iio: imu: Add initial support for Bosch BMI160

BMI160 is an Inertial Measurement Unit (IMU) which provides acceleration
and angular rate measurement. It also offers a secondary I2C interface
for connecting a magnetometer sensor (usually BMM160).

Current driver offers support for accelerometer and gyroscope readings
via sysfs or via buffer interface using an external trigger (e.g.
hrtimer). Data is retrieved from IMU via I2C or SPI interface.

Datasheet is at:
	http://www.mouser.com/ds/2/783/BST-BMI160-DS000-07-786474.pdf

Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

1 files changed, 32 insertions, 0 deletions

diff --git a/drivers/iio/imu/bmi160/Kconfig b/drivers/iio/imu/bmi160/Kconfig
new file mode 100644
index 000000000000..005c17ccc2b0
--- /dev/null
+++ b/drivers/iio/imu/bmi160/Kconfig
@@ -0,0 +1,32 @@
+#
+# BMI160 IMU driver
+#
+
+config BMI160
+	tristate
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+
+config BMI160_I2C
+	tristate "Bosch BMI160 I2C driver"
+	depends on I2C
+	select BMI160
+	select REGMAP_I2C
+	help
+	  If you say yes here you get support for BMI160 IMU on I2C with
+	  accelerometer, gyroscope and external BMG160 magnetometer.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called bmi160_i2c.
+
+config BMI160_SPI
+	tristate "Bosch BMI160 SPI driver"
+	depends on SPI
+	select BMI160
+	select REGMAP_SPI
+	help
+	  If you say yes here you get support for BMI160 IMU on SPI with
+	  accelerometer, gyroscope and external BMG160 magnetometer.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called bmi160_spi.