iio: adc: at91: remove unused include from include/mach

That include file is now only used by the at91_adc driver, remove it from
include/mach for better driver separation.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

1 files changed, 102 insertions, 1 deletions

diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
index c0e4206e34e5..a51b8badbf8e 100644
--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@@ -31,7 +31,108 @@
 #include <linux/iio/trigger_consumer.h>
 #include <linux/iio/triggered_buffer.h>
 
-#include <mach/at91_adc.h>
+/* Registers */
+#define AT91_ADC_CR		0x00		/* Control Register */
+#define		AT91_ADC_SWRST		(1 << 0)	/* Software Reset */
+#define		AT91_ADC_START		(1 << 1)	/* Start Conversion */
+
+#define AT91_ADC_MR		0x04		/* Mode Register */
+#define		AT91_ADC_TSAMOD		(3 << 0)	/* ADC mode */
+#define		AT91_ADC_TSAMOD_ADC_ONLY_MODE		(0 << 0)	/* ADC Mode */
+#define		AT91_ADC_TSAMOD_TS_ONLY_MODE		(1 << 0)	/* Touch Screen Only Mode */
+#define		AT91_ADC_TRGEN		(1 << 0)	/* Trigger Enable */
+#define		AT91_ADC_TRGSEL		(7 << 1)	/* Trigger Selection */
+#define			AT91_ADC_TRGSEL_TC0		(0 << 1)
+#define			AT91_ADC_TRGSEL_TC1		(1 << 1)
+#define			AT91_ADC_TRGSEL_TC2		(2 << 1)
+#define			AT91_ADC_TRGSEL_EXTERNAL	(6 << 1)
+#define		AT91_ADC_LOWRES		(1 << 4)	/* Low Resolution */
+#define		AT91_ADC_SLEEP		(1 << 5)	/* Sleep Mode */
+#define		AT91_ADC_PENDET		(1 << 6)	/* Pen contact detection enable */
+#define		AT91_ADC_PRESCAL_9260	(0x3f << 8)	/* Prescalar Rate Selection */
+#define		AT91_ADC_PRESCAL_9G45	(0xff << 8)
+#define			AT91_ADC_PRESCAL_(x)	((x) << 8)
+#define		AT91_ADC_STARTUP_9260	(0x1f << 16)	/* Startup Up Time */
+#define		AT91_ADC_STARTUP_9G45	(0x7f << 16)
+#define		AT91_ADC_STARTUP_9X5	(0xf << 16)
+#define			AT91_ADC_STARTUP_(x)	((x) << 16)
+#define		AT91_ADC_SHTIM		(0xf  << 24)	/* Sample & Hold Time */
+#define			AT91_ADC_SHTIM_(x)	((x) << 24)
+#define		AT91_ADC_PENDBC		(0x0f << 28)	/* Pen Debounce time */
+#define			AT91_ADC_PENDBC_(x)	((x) << 28)
+
+#define AT91_ADC_TSR		0x0C
+#define		AT91_ADC_TSR_SHTIM	(0xf  << 24)	/* Sample & Hold Time */
+#define			AT91_ADC_TSR_SHTIM_(x)	((x) << 24)
+
+#define AT91_ADC_CHER		0x10		/* Channel Enable Register */
+#define AT91_ADC_CHDR		0x14		/* Channel Disable Register */
+#define AT91_ADC_CHSR		0x18		/* Channel Status Register */
+#define		AT91_ADC_CH(n)		(1 << (n))	/* Channel Number */
+
+#define AT91_ADC_SR		0x1C		/* Status Register */
+#define		AT91_ADC_EOC(n)		(1 << (n))	/* End of Conversion on Channel N */
+#define		AT91_ADC_OVRE(n)	(1 << ((n) + 8))/* Overrun Error on Channel N */
+#define		AT91_ADC_DRDY		(1 << 16)	/* Data Ready */
+#define		AT91_ADC_GOVRE		(1 << 17)	/* General Overrun Error */
+#define		AT91_ADC_ENDRX		(1 << 18)	/* End of RX Buffer */
+#define		AT91_ADC_RXFUFF		(1 << 19)	/* RX Buffer Full */
+
+#define AT91_ADC_SR_9X5		0x30		/* Status Register for 9x5 */
+#define		AT91_ADC_SR_DRDY_9X5	(1 << 24)	/* Data Ready */
+
+#define AT91_ADC_LCDR		0x20		/* Last Converted Data Register */
+#define		AT91_ADC_LDATA		(0x3ff)
+
+#define AT91_ADC_IER		0x24		/* Interrupt Enable Register */
+#define AT91_ADC_IDR		0x28		/* Interrupt Disable Register */
+#define AT91_ADC_IMR		0x2C		/* Interrupt Mask Register */
+#define		AT91RL_ADC_IER_PEN	(1 << 20)
+#define		AT91RL_ADC_IER_NOPEN	(1 << 21)
+#define		AT91_ADC_IER_PEN	(1 << 29)
+#define		AT91_ADC_IER_NOPEN	(1 << 30)
+#define		AT91_ADC_IER_XRDY	(1 << 20)
+#define		AT91_ADC_IER_YRDY	(1 << 21)
+#define		AT91_ADC_IER_PRDY	(1 << 22)
+#define		AT91_ADC_ISR_PENS	(1 << 31)
+
+#define AT91_ADC_CHR(n)		(0x30 + ((n) * 4))	/* Channel Data Register N */
+#define		AT91_ADC_DATA		(0x3ff)
+
+#define AT91_ADC_CDR0_9X5	(0x50)			/* Channel Data Register 0 for 9X5 */
+
+#define AT91_ADC_ACR		0x94	/* Analog Control Register */
+#define		AT91_ADC_ACR_PENDETSENS	(0x3 << 0)	/* pull-up resistor */
+
+#define AT91_ADC_TSMR		0xB0
+#define		AT91_ADC_TSMR_TSMODE	(3 << 0)	/* Touch Screen Mode */
+#define			AT91_ADC_TSMR_TSMODE_NONE		(0 << 0)
+#define			AT91_ADC_TSMR_TSMODE_4WIRE_NO_PRESS	(1 << 0)
+#define			AT91_ADC_TSMR_TSMODE_4WIRE_PRESS	(2 << 0)
+#define			AT91_ADC_TSMR_TSMODE_5WIRE		(3 << 0)
+#define		AT91_ADC_TSMR_TSAV	(3 << 4)	/* Averages samples */
+#define			AT91_ADC_TSMR_TSAV_(x)		((x) << 4)
+#define		AT91_ADC_TSMR_SCTIM	(0x0f << 16)	/* Switch closure time */
+#define		AT91_ADC_TSMR_PENDBC	(0x0f << 28)	/* Pen Debounce time */
+#define			AT91_ADC_TSMR_PENDBC_(x)	((x) << 28)
+#define		AT91_ADC_TSMR_NOTSDMA	(1 << 22)	/* No Touchscreen DMA */
+#define		AT91_ADC_TSMR_PENDET_DIS	(0 << 24)	/* Pen contact detection disable */
+#define		AT91_ADC_TSMR_PENDET_ENA	(1 << 24)	/* Pen contact detection enable */
+
+#define AT91_ADC_TSXPOSR	0xB4
+#define AT91_ADC_TSYPOSR	0xB8
+#define AT91_ADC_TSPRESSR	0xBC
+
+#define AT91_ADC_TRGR_9260	AT91_ADC_MR
+#define AT91_ADC_TRGR_9G45	0x08
+#define AT91_ADC_TRGR_9X5	0xC0
+
+/* Trigger Register bit field */
+#define		AT91_ADC_TRGR_TRGPER	(0xffff << 16)
+#define			AT91_ADC_TRGR_TRGPER_(x)	((x) << 16)
+#define		AT91_ADC_TRGR_TRGMOD	(0x7 << 0)
+#define			AT91_ADC_TRGR_NONE		(0 << 0)
+#define			AT91_ADC_TRGR_MOD_PERIOD_TRIG	(5 << 0)
 
 #define AT91_ADC_CHAN(st, ch) \
 	(st->registers->channel_base + (ch * 4))