Merge tag 'iio-fixes-for-4.2b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

Second set of IIO fixes for the 4.2 cycle. Note these depend (mostly) on
material in the recent merge window, hence their separation from set (a)
as the fixes-togreg branch predated the merge window.  I am running rather
later with these than I would have liked hence the large set.

* stk3310 fixes from Hartmut's review that came in post merge
  - fix direction of proximity inline with recent documentation
    clarification.
  - fix missing REGMAP_I2C dependency
  - rework the error handling for raw readings to fix an failure to power
    down in the event of a raw reading failing.
  - fix a bug in the compensation code which was toggling an extra bit in the
    register.
* mmc35240 - reported samplign frequencies were wrong.
* ltr501 fixes
  - fix a case of returning the return value of a regmap_read instead of
    the value read.
  - fix missing regmap dependency
* sx9500 - fix missing default values for ret in a couple of places to handle
  the case of no enabled channels.
* tmp006 - check that writes to info_mask elements are actually to writable
  ones.  Otherwise, writing to any of them will change the sampling frequency.

3 files changed, 20 insertions, 37 deletions

diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index e6198b7c9cbf..a5c59251ec0e 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -188,6 +188,7 @@ config SENSORS_LM3533
 config LTR501
 	tristate "LTR-501ALS-01 light sensor"
 	depends on I2C
+	select REGMAP_I2C
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
@@ -201,6 +202,7 @@ config LTR501
 config STK3310
 	tristate "STK3310 ALS and proximity sensor"
 	depends on I2C
+	select REGMAP_I2C
 	help
 	 Say yes here to get support for the Sensortek STK3310 ambient light
 	 and proximity sensor. The STK3311 model is also supported by this
diff --git a/drivers/iio/light/ltr501.c b/drivers/iio/light/ltr501.c
index 1ef7d3773ab9..b5a0e66b5f28 100644
--- a/drivers/iio/light/ltr501.c
+++ b/drivers/iio/light/ltr501.c
@@ -1302,7 +1302,7 @@ static int ltr501_init(struct ltr501_data *data)
 	if (ret < 0)
 		return ret;
 
-	data->als_contr = ret | data->chip_info->als_mode_active;
+	data->als_contr = status | data->chip_info->als_mode_active;
 
 	ret = regmap_read(data->regmap, LTR501_PS_CONTR, &status);
 	if (ret < 0)
diff --git a/drivers/iio/light/stk3310.c b/drivers/iio/light/stk3310.c
index fee4297d7c8f..c1a218236be5 100644
--- a/drivers/iio/light/stk3310.c
+++ b/drivers/iio/light/stk3310.c
@@ -43,7 +43,6 @@
 #define STK3311_CHIP_ID_VAL			0x1D
 #define STK3310_PSINT_EN			0x01
 #define STK3310_PS_MAX_VAL			0xFFFF
-#define STK3310_THRESH_MAX			0xFFFF
 
 #define STK3310_DRIVER_NAME			"stk3310"
 #define STK3310_REGMAP_NAME			"stk3310_regmap"
@@ -84,15 +83,13 @@ static const struct reg_field stk3310_reg_field_flag_psint =
 				REG_FIELD(STK3310_REG_FLAG, 4, 4);
 static const struct reg_field stk3310_reg_field_flag_nf =
 				REG_FIELD(STK3310_REG_FLAG, 0, 0);
-/*
- * Maximum PS values with regard to scale. Used to export the 'inverse'
- * PS value (high values for far objects, low values for near objects).
- */
+
+/* Estimate maximum proximity values with regard to measurement scale. */
 static const int stk3310_ps_max[4] = {
-	STK3310_PS_MAX_VAL / 64,
-	STK3310_PS_MAX_VAL / 16,
-	STK3310_PS_MAX_VAL /  4,
-	STK3310_PS_MAX_VAL,
+	STK3310_PS_MAX_VAL / 640,
+	STK3310_PS_MAX_VAL / 160,
+	STK3310_PS_MAX_VAL /  40,
+	STK3310_PS_MAX_VAL /  10
 };
 
 static const int stk3310_scale_table[][2] = {
@@ -128,14 +125,14 @@ static const struct iio_event_spec stk3310_events[] = {
 	/* Proximity event */
 	{
 		.type = IIO_EV_TYPE_THRESH,
-		.dir = IIO_EV_DIR_FALLING,
+		.dir = IIO_EV_DIR_RISING,
 		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
 				 BIT(IIO_EV_INFO_ENABLE),
 	},
 	/* Out-of-proximity event */
 	{
 		.type = IIO_EV_TYPE_THRESH,
-		.dir = IIO_EV_DIR_RISING,
+		.dir = IIO_EV_DIR_FALLING,
 		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
 				 BIT(IIO_EV_INFO_ENABLE),
 	},
@@ -205,23 +202,16 @@ static int stk3310_read_event(struct iio_dev *indio_dev,
 	u8 reg;
 	u16 buf;
 	int ret;
-	unsigned int index;
 	struct stk3310_data *data = iio_priv(indio_dev);
 
 	if (info != IIO_EV_INFO_VALUE)
 		return -EINVAL;
 
-	/*
-	 * Only proximity interrupts are implemented at the moment.
-	 * Since we're inverting proximity values, the sensor's 'high'
-	 * threshold will become our 'low' threshold, associated with
-	 * 'near' events. Similarly, the sensor's 'low' threshold will
-	 * be our 'high' threshold, associated with 'far' events.
-	 */
+	/* Only proximity interrupts are implemented at the moment. */
 	if (dir == IIO_EV_DIR_RISING)
-		reg = STK3310_REG_THDL_PS;
-	else if (dir == IIO_EV_DIR_FALLING)
 		reg = STK3310_REG_THDH_PS;
+	else if (dir == IIO_EV_DIR_FALLING)
+		reg = STK3310_REG_THDL_PS;
 	else
 		return -EINVAL;
 
@@ -232,8 +222,7 @@ static int stk3310_read_event(struct iio_dev *indio_dev,
 		dev_err(&data->client->dev, "register read failed\n");
 		return ret;
 	}
-	regmap_field_read(data->reg_ps_gain, &index);
-	*val = swab16(stk3310_ps_max[index] - buf);
+	*val = swab16(buf);
 
 	return IIO_VAL_INT;
 }
@@ -257,13 +246,13 @@ static int stk3310_write_event(struct iio_dev *indio_dev,
 		return -EINVAL;
 
 	if (dir == IIO_EV_DIR_RISING)
-		reg = STK3310_REG_THDL_PS;
-	else if (dir == IIO_EV_DIR_FALLING)
 		reg = STK3310_REG_THDH_PS;
+	else if (dir == IIO_EV_DIR_FALLING)
+		reg = STK3310_REG_THDL_PS;
 	else
 		return -EINVAL;
 
-	buf = swab16(stk3310_ps_max[index] - val);
+	buf = swab16(val);
 	ret = regmap_bulk_write(data->regmap, reg, &buf, 2);
 	if (ret < 0)
 		dev_err(&client->dev, "failed to set PS threshold!\n");
@@ -334,14 +323,6 @@ static int stk3310_read_raw(struct iio_dev *indio_dev,
 			return ret;
 		}
 		*val = swab16(buf);
-		if (chan->type == IIO_PROXIMITY) {
-			/*
-			 * Invert the proximity data so we return low values
-			 * for close objects and high values for far ones.
-			 */
-			regmap_field_read(data->reg_ps_gain, &index);
-			*val = stk3310_ps_max[index] - *val;
-		}
 		mutex_unlock(&data->lock);
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_INT_TIME:
@@ -581,8 +562,8 @@ static irqreturn_t stk3310_irq_event_handler(int irq, void *private)
 	}
 	event = IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, 1,
 				     IIO_EV_TYPE_THRESH,
-				     (dir ? IIO_EV_DIR_RISING :
-					    IIO_EV_DIR_FALLING));
+				     (dir ? IIO_EV_DIR_FALLING :
+					    IIO_EV_DIR_RISING));
 	iio_push_event(indio_dev, event, data->timestamp);
 
 	/* Reset the interrupt flag */