iio: adc: xilinx-xadc: Don't clobber preset voltage/temperature thresholds

In the probe function, the driver was reading out the thresholds already
set in the core, which can be configured by the user in the Vivado tools
when the FPGA image is built. However, it later clobbered those values
with zero or maximum values. In particular, the overtemperature shutdown
threshold register was overwritten with the max value, which effectively
prevents the FPGA from shutting down when the desired threshold was
eached, potentially risking hardware damage in that case.

Remove this code to leave the preconfigured default threshold values
intact.

The code was also disabling all alarms regardless of what enable state
they were left in by the FPGA image, including the overtemperature
shutdown feature. Leave these bits in their original state so they are
not unconditionally disabled.

Fixes: bdc8cda1d010 ("iio:adc: Add Xilinx XADC driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Acked-by: O'Griofa, Conall <conall.ogriofa@amd.com>
Tested-by: O'Griofa, Conall <conall.ogriofa@amd.com>
Link: https://lore.kernel.org/r/20230915001019.2862964-2-robert.hancock@calian.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

1 files changed, 0 insertions, 22 deletions

diff --git a/drivers/iio/adc/xilinx-xadc-core.c b/drivers/iio/adc/xilinx-xadc-core.c
index dba73300f894..d4d0d184a172 100644
--- a/drivers/iio/adc/xilinx-xadc-core.c
+++ b/drivers/iio/adc/xilinx-xadc-core.c
@@ -1423,28 +1423,6 @@ static int xadc_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	/* Disable all alarms */
-	ret = xadc_update_adc_reg(xadc, XADC_REG_CONF1, XADC_CONF1_ALARM_MASK,
-				  XADC_CONF1_ALARM_MASK);
-	if (ret)
-		return ret;
-
-	/* Set thresholds to min/max */
-	for (i = 0; i < 16; i++) {
-		/*
-		 * Set max voltage threshold and both temperature thresholds to
-		 * 0xffff, min voltage threshold to 0.
-		 */
-		if (i % 8 < 4 || i == 7)
-			xadc->threshold[i] = 0xffff;
-		else
-			xadc->threshold[i] = 0;
-		ret = xadc_write_adc_reg(xadc, XADC_REG_THRESHOLD(i),
-			xadc->threshold[i]);
-		if (ret)
-			return ret;
-	}
-
 	/* Go to non-buffered mode */
 	xadc_postdisable(indio_dev);