diff options
author | Siddartha Mohanadoss <smohanad@codeaurora.org> | 2018-08-03 03:43:53 +0200 |
---|---|---|
committer | Jonathan Cameron <Jonathan.Cameron@huawei.com> | 2018-08-18 19:11:43 +0200 |
commit | e13d757279bbc59776c8435fb94e54b5a58bdd0b (patch) | |
tree | 82a059a180b0dae280fe34239114a15ee4f6be18 /drivers/iio/adc/qcom-vadc-common.h | |
parent | dt-bindings: iio: adc: Add DT binding document for PMIC5 ADC (diff) | |
download | linux-e13d757279bbc59776c8435fb94e54b5a58bdd0b.tar.xz linux-e13d757279bbc59776c8435fb94e54b5a58bdd0b.zip |
iio: adc: Add QCOM SPMI PMIC5 ADC driver
This patch adds support for QCOM SPMI PMIC5 family
of ADC driver that supports hardware based offset and
gain compensation. The ADC peripheral can measure both
voltage and current channels whose input signal is
connected to the PMIC ADC AMUX.
The register set and configuration has been refreshed
compared to the prior QCOM PMIC ADC family. Register
ADC5 as part of the IIO framework.
Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Diffstat (limited to 'drivers/iio/adc/qcom-vadc-common.h')
-rw-r--r-- | drivers/iio/adc/qcom-vadc-common.h | 54 |
1 files changed, 54 insertions, 0 deletions
diff --git a/drivers/iio/adc/qcom-vadc-common.h b/drivers/iio/adc/qcom-vadc-common.h index 1d5354ff5c72..bbb1fa02b382 100644 --- a/drivers/iio/adc/qcom-vadc-common.h +++ b/drivers/iio/adc/qcom-vadc-common.h @@ -25,15 +25,31 @@ #define VADC_DECIMATION_MIN 512 #define VADC_DECIMATION_MAX 4096 +#define ADC5_DEF_VBAT_PRESCALING 1 /* 1:3 */ +#define ADC5_DECIMATION_SHORT 250 +#define ADC5_DECIMATION_MEDIUM 420 +#define ADC5_DECIMATION_LONG 840 +/* Default decimation - 1024 for rev2, 840 for pmic5 */ +#define ADC5_DECIMATION_DEFAULT 2 +#define ADC5_DECIMATION_SAMPLES_MAX 3 #define VADC_HW_SETTLE_DELAY_MAX 10000 +#define VADC_HW_SETTLE_SAMPLES_MAX 16 #define VADC_AVG_SAMPLES_MAX 512 +#define ADC5_AVG_SAMPLES_MAX 16 #define KELVINMIL_CELSIUSMIL 273150 +#define PMIC5_CHG_TEMP_SCALE_FACTOR 377500 +#define PMIC5_SMB_TEMP_CONSTANT 419400 +#define PMIC5_SMB_TEMP_SCALE_FACTOR 356 #define PMI_CHG_SCALE_1 -138890 #define PMI_CHG_SCALE_2 391750000000LL +#define VADC5_MAX_CODE 0x7fff +#define ADC5_FULL_SCALE_CODE 0x70e4 +#define ADC5_USR_DATA_CHECK 0x8000 + /** * struct vadc_map_pt - Map the graph representation for ADC channel * @x: Represent the ADC digitized code. @@ -89,6 +105,18 @@ struct vadc_prescale_ratio { * SCALE_PMIC_THERM: Returns result in milli degree's Centigrade. * SCALE_XOTHERM: Returns XO thermistor voltage in millidegC. * SCALE_PMI_CHG_TEMP: Conversion for PMI CHG temp + * SCALE_HW_CALIB_DEFAULT: Default scaling to convert raw adc code to + * voltage (uV) with hardware applied offset/slope values to adc code. + * SCALE_HW_CALIB_THERM_100K_PULLUP: Returns temperature in millidegC using + * lookup table. The hardware applies offset/slope to adc code. + * SCALE_HW_CALIB_XOTHERM: Returns XO thermistor voltage in millidegC using + * 100k pullup. The hardware applies offset/slope to adc code. + * SCALE_HW_CALIB_PMIC_THERM: Returns result in milli degree's Centigrade. + * The hardware applies offset/slope to adc code. + * SCALE_HW_CALIB_PM5_CHG_TEMP: Returns result in millidegrees for PMIC5 + * charger temperature. + * SCALE_HW_CALIB_PM5_SMB_TEMP: Returns result in millidegrees for PMIC5 + * SMB1390 temperature. */ enum vadc_scale_fn_type { SCALE_DEFAULT = 0, @@ -96,6 +124,22 @@ enum vadc_scale_fn_type { SCALE_PMIC_THERM, SCALE_XOTHERM, SCALE_PMI_CHG_TEMP, + SCALE_HW_CALIB_DEFAULT, + SCALE_HW_CALIB_THERM_100K_PULLUP, + SCALE_HW_CALIB_XOTHERM, + SCALE_HW_CALIB_PMIC_THERM, + SCALE_HW_CALIB_PM5_CHG_TEMP, + SCALE_HW_CALIB_PM5_SMB_TEMP, + SCALE_HW_CALIB_INVALID, +}; + +struct adc5_data { + const u32 full_scale_code_volt; + const u32 full_scale_code_cur; + const struct adc5_channels *adc_chans; + unsigned int *decimation; + unsigned int *hw_settle_1; + unsigned int *hw_settle_2; }; int qcom_vadc_scale(enum vadc_scale_fn_type scaletype, @@ -104,6 +148,16 @@ int qcom_vadc_scale(enum vadc_scale_fn_type scaletype, bool absolute, u16 adc_code, int *result_mdec); +struct qcom_adc5_scale_type { + int (*scale_fn)(const struct vadc_prescale_ratio *prescale, + const struct adc5_data *data, u16 adc_code, int *result); +}; + +int qcom_adc5_hw_scale(enum vadc_scale_fn_type scaletype, + const struct vadc_prescale_ratio *prescale, + const struct adc5_data *data, + u16 adc_code, int *result_mdec); + int qcom_vadc_decimation_from_dt(u32 value); #endif /* QCOM_VADC_COMMON_H */ |