma;
+	struct sbp2_reconnect_orb *reconnect_orb;
+	dma_addr_t reconnect_orb_dma;
+	struct sbp2_logout_orb *logout_orb;
+	dma_addr_t logout_orb_dma;
+	struct sbp2_status_block status_block;
+
+	/*
+	 * Stuff we need to know about the sbp2 device itself
+	 */
+	u64 sbp2_management_agent_addr;
+	u64 sbp2_command_block_agent_addr;
+	u32 speed_code;
+	u32 max_payload_size;
+
+	/*
+	 * Values pulled from the device's unit directory
+	 */
+	u32 sbp2_command_set_spec_id;
+	u32 sbp2_command_set;
+	u32 sbp2_unit_characteristics;
+	u32 sbp2_device_type_and_lun;
+	u32 sbp2_firmware_revision;
+
+	/*
+	 * Variable used for logins, reconnects, logouts, query logins
+	 */
+	atomic_t sbp2_login_complete;
+
+	/*
+	 * Pool of command orbs, so we can have more than overlapped command per id
+	 */
+	spinlock_t sbp2_command_orb_lock;
+	struct list_head sbp2_command_orb_inuse;
+	struct list_head sbp2_command_orb_completed;
+
+	struct list_head scsi_list;
+
+	/* Node entry, as retrieved from NodeMgr entries */
+	struct node_entry *ne;
+	struct unit_directory *ud;
+
+	/* A backlink to our host_info */
+	struct sbp2scsi_host_info *hi;
+
+	/* SCSI related pointers */
+	struct scsi_device *sdev;
+	struct Scsi_Host *scsi_host;
+
+	/* Device specific workarounds/brokeness */
+	u32 workarounds;
+};
+
+
+/* Sbp2 host data structure (one per IEEE1394 host) */
+struct sbp2scsi_host_info {
+	struct hpsb_host *host;		/* IEEE1394 host */
+	struct list_head scsi_ids;	/* List of scsi ids on this host */
+};
+
+/*
+ * Function prototypes
+ */
+
+/*
+ * Various utility prototypes
+ */
+static int sbp2util_create_command_orb_pool(struct scsi_id_instance_data *scsi_id);
+static void sbp2util_remove_command_orb_pool(struct scsi_id_instance_data *scsi_id);
+static struct sbp2_command_info *sbp2util_find_command_for_orb(struct scsi_id_instance_data *scsi_id, dma_addr_t orb);
+static struct sbp2_command_info *sbp2util_find_command_for_SCpnt(struct scsi_id_instance_data *scsi_id, void *SCpnt);
+static struct sbp2_command_info *sbp2util_allocate_command_orb(struct scsi_id_instance_data *scsi_id,
+							  struct scsi_cmnd *Current_SCpnt,
+							  void (*Current_done)(struct scsi_cmnd *));
+static void sbp2util_mark_command_completed(struct scsi_id_instance_data *scsi_id,
+		struct sbp2_command_info *command);
+
+
+static int sbp2_start_device(struct scsi_id_instance_data *scsi_id);
+static void sbp2_remove_device(struct scsi_id_instance_data *scsi_id);
+
+#ifdef CONFIG_IEEE1394_SBP2_PHYS_DMA
+static int sbp2_handle_physdma_write(struct hpsb_host *host, int nodeid, int destid, quadlet_t *data,
+                                     u64 addr, size_t length, u16 flags);
+static int sbp2_handle_physdma_read(struct hpsb_host *host, int nodeid, quadlet_t *data,
+                                    u64 addr, size_t length, u16 flags);
+#endif
+
+/*
+ * SBP-2 protocol related prototypes
+ */
+static int sbp2_query_logins(struct scsi_id_instance_data *scsi_id);
+static int sbp2_login_device(struct scsi_id_instance_data *scsi_id);
+static int sbp2_reconnect_device(struct scsi_id_instance_data *scsi_id);
+static int sbp2_logout_device(struct scsi_id_instance_data *scsi_id);
+static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid, int destid,
+				    quadlet_t *data, u64 addr, size_t length, u16 flags);
+static int sbp2_agent_reset(struct scsi_id_instance_data *scsi_id, int wait);
+static int sbp2_create_command_orb(struct scsi_id_instance_data *scsi_id,
+				   struct sbp2_command_info *command,
+				   unchar *scsi_cmd,
+				   unsigned int scsi_use_sg,
+				   unsigned int scsi_request_bufflen,
+				   void *scsi_request_buffer,
+				   enum dma_data_direction dma_dir);
+static int sbp2_link_orb_command(struct scsi_id_instance_data *scsi_id,
+				 struct sbp2_command_info *command);
+static int sbp2_send_command(struct scsi_id_instance_data *scsi_id,
+			     struct scsi_cmnd *SCpnt,
+			     void (*done)(struct scsi_cmnd *));
+static unsigned int sbp2_status_to_sense_data(unchar *sbp2_status, unchar *sense_data);
+static void sbp2_check_sbp2_command(struct scsi_id_instance_data *scsi_id, unchar *cmd);
+static void sbp2_check_sbp2_response(struct scsi_id_instance_data *scsi_id,
+				     struct scsi_cmnd *SCpnt);
+static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
+				      struct unit_directory *ud);
+static int sbp2_set_busy_timeout(struct scsi_id_instance_data *scsi_id);
+static int sbp2_max_speed_and_size(struct scsi_id_instance_data *scsi_id);
+
+#endif /* SBP2_H */