diff options
| author | Stefan Popa <stefan.popa@analog.com> | 2018-12-06 14:38:30 +0100 |
|---|---|---|
| committer | Jonathan Cameron <Jonathan.Cameron@huawei.com> | 2018-12-08 16:35:55 +0100 |
| commit | 12d323cf6dd558b442fa3f03af3c7703617eed81 (patch) | |
| tree | f0d7be619f46dd0883985c10bd256afaa54d1de7 /drivers/iio/dac/ad5686-spi.c | |
| parent | Revert "Staging: iio: adt7316: Add an extra check for 'ret' equals to 0" (diff) | |
| download | linux-12d323cf6dd558b442fa3f03af3c7703617eed81.tar.xz linux-12d323cf6dd558b442fa3f03af3c7703617eed81.zip | |
iio:dac:ad5686: Add AD5310R support
The AD5310R is a single channel DAC with 10-bit precision, which is
part of the same family as AD5311R, except that it uses the spi interface
instead of i2c. The device has a built-in 2.5V reference which is enabled
by default.
Another important difference is that the SPI write command operation is
16 bits long. The first four bits represent the command, while the
remaining 12 bits are for data. In the control reg, DB9 and DB10 are used
for power-down modes, while DB8 is the REF bit. In order to accommodate
this change, a new regmap type was defined and checked accordingly.
Because AD5310R does not have a readback register, the read_raw operation
will return "Operation is not supported".
Datasheet:
Link: http://www.analog.com/media/en/technical-documentation/data-sheets/AD5310R_5311R.pdf
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Diffstat (limited to 'drivers/iio/dac/ad5686-spi.c')
| -rw-r--r-- | drivers/iio/dac/ad5686-spi.c | 21 |
1 files changed, 18 insertions, 3 deletions
diff --git a/drivers/iio/dac/ad5686-spi.c b/drivers/iio/dac/ad5686-spi.c index 1df9143f55e9..665fa6bd9ced 100644 --- a/drivers/iio/dac/ad5686-spi.c +++ b/drivers/iio/dac/ad5686-spi.c @@ -19,6 +19,12 @@ static int ad5686_spi_write(struct ad5686_state *st, u8 tx_len, *buf; switch (st->chip_info->regmap_type) { + case AD5310_REGMAP: + st->data[0].d16 = cpu_to_be16(AD5310_CMD(cmd) | + val); + buf = &st->data[0].d8[0]; + tx_len = 2; + break; case AD5683_REGMAP: st->data[0].d32 = cpu_to_be32(AD5686_CMD(cmd) | AD5683_DATA(val)); @@ -56,10 +62,18 @@ static int ad5686_spi_read(struct ad5686_state *st, u8 addr) u8 cmd = 0; int ret; - if (st->chip_info->regmap_type == AD5686_REGMAP) - cmd = AD5686_CMD_READBACK_ENABLE; - else if (st->chip_info->regmap_type == AD5683_REGMAP) + switch (st->chip_info->regmap_type) { + case AD5310_REGMAP: + return -ENOTSUPP; + case AD5683_REGMAP: cmd = AD5686_CMD_READBACK_ENABLE_V2; + break; + case AD5686_REGMAP: + cmd = AD5686_CMD_READBACK_ENABLE; + break; + default: + return -EINVAL; + } st->data[0].d32 = cpu_to_be32(AD5686_CMD(cmd) | AD5686_ADDR(addr)); @@ -86,6 +100,7 @@ static int ad5686_spi_remove(struct spi_device *spi) } static const struct spi_device_id ad5686_spi_id[] = { + {"ad5310r", ID_AD5310R}, {"ad5672r", ID_AD5672R}, {"ad5676", ID_AD5676}, {"ad5676r", ID_AD5676R}, |