Merge tag 'iio-for-4.10b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-testing

Jonathan writes:

Second round of new device support, cleanups and fixes for IIO in the 4.10 cycle

This includes two branch merges for elements that may also go via MFD.

New device support
* cros_ec
  - new driver to support these Chrome OS contiguous sensors which are behind
    the Chrome OS embedded controller.  Requires a few minor MFD and chrome
    platform changes.  One follow up fix deals with some dependency issues in
    Kconfig.
* mpu-3050
  - new driver and device tree bindings for this venerable device.
* st_accel
  - support for the lng2dm an

Driver features
* ad7192
  - Add DVdd regulator handling
* ad9832
  - Add DVDD regulator handling
* at91
  - Suspend and resume support
* si7020
  - Device tree bindings
* ti-am335x
  - DMA support - uses dma to accelerate short bursts of read back rather
  than full blown DMA buffer support.  Greatly improved performance.
  Includes an MFD addition to give access to the address needed for DMA.
* tsl2583
  - Device tree bindings

Cleanups and minor fixes
* ad7192
  - Fix regulator naming to match datasheet
  - Handle regulator errors correctly (so as to not break deferred probing)
  - Rename reg variable to reflect which regulator it is
* ad5933
  - Fix regulator naming to match datasheet
  - Handle regulator errors correctly (so as to not break deferred probing)
* ad7746
  - Fix a missing return value (fallout from previous patch set)
* ad7780
  - Fix regulator naming to match datasheet
  - Handle regulator errors correctly (so as to not break deferred probing)
* ad9832
  - Fix regulator naming to match datasheet
  - Handle regulator errors correctly (so as to not break deferred probing)
  - Rename reg regulator to reflect which one it is
* ad9834
  - Fix regulator naming to match datasheet
  - Handle regulator errors correctly (so as to not break deferred probing)
* hts221
  - Remove a duplicated include
* maxim thermocouple
  - Handle a wrong storage side in read function.  Prevent any problems that
  might be introduced by additions to this driver in future.
* tsl2583 - big set from Brian Masney to drive this towards a staging
  graduation.
  - Convert to iio_chan_spec and read_raw / write_raw (in a couple of steps)
  - Improved error handling in various functions
  - Drop redundant power_state custom sysfs attribute.
  - Use IIO_*_ATTR* macros for remaining attributes.
  - Return an error code to userspace on invalid parameters being writen to
    sysfs files.
  - Add locking to various attribute accesses to remove possible races.
  - Add defines for various magic numbers.
  - Use smbus_read_byte_data instead of a write_byte followed by read_byte.
  - Query only relevant registers in probe.
  - Tidy up ordering of code comments.
  - Remove a pointless power off sequence in taos_chip_on.
  - Don't bother shutting down the chip when updating the lux table.
  The table is held entirely in the driver and doesn't effect the chip at all.
  - Drop a redundant i2c call in taos_als_calibrate where the same register
  is read twice in a row.

23 files changed, 2797 insertions, 7 deletions

diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index c6cc2c0909a1..c68bdb649005 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -127,7 +127,8 @@ config IIO_ST_ACCEL_3AXIS
 	help
 	  Say yes here to build support for STMicroelectronics accelerometers:
 	  LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
-	  LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12, H3LIS331DL.
+	  LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12, H3LIS331DL,
+	  LNG2DM
 
 	  This driver can also be built as a module. If so, these modules
 	  will be created:
diff --git a/drivers/iio/accel/st_accel.h b/drivers/iio/accel/st_accel.h
index f8dfdb690563..7c231687109a 100644
--- a/drivers/iio/accel/st_accel.h
+++ b/drivers/iio/accel/st_accel.h
@@ -30,6 +30,7 @@
 #define LSM303AGR_ACCEL_DEV_NAME	"lsm303agr_accel"
 #define LIS2DH12_ACCEL_DEV_NAME		"lis2dh12_accel"
 #define LIS3L02DQ_ACCEL_DEV_NAME	"lis3l02dq"
+#define LNG2DM_ACCEL_DEV_NAME		"lng2dm"
 
 /**
 * struct st_sensors_platform_data - default accel platform data
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index da3fb069ec5c..b242457d0c80 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -231,6 +231,12 @@
 #define ST_ACCEL_7_DRDY_IRQ_INT1_MASK		0x04
 #define ST_ACCEL_7_MULTIREAD_BIT		false
 
+/* CUSTOM VALUES FOR SENSOR 8 */
+#define ST_ACCEL_8_FS_AVL_2_GAIN		IIO_G_TO_M_S_2(15600)
+#define ST_ACCEL_8_FS_AVL_4_GAIN		IIO_G_TO_M_S_2(31200)
+#define ST_ACCEL_8_FS_AVL_8_GAIN		IIO_G_TO_M_S_2(62500)
+#define ST_ACCEL_8_FS_AVL_16_GAIN		IIO_G_TO_M_S_2(187500)
+
 static const struct iio_chan_spec st_accel_8bit_channels[] = {
 	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
 			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
@@ -726,6 +732,73 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 		.multi_read_bit = ST_ACCEL_7_MULTIREAD_BIT,
 		.bootime = 2,
 	},
+	{
+		.wai = ST_ACCEL_1_WAI_EXP,
+		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
+		.sensors_supported = {
+			[0] = LNG2DM_ACCEL_DEV_NAME,
+		},
+		.ch = (struct iio_chan_spec *)st_accel_8bit_channels,
+		.odr = {
+			.addr = ST_ACCEL_1_ODR_ADDR,
+			.mask = ST_ACCEL_1_ODR_MASK,
+			.odr_avl = {
+				{ 1, ST_ACCEL_1_ODR_AVL_1HZ_VAL, },
+				{ 10, ST_ACCEL_1_ODR_AVL_10HZ_VAL, },
+				{ 25, ST_ACCEL_1_ODR_AVL_25HZ_VAL, },
+				{ 50, ST_ACCEL_1_ODR_AVL_50HZ_VAL, },
+				{ 100, ST_ACCEL_1_ODR_AVL_100HZ_VAL, },
+				{ 200, ST_ACCEL_1_ODR_AVL_200HZ_VAL, },
+				{ 400, ST_ACCEL_1_ODR_AVL_400HZ_VAL, },
+				{ 1600, ST_ACCEL_1_ODR_AVL_1600HZ_VAL, },
+			},
+		},
+		.pw = {
+			.addr = ST_ACCEL_1_ODR_ADDR,
+			.mask = ST_ACCEL_1_ODR_MASK,
+			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+		},
+		.enable_axis = {
+			.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+		},
+		.fs = {
+			.addr = ST_ACCEL_1_FS_ADDR,
+			.mask = ST_ACCEL_1_FS_MASK,
+			.fs_avl = {
+				[0] = {
+					.num = ST_ACCEL_FS_AVL_2G,
+					.value = ST_ACCEL_1_FS_AVL_2_VAL,
+					.gain = ST_ACCEL_8_FS_AVL_2_GAIN,
+				},
+				[1] = {
+					.num = ST_ACCEL_FS_AVL_4G,
+					.value = ST_ACCEL_1_FS_AVL_4_VAL,
+					.gain = ST_ACCEL_8_FS_AVL_4_GAIN,
+				},
+				[2] = {
+					.num = ST_ACCEL_FS_AVL_8G,
+					.value = ST_ACCEL_1_FS_AVL_8_VAL,
+					.gain = ST_ACCEL_8_FS_AVL_8_GAIN,
+				},
+				[3] = {
+					.num = ST_ACCEL_FS_AVL_16G,
+					.value = ST_ACCEL_1_FS_AVL_16_VAL,
+					.gain = ST_ACCEL_8_FS_AVL_16_GAIN,
+				},
+			},
+		},
+		.drdy_irq = {
+			.addr = ST_ACCEL_1_DRDY_IRQ_ADDR,
+			.mask_int1 = ST_ACCEL_1_DRDY_IRQ_INT1_MASK,
+			.mask_int2 = ST_ACCEL_1_DRDY_IRQ_INT2_MASK,
+			.addr_ihl = ST_ACCEL_1_IHL_IRQ_ADDR,
+			.mask_ihl = ST_ACCEL_1_IHL_IRQ_MASK,
+			.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
+		},
+		.multi_read_bit = ST_ACCEL_1_MULTIREAD_BIT,
+		.bootime = 2,
+	},
 };
 
 static int st_accel_read_raw(struct iio_dev *indio_dev,
diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c
index e9d427a5df7c..c0f8867aa1ea 100644
--- a/drivers/iio/accel/st_accel_i2c.c
+++ b/drivers/iio/accel/st_accel_i2c.c
@@ -84,6 +84,10 @@ static const struct of_device_id st_accel_of_match[] = {
 		.compatible = "st,lis3l02dq",
 		.data = LIS3L02DQ_ACCEL_DEV_NAME,
 	},
+	{
+		.compatible = "st,lng2dm-accel",
+		.data = LNG2DM_ACCEL_DEV_NAME,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, st_accel_of_match);
@@ -135,6 +139,7 @@ static const struct i2c_device_id st_accel_id_table[] = {
 	{ LSM303AGR_ACCEL_DEV_NAME },
 	{ LIS2DH12_ACCEL_DEV_NAME },
 	{ LIS3L02DQ_ACCEL_DEV_NAME },
+	{ LNG2DM_ACCEL_DEV_NAME },
 	{},
 };
 MODULE_DEVICE_TABLE(i2c, st_accel_id_table);
diff --git a/drivers/iio/accel/st_accel_spi.c b/drivers/iio/accel/st_accel_spi.c
index efd43941d45d..c25ac50d4600 100644
--- a/drivers/iio/accel/st_accel_spi.c
+++ b/drivers/iio/accel/st_accel_spi.c
@@ -60,6 +60,7 @@ static const struct spi_device_id st_accel_id_table[] = {
 	{ LSM303AGR_ACCEL_DEV_NAME },
 	{ LIS2DH12_ACCEL_DEV_NAME },
 	{ LIS3L02DQ_ACCEL_DEV_NAME },
+	{ LNG2DM_ACCEL_DEV_NAME },
 	{},
 };
 MODULE_DEVICE_TABLE(spi, st_accel_id_table);
diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
index bbdac07f4aaa..34b928cefeed 100644
--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@@ -30,6 +30,7 @@
 #include <linux/iio/trigger.h>
 #include <linux/iio/trigger_consumer.h>
 #include <linux/iio/triggered_buffer.h>
+#include <linux/pinctrl/consumer.h>
 
 /* Registers */
 #define AT91_ADC_CR		0x00		/* Control Register */
@@ -1347,6 +1348,32 @@ static int at91_adc_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int at91_adc_suspend(struct device *dev)
+{
+	struct iio_dev *idev = platform_get_drvdata(to_platform_device(dev));
+	struct at91_adc_state *st = iio_priv(idev);
+
+	pinctrl_pm_select_sleep_state(dev);
+	clk_disable_unprepare(st->clk);
+
+	return 0;
+}
+
+static int at91_adc_resume(struct device *dev)
+{
+	struct iio_dev *idev = platform_get_drvdata(to_platform_device(dev));
+	struct at91_adc_state *st = iio_priv(idev);
+
+	clk_prepare_enable(st->clk);
+	pinctrl_pm_select_default_state(dev);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(at91_adc_pm_ops, at91_adc_suspend, at91_adc_resume);
+
 static struct at91_adc_caps at91sam9260_caps = {
 	.calc_startup_ticks = calc_startup_ticks_9260,
 	.num_channels = 4,
@@ -1441,6 +1468,7 @@ static struct platform_driver at91_adc_driver = {
 	.driver = {
 		   .name = DRIVER_NAME,
 		   .of_match_table = of_match_ptr(at91_adc_dt_ids),
+		   .pm = &at91_adc_pm_ops,
 	},
 };
 
diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
index c3cfacca2541..ad9dec30bb30 100644
--- a/drivers/iio/adc/ti_am335x_adc.c
+++ b/drivers/iio/adc/ti_am335x_adc.c
@@ -30,10 +30,28 @@
 #include <linux/iio/buffer.h>
 #include <linux/iio/kfifo_buf.h>
 
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+
+#define DMA_BUFFER_SIZE		SZ_2K
+
+struct tiadc_dma {
+	struct dma_slave_config	conf;
+	struct dma_chan		*chan;
+	dma_addr_t		addr;
+	dma_cookie_t		cookie;
+	u8			*buf;
+	int			current_period;
+	int			period_size;
+	u8			fifo_thresh;
+};
+
 struct tiadc_device {
 	struct ti_tscadc_dev *mfd_tscadc;
+	struct tiadc_dma dma;
 	struct mutex fifo1_lock; /* to protect fifo access */
 	int channels;
+	int total_ch_enabled;
 	u8 channel_line[8];
 	u8 channel_step[8];
 	int buffer_en_ch_steps;
@@ -198,6 +216,67 @@ static irqreturn_t tiadc_worker_h(int irq, void *private)
 	return IRQ_HANDLED;
 }
 
+static void tiadc_dma_rx_complete(void *param)
+{
+	struct iio_dev *indio_dev = param;
+	struct tiadc_device *adc_dev = iio_priv(indio_dev);
+	struct tiadc_dma *dma = &adc_dev->dma;
+	u8 *data;
+	int i;
+
+	data = dma->buf + dma->current_period * dma->period_size;
+	dma->current_period = 1 - dma->current_period; /* swap the buffer ID */
+
+	for (i = 0; i < dma->period_size; i += indio_dev->scan_bytes) {
+		iio_push_to_buffers(indio_dev, data);
+		data += indio_dev->scan_bytes;
+	}
+}
+
+static int tiadc_start_dma(struct iio_dev *indio_dev)
+{
+	struct tiadc_device *adc_dev = iio_priv(indio_dev);
+	struct tiadc_dma *dma = &adc_dev->dma;
+	struct dma_async_tx_descriptor *desc;
+
+	dma->current_period = 0; /* We start to fill period 0 */
+	/*
+	 * Make the fifo thresh as the multiple of total number of
+	 * channels enabled, so make sure that cyclic DMA period
+	 * length is also a multiple of total number of channels
+	 * enabled. This ensures that no invalid data is reported
+	 * to the stack via iio_push_to_buffers().
+	 */
+	dma->fifo_thresh = rounddown(FIFO1_THRESHOLD + 1,
+				     adc_dev->total_ch_enabled) - 1;
+	/* Make sure that period length is multiple of fifo thresh level */
+	dma->period_size = rounddown(DMA_BUFFER_SIZE / 2,
+				    (dma->fifo_thresh + 1) * sizeof(u16));
+
+	dma->conf.src_maxburst = dma->fifo_thresh + 1;
+	dmaengine_slave_config(dma->chan, &dma->conf);
+
+	desc = dmaengine_prep_dma_cyclic(dma->chan, dma->addr,
+					 dma->period_size * 2,
+					 dma->period_size, DMA_DEV_TO_MEM,
+					 DMA_PREP_INTERRUPT);
+	if (!desc)
+		return -EBUSY;
+
+	desc->callback = tiadc_dma_rx_complete;
+	desc->callback_param = indio_dev;
+
+	dma->cookie = dmaengine_submit(desc);
+
+	dma_async_issue_pending(dma->chan);
+
+	tiadc_writel(adc_dev, REG_FIFO1THR, dma->fifo_thresh);
+	tiadc_writel(adc_dev, REG_DMA1REQ, dma->fifo_thresh);
+	tiadc_writel(adc_dev, REG_DMAENABLE_SET, DMA_FIFO1);
+
+	return 0;
+}
+
 static int tiadc_buffer_preenable(struct iio_dev *indio_dev)
 {
 	struct tiadc_device *adc_dev = iio_priv(indio_dev);
@@ -218,20 +297,30 @@ static int tiadc_buffer_preenable(struct iio_dev *indio_dev)
 static int tiadc_buffer_postenable(struct iio_dev *indio_dev)
 {
 	struct tiadc_device *adc_dev = iio_priv(indio_dev);
+	struct tiadc_dma *dma = &adc_dev->dma;
+	unsigned int irq_enable;
 	unsigned int enb = 0;
 	u8 bit;
 
 	tiadc_step_config(indio_dev);
-	for_each_set_bit(bit, indio_dev->active_scan_mask, adc_dev->channels)
+	for_each_set_bit(bit, indio_dev->active_scan_mask, adc_dev->channels) {
 		enb |= (get_adc_step_bit(adc_dev, bit) << 1);
+		adc_dev->total_ch_enabled++;
+	}
 	adc_dev->buffer_en_ch_steps = enb;
 
+	if (dma->chan)
+		tiadc_start_dma(indio_dev);
+
 	am335x_tsc_se_set_cache(adc_dev->mfd_tscadc, enb);
 
 	tiadc_writel(adc_dev,  REG_IRQSTATUS, IRQENB_FIFO1THRES
 				| IRQENB_FIFO1OVRRUN | IRQENB_FIFO1UNDRFLW);
-	tiadc_writel(adc_dev,  REG_IRQENABLE, IRQENB_FIFO1THRES
-				| IRQENB_FIFO1OVRRUN);
+
+	irq_enable = IRQENB_FIFO1OVRRUN;
+	if (!dma->chan)
+		irq_enable |= IRQENB_FIFO1THRES;
+	tiadc_writel(adc_dev,  REG_IRQENABLE, irq_enable);
 
 	return 0;
 }
@@ -239,12 +328,18 @@ static int tiadc_buffer_postenable(struct iio_dev *indio_dev)
 static int tiadc_buffer_predisable(struct iio_dev *indio_dev)
 {
 	struct tiadc_device *adc_dev = iio_priv(indio_dev);
+	struct tiadc_dma *dma = &adc_dev->dma;
 	int fifo1count, i, read;
 
 	tiadc_writel(adc_dev, REG_IRQCLR, (IRQENB_FIFO1THRES |
 				IRQENB_FIFO1OVRRUN | IRQENB_FIFO1UNDRFLW));
 	am335x_tsc_se_clr(adc_dev->mfd_tscadc, adc_dev->buffer_en_ch_steps);
 	adc_dev->buffer_en_ch_steps = 0;
+	adc_dev->total_ch_enabled = 0;
+	if (dma->chan) {
+		tiadc_writel(adc_dev, REG_DMAENABLE_CLEAR, 0x2);
+		dmaengine_terminate_async(dma->chan);
+	}
 
 	/* Flush FIFO of leftover data in the time it takes to disable adc */
 	fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
@@ -430,6 +525,41 @@ static const struct iio_info tiadc_info = {
 	.driver_module = THIS_MODULE,
 };
 
+static int tiadc_request_dma(struct platform_device *pdev,
+			     struct tiadc_device *adc_dev)
+{
+	struct tiadc_dma	*dma = &adc_dev->dma;
+	dma_cap_mask_t		mask;
+
+	/* Default slave configuration parameters */
+	dma->conf.direction = DMA_DEV_TO_MEM;
+	dma->conf.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
+	dma->conf.src_addr = adc_dev->mfd_tscadc->tscadc_phys_base + REG_FIFO1;
+
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_CYCLIC, mask);
+
+	/* Get a channel for RX */
+	dma->chan = dma_request_chan(adc_dev->mfd_tscadc->dev, "fifo1");
+	if (IS_ERR(dma->chan)) {
+		int ret = PTR_ERR(dma->chan);
+
+		dma->chan = NULL;
+		return ret;
+	}
+
+	/* RX buffer */
+	dma->buf = dma_alloc_coherent(dma->chan->device->dev, DMA_BUFFER_SIZE,
+				      &dma->addr, GFP_KERNEL);
+	if (!dma->buf)
+		goto err;
+
+	return 0;
+err:
+	dma_release_channel(dma->chan);
+	return -ENOMEM;
+}
+
 static int tiadc_parse_dt(struct platform_device *pdev,
 			  struct tiadc_device *adc_dev)
 {
@@ -512,8 +642,14 @@ static int tiadc_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, indio_dev);
 
+	err = tiadc_request_dma(pdev, adc_dev);
+	if (err && err == -EPROBE_DEFER)
+		goto err_dma;
+
 	return 0;
 
+err_dma:
+	iio_device_unregister(indio_dev);
 err_buffer_unregister:
 	tiadc_iio_buffered_hardware_remove(indio_dev);
 err_free_channels:
@@ -525,8 +661,14 @@ static int tiadc_remove(struct platform_device *pdev)
 {
 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
 	struct tiadc_device *adc_dev = iio_priv(indio_dev);
+	struct tiadc_dma *dma = &adc_dev->dma;
 	u32 step_en;
 
+	if (dma->chan) {
+		dma_free_coherent(dma->chan->device->dev, DMA_BUFFER_SIZE,
+				  dma->buf, dma->addr);
+		dma_release_channel(dma->chan);
+	}
 	iio_device_unregister(indio_dev);
 	tiadc_iio_buffered_hardware_remove(indio_dev);
 	tiadc_channels_remove(indio_dev);
diff --git a/drivers/iio/common/Kconfig b/drivers/iio/common/Kconfig
index 26a6026de614..e108996a9627 100644
--- a/drivers/iio/common/Kconfig
+++ b/drivers/iio/common/Kconfig
@@ -2,6 +2,7 @@
 # IIO common modules
 #
 
+source "drivers/iio/common/cros_ec_sensors/Kconfig"
 source "drivers/iio/common/hid-sensors/Kconfig"
 source "drivers/iio/common/ms_sensors/Kconfig"
 source "drivers/iio/common/ssp_sensors/Kconfig"
diff --git a/drivers/iio/common/Makefile b/drivers/iio/common/Makefile
index 585da6a1b188..6fa760e1bdd5 100644
--- a/drivers/iio/common/Makefile
+++ b/drivers/iio/common/Makefile
@@ -7,6 +7,7 @@
 #
 
 # When adding new entries keep the list in alphabetical order
+obj-y += cros_ec_sensors/
 obj-y += hid-sensors/
 obj-y += ms_sensors/
 obj-y += ssp_sensors/
diff --git a/drivers/iio/common/cros_ec_sensors/Kconfig b/drivers/iio/common/cros_ec_sensors/Kconfig
new file mode 100644
index 000000000000..135f6825903f
--- /dev/null
+++ b/drivers/iio/common/cros_ec_sensors/Kconfig
@@ -0,0 +1,22 @@
+#
+# Chrome OS Embedded Controller managed sensors library
+#
+config IIO_CROS_EC_SENSORS_CORE
+	tristate "ChromeOS EC Sensors Core"
+	depends on SYSFS && MFD_CROS_EC
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Base module for the ChromeOS EC Sensors module.
+	  Contains core functions used by other IIO CrosEC sensor
+	  drivers.
+	  Define common attributes and sysfs interrupt handler.
+
+config IIO_CROS_EC_SENSORS
+	tristate "ChromeOS EC Contiguous Sensors"
+	depends on IIO_CROS_EC_SENSORS_CORE
+	help
+	  Module to handle 3d contiguous sensors like
+	  Accelerometers, Gyroscope and Magnetometer that are
+	  presented by the ChromeOS EC Sensor hub.
+	  Creates an IIO device for each functions.
diff --git a/drivers/iio/common/cros_ec_sensors/Makefile b/drivers/iio/common/cros_ec_sensors/Makefile
new file mode 100644
index 000000000000..ec716ff2a775
--- /dev/null
+++ b/drivers/iio/common/cros_ec_sensors/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for sensors seen through the ChromeOS EC sensor hub.
+#
+
+obj-$(CONFIG_IIO_CROS_EC_SENSORS_CORE) += cros_ec_sensors_core.o
+obj-$(CONFIG_IIO_CROS_EC_SENSORS) += cros_ec_sensors.o
diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
new file mode 100644
index 000000000000..d6c372bb433b
--- /dev/null
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
@@ -0,0 +1,322 @@
+/*
+ * cros_ec_sensors - Driver for Chrome OS Embedded Controller sensors.
+ *
+ * Copyright (C) 2016 Google, Inc
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * This driver uses the cros-ec interface to communicate with the Chrome OS
+ * EC about sensors data. Data access is presented through iio sysfs.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/kernel.h>
+#include <linux/mfd/cros_ec.h>
+#include <linux/mfd/cros_ec_commands.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+
+#include "cros_ec_sensors_core.h"
+
+#define CROS_EC_SENSORS_MAX_CHANNELS 4
+
+/* State data for ec_sensors iio driver. */
+struct cros_ec_sensors_state {
+	/* Shared by all sensors */
+	struct cros_ec_sensors_core_state core;
+
+	struct iio_chan_spec channels[CROS_EC_SENSORS_MAX_CHANNELS];
+};
+
+static int cros_ec_sensors_read(struct iio_dev *indio_dev,
+			  struct iio_chan_spec const *chan,
+			  int *val, int *val2, long mask)
+{
+	struct cros_ec_sensors_state *st = iio_priv(indio_dev);
+	s16 data = 0;
+	s64 val64;
+	int i;
+	int ret;
+	int idx = chan->scan_index;
+
+	mutex_lock(&st->core.cmd_lock);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = st->core.read_ec_sensors_data(indio_dev, 1 << idx, &data);
+		if (ret < 0)
+			break;
+
+		*val = data;
+		break;
+	case IIO_CHAN_INFO_CALIBBIAS:
+		st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_OFFSET;
+		st->core.param.sensor_offset.flags = 0;
+
+		ret = cros_ec_motion_send_host_cmd(&st->core, 0);
+		if (ret < 0)
+			break;
+
+		/* Save values */
+		for (i = CROS_EC_SENSOR_X; i < CROS_EC_SENSOR_MAX_AXIS; i++)
+			st->core.calib[i] =
+				st->core.resp->sensor_offset.offset[i];
+
+		*val = st->core.calib[idx];
+		break;
+	case IIO_CHAN_INFO_SCALE:
+		st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_RANGE;
+		st->core.param.sensor_range.data = EC_MOTION_SENSE_NO_VALUE;
+
+		ret = cros_ec_motion_send_host_cmd(&st->core, 0);
+		if (ret < 0)
+			break;
+
+		val64 = st->core.resp->sensor_range.ret;
+		switch (st->core.type) {
+		case MOTIONSENSE_TYPE_ACCEL:
+			/*
+			 * EC returns data in g, iio exepects m/s^2.
+			 * Do not use IIO_G_TO_M_S_2 to avoid precision loss.
+			 */
+			*val = div_s64(val64 * 980665, 10);
+			*val2 = 10000 << (CROS_EC_SENSOR_BITS - 1);
+			ret = IIO_VAL_FRACTIONAL;
+			break;
+		case MOTIONSENSE_TYPE_GYRO:
+			/*
+			 * EC returns data in dps, iio expects rad/s.
+			 * Do not use IIO_DEGREE_TO_RAD to avoid precision
+			 * loss. Round to the nearest integer.
+			 */
+			*val = div_s64(val64 * 314159 + 9000000ULL, 1000);
+			*val2 = 18000 << (CROS_EC_SENSOR_BITS - 1);
+			ret = IIO_VAL_FRACTIONAL;
+			break;
+		case MOTIONSENSE_TYPE_MAG:
+			/*
+			 * EC returns data in 16LSB / uT,
+			 * iio expects Gauss
+			 */
+			*val = val64;
+			*val2 = 100 << (CROS_EC_SENSOR_BITS - 1);
+			ret = IIO_VAL_FRACTIONAL;
+			break;
+		default:
+			ret = -EINVAL;
+		}
+		break;
+	default:
+		ret = cros_ec_sensors_core_read(&st->core, chan, val, val2,
+						mask);
+		break;
+	}
+	mutex_unlock(&st->core.cmd_lock);
+
+	return ret;
+}
+
+static int cros_ec_sensors_write(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       int val, int val2, long mask)
+{
+	struct cros_ec_sensors_state *st = iio_priv(indio_dev);
+	int i;
+	int ret;
+	int idx = chan->scan_index;
+
+	mutex_lock(&st->core.cmd_lock);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_CALIBBIAS:
+		st->core.calib[idx] = val;
+
+		/* Send to EC for each axis, even if not complete */
+		st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_OFFSET;
+		st->core.param.sensor_offset.flags =
+			MOTION_SENSE_SET_OFFSET;
+		for (i = CROS_EC_SENSOR_X; i < CROS_EC_SENSOR_MAX_AXIS; i++)
+			st->core.param.sensor_offset.offset[i] =
+				st->core.calib[i];
+		st->core.param.sensor_offset.temp =
+			EC_MOTION_SENSE_INVALID_CALIB_TEMP;
+
+		ret = cros_ec_motion_send_host_cmd(&st->core, 0);
+		break;
+	case IIO_CHAN_INFO_SCALE:
+		if (st->core.type == MOTIONSENSE_TYPE_MAG) {
+			ret = -EINVAL;
+			break;
+		}
+		st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_RANGE;
+		st->core.param.sensor_range.data = val;
+
+		/* Always roundup, so caller gets at least what it asks for. */
+		st->core.param.sensor_range.roundup = 1;
+
+		ret = cros_ec_motion_send_host_cmd(&st->core, 0);
+		break;
+	default:
+		ret = cros_ec_sensors_core_write(
+				&st->core, chan, val, val2, mask);
+		break;
+	}
+
+	mutex_unlock(&st->core.cmd_lock);
+
+	return ret;
+}
+
+static const struct iio_info ec_sensors_info = {
+	.read_raw = &cros_ec_sensors_read,
+	.write_raw = &cros_ec_sensors_write,
+	.driver_module = THIS_MODULE,
+};
+
+static int cros_ec_sensors_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct cros_ec_dev *ec_dev = dev_get_drvdata(dev->parent);
+	struct cros_ec_device *ec_device;
+	struct iio_dev *indio_dev;
+	struct cros_ec_sensors_state *state;
+	struct iio_chan_spec *channel;
+	int ret, i;
+
+	if (!ec_dev || !ec_dev->ec_dev) {
+		dev_warn(&pdev->dev, "No CROS EC device found.\n");
+		return -EINVAL;
+	}
+	ec_device = ec_dev->ec_dev;
+
+	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*state));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	ret = cros_ec_sensors_core_init(pdev, indio_dev, true);
+	if (ret)
+		return ret;
+
+	indio_dev->info = &ec_sensors_info;
+	state = iio_priv(indio_dev);
+	for (channel = state->channels, i = CROS_EC_SENSOR_X;
+	     i < CROS_EC_SENSOR_MAX_AXIS; i++, channel++) {
+		/* Common part */
+		channel->info_mask_separate =
+			BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_CALIBBIAS);
+		channel->info_mask_shared_by_all =
+			BIT(IIO_CHAN_INFO_SCALE) |
+			BIT(IIO_CHAN_INFO_FREQUENCY) |
+			BIT(IIO_CHAN_INFO_SAMP_FREQ);
+		channel->scan_type.realbits = CROS_EC_SENSOR_BITS;
+		channel->scan_type.storagebits = CROS_EC_SENSOR_BITS;
+		channel->scan_index = i;
+		channel->ext_info = cros_ec_sensors_ext_info;
+		channel->modified = 1;
+		channel->channel2 = IIO_MOD_X + i;
+		channel->scan_type.sign = 's';
+
+		/* Sensor specific */
+		switch (state->core.type) {
+		case MOTIONSENSE_TYPE_ACCEL:
+			channel->type = IIO_ACCEL;
+			break;
+		case MOTIONSENSE_TYPE_GYRO:
+			channel->type = IIO_ANGL_VEL;
+			break;
+		case MOTIONSENSE_TYPE_MAG:
+			channel->type = IIO_MAGN;
+			break;
+		default:
+			dev_err(&pdev->dev, "Unknown motion sensor\n");
+			return -EINVAL;
+		}
+	}
+
+	/* Timestamp */
+	channel->type = IIO_TIMESTAMP;
+	channel->channel = -1;
+	channel->scan_index = CROS_EC_SENSOR_MAX_AXIS;
+	channel->scan_type.sign = 's';
+	channel->scan_type.realbits = 64;
+	channel->scan_type.storagebits = 64;
+
+	indio_dev->channels = state->channels;
+	indio_dev->num_channels = CROS_EC_SENSORS_MAX_CHANNELS;
+
+	/* There is only enough room for accel and gyro in the io space */
+	if ((state->core.ec->cmd_readmem != NULL) &&
+	    (state->core.type != MOTIONSENSE_TYPE_MAG))
+		state->core.read_ec_sensors_data = cros_ec_sensors_read_lpc;
+	else
+		state->core.read_ec_sensors_data = cros_ec_sensors_read_cmd;
+
+	ret = iio_triggered_buffer_setup(indio_dev, NULL,
+					 cros_ec_sensors_capture, NULL);
+	if (ret)
+		return ret;
+
+	ret = iio_device_register(indio_dev);
+	if (ret)
+		goto error_uninit_buffer;
+
+	return 0;
+
+error_uninit_buffer:
+	iio_triggered_buffer_cleanup(indio_dev);
+
+	return ret;
+}
+
+static int cros_ec_sensors_remove(struct platform_device *pdev)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+
+	iio_device_unregister(indio_dev);
+	iio_triggered_buffer_cleanup(indio_dev);
+
+	return 0;
+}
+
+static const struct platform_device_id cros_ec_sensors_ids[] = {
+	{
+		.name = "cros-ec-accel",
+	},
+	{
+		.name = "cros-ec-gyro",
+	},
+	{
+		.name = "cros-ec-mag",
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, cros_ec_sensors_ids);
+
+static struct platform_driver cros_ec_sensors_platform_driver = {
+	.driver = {
+		.name	= "cros-ec-sensors",
+	},
+	.probe		= cros_ec_sensors_probe,
+	.remove		= cros_ec_sensors_remove,
+	.id_table	= cros_ec_sensors_ids,
+};
+module_platform_driver(cros_ec_sensors_platform_driver);
+
+MODULE_DESCRIPTION("ChromeOS EC 3-axis sensors driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
new file mode 100644
index 000000000000..a3be7991355e
--- /dev/null
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
@@ -0,0 +1,450 @@
+/*
+ * cros_ec_sensors_core - Common function for Chrome OS EC sensor driver.
+ *
+ * Copyright (C) 2016 Google, Inc
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/kernel.h>
+#include <linux/mfd/cros_ec.h>
+#include <linux/mfd/cros_ec_commands.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/platform_device.h>
+
+#include "cros_ec_sensors_core.h"
+
+static char *cros_ec_loc[] = {
+	[MOTIONSENSE_LOC_BASE] = "base",
+	[MOTIONSENSE_LOC_LID] = "lid",
+	[MOTIONSENSE_LOC_MAX] = "unknown",
+};
+
+int cros_ec_sensors_core_init(struct platform_device *pdev,
+			      struct iio_dev *indio_dev,
+			      bool physical_device)
+{
+	struct device *dev = &pdev->dev;
+	struct cros_ec_sensors_core_state *state = iio_priv(indio_dev);
+	struct cros_ec_dev *ec = dev_get_drvdata(pdev->dev.parent);
+	struct cros_ec_sensor_platform *sensor_platform = dev_get_platdata(dev);
+
+	platform_set_drvdata(pdev, indio_dev);
+
+	state->ec = ec->ec_dev;
+	state->msg = devm_kzalloc(&pdev->dev,
+				max((u16)sizeof(struct ec_params_motion_sense),
+				state->ec->max_response), GFP_KERNEL);
+	if (!state->msg)
+		return -ENOMEM;
+
+	state->resp = (struct ec_response_motion_sense *)state->msg->data;
+
+	mutex_init(&state->cmd_lock);
+
+	/* Set up the host command structure. */
+	state->msg->version = 2;
+	state->msg->command = EC_CMD_MOTION_SENSE_CMD + ec->cmd_offset;
+	state->msg->outsize = sizeof(struct ec_params_motion_sense);
+
+	indio_dev->dev.parent = &pdev->dev;
+	indio_dev->name = pdev->name;
+
+	if (physical_device) {
+		indio_dev->modes = INDIO_DIRECT_MODE;
+
+		state->param.cmd = MOTIONSENSE_CMD_INFO;
+		state->param.info.sensor_num = sensor_platform->sensor_num;
+		if (cros_ec_motion_send_host_cmd(state, 0)) {
+			dev_warn(dev, "Can not access sensor info\n");
+			return -EIO;
+		}
+		state->type = state->resp->info.type;
+		state->loc = state->resp->info.location;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cros_ec_sensors_core_init);
+
+int cros_ec_motion_send_host_cmd(struct cros_ec_sensors_core_state *state,
+				 u16 opt_length)
+{
+	int ret;
+
+	if (opt_length)
+		state->msg->insize = min(opt_length, state->ec->max_response);
+	else
+		state->msg->insize = state->ec->max_response;
+
+	memcpy(state->msg->data, &state->param, sizeof(state->param));
+
+	ret = cros_ec_cmd_xfer_status(state->ec, state->msg);
+	if (ret < 0)
+		return -EIO;
+
+	if (ret &&
+	    state->resp != (struct ec_response_motion_sense *)state->msg->data)
+		memcpy(state->resp, state->msg->data, ret);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cros_ec_motion_send_host_cmd);
+
+static ssize_t cros_ec_sensors_calibrate(struct iio_dev *indio_dev,
+		uintptr_t private, const struct iio_chan_spec *chan,
+		const char *buf, size_t len)
+{
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+	int ret, i;
+	bool calibrate;
+
+	ret = strtobool(buf, &calibrate);
+	if (ret < 0)
+		return ret;
+	if (!calibrate)
+		return -EINVAL;
+
+	mutex_lock(&st->cmd_lock);
+	st->param.cmd = MOTIONSENSE_CMD_PERFORM_CALIB;
+	ret = cros_ec_motion_send_host_cmd(st, 0);
+	if (ret != 0) {
+		dev_warn(&indio_dev->dev, "Unable to calibrate sensor\n");
+	} else {
+		/* Save values */
+		for (i = CROS_EC_SENSOR_X; i < CROS_EC_SENSOR_MAX_AXIS; i++)
+			st->calib[i] = st->resp->perform_calib.offset[i];
+	}
+	mutex_unlock(&st->cmd_lock);
+
+	return ret ? ret : len;
+}
+
+static ssize_t cros_ec_sensors_loc(struct iio_dev *indio_dev,
+		uintptr_t private, const struct iio_chan_spec *chan,
+		char *buf)
+{
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+
+	return snprintf(buf, PAGE_SIZE, "%s\n", cros_ec_loc[st->loc]);
+}
+
+const struct iio_chan_spec_ext_info cros_ec_sensors_ext_info[] = {
+	{
+		.name = "calibrate",
+		.shared = IIO_SHARED_BY_ALL,
+		.write = cros_ec_sensors_calibrate
+	},
+	{
+		.name = "location",
+		.shared = IIO_SHARED_BY_ALL,
+		.read = cros_ec_sensors_loc
+	},
+	{ },
+};
+EXPORT_SYMBOL_GPL(cros_ec_sensors_ext_info);
+
+/**
+ * cros_ec_sensors_idx_to_reg - convert index into offset in shared memory
+ * @st:		pointer to state information for device
+ * @idx:	sensor index (should be element of enum sensor_index)
+ *
+ * Return:	address to read at
+ */
+static unsigned int cros_ec_sensors_idx_to_reg(
+					struct cros_ec_sensors_core_state *st,
+					unsigned int idx)
+{
+	/*
+	 * When using LPC interface, only space for 2 Accel and one Gyro.
+	 * First halfword of MOTIONSENSE_TYPE_ACCEL is used by angle.
+	 */
+	if (st->type == MOTIONSENSE_TYPE_ACCEL)
+		return EC_MEMMAP_ACC_DATA + sizeof(u16) *
+			(1 + idx + st->param.info.sensor_num *
+			 CROS_EC_SENSOR_MAX_AXIS);
+
+	return EC_MEMMAP_GYRO_DATA + sizeof(u16) * idx;
+}
+
+static int cros_ec_sensors_cmd_read_u8(struct cros_ec_device *ec,
+				       unsigned int offset, u8 *dest)
+{
+	return ec->cmd_readmem(ec, offset, 1, dest);
+}
+
+static int cros_ec_sensors_cmd_read_u16(struct cros_ec_device *ec,
+					 unsigned int offset, u16 *dest)
+{
+	__le16 tmp;
+	int ret = ec->cmd_readmem(ec, offset, 2, &tmp);
+
+	if (ret >= 0)
+		*dest = le16_to_cpu(tmp);
+
+	return ret;
+}
+
+/**
+ * cros_ec_sensors_read_until_not_busy() - read until is not busy
+ *
+ * @st:	pointer to state information for device
+ *
+ * Read from EC status byte until it reads not busy.
+ * Return: 8-bit status if ok, -errno on failure.
+ */
+static int cros_ec_sensors_read_until_not_busy(
+					struct cros_ec_sensors_core_state *st)
+{
+	struct cros_ec_device *ec = st->ec;
+	u8 status;
+	int ret, attempts = 0;
+
+	ret = cros_ec_sensors_cmd_read_u8(ec, EC_MEMMAP_ACC_STATUS, &status);
+	if (ret < 0)
+		return ret;
+
+	while (status & EC_MEMMAP_ACC_STATUS_BUSY_BIT) {
+		/* Give up after enough attempts, return error. */
+		if (attempts++ >= 50)
+			return -EIO;
+
+		/* Small delay every so often. */
+		if (attempts % 5 == 0)
+			msleep(25);
+
+		ret = cros_ec_sensors_cmd_read_u8(ec, EC_MEMMAP_ACC_STATUS,
+						  &status);
+		if (ret < 0)
+			return ret;
+	}
+
+	return status;
+}
+
+/**
+ * read_ec_sensors_data_unsafe() - read acceleration data from EC shared memory
+ * @indio_dev:	pointer to IIO device
+ * @scan_mask:	bitmap of the sensor indices to scan
+ * @data:	location to store data
+ *
+ * This is the unsafe function for reading the EC data. It does not guarantee
+ * that the EC will not modify the data as it is being read in.
+ *
+ * Return: 0 on success, -errno on failure.
+ */
+static int cros_ec_sensors_read_data_unsafe(struct iio_dev *indio_dev,
+			 unsigned long scan_mask, s16 *data)
+{
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+	struct cros_ec_device *ec = st->ec;
+	unsigned int i;
+	int ret;
+
+	/* Read all sensors enabled in scan_mask. Each value is 2 bytes. */
+	for_each_set_bit(i, &scan_mask, indio_dev->masklength) {
+		ret = cros_ec_sensors_cmd_read_u16(ec,
+					     cros_ec_sensors_idx_to_reg(st, i),
+					     data);
+		if (ret < 0)
+			return ret;
+
+		data++;
+	}
+
+	return 0;
+}
+
+int cros_ec_sensors_read_lpc(struct iio_dev *indio_dev,
+			     unsigned long scan_mask, s16 *data)
+{
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+	struct cros_ec_device *ec = st->ec;
+	u8 samp_id = 0xff, status = 0;
+	int ret, attempts = 0;
+
+	/*
+	 * Continually read all data from EC until the status byte after
+	 * all reads reflects that the EC is not busy and the sample id
+	 * matches the sample id from before all reads. This guarantees
+	 * that data read in was not modified by the EC while reading.
+	 */
+	while ((status & (EC_MEMMAP_ACC_STATUS_BUSY_BIT |
+			  EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK)) != samp_id) {
+		/* If we have tried to read too many times, return error. */
+		if (attempts++ >= 5)
+			return -EIO;
+
+		/* Read status byte until EC is not busy. */
+		status = cros_ec_sensors_read_until_not_busy(st);
+		if (status < 0)
+			return status;
+
+		/*
+		 * Store the current sample id so that we can compare to the
+		 * sample id after reading the data.
+		 */
+		samp_id = status & EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK;
+
+		/* Read all EC data, format it, and store it into data. */
+		ret = cros_ec_sensors_read_data_unsafe(indio_dev, scan_mask,
+						       data);
+		if (ret < 0)
+			return ret;
+
+		/* Read status byte. */
+		ret = cros_ec_sensors_cmd_read_u8(ec, EC_MEMMAP_ACC_STATUS,
+						  &status);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cros_ec_sensors_read_lpc);
+
+int cros_ec_sensors_read_cmd(struct iio_dev *indio_dev,
+			     unsigned long scan_mask, s16 *data)
+{
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+	int ret;
+	unsigned int i;
+
+	/* Read all sensor data through a command. */
+	st->param.cmd = MOTIONSENSE_CMD_DATA;
+	ret = cros_ec_motion_send_host_cmd(st, sizeof(st->resp->data));
+	if (ret != 0) {
+		dev_warn(&indio_dev->dev, "Unable to read sensor data\n");
+		return ret;
+	}
+
+	for_each_set_bit(i, &scan_mask, indio_dev->masklength) {
+		*data = st->resp->data.data[i];
+		data++;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cros_ec_sensors_read_cmd);
+
+irqreturn_t cros_ec_sensors_capture(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&st->cmd_lock);
+
+	/* Clear capture data. */
+	memset(st->samples, 0, indio_dev->scan_bytes);
+
+	/* Read data based on which channels are enabled in scan mask. */
+	ret = st->read_ec_sensors_data(indio_dev,
+				       *(indio_dev->active_scan_mask),
+				       (s16 *)st->samples);
+	if (ret < 0)
+		goto done;
+
+	iio_push_to_buffers_with_timestamp(indio_dev, st->samples,
+					   iio_get_time_ns(indio_dev));
+
+done:
+	/*
+	 * Tell the core we are done with this trigger and ready for the
+	 * next one.
+	 */
+	iio_trigger_notify_done(indio_dev->trig);
+
+	mutex_unlock(&st->cmd_lock);
+
+	return IRQ_HANDLED;
+}
+EXPORT_SYMBOL_GPL(cros_ec_sensors_capture);
+
+int cros_ec_sensors_core_read(struct cros_ec_sensors_core_state *st,
+			  struct iio_chan_spec const *chan,
+			  int *val, int *val2, long mask)
+{
+	int ret = IIO_VAL_INT;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		st->param.cmd = MOTIONSENSE_CMD_EC_RATE;
+		st->param.ec_rate.data =
+			EC_MOTION_SENSE_NO_VALUE;
+
+		if (cros_ec_motion_send_host_cmd(st, 0))
+			ret = -EIO;
+		else
+			*val = st->resp->ec_rate.ret;
+		break;
+	case IIO_CHAN_INFO_FREQUENCY:
+		st->param.cmd = MOTIONSENSE_CMD_SENSOR_ODR;
+		st->param.sensor_odr.data =
+			EC_MOTION_SENSE_NO_VALUE;
+
+		if (cros_ec_motion_send_host_cmd(st, 0))
+			ret = -EIO;
+		else
+			*val = st->resp->sensor_odr.ret;
+		break;
+	default:
+		break;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(cros_ec_sensors_core_read);
+
+int cros_ec_sensors_core_write(struct cros_ec_sensors_core_state *st,
+			       struct iio_chan_spec const *chan,
+			       int val, int val2, long mask)
+{
+	int ret = 0;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_FREQUENCY:
+		st->param.cmd = MOTIONSENSE_CMD_SENSOR_ODR;
+		st->param.sensor_odr.data = val;
+
+		/* Always roundup, so caller gets at least what it asks for. */
+		st->param.sensor_odr.roundup = 1;
+
+		if (cros_ec_motion_send_host_cmd(st, 0))
+			ret = -EIO;
+		break;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		st->param.cmd = MOTIONSENSE_CMD_EC_RATE;
+		st->param.ec_rate.data = val;
+
+		if (cros_ec_motion_send_host_cmd(st, 0))
+			ret = -EIO;
+		else
+			st->curr_sampl_freq = val;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+EXPORT_SYMBOL_GPL(cros_ec_sensors_core_write);
+
+MODULE_DESCRIPTION("ChromeOS EC sensor hub core functions");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.h b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.h
new file mode 100644
index 000000000000..8bc2ca3c2e2e
--- /dev/null
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.h
@@ -0,0 +1,175 @@
+/*
+ * ChromeOS EC sensor hub
+ *
+ * Copyright (C) 2016 Google, Inc
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __CROS_EC_SENSORS_CORE_H
+#define __CROS_EC_SENSORS_CORE_H
+
+#include <linux/irqreturn.h>
+
+enum {
+	CROS_EC_SENSOR_X,
+	CROS_EC_SENSOR_Y,
+	CROS_EC_SENSOR_Z,
+	CROS_EC_SENSOR_MAX_AXIS,
+};
+
+/* EC returns sensor values using signed 16 bit registers */
+#define CROS_EC_SENSOR_BITS 16
+
+/*
+ * 4 16 bit channels are allowed.
+ * Good enough for current sensors, they use up to 3 16 bit vectors.
+ */
+#define CROS_EC_SAMPLE_SIZE  (sizeof(s64) * 2)
+
+/* Minimum sampling period to use when device is suspending */
+#define CROS_EC_MIN_SUSPEND_SAMPLING_FREQUENCY 1000  /* 1 second */
+
+/**
+ * struct cros_ec_sensors_core_state - state data for EC sensors IIO driver
+ * @ec:				cros EC device structure
+ * @cmd_lock:			lock used to prevent simultaneous access to the
+ *				commands.
+ * @msg:			cros EC command structure
+ * @param:			motion sensor parameters structure
+ * @resp:			motion sensor response structure
+ * @type:			type of motion sensor
+ * @loc:			location where the motion sensor is placed
+ * @calib:			calibration parameters. Note that trigger
+ *				captured data will always provide the calibrated
+ *				data
+ * @samples:			static array to hold data from a single capture.
+ *				For each channel we need 2 bytes, except for
+ *				the timestamp. The timestamp is always last and
+ *				is always 8-byte aligned.
+ * @read_ec_sensors_data:	function used for accessing sensors values
+ * @cuur_sampl_freq:		current sampling period
+ */
+struct cros_ec_sensors_core_state {
+	struct cros_ec_device *ec;
+	struct mutex cmd_lock;
+
+	struct cros_ec_command *msg;
+	struct ec_params_motion_sense param;
+	struct ec_response_motion_sense *resp;
+
+	enum motionsensor_type type;
+	enum motionsensor_location loc;
+
+	s16 calib[CROS_EC_SENSOR_MAX_AXIS];
+
+	u8 samples[CROS_EC_SAMPLE_SIZE];
+
+	int (*read_ec_sensors_data)(struct iio_dev *indio_dev,
+				    unsigned long scan_mask, s16 *data);
+
+	int curr_sampl_freq;
+};
+
+/**
+ * cros_ec_sensors_read_lpc() - retrieve data from EC shared memory
+ * @indio_dev:	pointer to IIO device
+ * @scan_mask:	bitmap of the sensor indices to scan
+ * @data:	location to store data
+ *
+ * This is the safe function for reading the EC data. It guarantees that the
+ * data sampled was not modified by the EC while being read.
+ *
+ * Return: 0 on success, -errno on failure.
+ */
+int cros_ec_sensors_read_lpc(struct iio_dev *indio_dev, unsigned long scan_mask,
+			     s16 *data);
+
+/**
+ * cros_ec_sensors_read_cmd() - retrieve data using the EC command protocol
+ * @indio_dev:	pointer to IIO device
+ * @scan_mask:	bitmap of the sensor indices to scan
+ * @data:	location to store data
+ *
+ * Return: 0 on success, -errno on failure.
+ */
+int cros_ec_sensors_read_cmd(struct iio_dev *indio_dev, unsigned long scan_mask,
+			     s16 *data);
+
+/**
+ * cros_ec_sensors_core_init() - basic initialization of the core structure
+ * @pdev:		platform device created for the sensors
+ * @indio_dev:		iio device structure of the device
+ * @physical_device:	true if the device refers to a physical device
+ *
+ * Return: 0 on success, -errno on failure.
+ */
+int cros_ec_sensors_core_init(struct platform_device *pdev,
+			      struct iio_dev *indio_dev, bool physical_device);
+
+/**
+ * cros_ec_sensors_capture() - the trigger handler function
+ * @irq:	the interrupt number.
+ * @p:		a pointer to the poll function.
+ *
+ * On a trigger event occurring, if the pollfunc is attached then this
+ * handler is called as a threaded interrupt (and hence may sleep). It
+ * is responsible for grabbing data from the device and pushing it into
+ * the associated buffer.
+ *
+ * Return: IRQ_HANDLED
+ */
+irqreturn_t cros_ec_sensors_capture(int irq, void *p);
+
+/**
+ * cros_ec_motion_send_host_cmd() - send motion sense host command
+ * @st:		pointer to state information for device
+ * @opt_length:	optional length to reduce the response size, useful on the data
+ *		path. Otherwise, the maximal allowed response size is used
+ *
+ * When called, the sub-command is assumed to be set in param->cmd.
+ *
+ * Return: 0 on success, -errno on failure.
+ */
+int cros_ec_motion_send_host_cmd(struct cros_ec_sensors_core_state *st,
+				 u16 opt_length);
+
+/**
+ * cros_ec_sensors_core_read() - function to request a value from the sensor
+ * @st:		pointer to state information for device
+ * @chan:	channel specification structure table
+ * @val:	will contain one element making up the returned value
+ * @val2:	will contain another element making up the returned value
+ * @mask:	specifies which values to be requested
+ *
+ * Return:	the type of value returned by the device
+ */
+int cros_ec_sensors_core_read(struct cros_ec_sensors_core_state *st,
+			      struct iio_chan_spec const *chan,
+			      int *val, int *val2, long mask);
+
+/**
+ * cros_ec_sensors_core_write() - function to write a value to the sensor
+ * @st:		pointer to state information for device
+ * @chan:	channel specification structure table
+ * @val:	first part of value to write
+ * @val2:	second part of value to write
+ * @mask:	specifies which values to write
+ *
+ * Return:	the type of value returned by the device
+ */
+int cros_ec_sensors_core_write(struct cros_ec_sensors_core_state *st,
+			       struct iio_chan_spec const *chan,
+			       int val, int val2, long mask);
+
+/* List of extended channel specification for all sensors */
+extern const struct iio_chan_spec_ext_info cros_ec_sensors_ext_info[];
+
+#endif  /* __CROS_EC_SENSORS_CORE_H */
diff --git a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
index dc33c1dd5191..4509f8475c54 100644
--- a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
+++ b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
@@ -201,7 +201,7 @@ int hid_sensor_write_samp_freq_value(struct hid_sensor_common *st,
 	int ret;
 
 	if (val1 < 0 || val2 < 0)
-		ret = -EINVAL;
+		return -EINVAL;
 
 	value = val1 * pow_10(6) + val2;
 	if (value) {
@@ -250,6 +250,9 @@ int hid_sensor_write_raw_hyst_value(struct hid_sensor_common *st,
 	s32 value;
 	int ret;
 
+	if (val1 < 0 || val2 < 0)
+		return -EINVAL;
+
 	value = convert_to_vtf_format(st->sensitivity.size,
 				st->sensitivity.unit_expo,
 				val1, val2);
diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig
index 205a84420ae9..107b5efd4178 100644
--- a/drivers/iio/gyro/Kconfig
+++ b/drivers/iio/gyro/Kconfig
@@ -84,6 +84,23 @@ config HID_SENSOR_GYRO_3D
 	  Say yes here to build support for the HID SENSOR
 	  Gyroscope 3D.
 
+config MPU3050
+	tristate
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	select REGMAP
+
+config MPU3050_I2C
+	tristate "Invensense MPU3050 devices on I2C"
+	depends on !(INPUT_MPU3050=y || INPUT_MPU3050=m)
+	select MPU3050
+	select REGMAP_I2C
+	select I2C_MUX
+	help
+	  This driver supports the Invensense MPU3050 gyroscope over I2C.
+	  This driver can be built as a module. The module will be called
+	  inv-mpu3050-i2c.
+
 config IIO_ST_GYRO_3AXIS
 	tristate "STMicroelectronics gyroscopes 3-Axis Driver"
 	depends on (I2C || SPI_MASTER) && SYSFS
diff --git a/drivers/iio/gyro/Makefile b/drivers/iio/gyro/Makefile
index f866a4be0667..f0e149a606b0 100644
--- a/drivers/iio/gyro/Makefile
+++ b/drivers/iio/gyro/Makefile
@@ -14,6 +14,11 @@ obj-$(CONFIG_BMG160_SPI) += bmg160_spi.o
 
 obj-$(CONFIG_HID_SENSOR_GYRO_3D) += hid-sensor-gyro-3d.o
 
+# Currently this is rolled into one module, split it if
+# we ever create a separate SPI interface for MPU-3050
+obj-$(CONFIG_MPU3050) += mpu3050.o
+mpu3050-objs := mpu3050-core.o mpu3050-i2c.o
+
 itg3200-y               := itg3200_core.o
 itg3200-$(CONFIG_IIO_BUFFER) += itg3200_buffer.o
 obj-$(CONFIG_ITG3200)   += itg3200.o
diff --git a/drivers/iio/gyro/mpu3050-core.c b/drivers/iio/gyro/mpu3050-core.c
new file mode 100644
index 000000000000..ed681c70a7b4
--- /dev/null
+++ b/drivers/iio/gyro/mpu3050-core.c
@@ -0,0 +1,1307 @@
+/*
+ * MPU3050 gyroscope driver
+ *
+ * Copyright (C) 2016 Linaro Ltd.
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * Based on the input subsystem driver, Copyright (C) 2011 Wistron Co.Ltd
+ * Joseph Lai <joseph_lai@wistron.com> and trimmed down by
+ * Alan Cox <alan@linux.intel.com> in turn based on bma023.c.
+ * Device behaviour based on a misc driver posted by Nathan Royer in 2011.
+ *
+ * TODO: add support for setting up the low pass 3dB frequency.
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/random.h>
+#include <linux/slab.h>
+
+#include "mpu3050.h"
+
+#define MPU3050_CHIP_ID		0x69
+
+/*
+ * Register map: anything suffixed *_H is a big-endian high byte and always
+ * followed by the corresponding low byte (*_L) even though these are not
+ * explicitly included in the register definitions.
+ */
+#define MPU3050_CHIP_ID_REG	0x00
+#define MPU3050_PRODUCT_ID_REG	0x01
+#define MPU3050_XG_OFFS_TC	0x05
+#define MPU3050_YG_OFFS_TC	0x08
+#define MPU3050_ZG_OFFS_TC	0x0B
+#define MPU3050_X_OFFS_USR_H	0x0C
+#define MPU3050_Y_OFFS_USR_H	0x0E
+#define MPU3050_Z_OFFS_USR_H	0x10
+#define MPU3050_FIFO_EN		0x12
+#define MPU3050_AUX_VDDIO	0x13
+#define MPU3050_SLV_ADDR	0x14
+#define MPU3050_SMPLRT_DIV	0x15
+#define MPU3050_DLPF_FS_SYNC	0x16
+#define MPU3050_INT_CFG		0x17
+#define MPU3050_AUX_ADDR	0x18
+#define MPU3050_INT_STATUS	0x1A
+#define MPU3050_TEMP_H		0x1B
+#define MPU3050_XOUT_H		0x1D
+#define MPU3050_YOUT_H		0x1F
+#define MPU3050_ZOUT_H		0x21
+#define MPU3050_DMP_CFG1	0x35
+#define MPU3050_DMP_CFG2	0x36
+#define MPU3050_BANK_SEL	0x37
+#define MPU3050_MEM_START_ADDR	0x38
+#define MPU3050_MEM_R_W		0x39
+#define MPU3050_FIFO_COUNT_H	0x3A
+#define MPU3050_FIFO_R		0x3C
+#define MPU3050_USR_CTRL	0x3D
+#define MPU3050_PWR_MGM		0x3E
+
+/* MPU memory bank read options */
+#define MPU3050_MEM_PRFTCH	BIT(5)
+#define MPU3050_MEM_USER_BANK	BIT(4)
+/* Bits 8-11 select memory bank */
+#define MPU3050_MEM_RAM_BANK_0	0
+#define MPU3050_MEM_RAM_BANK_1	1
+#define MPU3050_MEM_RAM_BANK_2	2
+#define MPU3050_MEM_RAM_BANK_3	3
+#define MPU3050_MEM_OTP_BANK_0	4
+
+#define MPU3050_AXIS_REGS(axis) (MPU3050_XOUT_H + (axis * 2))
+
+/* Register bits */
+
+/* FIFO Enable */
+#define MPU3050_FIFO_EN_FOOTER		BIT(0)
+#define MPU3050_FIFO_EN_AUX_ZOUT	BIT(1)
+#define MPU3050_FIFO_EN_AUX_YOUT	BIT(2)
+#define MPU3050_FIFO_EN_AUX_XOUT	BIT(3)
+#define MPU3050_FIFO_EN_GYRO_ZOUT	BIT(4)
+#define MPU3050_FIFO_EN_GYRO_YOUT	BIT(5)
+#define MPU3050_FIFO_EN_GYRO_XOUT	BIT(6)
+#define MPU3050_FIFO_EN_TEMP_OUT	BIT(7)
+
+/*
+ * Digital Low Pass filter (DLPF)
+ * Full Scale (FS)
+ * and Synchronization
+ */
+#define MPU3050_EXT_SYNC_NONE		0x00
+#define MPU3050_EXT_SYNC_TEMP		0x20
+#define MPU3050_EXT_SYNC_GYROX		0x40
+#define MPU3050_EXT_SYNC_GYROY		0x60
+#define MPU3050_EXT_SYNC_GYROZ		0x80
+#define MPU3050_EXT_SYNC_ACCELX	0xA0
+#define MPU3050_EXT_SYNC_ACCELY	0xC0
+#define MPU3050_EXT_SYNC_ACCELZ	0xE0
+#define MPU3050_EXT_SYNC_MASK		0xE0
+#define MPU3050_EXT_SYNC_SHIFT		5
+
+#define MPU3050_FS_250DPS		0x00
+#define MPU3050_FS_500DPS		0x08
+#define MPU3050_FS_1000DPS		0x10
+#define MPU3050_FS_2000DPS		0x18
+#define MPU3050_FS_MASK			0x18
+#define MPU3050_FS_SHIFT		3
+
+#define MPU3050_DLPF_CFG_256HZ_NOLPF2	0x00
+#define MPU3050_DLPF_CFG_188HZ		0x01
+#define MPU3050_DLPF_CFG_98HZ		0x02
+#define MPU3050_DLPF_CFG_42HZ		0x03
+#define MPU3050_DLPF_CFG_20HZ		0x04
+#define MPU3050_DLPF_CFG_10HZ		0x05
+#define MPU3050_DLPF_CFG_5HZ		0x06
+#define MPU3050_DLPF_CFG_2100HZ_NOLPF	0x07
+#define MPU3050_DLPF_CFG_MASK		0x07
+#define MPU3050_DLPF_CFG_SHIFT		0
+
+/* Interrupt config */
+#define MPU3050_INT_RAW_RDY_EN		BIT(0)
+#define MPU3050_INT_DMP_DONE_EN		BIT(1)
+#define MPU3050_INT_MPU_RDY_EN		BIT(2)
+#define MPU3050_INT_ANYRD_2CLEAR	BIT(4)
+#define MPU3050_INT_LATCH_EN		BIT(5)
+#define MPU3050_INT_OPEN		BIT(6)
+#define MPU3050_INT_ACTL		BIT(7)
+/* Interrupt status */
+#define MPU3050_INT_STATUS_RAW_RDY	BIT(0)
+#define MPU3050_INT_STATUS_DMP_DONE	BIT(1)
+#define MPU3050_INT_STATUS_MPU_RDY	BIT(2)
+#define MPU3050_INT_STATUS_FIFO_OVFLW	BIT(7)
+/* USR_CTRL */
+#define MPU3050_USR_CTRL_FIFO_EN	BIT(6)
+#define MPU3050_USR_CTRL_AUX_IF_EN	BIT(5)
+#define MPU3050_USR_CTRL_AUX_IF_RST	BIT(3)
+#define MPU3050_USR_CTRL_FIFO_RST	BIT(1)
+#define MPU3050_USR_CTRL_GYRO_RST	BIT(0)
+/* PWR_MGM */
+#define MPU3050_PWR_MGM_PLL_X		0x01
+#define MPU3050_PWR_MGM_PLL_Y		0x02
+#define MPU3050_PWR_MGM_PLL_Z		0x03
+#define MPU3050_PWR_MGM_CLKSEL_MASK	0x07
+#define MPU3050_PWR_MGM_STBY_ZG		BIT(3)
+#define MPU3050_PWR_MGM_STBY_YG		BIT(4)
+#define MPU3050_PWR_MGM_STBY_XG		BIT(5)
+#define MPU3050_PWR_MGM_SLEEP		BIT(6)
+#define MPU3050_PWR_MGM_RESET		BIT(7)
+#define MPU3050_PWR_MGM_MASK		0xff
+
+/*
+ * Fullscale precision is (for finest precision) +/- 250 deg/s, so the full
+ * scale is actually 500 deg/s. All 16 bits are then used to cover this scale,
+ * in two's complement.
+ */
+static unsigned int mpu3050_fs_precision[] = {
+	IIO_DEGREE_TO_RAD(250),
+	IIO_DEGREE_TO_RAD(500),
+	IIO_DEGREE_TO_RAD(1000),
+	IIO_DEGREE_TO_RAD(2000)
+};
+
+/*
+ * Regulator names
+ */
+static const char mpu3050_reg_vdd[] = "vdd";
+static const char mpu3050_reg_vlogic[] = "vlogic";
+
+static unsigned int mpu3050_get_freq(struct mpu3050 *mpu3050)
+{
+	unsigned int freq;
+
+	if (mpu3050->lpf == MPU3050_DLPF_CFG_256HZ_NOLPF2)
+		freq = 8000;
+	else
+		freq = 1000;
+	freq /= (mpu3050->divisor + 1);
+
+	return freq;
+}
+
+static int mpu3050_start_sampling(struct mpu3050 *mpu3050)
+{
+	__be16 raw_val[3];
+	int ret;
+	int i;
+
+	/* Reset */
+	ret = regmap_update_bits(mpu3050->map, MPU3050_PWR_MGM,
+				 MPU3050_PWR_MGM_RESET, MPU3050_PWR_MGM_RESET);
+	if (ret)
+		return ret;
+
+	/* Turn on the Z-axis PLL */
+	ret = regmap_update_bits(mpu3050->map, MPU3050_PWR_MGM,
+				 MPU3050_PWR_MGM_CLKSEL_MASK,
+				 MPU3050_PWR_MGM_PLL_Z);
+	if (ret)
+		return ret;
+
+	/* Write calibration offset registers */
+	for (i = 0; i < 3; i++)
+		raw_val[i] = cpu_to_be16(mpu3050->calibration[i]);
+
+	ret = regmap_bulk_write(mpu3050->map, MPU3050_X_OFFS_USR_H, raw_val,
+				sizeof(raw_val));
+	if (ret)
+		return ret;
+
+	/* Set low pass filter (sample rate), sync and full scale */
+	ret = regmap_write(mpu3050->map, MPU3050_DLPF_FS_SYNC,
+			   MPU3050_EXT_SYNC_NONE << MPU3050_EXT_SYNC_SHIFT |
+			   mpu3050->fullscale << MPU3050_FS_SHIFT |
+			   mpu3050->lpf << MPU3050_DLPF_CFG_SHIFT);
+	if (ret)
+		return ret;
+
+	/* Set up sampling frequency */
+	ret = regmap_write(mpu3050->map, MPU3050_SMPLRT_DIV, mpu3050->divisor);
+	if (ret)
+		return ret;
+
+	/*
+	 * Max 50 ms start-up time after setting DLPF_FS_SYNC
+	 * according to the data sheet, then wait for the next sample
+	 * at this frequency T = 1000/f ms.
+	 */
+	msleep(50 + 1000 / mpu3050_get_freq(mpu3050));
+
+	return 0;
+}
+
+static int mpu3050_set_8khz_samplerate(struct mpu3050 *mpu3050)
+{
+	int ret;
+	u8 divisor;
+	enum mpu3050_lpf lpf;
+
+	lpf = mpu3050->lpf;
+	divisor = mpu3050->divisor;
+
+	mpu3050->lpf = LPF_256_HZ_NOLPF; /* 8 kHz base frequency */
+	mpu3050->divisor = 0; /* Divide by 1 */
+	ret = mpu3050_start_sampling(mpu3050);
+
+	mpu3050->lpf = lpf;
+	mpu3050->divisor = divisor;
+
+	return ret;
+}
+
+static int mpu3050_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int *val, int *val2,
+			    long mask)
+{
+	struct mpu3050 *mpu3050 = iio_priv(indio_dev);
+	int ret;
+	__be16 raw_val;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_OFFSET:
+		switch (chan->type) {
+		case IIO_TEMP:
+			/* The temperature scaling is (x+23000)/280 Celsius */
+			*val = 23000;
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_CALIBBIAS:
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+			*val = mpu3050->calibration[chan->scan_index-1];
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*val = mpu3050_get_freq(mpu3050);
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_TEMP:
+			/* Millidegrees, see about temperature scaling above */
+			*val = 1000;
+			*val2 = 280;
+			return IIO_VAL_FRACTIONAL;
+		case IIO_ANGL_VEL:
+			/*
+			 * Convert to the corresponding full scale in
+			 * radians. All 16 bits are used with sign to
+			 * span the available scale: to account for the one
+			 * missing value if we multiply by 1/S16_MAX, instead
+			 * multiply with 2/U16_MAX.
+			 */
+			*val = mpu3050_fs_precision[mpu3050->fullscale] * 2;
+			*val2 = U16_MAX;
+			return IIO_VAL_FRACTIONAL;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_RAW:
+		/* Resume device */
+		pm_runtime_get_sync(mpu3050->dev);
+		mutex_lock(&mpu3050->lock);
+
+		ret = mpu3050_set_8khz_samplerate(mpu3050);
+		if (ret)
+			goto out_read_raw_unlock;
+
+		switch (chan->type) {
+		case IIO_TEMP:
+			ret = regmap_bulk_read(mpu3050->map, MPU3050_TEMP_H,
+					       &raw_val, sizeof(raw_val));
+			if (ret) {
+				dev_err(mpu3050->dev,
+					"error reading temperature\n");
+				goto out_read_raw_unlock;
+			}
+
+			*val = be16_to_cpu(raw_val);
+			ret = IIO_VAL_INT;
+
+			goto out_read_raw_unlock;
+		case IIO_ANGL_VEL:
+			ret = regmap_bulk_read(mpu3050->map,
+				       MPU3050_AXIS_REGS(chan->scan_index-1),
+				       &raw_val,
+				       sizeof(raw_val));
+			if (ret) {
+				dev_err(mpu3050->dev,
+					"error reading axis data\n");
+				goto out_read_raw_unlock;
+			}
+
+			*val = be16_to_cpu(raw_val);
+			ret = IIO_VAL_INT;
+
+			goto out_read_raw_unlock;
+		default:
+			ret = -EINVAL;
+			goto out_read_raw_unlock;
+		}
+	default:
+		break;
+	}
+
+	return -EINVAL;
+
+out_read_raw_unlock:
+	mutex_unlock(&mpu3050->lock);
+	pm_runtime_mark_last_busy(mpu3050->dev);
+	pm_runtime_put_autosuspend(mpu3050->dev);
+
+	return ret;
+}
+
+static int mpu3050_write_raw(struct iio_dev *indio_dev,
+			     const struct iio_chan_spec *chan,
+			     int val, int val2, long mask)
+{
+	struct mpu3050 *mpu3050 = iio_priv(indio_dev);
+	/*
+	 * Couldn't figure out a way to precalculate these at compile time.
+	 */
+	unsigned int fs250 =
+		DIV_ROUND_CLOSEST(mpu3050_fs_precision[0] * 1000000 * 2,
+				  U16_MAX);
+	unsigned int fs500 =
+		DIV_ROUND_CLOSEST(mpu3050_fs_precision[1] * 1000000 * 2,
+				  U16_MAX);
+	unsigned int fs1000 =
+		DIV_ROUND_CLOSEST(mpu3050_fs_precision[2] * 1000000 * 2,
+				  U16_MAX);
+	unsigned int fs2000 =
+		DIV_ROUND_CLOSEST(mpu3050_fs_precision[3] * 1000000 * 2,
+				  U16_MAX);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_CALIBBIAS:
+		if (chan->type != IIO_ANGL_VEL)
+			return -EINVAL;
+		mpu3050->calibration[chan->scan_index-1] = val;
+		return 0;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		/*
+		 * The max samplerate is 8000 Hz, the minimum
+		 * 1000 / 256 ~= 4 Hz
+		 */
+		if (val < 4 || val > 8000)
+			return -EINVAL;
+
+		/*
+		 * Above 1000 Hz we must turn off the digital low pass filter
+		 * so we get a base frequency of 8kHz to the divider
+		 */
+		if (val > 1000) {
+			mpu3050->lpf = LPF_256_HZ_NOLPF;
+			mpu3050->divisor = DIV_ROUND_CLOSEST(8000, val) - 1;
+			return 0;
+		}
+
+		mpu3050->lpf = LPF_188_HZ;
+		mpu3050->divisor = DIV_ROUND_CLOSEST(1000, val) - 1;
+		return 0;
+	case IIO_CHAN_INFO_SCALE:
+		if (chan->type != IIO_ANGL_VEL)
+			return -EINVAL;
+		/*
+		 * We support +/-250, +/-500, +/-1000 and +/2000 deg/s
+		 * which means we need to round to the closest radians
+		 * which will be roughly +/-4.3, +/-8.7, +/-17.5, +/-35
+		 * rad/s. The scale is then for the 16 bits used to cover
+		 * it 2/(2^16) of that.
+		 */
+
+		/* Just too large, set the max range */
+		if (val != 0) {
+			mpu3050->fullscale = FS_2000_DPS;
+			return 0;
+		}
+
+		/*
+		 * Now we're dealing with fractions below zero in millirad/s
+		 * do some integer interpolation and match with the closest
+		 * fullscale in the table.
+		 */
+		if (val2 <= fs250 ||
+		    val2 < ((fs500 + fs250) / 2))
+			mpu3050->fullscale = FS_250_DPS;
+		else if (val2 <= fs500 ||
+			 val2 < ((fs1000 + fs500) / 2))
+			mpu3050->fullscale = FS_500_DPS;
+		else if (val2 <= fs1000 ||
+			 val2 < ((fs2000 + fs1000) / 2))
+			mpu3050->fullscale = FS_1000_DPS;
+		else
+			/* Catch-all */
+			mpu3050->fullscale = FS_2000_DPS;
+		return 0;
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
+static irqreturn_t mpu3050_trigger_handler(int irq, void *p)
+{
+	const struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct mpu3050 *mpu3050 = iio_priv(indio_dev);
+	int ret;
+	/*
+	 * Temperature 1*16 bits
+	 * Three axes 3*16 bits
+	 * Timestamp 64 bits (4*16 bits)
+	 * Sum total 8*16 bits
+	 */
+	__be16 hw_values[8];
+	s64 timestamp;
+	unsigned int datums_from_fifo = 0;
+
+	/*
+	 * If we're using the hardware trigger, get the precise timestamp from
+	 * the top half of the threaded IRQ handler. Otherwise get the
+	 * timestamp here so it will be close in time to the actual values
+	 * read from the registers.
+	 */
+	if (iio_trigger_using_own(indio_dev))
+		timestamp = mpu3050->hw_timestamp;
+	else
+		timestamp = iio_get_time_ns(indio_dev);
+
+	mutex_lock(&mpu3050->lock);
+
+	/* Using the hardware IRQ trigger? Check the buffer then. */
+	if (mpu3050->hw_irq_trigger) {
+		__be16 raw_fifocnt;
+		u16 fifocnt;
+		/* X, Y, Z + temperature */
+		unsigned int bytes_per_datum = 8;
+		bool fifo_overflow = false;
+
+		ret = regmap_bulk_read(mpu3050->map,
+				       MPU3050_FIFO_COUNT_H,
+				       &raw_fifocnt,
+				       sizeof(raw_fifocnt));
+		if (ret)
+			goto out_trigger_unlock;
+		fifocnt = be16_to_cpu(raw_fifocnt);
+
+		if (fifocnt == 512) {
+			dev_info(mpu3050->dev,
+				 "FIFO overflow! Emptying and resetting FIFO\n");
+			fifo_overflow = true;
+			/* Reset and enable the FIFO */
+			ret = regmap_update_bits(mpu3050->map,
+						 MPU3050_USR_CTRL,
+						 MPU3050_USR_CTRL_FIFO_EN |
+						 MPU3050_USR_CTRL_FIFO_RST,
+						 MPU3050_USR_CTRL_FIFO_EN |
+						 MPU3050_USR_CTRL_FIFO_RST);
+			if (ret) {
+				dev_info(mpu3050->dev, "error resetting FIFO\n");
+				goto out_trigger_unlock;
+			}
+			mpu3050->pending_fifo_footer = false;
+		}
+
+		if (fifocnt)
+			dev_dbg(mpu3050->dev,
+				"%d bytes in the FIFO\n",
+				fifocnt);
+
+		while (!fifo_overflow && fifocnt > bytes_per_datum) {
+			unsigned int toread;
+			unsigned int offset;
+			__be16 fifo_values[5];
+
+			/*
+			 * If there is a FIFO footer in the pipe, first clear
+			 * that out. This follows the complex algorithm in the
+			 * datasheet that states that you may never leave the
+			 * FIFO empty after the first reading: you have to
+			 * always leave two footer bytes in it. The footer is
+			 * in practice just two zero bytes.
+			 */
+			if (mpu3050->pending_fifo_footer) {
+				toread = bytes_per_datum + 2;
+				offset = 0;
+			} else {
+				toread = bytes_per_datum;
+				offset = 1;
+				/* Put in some dummy value */
+				fifo_values[0] = 0xAAAA;
+			}
+
+			ret = regmap_bulk_read(mpu3050->map,
+					       MPU3050_FIFO_R,
+					       &fifo_values[offset],
+					       toread);
+
+			dev_dbg(mpu3050->dev,
+				"%04x %04x %04x %04x %04x\n",
+				fifo_values[0],
+				fifo_values[1],
+				fifo_values[2],
+				fifo_values[3],
+				fifo_values[4]);
+
+			/* Index past the footer (fifo_values[0]) and push */
+			iio_push_to_buffers_with_timestamp(indio_dev,
+							   &fifo_values[1],
+							   timestamp);
+
+			fifocnt -= toread;
+			datums_from_fifo++;
+			mpu3050->pending_fifo_footer = true;
+
+			/*
+			 * If we're emptying the FIFO, just make sure to
+			 * check if something new appeared.
+			 */
+			if (fifocnt < bytes_per_datum) {
+				ret = regmap_bulk_read(mpu3050->map,
+						       MPU3050_FIFO_COUNT_H,
+						       &raw_fifocnt,
+						       sizeof(raw_fifocnt));
+				if (ret)
+					goto out_trigger_unlock;
+				fifocnt = be16_to_cpu(raw_fifocnt);
+			}
+
+			if (fifocnt < bytes_per_datum)
+				dev_dbg(mpu3050->dev,
+					"%d bytes left in the FIFO\n",
+					fifocnt);
+
+			/*
+			 * At this point, the timestamp that triggered the
+			 * hardware interrupt is no longer valid for what
+			 * we are reading (the interrupt likely fired for
+			 * the value on the top of the FIFO), so set the
+			 * timestamp to zero and let userspace deal with it.
+			 */
+			timestamp = 0;
+		}
+	}
+
+	/*
+	 * If we picked some datums from the FIFO that's enough, else
+	 * fall through and just read from the current value registers.
+	 * This happens in two cases:
+	 *
+	 * - We are using some other trigger (external, like an HRTimer)
+	 *   than the sensor's own sample generator. In this case the
+	 *   sensor is just set to the max sampling frequency and we give
+	 *   the trigger a copy of the latest value every time we get here.
+	 *
+	 * - The hardware trigger is active but unused and we actually use
+	 *   another trigger which calls here with a frequency higher
+	 *   than what the device provides data. We will then just read
+	 *   duplicate values directly from the hardware registers.
+	 */
+	if (datums_from_fifo) {
+		dev_dbg(mpu3050->dev,
+			"read %d datums from the FIFO\n",
+			datums_from_fifo);
+		goto out_trigger_unlock;
+	}
+
+	ret = regmap_bulk_read(mpu3050->map, MPU3050_TEMP_H, &hw_values,
+			       sizeof(hw_values));
+	if (ret) {
+		dev_err(mpu3050->dev,
+			"error reading axis data\n");
+		goto out_trigger_unlock;
+	}
+
+	iio_push_to_buffers_with_timestamp(indio_dev, hw_values, timestamp);
+
+out_trigger_unlock:
+	mutex_unlock(&mpu3050->lock);
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static int mpu3050_buffer_preenable(struct iio_dev *indio_dev)
+{
+	struct mpu3050 *mpu3050 = iio_priv(indio_dev);
+
+	pm_runtime_get_sync(mpu3050->dev);
+
+	/* Unless we have OUR trigger active, run at full speed */
+	if (!mpu3050->hw_irq_trigger)
+		return mpu3050_set_8khz_samplerate(mpu3050);
+
+	return 0;
+}
+
+static int mpu3050_buffer_postdisable(struct iio_dev *indio_dev)
+{
+	struct mpu3050 *mpu3050 = iio_priv(indio_dev);
+
+	pm_runtime_mark_last_busy(mpu3050->dev);
+	pm_runtime_put_autosuspend(mpu3050->dev);
+
+	return 0;
+}
+
+static const struct iio_buffer_setup_ops mpu3050_buffer_setup_ops = {
+	.preenable = mpu3050_buffer_preenable,
+	.postenable = iio_triggered_buffer_postenable,
+	.predisable = iio_triggered_buffer_predisable,
+	.postdisable = mpu3050_buffer_postdisable,
+};
+
+static const struct iio_mount_matrix *
+mpu3050_get_mount_matrix(const struct iio_dev *indio_dev,
+			 const struct iio_chan_spec *chan)
+{
+	struct mpu3050 *mpu3050 = iio_priv(indio_dev);
+
+	return &mpu3050->orientation;
+}
+
+static const struct iio_chan_spec_ext_info mpu3050_ext_info[] = {
+	IIO_MOUNT_MATRIX(IIO_SHARED_BY_TYPE, mpu3050_get_mount_matrix),
+	{ },
+};
+
+#define MPU3050_AXIS_CHANNEL(axis, index)				\
+	{								\
+		.type = IIO_ANGL_VEL,					\
+		.modified = 1,						\
+		.channel2 = IIO_MOD_##axis,				\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |		\
+			BIT(IIO_CHAN_INFO_CALIBBIAS),			\
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),\
+		.ext_info = mpu3050_ext_info,				\
+		.scan_index = index,					\
+		.scan_type = {						\
+			.sign = 's',					\
+			.realbits = 16,					\
+			.storagebits = 16,				\
+			.endianness = IIO_BE,				\
+		},							\
+	}
+
+static const struct iio_chan_spec mpu3050_channels[] = {
+	{
+		.type = IIO_TEMP,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE) |
+				      BIT(IIO_CHAN_INFO_OFFSET),
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.scan_index = 0,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 16,
+			.storagebits = 16,
+			.endianness = IIO_BE,
+		},
+	},
+	MPU3050_AXIS_CHANNEL(X, 1),
+	MPU3050_AXIS_CHANNEL(Y, 2),
+	MPU3050_AXIS_CHANNEL(Z, 3),
+	IIO_CHAN_SOFT_TIMESTAMP(4),
+};
+
+/* Four channels apart from timestamp, scan mask = 0x0f */
+static const unsigned long mpu3050_scan_masks[] = { 0xf, 0 };
+
+/*
+ * These are just the hardcoded factors resulting from the more elaborate
+ * calculations done with fractions in the scale raw get/set functions.
+ */
+static IIO_CONST_ATTR(anglevel_scale_available,
+		      "0.000122070 "
+		      "0.000274658 "
+		      "0.000518798 "
+		      "0.001068115");
+
+static struct attribute *mpu3050_attributes[] = {
+	&iio_const_attr_anglevel_scale_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group mpu3050_attribute_group = {
+	.attrs = mpu3050_attributes,
+};
+
+static const struct iio_info mpu3050_info = {
+	.driver_module = THIS_MODULE,
+	.read_raw = mpu3050_read_raw,
+	.write_raw = mpu3050_write_raw,
+	.attrs = &mpu3050_attribute_group,
+	.driver_module = THIS_MODULE,
+};
+
+/**
+ * mpu3050_read_mem() - read MPU-3050 internal memory
+ * @mpu3050: device to read from
+ * @bank: target bank
+ * @addr: target address
+ * @len: number of bytes
+ * @buf: the buffer to store the read bytes in
+ */
+static int mpu3050_read_mem(struct mpu3050 *mpu3050,
+			    u8 bank,
+			    u8 addr,
+			    u8 len,
+			    u8 *buf)
+{
+	int ret;
+
+	ret = regmap_write(mpu3050->map,
+			   MPU3050_BANK_SEL,
+			   bank);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(mpu3050->map,
+			   MPU3050_MEM_START_ADDR,
+			   addr);
+	if (ret)
+		return ret;
+
+	return regmap_bulk_read(mpu3050->map,
+				MPU3050_MEM_R_W,
+				buf,
+				len);
+}
+
+static int mpu3050_hw_init(struct mpu3050 *mpu3050)
+{
+	int ret;
+	u8 otp[8];
+
+	/* Reset */
+	ret = regmap_update_bits(mpu3050->map,
+				 MPU3050_PWR_MGM,
+				 MPU3050_PWR_MGM_RESET,
+				 MPU3050_PWR_MGM_RESET);
+	if (ret)
+		return ret;
+
+	/* Turn on the PLL */
+	ret = regmap_update_bits(mpu3050->map,
+				 MPU3050_PWR_MGM,
+				 MPU3050_PWR_MGM_CLKSEL_MASK,
+				 MPU3050_PWR_MGM_PLL_Z);
+	if (ret)
+		return ret;
+
+	/* Disable IRQs */
+	ret = regmap_write(mpu3050->map,
+			   MPU3050_INT_CFG,
+			   0);
+	if (ret)
+		return ret;
+
+	/* Read out the 8 bytes of OTP (one-time-programmable) memory */
+	ret = mpu3050_read_mem(mpu3050,
+			       (MPU3050_MEM_PRFTCH |
+				MPU3050_MEM_USER_BANK |
+				MPU3050_MEM_OTP_BANK_0),
+			       0,
+			       sizeof(otp),
+			       otp);
+	if (ret)
+		return ret;
+
+	/* This is device-unique data so it goes into the entropy pool */
+	add_device_randomness(otp, sizeof(otp));
+
+	dev_info(mpu3050->dev,
+		 "die ID: %04X, wafer ID: %02X, A lot ID: %04X, "
+		 "W lot ID: %03X, WP ID: %01X, rev ID: %02X\n",
+		 /* Die ID, bits 0-12 */
+		 (otp[1] << 8 | otp[0]) & 0x1fff,
+		 /* Wafer ID, bits 13-17 */
+		 ((otp[2] << 8 | otp[1]) & 0x03e0) >> 5,
+		 /* A lot ID, bits 18-33 */
+		 ((otp[4] << 16 | otp[3] << 8 | otp[2]) & 0x3fffc) >> 2,
+		 /* W lot ID, bits 34-45 */
+		 ((otp[5] << 8 | otp[4]) & 0x3ffc) >> 2,
+		 /* WP ID, bits 47-49 */
+		 ((otp[6] << 8 | otp[5]) & 0x0380) >> 7,
+		 /* rev ID, bits 50-55 */
+		 otp[6] >> 2);
+
+	return 0;
+}
+
+static int mpu3050_power_up(struct mpu3050 *mpu3050)
+{
+	int ret;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(mpu3050->regs), mpu3050->regs);
+	if (ret) {
+		dev_err(mpu3050->dev, "cannot enable regulators\n");
+		return ret;
+	}
+	/*
+	 * 20-100 ms start-up time for register read/write according to
+	 * the datasheet, be on the safe side and wait 200 ms.
+	 */
+	msleep(200);
+
+	/* Take device out of sleep mode */
+	ret = regmap_update_bits(mpu3050->map, MPU3050_PWR_MGM,
+				 MPU3050_PWR_MGM_SLEEP, 0);
+	if (ret) {
+		dev_err(mpu3050->dev, "error setting power mode\n");
+		return ret;
+	}
+	msleep(10);
+
+	return 0;
+}
+
+static int mpu3050_power_down(struct mpu3050 *mpu3050)
+{
+	int ret;
+
+	/*
+	 * Put MPU-3050 into sleep mode before cutting regulators.
+	 * This is important, because we may not be the sole user
+	 * of the regulator so the power may stay on after this, and
+	 * then we would be wasting power unless we go to sleep mode
+	 * first.
+	 */
+	ret = regmap_update_bits(mpu3050->map, MPU3050_PWR_MGM,
+				 MPU3050_PWR_MGM_SLEEP, MPU3050_PWR_MGM_SLEEP);
+	if (ret)
+		dev_err(mpu3050->dev, "error putting to sleep\n");
+
+	ret = regulator_bulk_disable(ARRAY_SIZE(mpu3050->regs), mpu3050->regs);
+	if (ret)
+		dev_err(mpu3050->dev, "error disabling regulators\n");
+
+	return 0;
+}
+
+static irqreturn_t mpu3050_irq_handler(int irq, void *p)
+{
+	struct iio_trigger *trig = p;
+	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+	struct mpu3050 *mpu3050 = iio_priv(indio_dev);
+
+	if (!mpu3050->hw_irq_trigger)
+		return IRQ_NONE;
+
+	/* Get the time stamp as close in time as possible */
+	mpu3050->hw_timestamp = iio_get_time_ns(indio_dev);
+
+	return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t mpu3050_irq_thread(int irq, void *p)
+{
+	struct iio_trigger *trig = p;
+	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+	struct mpu3050 *mpu3050 = iio_priv(indio_dev);
+	unsigned int val;
+	int ret;
+
+	/* ACK IRQ and check if it was from us */
+	ret = regmap_read(mpu3050->map, MPU3050_INT_STATUS, &val);
+	if (ret) {
+		dev_err(mpu3050->dev, "error reading IRQ status\n");
+		return IRQ_HANDLED;
+	}
+	if (!(val & MPU3050_INT_STATUS_RAW_RDY))
+		return IRQ_NONE;
+
+	iio_trigger_poll_chained(p);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * mpu3050_drdy_trigger_set_state() - set data ready interrupt state
+ * @trig: trigger instance
+ * @enable: true if trigger should be enabled, false to disable
+ */
+static int mpu3050_drdy_trigger_set_state(struct iio_trigger *trig,
+					  bool enable)
+{
+	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+	struct mpu3050 *mpu3050 = iio_priv(indio_dev);
+	unsigned int val;
+	int ret;
+
+	/* Disabling trigger: disable interrupt and return */
+	if (!enable) {
+		/* Disable all interrupts */
+		ret = regmap_write(mpu3050->map,
+				   MPU3050_INT_CFG,
+				   0);
+		if (ret)
+			dev_err(mpu3050->dev, "error disabling IRQ\n");
+
+		/* Clear IRQ flag */
+		ret = regmap_read(mpu3050->map, MPU3050_INT_STATUS, &val);
+		if (ret)
+			dev_err(mpu3050->dev, "error clearing IRQ status\n");
+
+		/* Disable all things in the FIFO and reset it */
+		ret = regmap_write(mpu3050->map, MPU3050_FIFO_EN, 0);
+		if (ret)
+			dev_err(mpu3050->dev, "error disabling FIFO\n");
+
+		ret = regmap_write(mpu3050->map, MPU3050_USR_CTRL,
+				   MPU3050_USR_CTRL_FIFO_RST);
+		if (ret)
+			dev_err(mpu3050->dev, "error resetting FIFO\n");
+
+		pm_runtime_mark_last_busy(mpu3050->dev);
+		pm_runtime_put_autosuspend(mpu3050->dev);
+		mpu3050->hw_irq_trigger = false;
+
+		return 0;
+	} else {
+		/* Else we're enabling the trigger from this point */
+		pm_runtime_get_sync(mpu3050->dev);
+		mpu3050->hw_irq_trigger = true;
+
+		/* Disable all things in the FIFO */
+		ret = regmap_write(mpu3050->map, MPU3050_FIFO_EN, 0);
+		if (ret)
+			return ret;
+
+		/* Reset and enable the FIFO */
+		ret = regmap_update_bits(mpu3050->map, MPU3050_USR_CTRL,
+					 MPU3050_USR_CTRL_FIFO_EN |
+					 MPU3050_USR_CTRL_FIFO_RST,
+					 MPU3050_USR_CTRL_FIFO_EN |
+					 MPU3050_USR_CTRL_FIFO_RST);
+		if (ret)
+			return ret;
+
+		mpu3050->pending_fifo_footer = false;
+
+		/* Turn on the FIFO for temp+X+Y+Z */
+		ret = regmap_write(mpu3050->map, MPU3050_FIFO_EN,
+				   MPU3050_FIFO_EN_TEMP_OUT |
+				   MPU3050_FIFO_EN_GYRO_XOUT |
+				   MPU3050_FIFO_EN_GYRO_YOUT |
+				   MPU3050_FIFO_EN_GYRO_ZOUT |
+				   MPU3050_FIFO_EN_FOOTER);
+		if (ret)
+			return ret;
+
+		/* Configure the sample engine */
+		ret = mpu3050_start_sampling(mpu3050);
+		if (ret)
+			return ret;
+
+		/* Clear IRQ flag */
+		ret = regmap_read(mpu3050->map, MPU3050_INT_STATUS, &val);
+		if (ret)
+			dev_err(mpu3050->dev, "error clearing IRQ status\n");
+
+		/* Give us interrupts whenever there is new data ready */
+		val = MPU3050_INT_RAW_RDY_EN;
+
+		if (mpu3050->irq_actl)
+			val |= MPU3050_INT_ACTL;
+		if (mpu3050->irq_latch)
+			val |= MPU3050_INT_LATCH_EN;
+		if (mpu3050->irq_opendrain)
+			val |= MPU3050_INT_OPEN;
+
+		ret = regmap_write(mpu3050->map, MPU3050_INT_CFG, val);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static const struct iio_trigger_ops mpu3050_trigger_ops = {
+	.owner = THIS_MODULE,
+	.set_trigger_state = mpu3050_drdy_trigger_set_state,
+};
+
+static int mpu3050_trigger_probe(struct iio_dev *indio_dev, int irq)
+{
+	struct mpu3050 *mpu3050 = iio_priv(indio_dev);
+	unsigned long irq_trig;
+	int ret;
+
+	mpu3050->trig = devm_iio_trigger_alloc(&indio_dev->dev,
+					       "%s-dev%d",
+					       indio_dev->name,
+					       indio_dev->id);
+	if (!mpu3050->trig)
+		return -ENOMEM;
+
+	/* Check if IRQ is open drain */
+	if (of_property_read_bool(mpu3050->dev->of_node, "drive-open-drain"))
+		mpu3050->irq_opendrain = true;
+
+	irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq));
+	/*
+	 * Configure the interrupt generator hardware to supply whatever
+	 * the interrupt is configured for, edges low/high level low/high,
+	 * we can provide it all.
+	 */
+	switch (irq_trig) {
+	case IRQF_TRIGGER_RISING:
+		dev_info(&indio_dev->dev,
+			 "pulse interrupts on the rising edge\n");
+		if (mpu3050->irq_opendrain) {
+			dev_info(&indio_dev->dev,
+				 "rising edge incompatible with open drain\n");
+			mpu3050->irq_opendrain = false;
+		}
+		break;
+	case IRQF_TRIGGER_FALLING:
+		mpu3050->irq_actl = true;
+		dev_info(&indio_dev->dev,
+			 "pulse interrupts on the falling edge\n");
+		break;
+	case IRQF_TRIGGER_HIGH:
+		mpu3050->irq_latch = true;
+		dev_info(&indio_dev->dev,
+			 "interrupts active high level\n");
+		if (mpu3050->irq_opendrain) {
+			dev_info(&indio_dev->dev,
+				 "active high incompatible with open drain\n");
+			mpu3050->irq_opendrain = false;
+		}
+		/*
+		 * With level IRQs, we mask the IRQ until it is processed,
+		 * but with edge IRQs (pulses) we can queue several interrupts
+		 * in the top half.
+		 */
+		irq_trig |= IRQF_ONESHOT;
+		break;
+	case IRQF_TRIGGER_LOW:
+		mpu3050->irq_latch = true;
+		mpu3050->irq_actl = true;
+		irq_trig |= IRQF_ONESHOT;
+		dev_info(&indio_dev->dev,
+			 "interrupts active low level\n");
+		break;
+	default:
+		/* This is the most preferred mode, if possible */
+		dev_err(&indio_dev->dev,
+			"unsupported IRQ trigger specified (%lx), enforce "
+			"rising edge\n", irq_trig);
+		irq_trig = IRQF_TRIGGER_RISING;
+		break;
+	}
+
+	/* An open drain line can be shared with several devices */
+	if (mpu3050->irq_opendrain)
+		irq_trig |= IRQF_SHARED;
+
+	ret = request_threaded_irq(irq,
+				   mpu3050_irq_handler,
+				   mpu3050_irq_thread,
+				   irq_trig,
+				   mpu3050->trig->name,
+				   mpu3050->trig);
+	if (ret) {
+		dev_err(mpu3050->dev,
+			"can't get IRQ %d, error %d\n", irq, ret);
+		return ret;
+	}
+
+	mpu3050->irq = irq;
+	mpu3050->trig->dev.parent = mpu3050->dev;
+	mpu3050->trig->ops = &mpu3050_trigger_ops;
+	iio_trigger_set_drvdata(mpu3050->trig, indio_dev);
+
+	ret = iio_trigger_register(mpu3050->trig);
+	if (ret)
+		return ret;
+
+	indio_dev->trig = iio_trigger_get(mpu3050->trig);
+
+	return 0;
+}
+
+int mpu3050_common_probe(struct device *dev,
+			 struct regmap *map,
+			 int irq,
+			 const char *name)
+{
+	struct iio_dev *indio_dev;
+	struct mpu3050 *mpu3050;
+	unsigned int val;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*mpu3050));
+	if (!indio_dev)
+		return -ENOMEM;
+	mpu3050 = iio_priv(indio_dev);
+
+	mpu3050->dev = dev;
+	mpu3050->map = map;
+	mutex_init(&mpu3050->lock);
+	/* Default fullscale: 2000 degrees per second */
+	mpu3050->fullscale = FS_2000_DPS;
+	/* 1 kHz, divide by 100, default frequency = 10 Hz */
+	mpu3050->lpf = MPU3050_DLPF_CFG_188HZ;
+	mpu3050->divisor = 99;
+
+	/* Read the mounting matrix, if present */
+	ret = of_iio_read_mount_matrix(dev, "mount-matrix",
+				       &mpu3050->orientation);
+	if (ret)
+		return ret;
+
+	/* Fetch and turn on regulators */
+	mpu3050->regs[0].supply = mpu3050_reg_vdd;
+	mpu3050->regs[1].supply = mpu3050_reg_vlogic;
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(mpu3050->regs),
+				      mpu3050->regs);
+	if (ret) {
+		dev_err(dev, "Cannot get regulators\n");
+		return ret;
+	}
+
+	ret = mpu3050_power_up(mpu3050);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(map, MPU3050_CHIP_ID_REG, &val);
+	if (ret) {
+		dev_err(dev, "could not read device ID\n");
+		ret = -ENODEV;
+
+		goto err_power_down;
+	}
+
+	if (val != MPU3050_CHIP_ID) {
+		dev_err(dev, "unsupported chip id %02x\n", (u8)val);
+		ret = -ENODEV;
+		goto err_power_down;
+	}
+
+	ret = regmap_read(map, MPU3050_PRODUCT_ID_REG, &val);
+	if (ret) {
+		dev_err(dev, "could not read device ID\n");
+		ret = -ENODEV;
+
+		goto err_power_down;
+	}
+	dev_info(dev, "found MPU-3050 part no: %d, version: %d\n",
+		 ((val >> 4) & 0xf), (val & 0xf));
+
+	ret = mpu3050_hw_init(mpu3050);
+	if (ret)
+		goto err_power_down;
+
+	indio_dev->dev.parent = dev;
+	indio_dev->channels = mpu3050_channels;
+	indio_dev->num_channels = ARRAY_SIZE(mpu3050_channels);
+	indio_dev->info = &mpu3050_info;
+	indio_dev->available_scan_masks = mpu3050_scan_masks;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->name = name;
+
+	ret = iio_triggered_buffer_setup(indio_dev, iio_pollfunc_store_time,
+					 mpu3050_trigger_handler,
+					 &mpu3050_buffer_setup_ops);
+	if (ret) {
+		dev_err(dev, "triggered buffer setup failed\n");
+		goto err_power_down;
+	}
+
+	ret = iio_device_register(indio_dev);
+	if (ret) {
+		dev_err(dev, "device register failed\n");
+		goto err_cleanup_buffer;
+	}
+
+	dev_set_drvdata(dev, indio_dev);
+
+	/* Check if we have an assigned IRQ to use as trigger */
+	if (irq) {
+		ret = mpu3050_trigger_probe(indio_dev, irq);
+		if (ret)
+			dev_err(dev, "failed to register trigger\n");
+	}
+
+	/* Enable runtime PM */
+	pm_runtime_get_noresume(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+	/*
+	 * Set autosuspend to two orders of magnitude larger than the
+	 * start-up time. 100ms start-up time means 10000ms autosuspend,
+	 * i.e. 10 seconds.
+	 */
+	pm_runtime_set_autosuspend_delay(dev, 10000);
+	pm_runtime_use_autosuspend(dev);
+	pm_runtime_put(dev);
+
+	return 0;
+
+err_cleanup_buffer:
+	iio_triggered_buffer_cleanup(indio_dev);
+err_power_down:
+	mpu3050_power_down(mpu3050);
+
+	return ret;
+}
+EXPORT_SYMBOL(mpu3050_common_probe);
+
+int mpu3050_common_remove(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct mpu3050 *mpu3050 = iio_priv(indio_dev);
+
+	pm_runtime_get_sync(dev);
+	pm_runtime_put_noidle(dev);
+	pm_runtime_disable(dev);
+	iio_triggered_buffer_cleanup(indio_dev);
+	if (mpu3050->irq)
+		free_irq(mpu3050->irq, mpu3050);
+	iio_device_unregister(indio_dev);
+	mpu3050_power_down(mpu3050);
+
+	return 0;
+}
+EXPORT_SYMBOL(mpu3050_common_remove);
+
+#ifdef CONFIG_PM
+static int mpu3050_runtime_suspend(struct device *dev)
+{
+	return mpu3050_power_down(iio_priv(dev_get_drvdata(dev)));
+}
+
+static int mpu3050_runtime_resume(struct device *dev)
+{
+	return mpu3050_power_up(iio_priv(dev_get_drvdata(dev)));
+}
+#endif /* CONFIG_PM */
+
+const struct dev_pm_ops mpu3050_dev_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				pm_runtime_force_resume)
+	SET_RUNTIME_PM_OPS(mpu3050_runtime_suspend,
+			   mpu3050_runtime_resume, NULL)
+};
+EXPORT_SYMBOL(mpu3050_dev_pm_ops);
+
+MODULE_AUTHOR("Linus Walleij");
+MODULE_DESCRIPTION("MPU3050 gyroscope driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/gyro/mpu3050-i2c.c b/drivers/iio/gyro/mpu3050-i2c.c
new file mode 100644
index 000000000000..06007200bf49
--- /dev/null
+++ b/drivers/iio/gyro/mpu3050-i2c.c
@@ -0,0 +1,124 @@
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/i2c-mux.h>
+#include <linux/iio/iio.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/pm_runtime.h>
+
+#include "mpu3050.h"
+
+static const struct regmap_config mpu3050_i2c_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static int mpu3050_i2c_bypass_select(struct i2c_mux_core *mux, u32 chan_id)
+{
+	struct mpu3050 *mpu3050 = i2c_mux_priv(mux);
+
+	/* Just power up the device, that is all that is needed */
+	pm_runtime_get_sync(mpu3050->dev);
+	return 0;
+}
+
+static int mpu3050_i2c_bypass_deselect(struct i2c_mux_core *mux, u32 chan_id)
+{
+	struct mpu3050 *mpu3050 = i2c_mux_priv(mux);
+
+	pm_runtime_mark_last_busy(mpu3050->dev);
+	pm_runtime_put_autosuspend(mpu3050->dev);
+	return 0;
+}
+
+static int mpu3050_i2c_probe(struct i2c_client *client,
+			     const struct i2c_device_id *id)
+{
+	struct regmap *regmap;
+	const char *name;
+	struct mpu3050 *mpu3050;
+	int ret;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_I2C_BLOCK))
+		return -EOPNOTSUPP;
+
+	if (id)
+		name = id->name;
+	else
+		return -ENODEV;
+
+	regmap = devm_regmap_init_i2c(client, &mpu3050_i2c_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(&client->dev, "Failed to register i2c regmap %d\n",
+			(int)PTR_ERR(regmap));
+		return PTR_ERR(regmap);
+	}
+
+	ret = mpu3050_common_probe(&client->dev, regmap, client->irq, name);
+	if (ret)
+		return ret;
+
+	/* The main driver is up, now register the I2C mux */
+	mpu3050 = iio_priv(dev_get_drvdata(&client->dev));
+	mpu3050->i2cmux = i2c_mux_alloc(client->adapter, &client->dev,
+					1, 0, I2C_MUX_LOCKED | I2C_MUX_GATE,
+					mpu3050_i2c_bypass_select,
+					mpu3050_i2c_bypass_deselect);
+	/* Just fail the mux, there is no point in killing the driver */
+	if (!mpu3050->i2cmux)
+		dev_err(&client->dev, "failed to allocate I2C mux\n");
+	else {
+		mpu3050->i2cmux->priv = mpu3050;
+		ret = i2c_mux_add_adapter(mpu3050->i2cmux, 0, 0, 0);
+		if (ret)
+			dev_err(&client->dev, "failed to add I2C mux\n");
+	}
+
+	return 0;
+}
+
+static int mpu3050_i2c_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(&client->dev);
+	struct mpu3050 *mpu3050 = iio_priv(indio_dev);
+
+	if (mpu3050->i2cmux)
+		i2c_mux_del_adapters(mpu3050->i2cmux);
+
+	return mpu3050_common_remove(&client->dev);
+}
+
+/*
+ * device id table is used to identify what device can be
+ * supported by this driver
+ */
+static const struct i2c_device_id mpu3050_i2c_id[] = {
+	{ "mpu3050" },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, mpu3050_i2c_id);
+
+static const struct of_device_id mpu3050_i2c_of_match[] = {
+	{ .compatible = "invensense,mpu3050", .data = "mpu3050" },
+	/* Deprecated vendor ID from the Input driver */
+	{ .compatible = "invn,mpu3050", .data = "mpu3050" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, mpu3050_i2c_of_match);
+
+static struct i2c_driver mpu3050_i2c_driver = {
+	.probe = mpu3050_i2c_probe,
+	.remove = mpu3050_i2c_remove,
+	.id_table = mpu3050_i2c_id,
+	.driver = {
+		.of_match_table = mpu3050_i2c_of_match,
+		.name = "mpu3050-i2c",
+		.pm = &mpu3050_dev_pm_ops,
+	},
+};
+module_i2c_driver(mpu3050_i2c_driver);
+
+MODULE_AUTHOR("Linus Walleij");
+MODULE_DESCRIPTION("Invensense MPU3050 gyroscope driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/gyro/mpu3050.h b/drivers/iio/gyro/mpu3050.h
new file mode 100644
index 000000000000..bef87a714dc5
--- /dev/null
+++ b/drivers/iio/gyro/mpu3050.h
@@ -0,0 +1,96 @@
+#include <linux/iio/iio.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/i2c.h>
+
+/**
+ * enum mpu3050_fullscale - indicates the full range of the sensor in deg/sec
+ */
+enum mpu3050_fullscale {
+	FS_250_DPS = 0,
+	FS_500_DPS,
+	FS_1000_DPS,
+	FS_2000_DPS,
+};
+
+/**
+ * enum mpu3050_lpf - indicates the low pass filter width
+ */
+enum mpu3050_lpf {
+	/* This implicity sets sample frequency to 8 kHz */
+	LPF_256_HZ_NOLPF = 0,
+	/* All others sets the sample frequency to 1 kHz */
+	LPF_188_HZ,
+	LPF_98_HZ,
+	LPF_42_HZ,
+	LPF_20_HZ,
+	LPF_10_HZ,
+	LPF_5_HZ,
+	LPF_2100_HZ_NOLPF,
+};
+
+enum mpu3050_axis {
+	AXIS_X = 0,
+	AXIS_Y,
+	AXIS_Z,
+	AXIS_MAX,
+};
+
+/**
+ * struct mpu3050 - instance state container for the device
+ * @dev: parent device for this instance
+ * @orientation: mounting matrix, flipped axis etc
+ * @map: regmap to reach the registers
+ * @lock: serialization lock to marshal all requests
+ * @irq: the IRQ used for this device
+ * @regs: the regulators to power this device
+ * @fullscale: the current fullscale setting for the device
+ * @lpf: digital low pass filter setting for the device
+ * @divisor: base frequency divider: divides 8 or 1 kHz
+ * @calibration: the three signed 16-bit calibration settings that
+ * get written into the offset registers for each axis to compensate
+ * for DC offsets
+ * @trig: trigger for the MPU-3050 interrupt, if present
+ * @hw_irq_trigger: hardware interrupt trigger is in use
+ * @irq_actl: interrupt is active low
+ * @irq_latch: latched IRQ, this means that it is a level IRQ
+ * @irq_opendrain: the interrupt line shall be configured open drain
+ * @pending_fifo_footer: tells us if there is a pending footer in the FIFO
+ * that we have to read out first when handling the FIFO
+ * @hw_timestamp: latest hardware timestamp from the trigger IRQ, when in
+ * use
+ * @i2cmux: an I2C mux reflecting the fact that this sensor is a hub with
+ * a pass-through I2C interface coming out of it: this device needs to be
+ * powered up in order to reach devices on the other side of this mux
+ */
+struct mpu3050 {
+	struct device *dev;
+	struct iio_mount_matrix orientation;
+	struct regmap *map;
+	struct mutex lock;
+	int irq;
+	struct regulator_bulk_data regs[2];
+	enum mpu3050_fullscale fullscale;
+	enum mpu3050_lpf lpf;
+	u8 divisor;
+	s16 calibration[3];
+	struct iio_trigger *trig;
+	bool hw_irq_trigger;
+	bool irq_actl;
+	bool irq_latch;
+	bool irq_opendrain;
+	bool pending_fifo_footer;
+	s64 hw_timestamp;
+	struct i2c_mux_core *i2cmux;
+};
+
+/* Probe called from different transports */
+int mpu3050_common_probe(struct device *dev,
+			 struct regmap *map,
+			 int irq,
+			 const char *name);
+int mpu3050_common_remove(struct device *dev);
+
+/* PM ops */
+extern const struct dev_pm_ops mpu3050_dev_pm_ops;
diff --git a/drivers/iio/humidity/hts221_buffer.c b/drivers/iio/humidity/hts221_buffer.c
index 76b2e8130b6f..72ddcdac21a2 100644
--- a/drivers/iio/humidity/hts221_buffer.c
+++ b/drivers/iio/humidity/hts221_buffer.c
@@ -15,7 +15,6 @@
 
 #include <linux/iio/iio.h>
 #include <linux/iio/trigger.h>
-#include <linux/interrupt.h>
 #include <linux/iio/events.h>
 #include <linux/iio/trigger_consumer.h>
 #include <linux/iio/triggered_buffer.h>
diff --git a/drivers/iio/humidity/si7020.c b/drivers/iio/humidity/si7020.c
index ffc2ccf6374e..345a7656c5ef 100644
--- a/drivers/iio/humidity/si7020.c
+++ b/drivers/iio/humidity/si7020.c
@@ -154,8 +154,17 @@ static const struct i2c_device_id si7020_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, si7020_id);
 
+static const struct of_device_id si7020_dt_ids[] = {
+	{ .compatible = "silabs,si7020" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, si7020_dt_ids);
+
 static struct i2c_driver si7020_driver = {
-	.driver.name	= "si7020",
+	.driver = {
+		.name = "si7020",
+		.of_match_table = of_match_ptr(si7020_dt_ids),
+	},
 	.probe		= si7020_probe,
 	.id_table	= si7020_id,
 };
diff --git a/drivers/iio/temperature/maxim_thermocouple.c b/drivers/iio/temperature/maxim_thermocouple.c
index 066161a4bccd..f962f31a5eb2 100644
--- a/drivers/iio/temperature/maxim_thermocouple.c
+++ b/drivers/iio/temperature/maxim_thermocouple.c
@@ -136,6 +136,8 @@ static int maxim_thermocouple_read(struct maxim_thermocouple_data *data,
 		ret = spi_read(data->spi, (void *)&buf32, storage_bytes);
 		*val = be32_to_cpu(buf32);
 		break;
+	default:
+		ret = -EINVAL;
 	}
 
 	if (ret)