diff options
| author | Siddartha Mohanadoss <smohanad@codeaurora.org> | 2018-08-03 03:43:53 +0200 |
|---|---|---|
| committer | Jonathan Cameron <Jonathan.Cameron@huawei.com> | 2018-08-18 19:11:43 +0200 |
| commit | e13d757279bbc59776c8435fb94e54b5a58bdd0b (patch) | |
| tree | 82a059a180b0dae280fe34239114a15ee4f6be18 /drivers/iio/adc/Kconfig | |
| parent | dt-bindings: iio: adc: Add DT binding document for PMIC5 ADC (diff) | |
| download | linux-e13d757279bbc59776c8435fb94e54b5a58bdd0b.tar.xz linux-e13d757279bbc59776c8435fb94e54b5a58bdd0b.zip | |
iio: adc: Add QCOM SPMI PMIC5 ADC driver
This patch adds support for QCOM SPMI PMIC5 family
of ADC driver that supports hardware based offset and
gain compensation. The ADC peripheral can measure both
voltage and current channels whose input signal is
connected to the PMIC ADC AMUX.
The register set and configuration has been refreshed
compared to the prior QCOM PMIC ADC family. Register
ADC5 as part of the IIO framework.
Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Diffstat (limited to 'drivers/iio/adc/Kconfig')
| -rw-r--r-- | drivers/iio/adc/Kconfig | 20 |
1 files changed, 20 insertions, 0 deletions
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 4a754921fb6f..690fdb249565 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -596,6 +596,26 @@ config QCOM_SPMI_VADC To compile this driver as a module, choose M here: the module will be called qcom-spmi-vadc. +config QCOM_SPMI_ADC5 + tristate "Qualcomm Technologies Inc. SPMI PMIC5 ADC" + depends on SPMI + select REGMAP_SPMI + select QCOM_VADC_COMMON + help + This is the IIO Voltage PMIC5 ADC driver for Qualcomm Technologies Inc. + + The driver supports multiple channels read. The ADC is a 16-bit + sigma-delta ADC. The hardware supports calibrated results for + conversion requests and clients include reading voltage phone + power, on board system thermistors connected to the PMIC ADC, + PMIC die temperature, charger temperature, battery current, USB voltage + input, voltage signals connected to supported PMIC GPIO inputs. The + hardware supports internal pull-up for thermistors and can choose between + a 100k, 30k and 400k pull up using the ADC channels. + + To compile this driver as a module, choose M here: the module will + be called qcom-spmi-adc5. + config RCAR_GYRO_ADC tristate "Renesas R-Car GyroADC driver" depends on ARCH_RCAR_GEN2 || COMPILE_TEST |