Merge tag 'iio-for-6.5a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

1st set of IIO new device support, features and cleanup for the 6.5 cycle.

New device support
- honeywell,mprls0025pa
  * New driver and dt-bindings for this series of pressure sensors.
- invensense,mpu6050
  * Add support for ICM 20600 IMU (ID, bindings and device data).
- melexis,mlx90614
  * Add support for mlx90615 Infra Red Thermometer after driver cleanup
    and refactoring to support the differences in this device.
- renesas,x9250
  * New driver and bindings for this quad potentiometer.
- rockchip,saradc
  * Add support for RK3588. Also included is a bunch of refactoring and
    cleanup for that driver.
- rohm,bu27008
  * New driver bindings etc for this 5 photodiode color sensor.
- st,lsm9ds0/st,st-sensors
  * ID added for LSM303D accelerometer and magnetometer including ACPI binding.
- ti,opt4001
  * New driver and bindings for this ambient light sensor.

Features
- core
  * Introduce iio_validate_own_trigger() for cases where a driver can only
    consumer a trigger it registered (detected via same parent device).
    Use it in the kionix,kx022a driver and new rohm,by27008 driver.
- dynaimage,al3320a
  * ACPI binding CALS0001 seen on Lenovo Yoga Table 2 devices.
- kionix,kx002a
  * Enable asynchronous probe.
- rohm,bu27034
  * Enable asynchronous probe.
- ti,tmp006
  * Explicit support for DT including binding documentation.

Cleanups, minor fixes and misc improvements.
- treewide
  * Switch I2C drivers from probe_new() back to probe() - part of the
    long process of getting rid of a parameter from probe()
  * Various whitespace and typo fixes not otherwise called out.
- core
  * industrialio-buffer,Style cleanup.
  * Add documentation to extend_name field of struct iio_chan_spec to
    direct people using it towards the label infrastructure instead.
    extend_name was a design mistake a long time back so directly people
    away from it may be useful.
- adi,ad7606
  * Add HAS_IOPORT dependency to prepare for some Kconfig changes.
- bosch,bma400
  * Drop pointless print of ret in a dev_err_probe() message.
- invensense,icm42600
  * Rework timestamp handling to reduce jitter.
- mediatek,mt7986-auxdac
  * Add DT binding for this part.
- qcom,spmi-vadc
  * Allow for 1/16th prescaling used on a few devices.
  * Various changes to channel labeling and naming, including dropping
    use of fwnode_name which generates odd channel names. Small ABI
    change as a result, but not thought to be a problem for users of this
    platform.
- st,lsm6dsx
  * dt-binding: Use common schema for mount-matrix via a reference.
- st,stm32
  * Add a debug print for when legacy channel config is used.
- ti,palmas-adc
  * Drop unused i2c.h include.

* tag 'iio-for-6.5a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (59 commits)
  dt-bindings: iio: rockchip: Fix 'oneOf' condition failed warning
  dt-bindings: iio: afe: voltage-divider: Spelling s/curcuit/circuit/
  dt-bindings: iio: adc: Add rockchip,rk3588-saradc string
  iio: adc: rockchip_saradc: Use dev_err_probe
  iio: adc: rockchip_saradc: Match alignment with open parenthesis
  iio: adc: rockchip_saradc: Use of_device_get_match_data
  iio: adc: rockchip_saradc: Make use of devm_clk_get_enabled
  iio: adc: rockchip_saradc: Add support for RK3588
  iio: adc: rockchip_saradc: Add callback functions
  iio: temperature: tmp006: Add OF device matching support
  dt-bindings: iio: temperature: Add support for tmp006
  staging: iio: Switch i2c drivers back to use .probe()
  iio: amplifiers: ad8366 Fix whitespace issue
  iio: imu: inv_icm42600: avoid frequent timestamp jitter
  MAINTAINERS: Add ROHM BU27008
  iio: light: ROHM BU27008 color sensor
  iio: kx022a: Use new iio_validate_own_trigger()
  iio: trigger: Add simple trigger_validation helper
  dt-bindings: iio: light: ROHM BU27008
  iio: mlx90614: Add MLX90615 support
  ...

222 files changed, 2921 insertions, 453 deletions

diff --git a/drivers/iio/accel/adxl313_i2c.c b/drivers/iio/accel/adxl313_i2c.c
index 99cc7fc29488..524327ea3663 100644
--- a/drivers/iio/accel/adxl313_i2c.c
+++ b/drivers/iio/accel/adxl313_i2c.c
@@ -85,7 +85,7 @@ static struct i2c_driver adxl313_i2c_driver = {
 		.name	= "adxl313_i2c",
 		.of_match_table = adxl313_of_match,
 	},
-	.probe_new	= adxl313_i2c_probe,
+	.probe		= adxl313_i2c_probe,
 	.id_table	= adxl313_i2c_id,
 };
 
diff --git a/drivers/iio/accel/adxl345_i2c.c b/drivers/iio/accel/adxl345_i2c.c
index 098cd83f95b2..e47d12f19602 100644
--- a/drivers/iio/accel/adxl345_i2c.c
+++ b/drivers/iio/accel/adxl345_i2c.c
@@ -56,7 +56,7 @@ static struct i2c_driver adxl345_i2c_driver = {
 		.of_match_table = adxl345_of_match,
 		.acpi_match_table = adxl345_acpi_match,
 	},
-	.probe_new	= adxl345_i2c_probe,
+	.probe		= adxl345_i2c_probe,
 	.id_table	= adxl345_i2c_id,
 };
 module_i2c_driver(adxl345_i2c_driver);
diff --git a/drivers/iio/accel/adxl355_i2c.c b/drivers/iio/accel/adxl355_i2c.c
index 6cde5ccac06b..d5beea61479d 100644
--- a/drivers/iio/accel/adxl355_i2c.c
+++ b/drivers/iio/accel/adxl355_i2c.c
@@ -68,7 +68,7 @@ static struct i2c_driver adxl355_i2c_driver = {
 		.name	= "adxl355_i2c",
 		.of_match_table = adxl355_of_match,
 	},
-	.probe_new	= adxl355_i2c_probe,
+	.probe		= adxl355_i2c_probe,
 	.id_table	= adxl355_i2c_id,
 };
 module_i2c_driver(adxl355_i2c_driver);
diff --git a/drivers/iio/accel/adxl367_i2c.c b/drivers/iio/accel/adxl367_i2c.c
index 070aad724abd..b595fe94f3a3 100644
--- a/drivers/iio/accel/adxl367_i2c.c
+++ b/drivers/iio/accel/adxl367_i2c.c
@@ -77,7 +77,7 @@ static struct i2c_driver adxl367_i2c_driver = {
 		.name = "adxl367_i2c",
 		.of_match_table = adxl367_of_match,
 	},
-	.probe_new = adxl367_i2c_probe,
+	.probe = adxl367_i2c_probe,
 	.id_table = adxl367_i2c_id,
 };
 
diff --git a/drivers/iio/accel/adxl372_i2c.c b/drivers/iio/accel/adxl372_i2c.c
index e5f310ea65ff..d0690417fd36 100644
--- a/drivers/iio/accel/adxl372_i2c.c
+++ b/drivers/iio/accel/adxl372_i2c.c
@@ -58,7 +58,7 @@ static struct i2c_driver adxl372_i2c_driver = {
 		.name = "adxl372_i2c",
 		.of_match_table = adxl372_of_match,
 	},
-	.probe_new = adxl372_i2c_probe,
+	.probe = adxl372_i2c_probe,
 	.id_table = adxl372_i2c_id,
 };
 
diff --git a/drivers/iio/accel/bma180.c b/drivers/iio/accel/bma180.c
index eb697eeb4301..e8ab0d249351 100644
--- a/drivers/iio/accel/bma180.c
+++ b/drivers/iio/accel/bma180.c
@@ -1134,7 +1134,7 @@ static struct i2c_driver bma180_driver = {
 		.pm	= pm_sleep_ptr(&bma180_pm_ops),
 		.of_match_table = bma180_of_match,
 	},
-	.probe_new	= bma180_probe,
+	.probe		= bma180_probe,
 	.remove		= bma180_remove,
 	.id_table	= bma180_ids,
 };
diff --git a/drivers/iio/accel/bma400_core.c b/drivers/iio/accel/bma400_core.c
index a68b845f5b4f..e90e2f01550a 100644
--- a/drivers/iio/accel/bma400_core.c
+++ b/drivers/iio/accel/bma400_core.c
@@ -868,8 +868,7 @@ static int bma400_init(struct bma400_data *data)
 					     ARRAY_SIZE(regulator_names),
 					     regulator_names);
 	if (ret)
-		return dev_err_probe(data->dev, ret, "Failed to get regulators: %d\n",
-				     ret);
+		return dev_err_probe(data->dev, ret, "Failed to get regulators\n");
 
 	/* Try to read chip_id register. It must return 0x90. */
 	ret = regmap_read(data->regmap, BMA400_CHIP_ID_REG, &val);
diff --git a/drivers/iio/accel/bma400_i2c.c b/drivers/iio/accel/bma400_i2c.c
index 688b06dae669..adf4e3fd2e1d 100644
--- a/drivers/iio/accel/bma400_i2c.c
+++ b/drivers/iio/accel/bma400_i2c.c
@@ -44,7 +44,7 @@ static struct i2c_driver bma400_i2c_driver = {
 		.name = "bma400",
 		.of_match_table = bma400_of_i2c_match,
 	},
-	.probe_new = bma400_i2c_probe,
+	.probe = bma400_i2c_probe,
 	.id_table = bma400_i2c_ids,
 };
 
diff --git a/drivers/iio/accel/bmc150-accel-i2c.c b/drivers/iio/accel/bmc150-accel-i2c.c
index 509cab2bd694..ee1ba134ad42 100644
--- a/drivers/iio/accel/bmc150-accel-i2c.c
+++ b/drivers/iio/accel/bmc150-accel-i2c.c
@@ -269,7 +269,7 @@ static struct i2c_driver bmc150_accel_driver = {
 		.acpi_match_table = ACPI_PTR(bmc150_accel_acpi_match),
 		.pm	= &bmc150_accel_pm_ops,
 	},
-	.probe_new	= bmc150_accel_probe,
+	.probe		= bmc150_accel_probe,
 	.remove		= bmc150_accel_remove,
 	.id_table	= bmc150_accel_id,
 };
diff --git a/drivers/iio/accel/da280.c b/drivers/iio/accel/da280.c
index 38a7d811610e..2f27a5ded94c 100644
--- a/drivers/iio/accel/da280.c
+++ b/drivers/iio/accel/da280.c
@@ -184,7 +184,7 @@ static struct i2c_driver da280_driver = {
 		.acpi_match_table = ACPI_PTR(da280_acpi_match),
 		.pm = pm_sleep_ptr(&da280_pm_ops),
 	},
-	.probe_new	= da280_probe,
+	.probe		= da280_probe,
 	.id_table	= da280_i2c_id,
 };
 
diff --git a/drivers/iio/accel/da311.c b/drivers/iio/accel/da311.c
index 080335fa2ad6..8f919920ced5 100644
--- a/drivers/iio/accel/da311.c
+++ b/drivers/iio/accel/da311.c
@@ -278,7 +278,7 @@ static struct i2c_driver da311_driver = {
 		.name = "da311",
 		.pm = pm_sleep_ptr(&da311_pm_ops),
 	},
-	.probe_new	= da311_probe,
+	.probe		= da311_probe,
 	.id_table	= da311_i2c_id,
 };
 
diff --git a/drivers/iio/accel/dmard06.c b/drivers/iio/accel/dmard06.c
index 7390509aaac0..2e719d60fff8 100644
--- a/drivers/iio/accel/dmard06.c
+++ b/drivers/iio/accel/dmard06.c
@@ -217,7 +217,7 @@ static const struct of_device_id dmard06_of_match[] = {
 MODULE_DEVICE_TABLE(of, dmard06_of_match);
 
 static struct i2c_driver dmard06_driver = {
-	.probe_new = dmard06_probe,
+	.probe = dmard06_probe,
 	.id_table = dmard06_id,
 	.driver = {
 		.name = DMARD06_DRV_NAME,
diff --git a/drivers/iio/accel/dmard09.c b/drivers/iio/accel/dmard09.c
index 4b7a537f617d..fa98623de579 100644
--- a/drivers/iio/accel/dmard09.c
+++ b/drivers/iio/accel/dmard09.c
@@ -135,7 +135,7 @@ static struct i2c_driver dmard09_driver = {
 	.driver = {
 		.name = DMARD09_DRV_NAME
 	},
-	.probe_new = dmard09_probe,
+	.probe = dmard09_probe,
 	.id_table = dmard09_id,
 };
 
diff --git a/drivers/iio/accel/dmard10.c b/drivers/iio/accel/dmard10.c
index 07e68aed8a13..7745b6ffd1ad 100644
--- a/drivers/iio/accel/dmard10.c
+++ b/drivers/iio/accel/dmard10.c
@@ -241,7 +241,7 @@ static struct i2c_driver dmard10_driver = {
 		.name = "dmard10",
 		.pm = pm_sleep_ptr(&dmard10_pm_ops),
 	},
-	.probe_new	= dmard10_probe,
+	.probe		= dmard10_probe,
 	.id_table	= dmard10_i2c_id,
 };
 
diff --git a/drivers/iio/accel/fxls8962af-i2c.c b/drivers/iio/accel/fxls8962af-i2c.c
index 22640eaebac7..160124673308 100644
--- a/drivers/iio/accel/fxls8962af-i2c.c
+++ b/drivers/iio/accel/fxls8962af-i2c.c
@@ -47,7 +47,7 @@ static struct i2c_driver fxls8962af_driver = {
 		   .of_match_table = fxls8962af_of_match,
 		   .pm = pm_ptr(&fxls8962af_pm_ops),
 		   },
-	.probe_new = fxls8962af_probe,
+	.probe = fxls8962af_probe,
 	.id_table = fxls8962af_id,
 };
 module_i2c_driver(fxls8962af_driver);
diff --git a/drivers/iio/accel/kionix-kx022a-i2c.c b/drivers/iio/accel/kionix-kx022a-i2c.c
index e6fd02d931b6..b0ac78e85dad 100644
--- a/drivers/iio/accel/kionix-kx022a-i2c.c
+++ b/drivers/iio/accel/kionix-kx022a-i2c.c
@@ -40,8 +40,9 @@ static struct i2c_driver kx022a_i2c_driver = {
 	.driver = {
 		.name  = "kx022a-i2c",
 		.of_match_table = kx022a_of_match,
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
 	  },
-	.probe_new    = kx022a_i2c_probe,
+	.probe        = kx022a_i2c_probe,
 };
 module_i2c_driver(kx022a_i2c_driver);
 
diff --git a/drivers/iio/accel/kionix-kx022a-spi.c b/drivers/iio/accel/kionix-kx022a-spi.c
index 9cd047f7b346..f45a46899a5f 100644
--- a/drivers/iio/accel/kionix-kx022a-spi.c
+++ b/drivers/iio/accel/kionix-kx022a-spi.c
@@ -46,6 +46,7 @@ static struct spi_driver kx022a_spi_driver = {
 	.driver = {
 		.name   = "kx022a-spi",
 		.of_match_table = kx022a_of_match,
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
 	},
 	.probe = kx022a_spi_probe,
 	.id_table = kx022a_id,
diff --git a/drivers/iio/accel/kionix-kx022a.c b/drivers/iio/accel/kionix-kx022a.c
index b8636fa8eaeb..4ea3c6718ed4 100644
--- a/drivers/iio/accel/kionix-kx022a.c
+++ b/drivers/iio/accel/kionix-kx022a.c
@@ -516,17 +516,6 @@ static int kx022a_read_raw(struct iio_dev *idev,
 	return -EINVAL;
 };
 
-static int kx022a_validate_trigger(struct iio_dev *idev,
-				   struct iio_trigger *trig)
-{
-	struct kx022a_data *data = iio_priv(idev);
-
-	if (data->trig != trig)
-		return -EINVAL;
-
-	return 0;
-}
-
 static int kx022a_set_watermark(struct iio_dev *idev, unsigned int val)
 {
 	struct kx022a_data *data = iio_priv(idev);
@@ -725,7 +714,7 @@ static const struct iio_info kx022a_info = {
 	.write_raw = &kx022a_write_raw,
 	.read_avail = &kx022a_read_avail,
 
-	.validate_trigger	= kx022a_validate_trigger,
+	.validate_trigger	= iio_validate_own_trigger,
 	.hwfifo_set_watermark	= kx022a_set_watermark,
 	.hwfifo_flush_to_buffer	= kx022a_fifo_flush,
 };
diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c
index 98da4bda22df..894709286b0c 100644
--- a/drivers/iio/accel/kxcjk-1013.c
+++ b/drivers/iio/accel/kxcjk-1013.c
@@ -1732,7 +1732,7 @@ static struct i2c_driver kxcjk1013_driver = {
 		.of_match_table = kxcjk1013_of_match,
 		.pm	= &kxcjk1013_pm_ops,
 	},
-	.probe_new	= kxcjk1013_probe,
+	.probe		= kxcjk1013_probe,
 	.remove		= kxcjk1013_remove,
 	.id_table	= kxcjk1013_id,
 };
diff --git a/drivers/iio/accel/kxsd9-i2c.c b/drivers/iio/accel/kxsd9-i2c.c
index 6b3683ddce36..3bc9ee1f9db3 100644
--- a/drivers/iio/accel/kxsd9-i2c.c
+++ b/drivers/iio/accel/kxsd9-i2c.c
@@ -54,7 +54,7 @@ static struct i2c_driver kxsd9_i2c_driver = {
 		.of_match_table = kxsd9_of_match,
 		.pm = pm_ptr(&kxsd9_dev_pm_ops),
 	},
-	.probe_new	= kxsd9_i2c_probe,
+	.probe		= kxsd9_i2c_probe,
 	.remove		= kxsd9_i2c_remove,
 	.id_table	= kxsd9_i2c_id,
 };
diff --git a/drivers/iio/accel/mc3230.c b/drivers/iio/accel/mc3230.c
index efc21871de42..6b87c2c9945c 100644
--- a/drivers/iio/accel/mc3230.c
+++ b/drivers/iio/accel/mc3230.c
@@ -190,7 +190,7 @@ static struct i2c_driver mc3230_driver = {
 		.name = "mc3230",
 		.pm = pm_sleep_ptr(&mc3230_pm_ops),
 	},
-	.probe_new	= mc3230_probe,
+	.probe		= mc3230_probe,
 	.remove		= mc3230_remove,
 	.id_table	= mc3230_i2c_id,
 };
diff --git a/drivers/iio/accel/mma7455_i2c.c b/drivers/iio/accel/mma7455_i2c.c
index a3864dbe2761..14f7850a22f0 100644
--- a/drivers/iio/accel/mma7455_i2c.c
+++ b/drivers/iio/accel/mma7455_i2c.c
@@ -46,7 +46,7 @@ static const struct of_device_id mma7455_of_match[] = {
 MODULE_DEVICE_TABLE(of, mma7455_of_match);
 
 static struct i2c_driver mma7455_i2c_driver = {
-	.probe_new = mma7455_i2c_probe,
+	.probe = mma7455_i2c_probe,
 	.remove = mma7455_i2c_remove,
 	.id_table = mma7455_i2c_ids,
 	.driver = {
diff --git a/drivers/iio/accel/mma7660.c b/drivers/iio/accel/mma7660.c
index b279ca4dcdc0..260cbceaa151 100644
--- a/drivers/iio/accel/mma7660.c
+++ b/drivers/iio/accel/mma7660.c
@@ -266,7 +266,7 @@ static struct i2c_driver mma7660_driver = {
 		.of_match_table = mma7660_of_match,
 		.acpi_match_table = mma7660_acpi_id,
 	},
-	.probe_new	= mma7660_probe,
+	.probe		= mma7660_probe,
 	.remove		= mma7660_remove,
 	.id_table	= mma7660_i2c_id,
 };
diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
index ea14e3aaa30a..6e7399e72221 100644
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -1846,7 +1846,7 @@ static struct i2c_driver mma8452_driver = {
 		.of_match_table = mma8452_dt_ids,
 		.pm	= &mma8452_pm_ops,
 	},
-	.probe_new = mma8452_probe,
+	.probe = mma8452_probe,
 	.remove = mma8452_remove,
 	.id_table = mma8452_id,
 };
diff --git a/drivers/iio/accel/mma9551.c b/drivers/iio/accel/mma9551.c
index aa4f5842859e..d823f2edc6d4 100644
--- a/drivers/iio/accel/mma9551.c
+++ b/drivers/iio/accel/mma9551.c
@@ -607,7 +607,7 @@ static struct i2c_driver mma9551_driver = {
 		   .acpi_match_table = ACPI_PTR(mma9551_acpi_match),
 		   .pm = pm_ptr(&mma9551_pm_ops),
 		   },
-	.probe_new = mma9551_probe,
+	.probe = mma9551_probe,
 	.remove = mma9551_remove,
 	.id_table = mma9551_id,
 };
diff --git a/drivers/iio/accel/mma9553.c b/drivers/iio/accel/mma9553.c
index 0af578ef9d3d..d01aba4aecba 100644
--- a/drivers/iio/accel/mma9553.c
+++ b/drivers/iio/accel/mma9553.c
@@ -1246,7 +1246,7 @@ static struct i2c_driver mma9553_driver = {
 		   .acpi_match_table = ACPI_PTR(mma9553_acpi_match),
 		   .pm = pm_ptr(&mma9553_pm_ops),
 		   },
-	.probe_new = mma9553_probe,
+	.probe = mma9553_probe,
 	.remove = mma9553_remove,
 	.id_table = mma9553_id,
 };
diff --git a/drivers/iio/accel/msa311.c b/drivers/iio/accel/msa311.c
index 6690fa37da8f..6ddcc3c2f840 100644
--- a/drivers/iio/accel/msa311.c
+++ b/drivers/iio/accel/msa311.c
@@ -1294,7 +1294,7 @@ static struct i2c_driver msa311_driver = {
 		.of_match_table = msa311_of_match,
 		.pm = pm_ptr(&msa311_pm_ops),
 	},
-	.probe_new	= msa311_probe,
+	.probe		= msa311_probe,
 	.id_table	= msa311_i2c_id,
 };
 module_i2c_driver(msa311_driver);
diff --git a/drivers/iio/accel/mxc4005.c b/drivers/iio/accel/mxc4005.c
index b146fc82738f..75d142bc14b4 100644
--- a/drivers/iio/accel/mxc4005.c
+++ b/drivers/iio/accel/mxc4005.c
@@ -488,7 +488,7 @@ static struct i2c_driver mxc4005_driver = {
 		.name = MXC4005_DRV_NAME,
 		.acpi_match_table = ACPI_PTR(mxc4005_acpi_match),
 	},
-	.probe_new	= mxc4005_probe,
+	.probe		= mxc4005_probe,
 	.id_table	= mxc4005_id,
 };
 
diff --git a/drivers/iio/accel/mxc6255.c b/drivers/iio/accel/mxc6255.c
index aa2e660545f8..33c2253561e6 100644
--- a/drivers/iio/accel/mxc6255.c
+++ b/drivers/iio/accel/mxc6255.c
@@ -183,7 +183,7 @@ static struct i2c_driver mxc6255_driver = {
 		.name = MXC6255_DRV_NAME,
 		.acpi_match_table = ACPI_PTR(mxc6255_acpi_match),
 	},
-	.probe_new	= mxc6255_probe,
+	.probe		= mxc6255_probe,
 	.id_table	= mxc6255_id,
 };
 
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index 282e539157f8..d2104e14e255 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -1007,6 +1007,7 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
 		.sensors_supported = {
 			[0] = LSM9DS0_IMU_DEV_NAME,
+			[1] = LSM303D_IMU_DEV_NAME,
 		},
 		.ch = (struct iio_chan_spec *)st_accel_16bit_channels,
 		.odr = {
diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c
index fb9e2d6f4210..71ee861b2980 100644
--- a/drivers/iio/accel/st_accel_i2c.c
+++ b/drivers/iio/accel/st_accel_i2c.c
@@ -206,7 +206,7 @@ static struct i2c_driver st_accel_driver = {
 		.of_match_table = st_accel_of_match,
 		.acpi_match_table = ACPI_PTR(st_accel_acpi_match),
 	},
-	.probe_new = st_accel_i2c_probe,
+	.probe = st_accel_i2c_probe,
 	.id_table = st_accel_id_table,
 };
 module_i2c_driver(st_accel_driver);
diff --git a/drivers/iio/accel/stk8312.c b/drivers/iio/accel/stk8312.c
index 68f680db7505..ef0ae7672253 100644
--- a/drivers/iio/accel/stk8312.c
+++ b/drivers/iio/accel/stk8312.c
@@ -644,7 +644,7 @@ static struct i2c_driver stk8312_driver = {
 		.name = STK8312_DRIVER_NAME,
 		.pm = pm_sleep_ptr(&stk8312_pm_ops),
 	},
-	.probe_new =        stk8312_probe,
+	.probe =        stk8312_probe,
 	.remove =           stk8312_remove,
 	.id_table =         stk8312_i2c_id,
 };
diff --git a/drivers/iio/accel/stk8ba50.c b/drivers/iio/accel/stk8ba50.c
index 44f6e0fbdfcc..3415ac1b4495 100644
--- a/drivers/iio/accel/stk8ba50.c
+++ b/drivers/iio/accel/stk8ba50.c
@@ -543,7 +543,7 @@ static struct i2c_driver stk8ba50_driver = {
 		.pm = pm_sleep_ptr(&stk8ba50_pm_ops),
 		.acpi_match_table = ACPI_PTR(stk8ba50_acpi_id),
 	},
-	.probe_new =        stk8ba50_probe,
+	.probe =        stk8ba50_probe,
 	.remove =           stk8ba50_remove,
 	.id_table =         stk8ba50_i2c_id,
 };
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index eb2b09ef5d5b..53098aca06ea 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -145,7 +145,7 @@ config AD7606
 
 config AD7606_IFACE_PARALLEL
 	tristate "Analog Devices AD7606 ADC driver with parallel interface support"
-	depends on HAS_IOMEM
+	depends on HAS_IOPORT
 	select AD7606
 	help
 	  Say yes here to build parallel interface support for Analog Devices:
diff --git a/drivers/iio/adc/ad7091r5.c b/drivers/iio/adc/ad7091r5.c
index 7d6709da1005..2f048527b7b7 100644
--- a/drivers/iio/adc/ad7091r5.c
+++ b/drivers/iio/adc/ad7091r5.c
@@ -103,7 +103,7 @@ static struct i2c_driver ad7091r5_driver = {
 		.name = "ad7091r5",
 		.of_match_table = ad7091r5_dt_ids,
 	},
-	.probe_new = ad7091r5_i2c_probe,
+	.probe = ad7091r5_i2c_probe,
 	.id_table = ad7091r5_i2c_ids,
 };
 module_i2c_driver(ad7091r5_driver);
diff --git a/drivers/iio/adc/ad7291.c b/drivers/iio/adc/ad7291.c
index f9ee189925de..14d02b085d3b 100644
--- a/drivers/iio/adc/ad7291.c
+++ b/drivers/iio/adc/ad7291.c
@@ -553,7 +553,7 @@ static struct i2c_driver ad7291_driver = {
 		.name = KBUILD_MODNAME,
 		.of_match_table = ad7291_of_match,
 	},
-	.probe_new = ad7291_probe,
+	.probe = ad7291_probe,
 	.id_table = ad7291_id,
 };
 module_i2c_driver(ad7291_driver);
diff --git a/drivers/iio/adc/ad799x.c b/drivers/iio/adc/ad799x.c
index 8f0a3a35e727..b757cc45c4de 100644
--- a/drivers/iio/adc/ad799x.c
+++ b/drivers/iio/adc/ad799x.c
@@ -968,7 +968,7 @@ static struct i2c_driver ad799x_driver = {
 		.name = "ad799x",
 		.pm = pm_sleep_ptr(&ad799x_pm_ops),
 	},
-	.probe_new = ad799x_probe,
+	.probe = ad799x_probe,
 	.remove = ad799x_remove,
 	.id_table = ad799x_id,
 };
diff --git a/drivers/iio/adc/ina2xx-adc.c b/drivers/iio/adc/ina2xx-adc.c
index 38d9d7b2313e..213526c1592f 100644
--- a/drivers/iio/adc/ina2xx-adc.c
+++ b/drivers/iio/adc/ina2xx-adc.c
@@ -1090,7 +1090,7 @@ static struct i2c_driver ina2xx_driver = {
 		   .name = KBUILD_MODNAME,
 		   .of_match_table = ina2xx_of_match,
 	},
-	.probe_new = ina2xx_probe,
+	.probe = ina2xx_probe,
 	.remove = ina2xx_remove,
 	.id_table = ina2xx_id,
 };
diff --git a/drivers/iio/adc/ltc2471.c b/drivers/iio/adc/ltc2471.c
index eeb2945829eb..97c417c3a4eb 100644
--- a/drivers/iio/adc/ltc2471.c
+++ b/drivers/iio/adc/ltc2471.c
@@ -146,7 +146,7 @@ static struct i2c_driver ltc2471_i2c_driver = {
 	.driver = {
 		.name = "ltc2471",
 	},
-	.probe_new = ltc2471_i2c_probe,
+	.probe = ltc2471_i2c_probe,
 	.id_table = ltc2471_i2c_id,
 };
 
diff --git a/drivers/iio/adc/ltc2485.c b/drivers/iio/adc/ltc2485.c
index 6a23427344ec..859e4314cfa2 100644
--- a/drivers/iio/adc/ltc2485.c
+++ b/drivers/iio/adc/ltc2485.c
@@ -133,7 +133,7 @@ static struct i2c_driver ltc2485_driver = {
 	.driver = {
 		.name = "ltc2485",
 	},
-	.probe_new = ltc2485_probe,
+	.probe = ltc2485_probe,
 	.id_table = ltc2485_id,
 };
 module_i2c_driver(ltc2485_driver);
diff --git a/drivers/iio/adc/ltc2497.c b/drivers/iio/adc/ltc2497.c
index ec198c6f13d6..5bdd40729611 100644
--- a/drivers/iio/adc/ltc2497.c
+++ b/drivers/iio/adc/ltc2497.c
@@ -163,7 +163,7 @@ static struct i2c_driver ltc2497_driver = {
 		.name = "ltc2497",
 		.of_match_table = ltc2497_of_match,
 	},
-	.probe_new = ltc2497_probe,
+	.probe = ltc2497_probe,
 	.remove = ltc2497_remove,
 	.id_table = ltc2497_id,
 };
diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c
index 73b783b430d7..b31581616ce3 100644
--- a/drivers/iio/adc/max1363.c
+++ b/drivers/iio/adc/max1363.c
@@ -1718,7 +1718,7 @@ static struct i2c_driver max1363_driver = {
 		.name = "max1363",
 		.of_match_table = max1363_of_match,
 	},
-	.probe_new = max1363_probe,
+	.probe = max1363_probe,
 	.id_table = max1363_id,
 };
 module_i2c_driver(max1363_driver);
diff --git a/drivers/iio/adc/max9611.c b/drivers/iio/adc/max9611.c
index cb7f4785423a..76e517b7b1e4 100644
--- a/drivers/iio/adc/max9611.c
+++ b/drivers/iio/adc/max9611.c
@@ -556,7 +556,7 @@ static struct i2c_driver max9611_driver = {
 		   .name = DRIVER_NAME,
 		   .of_match_table = max9611_of_table,
 	},
-	.probe_new = max9611_probe,
+	.probe = max9611_probe,
 };
 module_i2c_driver(max9611_driver);
 
diff --git a/drivers/iio/adc/mcp3422.c b/drivers/iio/adc/mcp3422.c
index ada844c3f7ec..0778a8fb6866 100644
--- a/drivers/iio/adc/mcp3422.c
+++ b/drivers/iio/adc/mcp3422.c
@@ -417,7 +417,7 @@ static struct i2c_driver mcp3422_driver = {
 		.name = "mcp3422",
 		.of_match_table = mcp3422_of_match,
 	},
-	.probe_new = mcp3422_probe,
+	.probe = mcp3422_probe,
 	.id_table = mcp3422_id,
 };
 module_i2c_driver(mcp3422_driver);
diff --git a/drivers/iio/adc/nau7802.c b/drivers/iio/adc/nau7802.c
index c1261ecd400c..d9e1696df7ae 100644
--- a/drivers/iio/adc/nau7802.c
+++ b/drivers/iio/adc/nau7802.c
@@ -544,7 +544,7 @@ static const struct of_device_id nau7802_dt_ids[] = {
 MODULE_DEVICE_TABLE(of, nau7802_dt_ids);
 
 static struct i2c_driver nau7802_driver = {
-	.probe_new = nau7802_probe,
+	.probe = nau7802_probe,
 	.id_table = nau7802_i2c_id,
 	.driver = {
 		   .name = "nau7802",
diff --git a/drivers/iio/adc/palmas_gpadc.c b/drivers/iio/adc/palmas_gpadc.c
index 7dfc9c927a23..27b2632c1037 100644
--- a/drivers/iio/adc/palmas_gpadc.c
+++ b/drivers/iio/adc/palmas_gpadc.c
@@ -14,7 +14,6 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
-#include <linux/i2c.h>
 #include <linux/pm.h>
 #include <linux/mfd/palmas.h>
 #include <linux/completion.h>
diff --git a/drivers/iio/adc/qcom-spmi-adc5.c b/drivers/iio/adc/qcom-spmi-adc5.c
index c2d5e06f137a..0a4fd3a46113 100644
--- a/drivers/iio/adc/qcom-spmi-adc5.c
+++ b/drivers/iio/adc/qcom-spmi-adc5.c
@@ -114,7 +114,7 @@ enum adc5_cal_val {
  *	that is an average of multiple measurements.
  * @scale_fn_type: Represents the scaling function to convert voltage
  *	physical units desired by the client for the channel.
- * @datasheet_name: Channel name used in device tree.
+ * @channel_name: Channel name used in device tree.
  */
 struct adc5_channel_prop {
 	unsigned int		channel;
@@ -126,7 +126,7 @@ struct adc5_channel_prop {
 	unsigned int		hw_settle_time;
 	unsigned int		avg_samples;
 	enum vadc_scale_fn_type	scale_fn_type;
-	const char		*datasheet_name;
+	const char		*channel_name;
 };
 
 /**
@@ -657,8 +657,7 @@ static int adc5_get_fw_channel_data(struct adc5_chip *adc,
 		chan = chan & ADC_CHANNEL_MASK;
 	}
 
-	if (chan > ADC5_PARALLEL_ISENSE_VBAT_IDATA ||
-	    !data->adc_chans[chan].datasheet_name) {
+	if (chan > ADC5_PARALLEL_ISENSE_VBAT_IDATA) {
 		dev_err(dev, "%s invalid channel number %d\n", name, chan);
 		return -EINVAL;
 	}
@@ -669,9 +668,9 @@ static int adc5_get_fw_channel_data(struct adc5_chip *adc,
 
 	ret = fwnode_property_read_string(fwnode, "label", &channel_name);
 	if (ret)
-		channel_name = name;
+		channel_name = data->adc_chans[chan].datasheet_name;
 
-	prop->datasheet_name = channel_name;
+	prop->channel_name = channel_name;
 
 	ret = fwnode_property_read_u32(fwnode, "qcom,decimation", &value);
 	if (!ret) {
@@ -861,8 +860,8 @@ static int adc5_get_fw_data(struct adc5_chip *adc)
 		adc_chan = &adc->data->adc_chans[prop.channel];
 
 		iio_chan->channel = prop.channel;
-		iio_chan->datasheet_name = prop.datasheet_name;
-		iio_chan->extend_name = prop.datasheet_name;
+		iio_chan->datasheet_name = adc_chan->datasheet_name;
+		iio_chan->extend_name = prop.channel_name;
 		iio_chan->info_mask_separate = adc_chan->info_mask;
 		iio_chan->type = adc_chan->type;
 		iio_chan->address = index;
diff --git a/drivers/iio/adc/qcom-spmi-vadc.c b/drivers/iio/adc/qcom-spmi-vadc.c
index bcff0f62b70e..f5c6f1f27b2c 100644
--- a/drivers/iio/adc/qcom-spmi-vadc.c
+++ b/drivers/iio/adc/qcom-spmi-vadc.c
@@ -84,6 +84,7 @@
  *	that is an average of multiple measurements.
  * @scale_fn_type: Represents the scaling function to convert voltage
  *	physical units desired by the client for the channel.
+ * @channel_name: Channel name used in device tree.
  */
 struct vadc_channel_prop {
 	unsigned int channel;
@@ -93,6 +94,7 @@ struct vadc_channel_prop {
 	unsigned int hw_settle_time;
 	unsigned int avg_samples;
 	enum vadc_scale_fn_type scale_fn_type;
+	const char *channel_name;
 };
 
 /**
@@ -495,8 +497,18 @@ static int vadc_fwnode_xlate(struct iio_dev *indio_dev,
 	return -EINVAL;
 }
 
+static int vadc_read_label(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan, char *label)
+{
+	struct vadc_priv *vadc = iio_priv(indio_dev);
+	const char *name = vadc->chan_props[chan->address].channel_name;
+
+	return sysfs_emit(label, "%s\n", name);
+}
+
 static const struct iio_info vadc_info = {
 	.read_raw = vadc_read_raw,
+	.read_label = vadc_read_label,
 	.fwnode_xlate = vadc_fwnode_xlate,
 };
 
@@ -652,7 +664,7 @@ static int vadc_get_fw_channel_data(struct device *dev,
 				    struct vadc_channel_prop *prop,
 				    struct fwnode_handle *fwnode)
 {
-	const char *name = fwnode_get_name(fwnode);
+	const char *name = fwnode_get_name(fwnode), *label;
 	u32 chan, value, varr[2];
 	int ret;
 
@@ -667,6 +679,11 @@ static int vadc_get_fw_channel_data(struct device *dev,
 		return -EINVAL;
 	}
 
+	ret = fwnode_property_read_string(fwnode, "label", &label);
+	if (ret)
+		label = vadc_chans[chan].datasheet_name;
+	prop->channel_name = label;
+
 	/* the channel has DT description */
 	prop->channel = chan;
 
diff --git a/drivers/iio/adc/rockchip_saradc.c b/drivers/iio/adc/rockchip_saradc.c
index 79448c5ffc2a..4b011f7eddec 100644
--- a/drivers/iio/adc/rockchip_saradc.c
+++ b/drivers/iio/adc/rockchip_saradc.c
@@ -4,6 +4,7 @@
  * Copyright (C) 2014 ROCKCHIP, Inc.
  */
 
+#include <linux/bitfield.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/platform_device.h>
@@ -38,10 +39,31 @@
 #define SARADC_TIMEOUT			msecs_to_jiffies(100)
 #define SARADC_MAX_CHANNELS		8
 
+/* v2 registers */
+#define SARADC2_CONV_CON		0x000
+#define SARADC_T_PD_SOC			0x004
+#define SARADC_T_DAS_SOC		0x00c
+#define SARADC2_END_INT_EN		0x104
+#define SARADC2_ST_CON			0x108
+#define SARADC2_STATUS			0x10c
+#define SARADC2_END_INT_ST		0x110
+#define SARADC2_DATA_BASE		0x120
+
+#define SARADC2_EN_END_INT		BIT(0)
+#define SARADC2_START			BIT(4)
+#define SARADC2_SINGLE_MODE		BIT(5)
+
+#define SARADC2_CONV_CHANNELS GENMASK(15, 0)
+
+struct rockchip_saradc;
+
 struct rockchip_saradc_data {
 	const struct iio_chan_spec	*channels;
 	int				num_channels;
 	unsigned long			clk_rate;
+	void (*start)(struct rockchip_saradc *info, int chn);
+	int (*read)(struct rockchip_saradc *info);
+	void (*power_down)(struct rockchip_saradc *info);
 };
 
 struct rockchip_saradc {
@@ -60,27 +82,81 @@ struct rockchip_saradc {
 	struct notifier_block nb;
 };
 
-static void rockchip_saradc_power_down(struct rockchip_saradc *info)
+static void rockchip_saradc_reset_controller(struct reset_control *reset);
+
+static void rockchip_saradc_start_v1(struct rockchip_saradc *info, int chn)
+{
+	/* 8 clock periods as delay between power up and start cmd */
+	writel_relaxed(8, info->regs + SARADC_DLY_PU_SOC);
+	/* Select the channel to be used and trigger conversion */
+	writel(SARADC_CTRL_POWER_CTRL | (chn & SARADC_CTRL_CHN_MASK) |
+	       SARADC_CTRL_IRQ_ENABLE, info->regs + SARADC_CTRL);
+}
+
+static void rockchip_saradc_start_v2(struct rockchip_saradc *info, int chn)
+{
+	int val;
+
+	if (info->reset)
+		rockchip_saradc_reset_controller(info->reset);
+
+	writel_relaxed(0xc, info->regs + SARADC_T_DAS_SOC);
+	writel_relaxed(0x20, info->regs + SARADC_T_PD_SOC);
+	val = FIELD_PREP(SARADC2_EN_END_INT, 1);
+	val |= val << 16;
+	writel_relaxed(val, info->regs + SARADC2_END_INT_EN);
+	val = FIELD_PREP(SARADC2_START, 1) |
+	      FIELD_PREP(SARADC2_SINGLE_MODE, 1) |
+	      FIELD_PREP(SARADC2_CONV_CHANNELS, chn);
+	val |= val << 16;
+	writel(val, info->regs + SARADC2_CONV_CON);
+}
+
+static void rockchip_saradc_start(struct rockchip_saradc *info, int chn)
+{
+	info->data->start(info, chn);
+}
+
+static int rockchip_saradc_read_v1(struct rockchip_saradc *info)
+{
+	return readl_relaxed(info->regs + SARADC_DATA);
+}
+
+static int rockchip_saradc_read_v2(struct rockchip_saradc *info)
+{
+	int offset;
+
+	/* Clear irq */
+	writel_relaxed(0x1, info->regs + SARADC2_END_INT_ST);
+
+	offset = SARADC2_DATA_BASE + info->last_chan->channel * 0x4;
+
+	return readl_relaxed(info->regs + offset);
+}
+
+static int rockchip_saradc_read(struct rockchip_saradc *info)
+{
+	return info->data->read(info);
+}
+
+static void rockchip_saradc_power_down_v1(struct rockchip_saradc *info)
 {
-	/* Clear irq & power down adc */
 	writel_relaxed(0, info->regs + SARADC_CTRL);
 }
 
+static void rockchip_saradc_power_down(struct rockchip_saradc *info)
+{
+	if (info->data->power_down)
+		info->data->power_down(info);
+}
+
 static int rockchip_saradc_conversion(struct rockchip_saradc *info,
-				   struct iio_chan_spec const *chan)
+				      struct iio_chan_spec const *chan)
 {
 	reinit_completion(&info->completion);
 
-	/* 8 clock periods as delay between power up and start cmd */
-	writel_relaxed(8, info->regs + SARADC_DLY_PU_SOC);
-
 	info->last_chan = chan;
-
-	/* Select the channel to be used and trigger conversion */
-	writel(SARADC_CTRL_POWER_CTRL
-			| (chan->channel & SARADC_CTRL_CHN_MASK)
-			| SARADC_CTRL_IRQ_ENABLE,
-		   info->regs + SARADC_CTRL);
+	rockchip_saradc_start(info, chan->channel);
 
 	if (!wait_for_completion_timeout(&info->completion, SARADC_TIMEOUT))
 		return -ETIMEDOUT;
@@ -123,7 +199,7 @@ static irqreturn_t rockchip_saradc_isr(int irq, void *dev_id)
 	struct rockchip_saradc *info = dev_id;
 
 	/* Read value */
-	info->last_val = readl_relaxed(info->regs + SARADC_DATA);
+	info->last_val = rockchip_saradc_read(info);
 	info->last_val &= GENMASK(info->last_chan->scan_type.realbits - 1, 0);
 
 	rockchip_saradc_power_down(info);
@@ -163,6 +239,9 @@ static const struct rockchip_saradc_data saradc_data = {
 	.channels = rockchip_saradc_iio_channels,
 	.num_channels = ARRAY_SIZE(rockchip_saradc_iio_channels),
 	.clk_rate = 1000000,
+	.start = rockchip_saradc_start_v1,
+	.read = rockchip_saradc_read_v1,
+	.power_down = rockchip_saradc_power_down_v1,
 };
 
 static const struct iio_chan_spec rockchip_rk3066_tsadc_iio_channels[] = {
@@ -174,6 +253,9 @@ static const struct rockchip_saradc_data rk3066_tsadc_data = {
 	.channels = rockchip_rk3066_tsadc_iio_channels,
 	.num_channels = ARRAY_SIZE(rockchip_rk3066_tsadc_iio_channels),
 	.clk_rate = 50000,
+	.start = rockchip_saradc_start_v1,
+	.read = rockchip_saradc_read_v1,
+	.power_down = rockchip_saradc_power_down_v1,
 };
 
 static const struct iio_chan_spec rockchip_rk3399_saradc_iio_channels[] = {
@@ -189,6 +271,9 @@ static const struct rockchip_saradc_data rk3399_saradc_data = {
 	.channels = rockchip_rk3399_saradc_iio_channels,
 	.num_channels = ARRAY_SIZE(rockchip_rk3399_saradc_iio_channels),
 	.clk_rate = 1000000,
+	.start = rockchip_saradc_start_v1,
+	.read = rockchip_saradc_read_v1,
+	.power_down = rockchip_saradc_power_down_v1,
 };
 
 static const struct iio_chan_spec rockchip_rk3568_saradc_iio_channels[] = {
@@ -206,6 +291,28 @@ static const struct rockchip_saradc_data rk3568_saradc_data = {
 	.channels = rockchip_rk3568_saradc_iio_channels,
 	.num_channels = ARRAY_SIZE(rockchip_rk3568_saradc_iio_channels),
 	.clk_rate = 1000000,
+	.start = rockchip_saradc_start_v1,
+	.read = rockchip_saradc_read_v1,
+	.power_down = rockchip_saradc_power_down_v1,
+};
+
+static const struct iio_chan_spec rockchip_rk3588_saradc_iio_channels[] = {
+	SARADC_CHANNEL(0, "adc0", 12),
+	SARADC_CHANNEL(1, "adc1", 12),
+	SARADC_CHANNEL(2, "adc2", 12),
+	SARADC_CHANNEL(3, "adc3", 12),
+	SARADC_CHANNEL(4, "adc4", 12),
+	SARADC_CHANNEL(5, "adc5", 12),
+	SARADC_CHANNEL(6, "adc6", 12),
+	SARADC_CHANNEL(7, "adc7", 12),
+};
+
+static const struct rockchip_saradc_data rk3588_saradc_data = {
+	.channels = rockchip_rk3588_saradc_iio_channels,
+	.num_channels = ARRAY_SIZE(rockchip_rk3588_saradc_iio_channels),
+	.clk_rate = 1000000,
+	.start = rockchip_saradc_start_v2,
+	.read = rockchip_saradc_read_v2,
 };
 
 static const struct of_device_id rockchip_saradc_match[] = {
@@ -221,6 +328,9 @@ static const struct of_device_id rockchip_saradc_match[] = {
 	}, {
 		.compatible = "rockchip,rk3568-saradc",
 		.data = &rk3568_saradc_data,
+	}, {
+		.compatible = "rockchip,rk3588-saradc",
+		.data = &rk3588_saradc_data,
 	},
 	{},
 };
@@ -236,20 +346,6 @@ static void rockchip_saradc_reset_controller(struct reset_control *reset)
 	reset_control_deassert(reset);
 }
 
-static void rockchip_saradc_clk_disable(void *data)
-{
-	struct rockchip_saradc *info = data;
-
-	clk_disable_unprepare(info->clk);
-}
-
-static void rockchip_saradc_pclk_disable(void *data)
-{
-	struct rockchip_saradc *info = data;
-
-	clk_disable_unprepare(info->pclk);
-}
-
 static void rockchip_saradc_regulator_disable(void *data)
 {
 	struct rockchip_saradc *info = data;
@@ -298,8 +394,7 @@ out:
 }
 
 static int rockchip_saradc_volt_notify(struct notifier_block *nb,
-						   unsigned long event,
-						   void *data)
+				       unsigned long event, void *data)
 {
 	struct rockchip_saradc *info =
 			container_of(nb, struct rockchip_saradc, nb);
@@ -319,10 +414,10 @@ static void rockchip_saradc_regulator_unreg_notifier(void *data)
 
 static int rockchip_saradc_probe(struct platform_device *pdev)
 {
+	const struct rockchip_saradc_data *match_data;
 	struct rockchip_saradc *info = NULL;
 	struct device_node *np = pdev->dev.of_node;
 	struct iio_dev *indio_dev = NULL;
-	const struct of_device_id *match;
 	int ret;
 	int irq;
 
@@ -330,25 +425,23 @@ static int rockchip_saradc_probe(struct platform_device *pdev)
 		return -ENODEV;
 
 	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
-	if (!indio_dev) {
-		dev_err(&pdev->dev, "failed allocating iio device\n");
-		return -ENOMEM;
-	}
+	if (!indio_dev)
+		return dev_err_probe(&pdev->dev, -ENOMEM,
+				     "failed allocating iio device\n");
+
 	info = iio_priv(indio_dev);
 
-	match = of_match_device(rockchip_saradc_match, &pdev->dev);
-	if (!match) {
-		dev_err(&pdev->dev, "failed to match device\n");
-		return -ENODEV;
-	}
+	match_data = of_device_get_match_data(&pdev->dev);
+	if (!match_data)
+		return dev_err_probe(&pdev->dev, -ENODEV,
+				     "failed to match device\n");
 
-	info->data = match->data;
+	info->data = match_data;
 
 	/* Sanity check for possible later IP variants with more channels */
-	if (info->data->num_channels > SARADC_MAX_CHANNELS) {
-		dev_err(&pdev->dev, "max channels exceeded");
-		return -EINVAL;
-	}
+	if (info->data->num_channels > SARADC_MAX_CHANNELS)
+		return dev_err_probe(&pdev->dev, -EINVAL,
+				     "max channels exceeded");
 
 	info->regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(info->regs))
@@ -383,16 +476,6 @@ static int rockchip_saradc_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	info->pclk = devm_clk_get(&pdev->dev, "apb_pclk");
-	if (IS_ERR(info->pclk))
-		return dev_err_probe(&pdev->dev, PTR_ERR(info->pclk),
-				     "failed to get pclk\n");
-
-	info->clk = devm_clk_get(&pdev->dev, "saradc");
-	if (IS_ERR(info->clk))
-		return dev_err_probe(&pdev->dev, PTR_ERR(info->clk),
-				     "failed to get adc clock\n");
-
 	info->vref = devm_regulator_get(&pdev->dev, "vref");
 	if (IS_ERR(info->vref))
 		return dev_err_probe(&pdev->dev, PTR_ERR(info->vref),
@@ -406,23 +489,20 @@ static int rockchip_saradc_probe(struct platform_device *pdev)
 	 * This may become user-configurable in the future.
 	 */
 	ret = clk_set_rate(info->clk, info->data->clk_rate);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "failed to set adc clk rate, %d\n", ret);
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(&pdev->dev, ret,
+				     "failed to set adc clk rate\n");
 
 	ret = regulator_enable(info->vref);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "failed to enable vref regulator\n");
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(&pdev->dev, ret,
+				     "failed to enable vref regulator\n");
+
 	ret = devm_add_action_or_reset(&pdev->dev,
 				       rockchip_saradc_regulator_disable, info);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to register devm action, %d\n",
-			ret);
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret,
+				     "failed to register devm action\n");
 
 	ret = regulator_get_voltage(info->vref);
 	if (ret < 0)
@@ -430,31 +510,15 @@ static int rockchip_saradc_probe(struct platform_device *pdev)
 
 	info->uv_vref = ret;
 
-	ret = clk_prepare_enable(info->pclk);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "failed to enable pclk\n");
-		return ret;
-	}
-	ret = devm_add_action_or_reset(&pdev->dev,
-				       rockchip_saradc_pclk_disable, info);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to register devm action, %d\n",
-			ret);
-		return ret;
-	}
+	info->pclk = devm_clk_get_enabled(&pdev->dev, "apb_pclk");
+	if (IS_ERR(info->pclk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(info->pclk),
+				     "failed to get pclk\n");
 
-	ret = clk_prepare_enable(info->clk);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "failed to enable converter clock\n");
-		return ret;
-	}
-	ret = devm_add_action_or_reset(&pdev->dev,
-				       rockchip_saradc_clk_disable, info);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to register devm action, %d\n",
-			ret);
-		return ret;
-	}
+	info->clk = devm_clk_get_enabled(&pdev->dev, "saradc");
+	if (IS_ERR(info->clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(info->clk),
+				     "failed to get adc clock\n");
 
 	platform_set_drvdata(pdev, indio_dev);
 
diff --git a/drivers/iio/adc/rtq6056.c b/drivers/iio/adc/rtq6056.c
index c1b2e8dc9a26..ad4cea6839b2 100644
--- a/drivers/iio/adc/rtq6056.c
+++ b/drivers/iio/adc/rtq6056.c
@@ -652,7 +652,7 @@ static struct i2c_driver rtq6056_driver = {
 		.of_match_table = rtq6056_device_match,
 		.pm = pm_ptr(&rtq6056_pm_ops),
 	},
-	.probe_new = rtq6056_probe,
+	.probe = rtq6056_probe,
 };
 module_i2c_driver(rtq6056_driver);
 
diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
index bd7e2408bf28..f7613efb870d 100644
--- a/drivers/iio/adc/stm32-adc.c
+++ b/drivers/iio/adc/stm32-adc.c
@@ -1993,6 +1993,8 @@ static int stm32_adc_get_legacy_chan_count(struct iio_dev *indio_dev, struct stm
 	const struct stm32_adc_info *adc_info = adc->cfg->adc_info;
 	int num_channels = 0, ret;
 
+	dev_dbg(&indio_dev->dev, "using legacy channel config\n");
+
 	ret = device_property_count_u32(dev, "st,adc-channels");
 	if (ret > adc_info->max_channels) {
 		dev_err(&indio_dev->dev, "Bad st,adc-channels?\n");
diff --git a/drivers/iio/adc/ti-adc081c.c b/drivers/iio/adc/ti-adc081c.c
index c663dc59d459..50c450e7a55f 100644
--- a/drivers/iio/adc/ti-adc081c.c
+++ b/drivers/iio/adc/ti-adc081c.c
@@ -235,7 +235,7 @@ static struct i2c_driver adc081c_driver = {
 		.of_match_table = adc081c_of_match,
 		.acpi_match_table = adc081c_acpi_match,
 	},
-	.probe_new = adc081c_probe,
+	.probe = adc081c_probe,
 	.id_table = adc081c_id,
 };
 module_i2c_driver(adc081c_driver);
diff --git a/drivers/iio/adc/ti-ads1015.c b/drivers/iio/adc/ti-ads1015.c
index 56af5e148802..075c75a87544 100644
--- a/drivers/iio/adc/ti-ads1015.c
+++ b/drivers/iio/adc/ti-ads1015.c
@@ -1195,7 +1195,7 @@ static struct i2c_driver ads1015_driver = {
 		.of_match_table = ads1015_of_match,
 		.pm = &ads1015_pm_ops,
 	},
-	.probe_new	= ads1015_probe,
+	.probe		= ads1015_probe,
 	.remove		= ads1015_remove,
 	.id_table	= ads1015_id,
 };
diff --git a/drivers/iio/adc/ti-ads1100.c b/drivers/iio/adc/ti-ads1100.c
index 6b5aebb82455..1e46f07a9ca6 100644
--- a/drivers/iio/adc/ti-ads1100.c
+++ b/drivers/iio/adc/ti-ads1100.c
@@ -434,7 +434,7 @@ static struct i2c_driver ads1100_driver = {
 		   .of_match_table = ads1100_of_match,
 		   .pm = pm_ptr(&ads1100_pm_ops),
 	},
-	.probe_new = ads1100_probe,
+	.probe = ads1100_probe,
 	.id_table = ads1100_id,
 };
 
diff --git a/drivers/iio/adc/ti-ads7924.c b/drivers/iio/adc/ti-ads7924.c
index b02abb026966..afdbd04778a8 100644
--- a/drivers/iio/adc/ti-ads7924.c
+++ b/drivers/iio/adc/ti-ads7924.c
@@ -463,7 +463,7 @@ static struct i2c_driver ads7924_driver = {
 		.name = "ads7924",
 		.of_match_table = ads7924_of_match,
 	},
-	.probe_new	= ads7924_probe,
+	.probe		= ads7924_probe,
 	.id_table	= ads7924_id,
 };
 
diff --git a/drivers/iio/amplifiers/ad8366.c b/drivers/iio/amplifiers/ad8366.c
index f2c2ea79a07f..8d8c8ea94258 100644
--- a/drivers/iio/amplifiers/ad8366.c
+++ b/drivers/iio/amplifiers/ad8366.c
@@ -281,7 +281,7 @@ static int ad8366_probe(struct spi_device *spi)
 	indio_dev->info = &ad8366_info;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 
-	ret = ad8366_write(indio_dev, 0 , 0);
+	ret = ad8366_write(indio_dev, 0, 0);
 	if (ret < 0)
 		goto error_disable_reg;
 
diff --git a/drivers/iio/cdc/ad7150.c b/drivers/iio/cdc/ad7150.c
index 79aeb0aaea67..d656d2f12755 100644
--- a/drivers/iio/cdc/ad7150.c
+++ b/drivers/iio/cdc/ad7150.c
@@ -647,7 +647,7 @@ static struct i2c_driver ad7150_driver = {
 		.name = "ad7150",
 		.of_match_table = ad7150_of_match,
 	},
-	.probe_new = ad7150_probe,
+	.probe = ad7150_probe,
 	.id_table = ad7150_id,
 };
 module_i2c_driver(ad7150_driver);
diff --git a/drivers/iio/cdc/ad7746.c b/drivers/iio/cdc/ad7746.c
index a1db5469f2d1..d11bc3496dda 100644
--- a/drivers/iio/cdc/ad7746.c
+++ b/drivers/iio/cdc/ad7746.c
@@ -809,7 +809,7 @@ static struct i2c_driver ad7746_driver = {
 		.name = KBUILD_MODNAME,
 		.of_match_table = ad7746_of_match,
 	},
-	.probe_new = ad7746_probe,
+	.probe = ad7746_probe,
 	.id_table = ad7746_id,
 };
 module_i2c_driver(ad7746_driver);
diff --git a/drivers/iio/chemical/ams-iaq-core.c b/drivers/iio/chemical/ams-iaq-core.c
index 0a0fbcdd4469..164facac5db6 100644
--- a/drivers/iio/chemical/ams-iaq-core.c
+++ b/drivers/iio/chemical/ams-iaq-core.c
@@ -179,7 +179,7 @@ static struct i2c_driver ams_iaqcore_driver = {
 		.name	= "ams-iaq-core",
 		.of_match_table = ams_iaqcore_dt_ids,
 	},
-	.probe_new = ams_iaqcore_probe,
+	.probe = ams_iaqcore_probe,
 	.id_table = ams_iaqcore_id,
 };
 module_i2c_driver(ams_iaqcore_driver);
diff --git a/drivers/iio/chemical/atlas-ezo-sensor.c b/drivers/iio/chemical/atlas-ezo-sensor.c
index 307c3488f4bd..8fc926a2d33b 100644
--- a/drivers/iio/chemical/atlas-ezo-sensor.c
+++ b/drivers/iio/chemical/atlas-ezo-sensor.c
@@ -238,7 +238,7 @@ static struct i2c_driver atlas_ezo_driver = {
 		.name	= ATLAS_EZO_DRV_NAME,
 		.of_match_table	= atlas_ezo_dt_ids,
 	},
-	.probe_new	= atlas_ezo_probe,
+	.probe		= atlas_ezo_probe,
 	.id_table	= atlas_ezo_id,
 };
 module_i2c_driver(atlas_ezo_driver);
diff --git a/drivers/iio/chemical/atlas-sensor.c b/drivers/iio/chemical/atlas-sensor.c
index 024657bc59e1..fb15bb216019 100644
--- a/drivers/iio/chemical/atlas-sensor.c
+++ b/drivers/iio/chemical/atlas-sensor.c
@@ -767,7 +767,7 @@ static struct i2c_driver atlas_driver = {
 		.of_match_table	= atlas_dt_ids,
 		.pm	= pm_ptr(&atlas_pm_ops),
 	},
-	.probe_new	= atlas_probe,
+	.probe		= atlas_probe,
 	.remove		= atlas_remove,
 	.id_table	= atlas_id,
 };
diff --git a/drivers/iio/chemical/bme680_i2c.c b/drivers/iio/chemical/bme680_i2c.c
index 61b12079858d..1c7076cf91ca 100644
--- a/drivers/iio/chemical/bme680_i2c.c
+++ b/drivers/iio/chemical/bme680_i2c.c
@@ -52,7 +52,7 @@ static struct i2c_driver bme680_i2c_driver = {
 		.name			= "bme680_i2c",
 		.of_match_table		= bme680_of_i2c_match,
 	},
-	.probe_new = bme680_i2c_probe,
+	.probe = bme680_i2c_probe,
 	.id_table = bme680_i2c_id,
 };
 module_i2c_driver(bme680_i2c_driver);
diff --git a/drivers/iio/chemical/ccs811.c b/drivers/iio/chemical/ccs811.c
index 6ead80c08924..87741f155c32 100644
--- a/drivers/iio/chemical/ccs811.c
+++ b/drivers/iio/chemical/ccs811.c
@@ -567,7 +567,7 @@ static struct i2c_driver ccs811_driver = {
 		.name = "ccs811",
 		.of_match_table = ccs811_dt_ids,
 	},
-	.probe_new = ccs811_probe,
+	.probe = ccs811_probe,
 	.remove = ccs811_remove,
 	.id_table = ccs811_id,
 };
diff --git a/drivers/iio/chemical/scd30_i2c.c b/drivers/iio/chemical/scd30_i2c.c
index bae479a4721f..bd3b01ded246 100644
--- a/drivers/iio/chemical/scd30_i2c.c
+++ b/drivers/iio/chemical/scd30_i2c.c
@@ -130,7 +130,7 @@ static struct i2c_driver scd30_i2c_driver = {
 		.of_match_table = scd30_i2c_of_match,
 		.pm = pm_sleep_ptr(&scd30_pm_ops),
 	},
-	.probe_new = scd30_i2c_probe,
+	.probe = scd30_i2c_probe,
 };
 module_i2c_driver(scd30_i2c_driver);
 
diff --git a/drivers/iio/chemical/scd4x.c b/drivers/iio/chemical/scd4x.c
index f7ed9455b3c8..a4f22d926400 100644
--- a/drivers/iio/chemical/scd4x.c
+++ b/drivers/iio/chemical/scd4x.c
@@ -690,7 +690,7 @@ static struct i2c_driver scd4x_i2c_driver = {
 		.of_match_table = scd4x_dt_ids,
 		.pm = pm_sleep_ptr(&scd4x_pm_ops),
 	},
-	.probe_new = scd4x_probe,
+	.probe = scd4x_probe,
 };
 module_i2c_driver(scd4x_i2c_driver);
 
diff --git a/drivers/iio/chemical/sgp30.c b/drivers/iio/chemical/sgp30.c
index 9d0c68485b63..b509cff9ce37 100644
--- a/drivers/iio/chemical/sgp30.c
+++ b/drivers/iio/chemical/sgp30.c
@@ -575,7 +575,7 @@ static struct i2c_driver sgp_driver = {
 		.name = "sgp30",
 		.of_match_table = sgp_dt_ids,
 	},
-	.probe_new = sgp_probe,
+	.probe = sgp_probe,
 	.remove = sgp_remove,
 	.id_table = sgp_id,
 };
diff --git a/drivers/iio/chemical/sgp40.c b/drivers/iio/chemical/sgp40.c
index c0ea01300908..7f0de14a1956 100644
--- a/drivers/iio/chemical/sgp40.c
+++ b/drivers/iio/chemical/sgp40.c
@@ -368,7 +368,7 @@ static struct i2c_driver sgp40_driver = {
 		.name = "sgp40",
 		.of_match_table = sgp40_dt_ids,
 	},
-	.probe_new = sgp40_probe,
+	.probe = sgp40_probe,
 	.id_table = sgp40_id,
 };
 module_i2c_driver(sgp40_driver);
diff --git a/drivers/iio/chemical/sps30_i2c.c b/drivers/iio/chemical/sps30_i2c.c
index 0cb5d9b65d62..5c31299813ec 100644
--- a/drivers/iio/chemical/sps30_i2c.c
+++ b/drivers/iio/chemical/sps30_i2c.c
@@ -249,7 +249,7 @@ static struct i2c_driver sps30_i2c_driver = {
 		.of_match_table = sps30_i2c_of_match,
 	},
 	.id_table = sps30_i2c_id,
-	.probe_new = sps30_i2c_probe,
+	.probe = sps30_i2c_probe,
 };
 module_i2c_driver(sps30_i2c_driver);
 
diff --git a/drivers/iio/chemical/sunrise_co2.c b/drivers/iio/chemical/sunrise_co2.c
index 8440dc0c77cf..cdb8696a4e81 100644
--- a/drivers/iio/chemical/sunrise_co2.c
+++ b/drivers/iio/chemical/sunrise_co2.c
@@ -528,7 +528,7 @@ static struct i2c_driver sunrise_driver = {
 		.name = DRIVER_NAME,
 		.of_match_table = sunrise_of_match,
 	},
-	.probe_new = sunrise_probe,
+	.probe = sunrise_probe,
 };
 module_i2c_driver(sunrise_driver);
 
diff --git a/drivers/iio/chemical/vz89x.c b/drivers/iio/chemical/vz89x.c
index d4604f7ccd1e..13555f4f401a 100644
--- a/drivers/iio/chemical/vz89x.c
+++ b/drivers/iio/chemical/vz89x.c
@@ -402,7 +402,7 @@ static struct i2c_driver vz89x_driver = {
 		.name	= "vz89x",
 		.of_match_table = vz89x_dt_ids,
 	},
-	.probe_new = vz89x_probe,
+	.probe = vz89x_probe,
 	.id_table = vz89x_id,
 };
 module_i2c_driver(vz89x_driver);
diff --git a/drivers/iio/dac/ad5064.c b/drivers/iio/dac/ad5064.c
index f01249c1ba93..7712dc6be608 100644
--- a/drivers/iio/dac/ad5064.c
+++ b/drivers/iio/dac/ad5064.c
@@ -1056,7 +1056,7 @@ static struct i2c_driver ad5064_i2c_driver = {
 	.driver = {
 		   .name = "ad5064",
 	},
-	.probe_new = ad5064_i2c_probe,
+	.probe = ad5064_i2c_probe,
 	.id_table = ad5064_i2c_ids,
 };
 
diff --git a/drivers/iio/dac/ad5380.c b/drivers/iio/dac/ad5380.c
index 64b4519f8f5e..2e3e33f92bc0 100644
--- a/drivers/iio/dac/ad5380.c
+++ b/drivers/iio/dac/ad5380.c
@@ -589,7 +589,7 @@ static struct i2c_driver ad5380_i2c_driver = {
 	.driver = {
 		   .name = "ad5380",
 	},
-	.probe_new = ad5380_i2c_probe,
+	.probe = ad5380_i2c_probe,
 	.remove = ad5380_i2c_remove,
 	.id_table = ad5380_i2c_ids,
 };
diff --git a/drivers/iio/dac/ad5446.c b/drivers/iio/dac/ad5446.c
index aa3130b33456..8103d2cd13f6 100644
--- a/drivers/iio/dac/ad5446.c
+++ b/drivers/iio/dac/ad5446.c
@@ -595,7 +595,7 @@ static struct i2c_driver ad5446_i2c_driver = {
 	.driver = {
 		   .name = "ad5446",
 	},
-	.probe_new = ad5446_i2c_probe,
+	.probe = ad5446_i2c_probe,
 	.remove = ad5446_i2c_remove,
 	.id_table = ad5446_i2c_ids,
 };
diff --git a/drivers/iio/dac/ad5593r.c b/drivers/iio/dac/ad5593r.c
index d311567ab324..fae5e5a0e72f 100644
--- a/drivers/iio/dac/ad5593r.c
+++ b/drivers/iio/dac/ad5593r.c
@@ -138,7 +138,7 @@ static struct i2c_driver ad5593r_driver = {
 		.of_match_table = ad5593r_of_match,
 		.acpi_match_table = ad5593r_acpi_match,
 	},
-	.probe_new = ad5593r_i2c_probe,
+	.probe = ad5593r_i2c_probe,
 	.remove = ad5593r_i2c_remove,
 	.id_table = ad5593r_i2c_ids,
 };
diff --git a/drivers/iio/dac/ad5696-i2c.c b/drivers/iio/dac/ad5696-i2c.c
index 8a95f0278018..81541f755a3e 100644
--- a/drivers/iio/dac/ad5696-i2c.c
+++ b/drivers/iio/dac/ad5696-i2c.c
@@ -115,7 +115,7 @@ static struct i2c_driver ad5686_i2c_driver = {
 		.name = "ad5696",
 		.of_match_table = ad5686_of_match,
 	},
-	.probe_new = ad5686_i2c_probe,
+	.probe = ad5686_i2c_probe,
 	.remove = ad5686_i2c_remove,
 	.id_table = ad5686_i2c_id,
 };
diff --git a/drivers/iio/dac/ds4424.c b/drivers/iio/dac/ds4424.c
index a16a6a934d9d..e89e4c054653 100644
--- a/drivers/iio/dac/ds4424.c
+++ b/drivers/iio/dac/ds4424.c
@@ -312,7 +312,7 @@ static struct i2c_driver ds4424_driver = {
 		.of_match_table = ds4424_of_match,
 		.pm     = pm_sleep_ptr(&ds4424_pm_ops),
 	},
-	.probe_new	= ds4424_probe,
+	.probe		= ds4424_probe,
 	.remove		= ds4424_remove,
 	.id_table	= ds4424_id,
 };
diff --git a/drivers/iio/dac/m62332.c b/drivers/iio/dac/m62332.c
index b692459b0f23..ae53baccec91 100644
--- a/drivers/iio/dac/m62332.c
+++ b/drivers/iio/dac/m62332.c
@@ -238,7 +238,7 @@ static struct i2c_driver m62332_driver = {
 		.name	= "m62332",
 		.pm	= pm_sleep_ptr(&m62332_pm_ops),
 	},
-	.probe_new	= m62332_probe,
+	.probe		= m62332_probe,
 	.remove		= m62332_remove,
 	.id_table	= m62332_id,
 };
diff --git a/drivers/iio/dac/max517.c b/drivers/iio/dac/max517.c
index 25967c39365d..685980184d3c 100644
--- a/drivers/iio/dac/max517.c
+++ b/drivers/iio/dac/max517.c
@@ -203,7 +203,7 @@ static struct i2c_driver max517_driver = {
 		.name	= MAX517_DRV_NAME,
 		.pm	= pm_sleep_ptr(&max517_pm_ops),
 	},
-	.probe_new	= max517_probe,
+	.probe		= max517_probe,
 	.id_table	= max517_id,
 };
 module_i2c_driver(max517_driver);
diff --git a/drivers/iio/dac/max5821.c b/drivers/iio/dac/max5821.c
index 23da345b9250..18ba3eaaad75 100644
--- a/drivers/iio/dac/max5821.c
+++ b/drivers/iio/dac/max5821.c
@@ -377,7 +377,7 @@ static struct i2c_driver max5821_driver = {
 		.of_match_table = max5821_of_match,
 		.pm     = pm_sleep_ptr(&max5821_pm_ops),
 	},
-	.probe_new	= max5821_probe,
+	.probe		= max5821_probe,
 	.id_table	= max5821_id,
 };
 module_i2c_driver(max5821_driver);
diff --git a/drivers/iio/dac/mcp4725.c b/drivers/iio/dac/mcp4725.c
index 3f5661a3718f..f4a3124d29f2 100644
--- a/drivers/iio/dac/mcp4725.c
+++ b/drivers/iio/dac/mcp4725.c
@@ -536,7 +536,7 @@ static struct i2c_driver mcp4725_driver = {
 		.of_match_table = mcp4725_of_match,
 		.pm	= pm_sleep_ptr(&mcp4725_pm_ops),
 	},
-	.probe_new	= mcp4725_probe,
+	.probe		= mcp4725_probe,
 	.remove		= mcp4725_remove,
 	.id_table	= mcp4725_id,
 };
diff --git a/drivers/iio/dac/ti-dac5571.c b/drivers/iio/dac/ti-dac5571.c
index 40191947fea3..bab11b9adc25 100644
--- a/drivers/iio/dac/ti-dac5571.c
+++ b/drivers/iio/dac/ti-dac5571.c
@@ -426,7 +426,7 @@ static struct i2c_driver dac5571_driver = {
 		   .name = "ti-dac5571",
 		   .of_match_table = dac5571_of_id,
 	},
-	.probe_new = dac5571_probe,
+	.probe = dac5571_probe,
 	.remove   = dac5571_remove,
 	.id_table = dac5571_id,
 };
diff --git a/drivers/iio/gyro/bmg160_i2c.c b/drivers/iio/gyro/bmg160_i2c.c
index 2b019ee5b2eb..2f9675596138 100644
--- a/drivers/iio/gyro/bmg160_i2c.c
+++ b/drivers/iio/gyro/bmg160_i2c.c
@@ -70,7 +70,7 @@ static struct i2c_driver bmg160_i2c_driver = {
 		.of_match_table = bmg160_of_match,
 		.pm	= &bmg160_pm_ops,
 	},
-	.probe_new	= bmg160_i2c_probe,
+	.probe		= bmg160_i2c_probe,
 	.remove		= bmg160_i2c_remove,
 	.id_table	= bmg160_i2c_id,
 };
diff --git a/drivers/iio/gyro/fxas21002c_i2c.c b/drivers/iio/gyro/fxas21002c_i2c.c
index 9e2d0f34a672..ee7f21b718e2 100644
--- a/drivers/iio/gyro/fxas21002c_i2c.c
+++ b/drivers/iio/gyro/fxas21002c_i2c.c
@@ -56,7 +56,7 @@ static struct i2c_driver fxas21002c_i2c_driver = {
 		.pm = pm_ptr(&fxas21002c_pm_ops),
 		.of_match_table = fxas21002c_i2c_of_match,
 	},
-	.probe_new	= fxas21002c_i2c_probe,
+	.probe		= fxas21002c_i2c_probe,
 	.remove		= fxas21002c_i2c_remove,
 	.id_table	= fxas21002c_i2c_id,
 };
diff --git a/drivers/iio/gyro/itg3200_core.c b/drivers/iio/gyro/itg3200_core.c
index ceacd863d3ea..53fb92f0ac7e 100644
--- a/drivers/iio/gyro/itg3200_core.c
+++ b/drivers/iio/gyro/itg3200_core.c
@@ -405,7 +405,7 @@ static struct i2c_driver itg3200_driver = {
 		.pm	= pm_sleep_ptr(&itg3200_pm_ops),
 	},
 	.id_table	= itg3200_id,
-	.probe_new	= itg3200_probe,
+	.probe		= itg3200_probe,
 	.remove		= itg3200_remove,
 };
 
diff --git a/drivers/iio/gyro/mpu3050-i2c.c b/drivers/iio/gyro/mpu3050-i2c.c
index 2116798226bf..52b6feed2637 100644
--- a/drivers/iio/gyro/mpu3050-i2c.c
+++ b/drivers/iio/gyro/mpu3050-i2c.c
@@ -108,7 +108,7 @@ static const struct of_device_id mpu3050_i2c_of_match[] = {
 MODULE_DEVICE_TABLE(of, mpu3050_i2c_of_match);
 
 static struct i2c_driver mpu3050_i2c_driver = {
-	.probe_new = mpu3050_i2c_probe,
+	.probe = mpu3050_i2c_probe,
 	.remove = mpu3050_i2c_remove,
 	.id_table = mpu3050_i2c_id,
 	.driver = {
diff --git a/drivers/iio/gyro/st_gyro_i2c.c b/drivers/iio/gyro/st_gyro_i2c.c
index 797a1c6a0402..5a10a3556ab0 100644
--- a/drivers/iio/gyro/st_gyro_i2c.c
+++ b/drivers/iio/gyro/st_gyro_i2c.c
@@ -111,7 +111,7 @@ static struct i2c_driver st_gyro_driver = {
 		.name = "st-gyro-i2c",
 		.of_match_table = st_gyro_of_match,
 	},
-	.probe_new = st_gyro_i2c_probe,
+	.probe = st_gyro_i2c_probe,
 	.id_table = st_gyro_id_table,
 };
 module_i2c_driver(st_gyro_driver);
diff --git a/drivers/iio/health/afe4404.c b/drivers/iio/health/afe4404.c
index 21a6378b7052..ede1e8201311 100644
--- a/drivers/iio/health/afe4404.c
+++ b/drivers/iio/health/afe4404.c
@@ -609,7 +609,7 @@ static struct i2c_driver afe4404_i2c_driver = {
 		.of_match_table = afe4404_of_match,
 		.pm = pm_sleep_ptr(&afe4404_pm_ops),
 	},
-	.probe_new = afe4404_probe,
+	.probe = afe4404_probe,
 	.remove = afe4404_remove,
 	.id_table = afe4404_ids,
 };
diff --git a/drivers/iio/health/max30100.c b/drivers/iio/health/max30100.c
index a80fa9852c22..6236b4d96137 100644
--- a/drivers/iio/health/max30100.c
+++ b/drivers/iio/health/max30100.c
@@ -499,7 +499,7 @@ static struct i2c_driver max30100_driver = {
 		.name	= MAX30100_DRV_NAME,
 		.of_match_table	= max30100_dt_ids,
 	},
-	.probe_new	= max30100_probe,
+	.probe		= max30100_probe,
 	.remove		= max30100_remove,
 	.id_table	= max30100_id,
 };
diff --git a/drivers/iio/health/max30102.c b/drivers/iio/health/max30102.c
index 7edcf9e05687..37e619827e8a 100644
--- a/drivers/iio/health/max30102.c
+++ b/drivers/iio/health/max30102.c
@@ -631,7 +631,7 @@ static struct i2c_driver max30102_driver = {
 		.name	= MAX30102_DRV_NAME,
 		.of_match_table	= max30102_dt_ids,
 	},
-	.probe_new	= max30102_probe,
+	.probe		= max30102_probe,
 	.remove		= max30102_remove,
 	.id_table	= max30102_id,
 };
diff --git a/drivers/iio/humidity/am2315.c b/drivers/iio/humidity/am2315.c
index f246516bd45e..37a35d1153d5 100644
--- a/drivers/iio/humidity/am2315.c
+++ b/drivers/iio/humidity/am2315.c
@@ -262,7 +262,7 @@ static struct i2c_driver am2315_driver = {
 	.driver = {
 		.name = "am2315",
 	},
-	.probe_new =        am2315_probe,
+	.probe =        am2315_probe,
 	.id_table =         am2315_i2c_id,
 };
 
diff --git a/drivers/iio/humidity/hdc100x.c b/drivers/iio/humidity/hdc100x.c
index 49a950d739e4..202014da2785 100644
--- a/drivers/iio/humidity/hdc100x.c
+++ b/drivers/iio/humidity/hdc100x.c
@@ -428,7 +428,7 @@ static struct i2c_driver hdc100x_driver = {
 		.of_match_table = hdc100x_dt_ids,
 		.acpi_match_table = hdc100x_acpi_match,
 	},
-	.probe_new = hdc100x_probe,
+	.probe = hdc100x_probe,
 	.id_table = hdc100x_id,
 };
 module_i2c_driver(hdc100x_driver);
diff --git a/drivers/iio/humidity/hdc2010.c b/drivers/iio/humidity/hdc2010.c
index c8fddd612e06..f5867659e00f 100644
--- a/drivers/iio/humidity/hdc2010.c
+++ b/drivers/iio/humidity/hdc2010.c
@@ -338,7 +338,7 @@ static struct i2c_driver hdc2010_driver = {
 		.name	= "hdc2010",
 		.of_match_table = hdc2010_dt_ids,
 	},
-	.probe_new = hdc2010_probe,
+	.probe = hdc2010_probe,
 	.remove = hdc2010_remove,
 	.id_table = hdc2010_id,
 };
diff --git a/drivers/iio/humidity/hts221_i2c.c b/drivers/iio/humidity/hts221_i2c.c
index d81869423cf0..30f2068ea156 100644
--- a/drivers/iio/humidity/hts221_i2c.c
+++ b/drivers/iio/humidity/hts221_i2c.c
@@ -65,7 +65,7 @@ static struct i2c_driver hts221_driver = {
 		.of_match_table = hts221_i2c_of_match,
 		.acpi_match_table = ACPI_PTR(hts221_acpi_match),
 	},
-	.probe_new = hts221_i2c_probe,
+	.probe = hts221_i2c_probe,
 	.id_table = hts221_i2c_id_table,
 };
 module_i2c_driver(hts221_driver);
diff --git a/drivers/iio/humidity/htu21.c b/drivers/iio/humidity/htu21.c
index 8411a9f3e828..39e886075299 100644
--- a/drivers/iio/humidity/htu21.c
+++ b/drivers/iio/humidity/htu21.c
@@ -244,7 +244,7 @@ static const struct of_device_id htu21_of_match[] = {
 MODULE_DEVICE_TABLE(of, htu21_of_match);
 
 static struct i2c_driver htu21_driver = {
-	.probe_new = htu21_probe,
+	.probe = htu21_probe,
 	.id_table = htu21_id,
 	.driver = {
 		   .name = "htu21",
diff --git a/drivers/iio/humidity/si7005.c b/drivers/iio/humidity/si7005.c
index fa1faf168c8d..ebfb79bc9edc 100644
--- a/drivers/iio/humidity/si7005.c
+++ b/drivers/iio/humidity/si7005.c
@@ -173,7 +173,7 @@ static struct i2c_driver si7005_driver = {
 	.driver = {
 		.name	= "si7005",
 	},
-	.probe_new = si7005_probe,
+	.probe = si7005_probe,
 	.id_table = si7005_id,
 };
 module_i2c_driver(si7005_driver);
diff --git a/drivers/iio/humidity/si7020.c b/drivers/iio/humidity/si7020.c
index 3e50592e8e68..fb1006649328 100644
--- a/drivers/iio/humidity/si7020.c
+++ b/drivers/iio/humidity/si7020.c
@@ -155,7 +155,7 @@ static struct i2c_driver si7020_driver = {
 		.name = "si7020",
 		.of_match_table = si7020_dt_ids,
 	},
-	.probe_new	= si7020_probe,
+	.probe		= si7020_probe,
 	.id_table	= si7020_id,
 };
 
diff --git a/drivers/iio/imu/bmi160/bmi160_i2c.c b/drivers/iio/imu/bmi160/bmi160_i2c.c
index 2ca907d396a0..81652c08e644 100644
--- a/drivers/iio/imu/bmi160/bmi160_i2c.c
+++ b/drivers/iio/imu/bmi160/bmi160_i2c.c
@@ -60,7 +60,7 @@ static struct i2c_driver bmi160_i2c_driver = {
 		.acpi_match_table	= bmi160_acpi_match,
 		.of_match_table		= bmi160_of_match,
 	},
-	.probe_new	= bmi160_i2c_probe,
+	.probe		= bmi160_i2c_probe,
 	.id_table	= bmi160_i2c_id,
 };
 module_i2c_driver(bmi160_i2c_driver);
diff --git a/drivers/iio/imu/bno055/bno055_i2c.c b/drivers/iio/imu/bno055/bno055_i2c.c
index c1bbc0fe34f9..6ecd750c6b76 100644
--- a/drivers/iio/imu/bno055/bno055_i2c.c
+++ b/drivers/iio/imu/bno055/bno055_i2c.c
@@ -46,7 +46,7 @@ static struct i2c_driver bno055_driver = {
 		.name = "bno055-i2c",
 		.of_match_table = bno055_i2c_of_match,
 	},
-	.probe_new = bno055_i2c_probe,
+	.probe = bno055_i2c_probe,
 	.id_table = bno055_i2c_id,
 };
 module_i2c_driver(bno055_driver);
diff --git a/drivers/iio/imu/fxos8700_i2c.c b/drivers/iio/imu/fxos8700_i2c.c
index a74a15fda8cb..2ace306d0f9a 100644
--- a/drivers/iio/imu/fxos8700_i2c.c
+++ b/drivers/iio/imu/fxos8700_i2c.c
@@ -60,7 +60,7 @@ static struct i2c_driver fxos8700_i2c_driver = {
 		.acpi_match_table       = ACPI_PTR(fxos8700_acpi_match),
 		.of_match_table         = fxos8700_of_match,
 	},
-	.probe_new      = fxos8700_i2c_probe,
+	.probe          = fxos8700_i2c_probe,
 	.id_table       = fxos8700_i2c_id,
 };
 module_i2c_driver(fxos8700_i2c_driver);
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c
index eb2681ad375f..1af559403ba6 100644
--- a/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c
@@ -98,7 +98,7 @@ static struct i2c_driver inv_icm42600_driver = {
 		.of_match_table = inv_icm42600_of_matches,
 		.pm = pm_ptr(&inv_icm42600_pm_ops),
 	},
-	.probe_new = inv_icm42600_probe,
+	.probe = inv_icm42600_probe,
 };
 module_i2c_driver(inv_icm42600_driver);
 
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_timestamp.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_timestamp.c
index 7f2dc41f807b..37cbf08acb3a 100644
--- a/drivers/iio/imu/inv_icm42600/inv_icm42600_timestamp.c
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_timestamp.c
@@ -93,8 +93,8 @@ static bool inv_validate_period(uint32_t period, uint32_t mult)
 		return false;
 }
 
-static bool inv_compute_chip_period(struct inv_icm42600_timestamp *ts,
-				    uint32_t mult, uint32_t period)
+static bool inv_update_chip_period(struct inv_icm42600_timestamp *ts,
+				   uint32_t mult, uint32_t period)
 {
 	uint32_t new_chip_period;
 
@@ -104,10 +104,31 @@ static bool inv_compute_chip_period(struct inv_icm42600_timestamp *ts,
 	/* update chip internal period estimation */
 	new_chip_period = period / mult;
 	inv_update_acc(&ts->chip_period, new_chip_period);
+	ts->period = ts->mult * ts->chip_period.val;
 
 	return true;
 }
 
+static void inv_align_timestamp_it(struct inv_icm42600_timestamp *ts)
+{
+	int64_t delta, jitter;
+	int64_t adjust;
+
+	/* delta time between last sample and last interrupt */
+	delta = ts->it.lo - ts->timestamp;
+
+	/* adjust timestamp while respecting jitter */
+	jitter = div_s64((int64_t)ts->period * INV_ICM42600_TIMESTAMP_JITTER, 100);
+	if (delta > jitter)
+		adjust = jitter;
+	else if (delta < -jitter)
+		adjust = -jitter;
+	else
+		adjust = 0;
+
+	ts->timestamp += adjust;
+}
+
 void inv_icm42600_timestamp_interrupt(struct inv_icm42600_timestamp *ts,
 				      uint32_t fifo_period, size_t fifo_nb,
 				      size_t sensor_nb, int64_t timestamp)
@@ -116,7 +137,6 @@ void inv_icm42600_timestamp_interrupt(struct inv_icm42600_timestamp *ts,
 	int64_t delta, interval;
 	const uint32_t fifo_mult = fifo_period / INV_ICM42600_TIMESTAMP_PERIOD;
 	uint32_t period = ts->period;
-	int32_t m;
 	bool valid = false;
 
 	if (fifo_nb == 0)
@@ -130,10 +150,7 @@ void inv_icm42600_timestamp_interrupt(struct inv_icm42600_timestamp *ts,
 	if (it->lo != 0) {
 		/* compute period: delta time divided by number of samples */
 		period = div_s64(delta, fifo_nb);
-		valid = inv_compute_chip_period(ts, fifo_mult, period);
-		/* update sensor period if chip internal period is updated */
-		if (valid)
-			ts->period = ts->mult * ts->chip_period.val;
+		valid = inv_update_chip_period(ts, fifo_mult, period);
 	}
 
 	/* no previous data, compute theoritical value from interrupt */
@@ -145,22 +162,8 @@ void inv_icm42600_timestamp_interrupt(struct inv_icm42600_timestamp *ts,
 	}
 
 	/* if interrupt interval is valid, sync with interrupt timestamp */
-	if (valid) {
-		/* compute measured fifo_period */
-		fifo_period = fifo_mult * ts->chip_period.val;
-		/* delta time between last sample and last interrupt */
-		delta = it->lo - ts->timestamp;
-		/* if there are multiple samples, go back to first one */
-		while (delta >= (fifo_period * 3 / 2))
-			delta -= fifo_period;
-		/* compute maximal adjustment value */
-		m = INV_ICM42600_TIMESTAMP_MAX_PERIOD(ts->period) - ts->period;
-		if (delta > m)
-			delta = m;
-		else if (delta < -m)
-			delta = -m;
-		ts->timestamp += delta;
-	}
+	if (valid)
+		inv_align_timestamp_it(ts);
 }
 
 void inv_icm42600_timestamp_apply_odr(struct inv_icm42600_timestamp *ts,
diff --git a/drivers/iio/imu/inv_mpu6050/Kconfig b/drivers/iio/imu/inv_mpu6050/Kconfig
index 3636b1bc90f1..64dd73dcc4ba 100644
--- a/drivers/iio/imu/inv_mpu6050/Kconfig
+++ b/drivers/iio/imu/inv_mpu6050/Kconfig
@@ -16,7 +16,7 @@ config INV_MPU6050_I2C
 	select REGMAP_I2C
 	help
 	  This driver supports the Invensense MPU6050/9150,
-	  MPU6500/6515/6880/9250/9255, ICM20608(D)/20609/20689, ICM20602/ICM20690
+	  MPU6500/6515/6880/9250/9255, ICM20608(D)/20609/20689, ICM20600/20602/20690
 	  and IAM20680 motion tracking devices over I2C.
 	  This driver can be built as a module. The module will be called
 	  inv-mpu6050-i2c.
@@ -28,7 +28,7 @@ config INV_MPU6050_SPI
 	select REGMAP_SPI
 	help
 	  This driver supports the Invensense MPU6000,
-	  MPU6500/6515/6880/9250/9255, ICM20608(D)/20609/20689, ICM20602/ICM20690
+	  MPU6500/6515/6880/9250/9255, ICM20608(D)/20609/20689, ICM20600/20602/20690
 	  and IAM20680 motion tracking devices over SPI.
 	  This driver can be built as a module. The module will be called
 	  inv-mpu6050-spi.
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index 8a129120b73d..592a6e60b413 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -245,6 +245,15 @@ static const struct inv_mpu6050_hw hw_info[] = {
 		.startup_time = {INV_MPU6500_GYRO_STARTUP_TIME, INV_MPU6500_ACCEL_STARTUP_TIME},
 	},
 	{
+		.whoami = INV_ICM20600_WHOAMI_VALUE,
+		.name = "ICM20600",
+		.reg = &reg_set_icm20602,
+		.config = &chip_config_6500,
+		.fifo_size = 1008,
+		.temp = {INV_ICM20608_TEMP_OFFSET, INV_ICM20608_TEMP_SCALE},
+		.startup_time = {INV_ICM20602_GYRO_STARTUP_TIME, INV_ICM20602_ACCEL_STARTUP_TIME},
+	},
+	{
 		.whoami = INV_ICM20602_WHOAMI_VALUE,
 		.name = "ICM20602",
 		.reg = &reg_set_icm20602,
@@ -1597,6 +1606,7 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name,
 		indio_dev->num_channels = ARRAY_SIZE(inv_mpu9250_channels);
 		indio_dev->available_scan_masks = inv_mpu9x50_scan_masks;
 		break;
+	case INV_ICM20600:
 	case INV_ICM20602:
 		indio_dev->channels = inv_mpu_channels;
 		indio_dev->num_channels = ARRAY_SIZE(inv_mpu_channels);
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
index 2f2da4cb7321..410ea39fd495 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
@@ -32,6 +32,7 @@ static bool inv_mpu_i2c_aux_bus(struct device *dev)
 	case INV_ICM20608D:
 	case INV_ICM20609:
 	case INV_ICM20689:
+	case INV_ICM20600:
 	case INV_ICM20602:
 	case INV_IAM20680:
 		/* no i2c auxiliary bus on the chip */
@@ -183,6 +184,7 @@ static const struct i2c_device_id inv_mpu_id[] = {
 	{"icm20608d", INV_ICM20608D},
 	{"icm20609", INV_ICM20609},
 	{"icm20689", INV_ICM20689},
+	{"icm20600", INV_ICM20600},
 	{"icm20602", INV_ICM20602},
 	{"icm20690", INV_ICM20690},
 	{"iam20680", INV_IAM20680},
@@ -237,6 +239,10 @@ static const struct of_device_id inv_of_match[] = {
 		.data = (void *)INV_ICM20689
 	},
 	{
+		.compatible = "invensense,icm20600",
+		.data = (void *)INV_ICM20600
+	},
+	{
 		.compatible = "invensense,icm20602",
 		.data = (void *)INV_ICM20602
 	},
@@ -259,7 +265,7 @@ static const struct acpi_device_id inv_acpi_match[] = {
 MODULE_DEVICE_TABLE(acpi, inv_acpi_match);
 
 static struct i2c_driver inv_mpu_driver = {
-	.probe_new	=	inv_mpu_probe,
+	.probe		=	inv_mpu_probe,
 	.remove		=	inv_mpu_remove,
 	.id_table	=	inv_mpu_id,
 	.driver = {
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
index 94b54c501ec0..b4ab2c397d0f 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
@@ -79,6 +79,7 @@ enum inv_devices {
 	INV_ICM20608D,
 	INV_ICM20609,
 	INV_ICM20689,
+	INV_ICM20600,
 	INV_ICM20602,
 	INV_ICM20690,
 	INV_IAM20680,
@@ -398,6 +399,7 @@ struct inv_mpu6050_state {
 #define INV_ICM20608D_WHOAMI_VALUE		0xAE
 #define INV_ICM20609_WHOAMI_VALUE		0xA6
 #define INV_ICM20689_WHOAMI_VALUE		0x98
+#define INV_ICM20600_WHOAMI_VALUE		0x11
 #define INV_ICM20602_WHOAMI_VALUE		0x12
 #define INV_ICM20690_WHOAMI_VALUE		0x20
 #define INV_IAM20680_WHOAMI_VALUE		0xA9
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
index 89f46c2f213d..05451ca1580b 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
@@ -76,6 +76,7 @@ static const struct spi_device_id inv_mpu_id[] = {
 	{"icm20608d", INV_ICM20608D},
 	{"icm20609", INV_ICM20609},
 	{"icm20689", INV_ICM20689},
+	{"icm20600", INV_ICM20600},
 	{"icm20602", INV_ICM20602},
 	{"icm20690", INV_ICM20690},
 	{"iam20680", INV_IAM20680},
@@ -126,6 +127,10 @@ static const struct of_device_id inv_of_match[] = {
 		.data = (void *)INV_ICM20689
 	},
 	{
+		.compatible = "invensense,icm20600",
+		.data = (void *)INV_ICM20600
+	},
+	{
 		.compatible = "invensense,icm20602",
 		.data = (void *)INV_ICM20602
 	},
diff --git a/drivers/iio/imu/kmx61.c b/drivers/iio/imu/kmx61.c
index 53ba020fa5d0..958167b31241 100644
--- a/drivers/iio/imu/kmx61.c
+++ b/drivers/iio/imu/kmx61.c
@@ -1517,7 +1517,7 @@ static struct i2c_driver kmx61_driver = {
 		.acpi_match_table = ACPI_PTR(kmx61_acpi_match),
 		.pm = pm_ptr(&kmx61_pm_ops),
 	},
-	.probe_new	= kmx61_probe,
+	.probe		= kmx61_probe,
 	.remove		= kmx61_remove,
 	.id_table	= kmx61_id,
 };
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
index 020717f92363..911444ec57c0 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
@@ -179,7 +179,7 @@ static struct i2c_driver st_lsm6dsx_driver = {
 		.of_match_table = st_lsm6dsx_i2c_of_match,
 		.acpi_match_table = st_lsm6dsx_i2c_acpi_match,
 	},
-	.probe_new = st_lsm6dsx_i2c_probe,
+	.probe = st_lsm6dsx_i2c_probe,
 	.id_table = st_lsm6dsx_i2c_id_table,
 };
 module_i2c_driver(st_lsm6dsx_driver);
diff --git a/drivers/iio/imu/st_lsm9ds0/Kconfig b/drivers/iio/imu/st_lsm9ds0/Kconfig
index d29558edee60..7aef714b6ecb 100644
--- a/drivers/iio/imu/st_lsm9ds0/Kconfig
+++ b/drivers/iio/imu/st_lsm9ds0/Kconfig
@@ -10,7 +10,8 @@ config IIO_ST_LSM9DS0
 
 	help
 	  Say yes here to build support for STMicroelectronics LSM9DS0 IMU
-	  sensor. Supported devices: accelerometer/magnetometer of lsm9ds0.
+	  sensor. Supported devices: accelerometer/magnetometer of lsm9ds0
+	  and lsm303d.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called st_lsm9ds0.
diff --git a/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c
index a90138d8b06a..61d855083aa0 100644
--- a/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c
+++ b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c
@@ -19,6 +19,10 @@
 
 static const struct of_device_id st_lsm9ds0_of_match[] = {
 	{
+		.compatible = "st,lsm303d-imu",
+		.data = LSM303D_IMU_DEV_NAME,
+	},
+	{
 		.compatible = "st,lsm9ds0-imu",
 		.data = LSM9DS0_IMU_DEV_NAME,
 	},
@@ -27,11 +31,18 @@ static const struct of_device_id st_lsm9ds0_of_match[] = {
 MODULE_DEVICE_TABLE(of, st_lsm9ds0_of_match);
 
 static const struct i2c_device_id st_lsm9ds0_id_table[] = {
+	{ LSM303D_IMU_DEV_NAME },
 	{ LSM9DS0_IMU_DEV_NAME },
 	{}
 };
 MODULE_DEVICE_TABLE(i2c, st_lsm9ds0_id_table);
 
+static const struct acpi_device_id st_lsm9ds0_acpi_match[] = {
+	{"ACCL0001", (kernel_ulong_t)LSM303D_IMU_DEV_NAME},
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, st_lsm9ds0_acpi_match);
+
 static const struct regmap_config st_lsm9ds0_regmap_config = {
 	.reg_bits	= 8,
 	.val_bits	= 8,
@@ -68,8 +79,9 @@ static struct i2c_driver st_lsm9ds0_driver = {
 	.driver = {
 		.name = "st-lsm9ds0-i2c",
 		.of_match_table = st_lsm9ds0_of_match,
+		.acpi_match_table = st_lsm9ds0_acpi_match,
 	},
-	.probe_new = st_lsm9ds0_i2c_probe,
+	.probe = st_lsm9ds0_i2c_probe,
 	.id_table = st_lsm9ds0_id_table,
 };
 module_i2c_driver(st_lsm9ds0_driver);
diff --git a/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_spi.c b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_spi.c
index b743bf3546a7..8cc041d56cf7 100644
--- a/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_spi.c
+++ b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_spi.c
@@ -19,6 +19,10 @@
 
 static const struct of_device_id st_lsm9ds0_of_match[] = {
 	{
+		.compatible = "st,lsm303d-imu",
+		.data = LSM303D_IMU_DEV_NAME,
+	},
+	{
 		.compatible = "st,lsm9ds0-imu",
 		.data = LSM9DS0_IMU_DEV_NAME,
 	},
@@ -27,6 +31,7 @@ static const struct of_device_id st_lsm9ds0_of_match[] = {
 MODULE_DEVICE_TABLE(of, st_lsm9ds0_of_match);
 
 static const struct spi_device_id st_lsm9ds0_id_table[] = {
+	{ LSM303D_IMU_DEV_NAME },
 	{ LSM9DS0_IMU_DEV_NAME },
 	{}
 };
diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c
index a7a080bed180..176d31d9f9d8 100644
--- a/drivers/iio/industrialio-buffer.c
+++ b/drivers/iio/industrialio-buffer.c
@@ -194,7 +194,7 @@ static ssize_t iio_buffer_write(struct file *filp, const char __user *buf,
 	written = 0;
 	add_wait_queue(&rb->pollq, &wait);
 	do {
-		if (indio_dev->info == NULL)
+		if (!indio_dev->info)
 			return -ENODEV;
 
 		if (!iio_buffer_space_available(rb)) {
@@ -210,7 +210,7 @@ static ssize_t iio_buffer_write(struct file *filp, const char __user *buf,
 			}
 
 			wait_woken(&wait, TASK_INTERRUPTIBLE,
-					MAX_SCHEDULE_TIMEOUT);
+				   MAX_SCHEDULE_TIMEOUT);
 			continue;
 		}
 
@@ -242,7 +242,7 @@ static __poll_t iio_buffer_poll(struct file *filp,
 	struct iio_buffer *rb = ib->buffer;
 	struct iio_dev *indio_dev = ib->indio_dev;
 
-	if (!indio_dev->info || rb == NULL)
+	if (!indio_dev->info || !rb)
 		return 0;
 
 	poll_wait(filp, &rb->pollq, wait);
@@ -407,9 +407,9 @@ static ssize_t iio_scan_el_show(struct device *dev,
 
 /* Note NULL used as error indicator as it doesn't make sense. */
 static const unsigned long *iio_scan_mask_match(const unsigned long *av_masks,
-					  unsigned int masklength,
-					  const unsigned long *mask,
-					  bool strict)
+						unsigned int masklength,
+						const unsigned long *mask,
+						bool strict)
 {
 	if (bitmap_empty(mask, masklength))
 		return NULL;
@@ -427,7 +427,7 @@ static const unsigned long *iio_scan_mask_match(const unsigned long *av_masks,
 }
 
 static bool iio_validate_scan_mask(struct iio_dev *indio_dev,
-	const unsigned long *mask)
+				   const unsigned long *mask)
 {
 	if (!indio_dev->setup_ops->validate_scan_mask)
 		return true;
@@ -446,7 +446,7 @@ static bool iio_validate_scan_mask(struct iio_dev *indio_dev,
  * individual buffers request is plausible.
  */
 static int iio_scan_mask_set(struct iio_dev *indio_dev,
-		      struct iio_buffer *buffer, int bit)
+			     struct iio_buffer *buffer, int bit)
 {
 	const unsigned long *mask;
 	unsigned long *trialmask;
@@ -539,7 +539,6 @@ error_ret:
 	mutex_unlock(&iio_dev_opaque->mlock);
 
 	return ret < 0 ? ret : len;
-
 }
 
 static ssize_t iio_scan_el_ts_show(struct device *dev,
@@ -706,7 +705,7 @@ static unsigned int iio_storage_bytes_for_timestamp(struct iio_dev *indio_dev)
 }
 
 static int iio_compute_scan_bytes(struct iio_dev *indio_dev,
-				const unsigned long *mask, bool timestamp)
+				  const unsigned long *mask, bool timestamp)
 {
 	unsigned int bytes = 0;
 	int length, i, largest = 0;
@@ -732,7 +731,7 @@ static int iio_compute_scan_bytes(struct iio_dev *indio_dev,
 }
 
 static void iio_buffer_activate(struct iio_dev *indio_dev,
-	struct iio_buffer *buffer)
+				struct iio_buffer *buffer)
 {
 	struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev);
 
@@ -753,12 +752,12 @@ static void iio_buffer_deactivate_all(struct iio_dev *indio_dev)
 	struct iio_buffer *buffer, *_buffer;
 
 	list_for_each_entry_safe(buffer, _buffer,
-			&iio_dev_opaque->buffer_list, buffer_list)
+				 &iio_dev_opaque->buffer_list, buffer_list)
 		iio_buffer_deactivate(buffer);
 }
 
 static int iio_buffer_enable(struct iio_buffer *buffer,
-	struct iio_dev *indio_dev)
+			     struct iio_dev *indio_dev)
 {
 	if (!buffer->access->enable)
 		return 0;
@@ -766,7 +765,7 @@ static int iio_buffer_enable(struct iio_buffer *buffer,
 }
 
 static int iio_buffer_disable(struct iio_buffer *buffer,
-	struct iio_dev *indio_dev)
+			      struct iio_dev *indio_dev)
 {
 	if (!buffer->access->disable)
 		return 0;
@@ -774,7 +773,7 @@ static int iio_buffer_disable(struct iio_buffer *buffer,
 }
 
 static void iio_buffer_update_bytes_per_datum(struct iio_dev *indio_dev,
-	struct iio_buffer *buffer)
+					      struct iio_buffer *buffer)
 {
 	unsigned int bytes;
 
@@ -782,13 +781,13 @@ static void iio_buffer_update_bytes_per_datum(struct iio_dev *indio_dev,
 		return;
 
 	bytes = iio_compute_scan_bytes(indio_dev, buffer->scan_mask,
-		buffer->scan_timestamp);
+				       buffer->scan_timestamp);
 
 	buffer->access->set_bytes_per_datum(buffer, bytes);
 }
 
 static int iio_buffer_request_update(struct iio_dev *indio_dev,
-	struct iio_buffer *buffer)
+				     struct iio_buffer *buffer)
 {
 	int ret;
 
@@ -797,7 +796,7 @@ static int iio_buffer_request_update(struct iio_dev *indio_dev,
 		ret = buffer->access->request_update(buffer);
 		if (ret) {
 			dev_dbg(&indio_dev->dev,
-			       "Buffer not started: buffer parameter update failed (%d)\n",
+				"Buffer not started: buffer parameter update failed (%d)\n",
 				ret);
 			return ret;
 		}
@@ -807,7 +806,7 @@ static int iio_buffer_request_update(struct iio_dev *indio_dev,
 }
 
 static void iio_free_scan_mask(struct iio_dev *indio_dev,
-	const unsigned long *mask)
+			       const unsigned long *mask)
 {
 	/* If the mask is dynamically allocated free it, otherwise do nothing */
 	if (!indio_dev->available_scan_masks)
@@ -823,8 +822,9 @@ struct iio_device_config {
 };
 
 static int iio_verify_update(struct iio_dev *indio_dev,
-	struct iio_buffer *insert_buffer, struct iio_buffer *remove_buffer,
-	struct iio_device_config *config)
+			     struct iio_buffer *insert_buffer,
+			     struct iio_buffer *remove_buffer,
+			     struct iio_device_config *config)
 {
 	struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev);
 	unsigned long *compound_mask;
@@ -864,7 +864,7 @@ static int iio_verify_update(struct iio_dev *indio_dev,
 	if (insert_buffer) {
 		modes &= insert_buffer->access->modes;
 		config->watermark = min(config->watermark,
-			insert_buffer->watermark);
+					insert_buffer->watermark);
 	}
 
 	/* Definitely possible for devices to support both of these. */
@@ -890,7 +890,7 @@ static int iio_verify_update(struct iio_dev *indio_dev,
 
 	/* What scan mask do we actually have? */
 	compound_mask = bitmap_zalloc(indio_dev->masklength, GFP_KERNEL);
-	if (compound_mask == NULL)
+	if (!compound_mask)
 		return -ENOMEM;
 
 	scan_timestamp = false;
@@ -911,18 +911,18 @@ static int iio_verify_update(struct iio_dev *indio_dev,
 
 	if (indio_dev->available_scan_masks) {
 		scan_mask = iio_scan_mask_match(indio_dev->available_scan_masks,
-				    indio_dev->masklength,
-				    compound_mask,
-				    strict_scanmask);
+						indio_dev->masklength,
+						compound_mask,
+						strict_scanmask);
 		bitmap_free(compound_mask);
-		if (scan_mask == NULL)
+		if (!scan_mask)
 			return -EINVAL;
 	} else {
 		scan_mask = compound_mask;
 	}
 
 	config->scan_bytes = iio_compute_scan_bytes(indio_dev,
-				    scan_mask, scan_timestamp);
+						    scan_mask, scan_timestamp);
 	config->scan_mask = scan_mask;
 	config->scan_timestamp = scan_timestamp;
 
@@ -954,16 +954,16 @@ static void iio_buffer_demux_free(struct iio_buffer *buffer)
 }
 
 static int iio_buffer_add_demux(struct iio_buffer *buffer,
-	struct iio_demux_table **p, unsigned int in_loc, unsigned int out_loc,
-	unsigned int length)
+				struct iio_demux_table **p, unsigned int in_loc,
+				unsigned int out_loc,
+				unsigned int length)
 {
-
 	if (*p && (*p)->from + (*p)->length == in_loc &&
-		(*p)->to + (*p)->length == out_loc) {
+	    (*p)->to + (*p)->length == out_loc) {
 		(*p)->length += length;
 	} else {
 		*p = kmalloc(sizeof(**p), GFP_KERNEL);
-		if (*p == NULL)
+		if (!(*p))
 			return -ENOMEM;
 		(*p)->from = in_loc;
 		(*p)->to = out_loc;
@@ -1027,7 +1027,7 @@ static int iio_buffer_update_demux(struct iio_dev *indio_dev,
 		out_loc += length;
 	}
 	buffer->demux_bounce = kzalloc(out_loc, GFP_KERNEL);
-	if (buffer->demux_bounce == NULL) {
+	if (!buffer->demux_bounce) {
 		ret = -ENOMEM;
 		goto error_clear_mux_table;
 	}
@@ -1060,7 +1060,7 @@ error_clear_mux_table:
 }
 
 static int iio_enable_buffers(struct iio_dev *indio_dev,
-	struct iio_device_config *config)
+			      struct iio_device_config *config)
 {
 	struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev);
 	struct iio_buffer *buffer, *tmp = NULL;
@@ -1078,7 +1078,7 @@ static int iio_enable_buffers(struct iio_dev *indio_dev,
 		ret = indio_dev->setup_ops->preenable(indio_dev);
 		if (ret) {
 			dev_dbg(&indio_dev->dev,
-			       "Buffer not started: buffer preenable failed (%d)\n", ret);
+				"Buffer not started: buffer preenable failed (%d)\n", ret);
 			goto err_undo_config;
 		}
 	}
@@ -1118,7 +1118,7 @@ static int iio_enable_buffers(struct iio_dev *indio_dev,
 		ret = indio_dev->setup_ops->postenable(indio_dev);
 		if (ret) {
 			dev_dbg(&indio_dev->dev,
-			       "Buffer not started: postenable failed (%d)\n", ret);
+				"Buffer not started: postenable failed (%d)\n", ret);
 			goto err_detach_pollfunc;
 		}
 	}
@@ -1194,15 +1194,15 @@ static int iio_disable_buffers(struct iio_dev *indio_dev)
 }
 
 static int __iio_update_buffers(struct iio_dev *indio_dev,
-		       struct iio_buffer *insert_buffer,
-		       struct iio_buffer *remove_buffer)
+				struct iio_buffer *insert_buffer,
+				struct iio_buffer *remove_buffer)
 {
 	struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev);
 	struct iio_device_config new_config;
 	int ret;
 
 	ret = iio_verify_update(indio_dev, insert_buffer, remove_buffer,
-		&new_config);
+				&new_config);
 	if (ret)
 		return ret;
 
@@ -1258,7 +1258,7 @@ int iio_update_buffers(struct iio_dev *indio_dev,
 		return 0;
 
 	if (insert_buffer &&
-	    (insert_buffer->direction == IIO_BUFFER_DIRECTION_OUT))
+	    insert_buffer->direction == IIO_BUFFER_DIRECTION_OUT)
 		return -EINVAL;
 
 	mutex_lock(&iio_dev_opaque->info_exist_lock);
@@ -1275,7 +1275,7 @@ int iio_update_buffers(struct iio_dev *indio_dev,
 		goto out_unlock;
 	}
 
-	if (indio_dev->info == NULL) {
+	if (!indio_dev->info) {
 		ret = -ENODEV;
 		goto out_unlock;
 	}
@@ -1615,7 +1615,7 @@ static int __iio_buffer_alloc_sysfs_and_mask(struct iio_buffer *buffer,
 
 	buffer_attrcount = 0;
 	if (buffer->attrs) {
-		while (buffer->attrs[buffer_attrcount] != NULL)
+		while (buffer->attrs[buffer_attrcount])
 			buffer_attrcount++;
 	}
 	buffer_attrcount += ARRAY_SIZE(iio_buffer_attrs);
@@ -1643,7 +1643,7 @@ static int __iio_buffer_alloc_sysfs_and_mask(struct iio_buffer *buffer,
 			}
 
 			ret = iio_buffer_add_channel_sysfs(indio_dev, buffer,
-							 &channels[i]);
+							   &channels[i]);
 			if (ret < 0)
 				goto error_cleanup_dynamic;
 			scan_el_attrcount += ret;
@@ -1651,10 +1651,10 @@ static int __iio_buffer_alloc_sysfs_and_mask(struct iio_buffer *buffer,
 				iio_dev_opaque->scan_index_timestamp =
 					channels[i].scan_index;
 		}
-		if (indio_dev->masklength && buffer->scan_mask == NULL) {
+		if (indio_dev->masklength && !buffer->scan_mask) {
 			buffer->scan_mask = bitmap_zalloc(indio_dev->masklength,
 							  GFP_KERNEL);
-			if (buffer->scan_mask == NULL) {
+			if (!buffer->scan_mask) {
 				ret = -ENOMEM;
 				goto error_cleanup_dynamic;
 			}
@@ -1771,7 +1771,7 @@ int iio_buffers_alloc_sysfs_and_mask(struct iio_dev *indio_dev)
 			goto error_unwind_sysfs_and_mask;
 	}
 
-	sz = sizeof(*(iio_dev_opaque->buffer_ioctl_handler));
+	sz = sizeof(*iio_dev_opaque->buffer_ioctl_handler);
 	iio_dev_opaque->buffer_ioctl_handler = kzalloc(sz, GFP_KERNEL);
 	if (!iio_dev_opaque->buffer_ioctl_handler) {
 		ret = -ENOMEM;
@@ -1820,14 +1820,14 @@ void iio_buffers_free_sysfs_and_mask(struct iio_dev *indio_dev)
  * a time.
  */
 bool iio_validate_scan_mask_onehot(struct iio_dev *indio_dev,
-	const unsigned long *mask)
+				   const unsigned long *mask)
 {
 	return bitmap_weight(mask, indio_dev->masklength) == 1;
 }
 EXPORT_SYMBOL_GPL(iio_validate_scan_mask_onehot);
 
 static const void *iio_demux(struct iio_buffer *buffer,
-				 const void *datain)
+			     const void *datain)
 {
 	struct iio_demux_table *t;
 
diff --git a/drivers/iio/industrialio-trigger.c b/drivers/iio/industrialio-trigger.c
index 784dc1e00310..f207e36b12cc 100644
--- a/drivers/iio/industrialio-trigger.c
+++ b/drivers/iio/industrialio-trigger.c
@@ -322,7 +322,7 @@ int iio_trigger_attach_poll_func(struct iio_trigger *trig,
 	 * this is the case if the IIO device and the trigger device share the
 	 * same parent device.
 	 */
-	if (pf->indio_dev->dev.parent == trig->dev.parent)
+	if (iio_validate_own_trigger(pf->indio_dev, trig))
 		trig->attached_own_device = true;
 
 	return ret;
@@ -729,6 +729,26 @@ bool iio_trigger_using_own(struct iio_dev *indio_dev)
 EXPORT_SYMBOL(iio_trigger_using_own);
 
 /**
+ * iio_validate_own_trigger - Check if a trigger and IIO device belong to
+ *  the same device
+ * @idev: the IIO device to check
+ * @trig: the IIO trigger to check
+ *
+ * This function can be used as the validate_trigger callback for triggers that
+ * can only be attached to their own device.
+ *
+ * Return: 0 if both the trigger and the IIO device belong to the same
+ * device, -EINVAL otherwise.
+ */
+int iio_validate_own_trigger(struct iio_dev *idev, struct iio_trigger *trig)
+{
+	if (idev->dev.parent != trig->dev.parent)
+		return -EINVAL;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(iio_validate_own_trigger);
+
+/**
  * iio_trigger_validate_own_device - Check if a trigger and IIO device belong to
  *  the same device
  * @trig: The IIO trigger to check
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index 6fa31fcd71a1..45edba797e4c 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -289,6 +289,20 @@ config JSA1212
 	  To compile this driver as a module, choose M here:
 	  the module will be called jsa1212.
 
+config ROHM_BU27008
+	tristate "ROHM BU27008 color (RGB+C/IR) sensor"
+	depends on I2C
+	select REGMAP_I2C
+	select IIO_GTS_HELPER
+	help
+	  Enable support for the ROHM BU27008 color sensor.
+	  The ROHM BU27008 is a sensor with 5 photodiodes (red, green,
+	  blue, clear and IR) with four configurable channels. Red and
+	  green being always available and two out of the rest three
+	  (blue, clear, IR) can be selected to be simultaneously measured.
+	  Typical application is adjusting LCD backlight of TVs,
+	  mobile phones and tablet PCs.
+
 config ROHM_BU27034
 	tristate "ROHM BU27034 ambient light sensor"
 	depends on I2C
@@ -413,6 +427,17 @@ config OPT3001
 	  If built as a dynamically linked module, it will be called
 	  opt3001.
 
+config OPT4001
+	tristate "Texas Instruments OPT4001 Light Sensor"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  If you say Y or M here, you get support for Texas Instruments
+	  OPT4001 Ambient Light Sensor.
+
+	  If built as a dynamically linked module, it will be called
+	  opt4001.
+
 config PA12203001
 	tristate "TXC PA12203001 light and proximity sensor"
 	depends on I2C
diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
index 985f6feaccd4..c0db4c4c36ec 100644
--- a/drivers/iio/light/Makefile
+++ b/drivers/iio/light/Makefile
@@ -37,7 +37,9 @@ obj-$(CONFIG_MAX44000)		+= max44000.o
 obj-$(CONFIG_MAX44009)		+= max44009.o
 obj-$(CONFIG_NOA1305)		+= noa1305.o
 obj-$(CONFIG_OPT3001)		+= opt3001.o
+obj-$(CONFIG_OPT4001)		+= opt4001.o
 obj-$(CONFIG_PA12203001)	+= pa12203001.o
+obj-$(CONFIG_ROHM_BU27008)	+= rohm-bu27008.o
 obj-$(CONFIG_ROHM_BU27034)	+= rohm-bu27034.o
 obj-$(CONFIG_RPR0521)		+= rpr0521.o
 obj-$(CONFIG_SI1133)		+= si1133.o
diff --git a/drivers/iio/light/adjd_s311.c b/drivers/iio/light/adjd_s311.c
index 210a90f44c53..5fd775a20176 100644
--- a/drivers/iio/light/adjd_s311.c
+++ b/drivers/iio/light/adjd_s311.c
@@ -270,7 +270,7 @@ static struct i2c_driver adjd_s311_driver = {
 	.driver = {
 		.name	= ADJD_S311_DRV_NAME,
 	},
-	.probe_new	= adjd_s311_probe,
+	.probe		= adjd_s311_probe,
 	.id_table	= adjd_s311_id,
 };
 module_i2c_driver(adjd_s311_driver);
diff --git a/drivers/iio/light/adux1020.c b/drivers/iio/light/adux1020.c
index 606075350d01..aa4a6c78f0aa 100644
--- a/drivers/iio/light/adux1020.c
+++ b/drivers/iio/light/adux1020.c
@@ -837,7 +837,7 @@ static struct i2c_driver adux1020_driver = {
 		.name	= ADUX1020_DRV_NAME,
 		.of_match_table = adux1020_of_match,
 	},
-	.probe_new	= adux1020_probe,
+	.probe		= adux1020_probe,
 	.id_table	= adux1020_id,
 };
 module_i2c_driver(adux1020_driver);
diff --git a/drivers/iio/light/al3010.c b/drivers/iio/light/al3010.c
index 69cc723e2ac4..8f0119f392b7 100644
--- a/drivers/iio/light/al3010.c
+++ b/drivers/iio/light/al3010.c
@@ -229,7 +229,7 @@ static struct i2c_driver al3010_driver = {
 		.of_match_table = al3010_of_match,
 		.pm = pm_sleep_ptr(&al3010_pm_ops),
 	},
-	.probe_new	= al3010_probe,
+	.probe		= al3010_probe,
 	.id_table	= al3010_id,
 };
 module_i2c_driver(al3010_driver);
diff --git a/drivers/iio/light/al3320a.c b/drivers/iio/light/al3320a.c
index 9ff28bbf34bb..d5957d85c278 100644
--- a/drivers/iio/light/al3320a.c
+++ b/drivers/iio/light/al3320a.c
@@ -16,6 +16,7 @@
 #include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/mod_devicetable.h>
 
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
@@ -247,13 +248,20 @@ static const struct of_device_id al3320a_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, al3320a_of_match);
 
+static const struct acpi_device_id al3320a_acpi_match[] = {
+	{"CALS0001"},
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, al3320a_acpi_match);
+
 static struct i2c_driver al3320a_driver = {
 	.driver = {
 		.name = AL3320A_DRV_NAME,
 		.of_match_table = al3320a_of_match,
 		.pm = pm_sleep_ptr(&al3320a_pm_ops),
+		.acpi_match_table = al3320a_acpi_match,
 	},
-	.probe_new	= al3320a_probe,
+	.probe		= al3320a_probe,
 	.id_table	= al3320a_id,
 };
 
diff --git a/drivers/iio/light/apds9300.c b/drivers/iio/light/apds9300.c
index 15dfb753734f..0f978b30a232 100644
--- a/drivers/iio/light/apds9300.c
+++ b/drivers/iio/light/apds9300.c
@@ -504,7 +504,7 @@ static struct i2c_driver apds9300_driver = {
 		.name	= APDS9300_DRV_NAME,
 		.pm	= pm_sleep_ptr(&apds9300_pm_ops),
 	},
-	.probe_new	= apds9300_probe,
+	.probe		= apds9300_probe,
 	.remove		= apds9300_remove,
 	.id_table	= apds9300_id,
 };
diff --git a/drivers/iio/light/apds9960.c b/drivers/iio/light/apds9960.c
index cc5974a95bd3..1065a340b12b 100644
--- a/drivers/iio/light/apds9960.c
+++ b/drivers/iio/light/apds9960.c
@@ -1131,7 +1131,7 @@ static struct i2c_driver apds9960_driver = {
 		.pm	= &apds9960_pm_ops,
 		.acpi_match_table = apds9960_acpi_match,
 	},
-	.probe_new	= apds9960_probe,
+	.probe		= apds9960_probe,
 	.remove		= apds9960_remove,
 	.id_table	= apds9960_id,
 };
diff --git a/drivers/iio/light/as73211.c b/drivers/iio/light/as73211.c
index 2307fc531752..ec97a3a46839 100644
--- a/drivers/iio/light/as73211.c
+++ b/drivers/iio/light/as73211.c
@@ -790,7 +790,7 @@ static struct i2c_driver as73211_driver = {
 		.of_match_table = as73211_of_match,
 		.pm             = pm_sleep_ptr(&as73211_pm_ops),
 	},
-	.probe_new  = as73211_probe,
+	.probe      = as73211_probe,
 	.id_table   = as73211_id,
 };
 module_i2c_driver(as73211_driver);
diff --git a/drivers/iio/light/bh1750.c b/drivers/iio/light/bh1750.c
index 390c5b3ad4f6..4b869fa9e5b1 100644
--- a/drivers/iio/light/bh1750.c
+++ b/drivers/iio/light/bh1750.c
@@ -320,7 +320,7 @@ static struct i2c_driver bh1750_driver = {
 		.of_match_table = bh1750_of_match,
 		.pm = pm_sleep_ptr(&bh1750_pm_ops),
 	},
-	.probe_new = bh1750_probe,
+	.probe = bh1750_probe,
 	.remove = bh1750_remove,
 	.id_table = bh1750_id,
 
diff --git a/drivers/iio/light/bh1780.c b/drivers/iio/light/bh1780.c
index da9039e5a839..b84166c5fa06 100644
--- a/drivers/iio/light/bh1780.c
+++ b/drivers/iio/light/bh1780.c
@@ -269,7 +269,7 @@ static const struct of_device_id of_bh1780_match[] = {
 MODULE_DEVICE_TABLE(of, of_bh1780_match);
 
 static struct i2c_driver bh1780_driver = {
-	.probe_new	= bh1780_probe,
+	.probe		= bh1780_probe,
 	.remove		= bh1780_remove,
 	.id_table	= bh1780_id,
 	.driver = {
diff --git a/drivers/iio/light/cm32181.c b/drivers/iio/light/cm32181.c
index d4a34a3bf00d..9df85b3999fa 100644
--- a/drivers/iio/light/cm32181.c
+++ b/drivers/iio/light/cm32181.c
@@ -542,7 +542,7 @@ static struct i2c_driver cm32181_driver = {
 		.of_match_table = cm32181_of_match,
 		.pm = pm_sleep_ptr(&cm32181_pm_ops),
 	},
-	.probe_new	= cm32181_probe,
+	.probe		= cm32181_probe,
 };
 
 module_i2c_driver(cm32181_driver);
diff --git a/drivers/iio/light/cm3232.c b/drivers/iio/light/cm3232.c
index 43e492f5051d..d48a70efca69 100644
--- a/drivers/iio/light/cm3232.c
+++ b/drivers/iio/light/cm3232.c
@@ -417,7 +417,7 @@ static struct i2c_driver cm3232_driver = {
 		.pm	= pm_sleep_ptr(&cm3232_pm_ops),
 	},
 	.id_table	= cm3232_id,
-	.probe_new	= cm3232_probe,
+	.probe		= cm3232_probe,
 	.remove		= cm3232_remove,
 };
 
diff --git a/drivers/iio/light/cm3323.c b/drivers/iio/light/cm3323.c
index e5ce7d0fd272..35d20207a648 100644
--- a/drivers/iio/light/cm3323.c
+++ b/drivers/iio/light/cm3323.c
@@ -266,7 +266,7 @@ static struct i2c_driver cm3323_driver = {
 		.name = CM3323_DRV_NAME,
 		.of_match_table = cm3323_of_match,
 	},
-	.probe_new	= cm3323_probe,
+	.probe		= cm3323_probe,
 	.id_table	= cm3323_id,
 };
 
diff --git a/drivers/iio/light/cm36651.c b/drivers/iio/light/cm36651.c
index 1707dbf2ce26..97e559acba2b 100644
--- a/drivers/iio/light/cm36651.c
+++ b/drivers/iio/light/cm36651.c
@@ -730,7 +730,7 @@ static struct i2c_driver cm36651_driver = {
 		.name	= "cm36651",
 		.of_match_table = cm36651_of_match,
 	},
-	.probe_new	= cm36651_probe,
+	.probe		= cm36651_probe,
 	.remove		= cm36651_remove,
 	.id_table	= cm36651_id,
 };
diff --git a/drivers/iio/light/gp2ap002.c b/drivers/iio/light/gp2ap002.c
index c0430db0038a..fec10d5e037e 100644
--- a/drivers/iio/light/gp2ap002.c
+++ b/drivers/iio/light/gp2ap002.c
@@ -710,7 +710,7 @@ static struct i2c_driver gp2ap002_driver = {
 		.of_match_table = gp2ap002_of_match,
 		.pm = pm_ptr(&gp2ap002_dev_pm_ops),
 	},
-	.probe_new = gp2ap002_probe,
+	.probe = gp2ap002_probe,
 	.remove = gp2ap002_remove,
 	.id_table = gp2ap002_id_table,
 };
diff --git a/drivers/iio/light/gp2ap020a00f.c b/drivers/iio/light/gp2ap020a00f.c
index a5bf9da0d2f3..9f41724819b6 100644
--- a/drivers/iio/light/gp2ap020a00f.c
+++ b/drivers/iio/light/gp2ap020a00f.c
@@ -1609,7 +1609,7 @@ static struct i2c_driver gp2ap020a00f_driver = {
 		.name	= GP2A_I2C_NAME,
 		.of_match_table = gp2ap020a00f_of_match,
 	},
-	.probe_new	= gp2ap020a00f_probe,
+	.probe		= gp2ap020a00f_probe,
 	.remove		= gp2ap020a00f_remove,
 	.id_table	= gp2ap020a00f_id,
 };
diff --git a/drivers/iio/light/isl29018.c b/drivers/iio/light/isl29018.c
index 141845fb47f9..43484c18b101 100644
--- a/drivers/iio/light/isl29018.c
+++ b/drivers/iio/light/isl29018.c
@@ -865,7 +865,7 @@ static struct i2c_driver isl29018_driver = {
 			.pm = pm_sleep_ptr(&isl29018_pm_ops),
 			.of_match_table = isl29018_of_match,
 		    },
-	.probe_new = isl29018_probe,
+	.probe = isl29018_probe,
 	.id_table = isl29018_id,
 };
 module_i2c_driver(isl29018_driver);
diff --git a/drivers/iio/light/isl29028.c b/drivers/iio/light/isl29028.c
index bcf3a556e41a..5694683389be 100644
--- a/drivers/iio/light/isl29028.c
+++ b/drivers/iio/light/isl29028.c
@@ -698,7 +698,7 @@ static struct i2c_driver isl29028_driver = {
 		.pm = pm_ptr(&isl29028_pm_ops),
 		.of_match_table = isl29028_of_match,
 	},
-	.probe_new = isl29028_probe,
+	.probe = isl29028_probe,
 	.remove  = isl29028_remove,
 	.id_table = isl29028_id,
 };
diff --git a/drivers/iio/light/isl29125.c b/drivers/iio/light/isl29125.c
index b4bd656ca169..f1d3356d3369 100644
--- a/drivers/iio/light/isl29125.c
+++ b/drivers/iio/light/isl29125.c
@@ -337,7 +337,7 @@ static struct i2c_driver isl29125_driver = {
 		.name	= ISL29125_DRV_NAME,
 		.pm	= pm_sleep_ptr(&isl29125_pm_ops),
 	},
-	.probe_new	= isl29125_probe,
+	.probe		= isl29125_probe,
 	.remove		= isl29125_remove,
 	.id_table	= isl29125_id,
 };
diff --git a/drivers/iio/light/jsa1212.c b/drivers/iio/light/jsa1212.c
index d3834d0a0635..37e2807041a1 100644
--- a/drivers/iio/light/jsa1212.c
+++ b/drivers/iio/light/jsa1212.c
@@ -440,7 +440,7 @@ static struct i2c_driver jsa1212_driver = {
 		.pm	= pm_sleep_ptr(&jsa1212_pm_ops),
 		.acpi_match_table = ACPI_PTR(jsa1212_acpi_match),
 	},
-	.probe_new	= jsa1212_probe,
+	.probe		= jsa1212_probe,
 	.remove		= jsa1212_remove,
 	.id_table	= jsa1212_id,
 };
diff --git a/drivers/iio/light/ltr501.c b/drivers/iio/light/ltr501.c
index bdbd918213e4..061c122fdc5e 100644
--- a/drivers/iio/light/ltr501.c
+++ b/drivers/iio/light/ltr501.c
@@ -1641,7 +1641,7 @@ static struct i2c_driver ltr501_driver = {
 		.pm	= pm_sleep_ptr(&ltr501_pm_ops),
 		.acpi_match_table = ACPI_PTR(ltr_acpi_match),
 	},
-	.probe_new = ltr501_probe,
+	.probe = ltr501_probe,
 	.remove	= ltr501_remove,
 	.id_table = ltr501_id,
 };
diff --git a/drivers/iio/light/ltrf216a.c b/drivers/iio/light/ltrf216a.c
index 4b8ef36b6912..8de4dd849936 100644
--- a/drivers/iio/light/ltrf216a.c
+++ b/drivers/iio/light/ltrf216a.c
@@ -539,7 +539,7 @@ static struct i2c_driver ltrf216a_driver = {
 		.pm = pm_ptr(&ltrf216a_pm_ops),
 		.of_match_table = ltrf216a_of_match,
 	},
-	.probe_new = ltrf216a_probe,
+	.probe = ltrf216a_probe,
 	.id_table = ltrf216a_id,
 };
 module_i2c_driver(ltrf216a_driver);
diff --git a/drivers/iio/light/lv0104cs.c b/drivers/iio/light/lv0104cs.c
index c041fa0faa5d..a5445d58fddf 100644
--- a/drivers/iio/light/lv0104cs.c
+++ b/drivers/iio/light/lv0104cs.c
@@ -520,7 +520,7 @@ static struct i2c_driver lv0104cs_i2c_driver = {
 		.name	= "lv0104cs",
 	},
 	.id_table	= lv0104cs_id,
-	.probe_new	= lv0104cs_probe,
+	.probe		= lv0104cs_probe,
 };
 module_i2c_driver(lv0104cs_i2c_driver);
 
diff --git a/drivers/iio/light/max44000.c b/drivers/iio/light/max44000.c
index 5dcabc43a30e..db96c5b73100 100644
--- a/drivers/iio/light/max44000.c
+++ b/drivers/iio/light/max44000.c
@@ -616,7 +616,7 @@ static struct i2c_driver max44000_driver = {
 		.name	= MAX44000_DRV_NAME,
 		.acpi_match_table = ACPI_PTR(max44000_acpi_match),
 	},
-	.probe_new	= max44000_probe,
+	.probe		= max44000_probe,
 	.id_table	= max44000_id,
 };
 
diff --git a/drivers/iio/light/max44009.c b/drivers/iio/light/max44009.c
index 176dcad6e8e8..61ce276e86f7 100644
--- a/drivers/iio/light/max44009.c
+++ b/drivers/iio/light/max44009.c
@@ -544,7 +544,7 @@ static struct i2c_driver max44009_driver = {
 		.name = MAX44009_DRV_NAME,
 		.of_match_table = max44009_of_match,
 	},
-	.probe_new = max44009_probe,
+	.probe = max44009_probe,
 	.id_table = max44009_id,
 };
 module_i2c_driver(max44009_driver);
diff --git a/drivers/iio/light/noa1305.c b/drivers/iio/light/noa1305.c
index eaf548d4649e..1574310020e3 100644
--- a/drivers/iio/light/noa1305.c
+++ b/drivers/iio/light/noa1305.c
@@ -278,7 +278,7 @@ static struct i2c_driver noa1305_driver = {
 		.name		= NOA1305_DRIVER_NAME,
 		.of_match_table	= noa1305_of_match,
 	},
-	.probe_new	= noa1305_probe,
+	.probe		= noa1305_probe,
 	.id_table	= noa1305_ids,
 };
 
diff --git a/drivers/iio/light/opt3001.c b/drivers/iio/light/opt3001.c
index ec4f5c2369c4..cb41e5ee8ec1 100644
--- a/drivers/iio/light/opt3001.c
+++ b/drivers/iio/light/opt3001.c
@@ -834,7 +834,7 @@ static const struct of_device_id opt3001_of_match[] = {
 MODULE_DEVICE_TABLE(of, opt3001_of_match);
 
 static struct i2c_driver opt3001_driver = {
-	.probe_new = opt3001_probe,
+	.probe = opt3001_probe,
 	.remove = opt3001_remove,
 	.id_table = opt3001_id,
 
diff --git a/drivers/iio/light/opt4001.c b/drivers/iio/light/opt4001.c
new file mode 100644
index 000000000000..502946bf9f94
--- /dev/null
+++ b/drivers/iio/light/opt4001.c
@@ -0,0 +1,467 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Axis Communications AB
+ *
+ * Datasheet: https://www.ti.com/lit/gpn/opt4001
+ *
+ * Device driver for the Texas Instruments OPT4001.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/math64.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+
+/* OPT4001 register set */
+#define OPT4001_LIGHT1_MSB    0x00
+#define OPT4001_LIGHT1_LSB    0x01
+#define OPT4001_CTRL          0x0A
+#define OPT4001_DEVICE_ID     0x11
+
+/* OPT4001 register mask */
+#define OPT4001_EXPONENT_MASK    GENMASK(15, 12)
+#define OPT4001_MSB_MASK         GENMASK(11, 0)
+#define OPT4001_LSB_MASK         GENMASK(15, 8)
+#define OPT4001_COUNTER_MASK     GENMASK(7, 4)
+#define OPT4001_CRC_MASK         GENMASK(3, 0)
+
+/* OPT4001 device id mask */
+#define OPT4001_DEVICE_ID_MASK   GENMASK(11, 0)
+
+/* OPT4001 control registers mask */
+#define OPT4001_CTRL_QWAKE_MASK          GENMASK(15, 15)
+#define OPT4001_CTRL_RANGE_MASK          GENMASK(13, 10)
+#define OPT4001_CTRL_CONV_TIME_MASK      GENMASK(9, 6)
+#define OPT4001_CTRL_OPER_MODE_MASK      GENMASK(5, 4)
+#define OPT4001_CTRL_LATCH_MASK          GENMASK(3, 3)
+#define OPT4001_CTRL_INT_POL_MASK        GENMASK(2, 2)
+#define OPT4001_CTRL_FAULT_COUNT         GENMASK(0, 1)
+
+/* OPT4001 constants */
+#define OPT4001_DEVICE_ID_VAL            0x121
+
+/* OPT4001 operating modes */
+#define OPT4001_CTRL_OPER_MODE_OFF        0x0
+#define OPT4001_CTRL_OPER_MODE_FORCED     0x1
+#define OPT4001_CTRL_OPER_MODE_ONE_SHOT   0x2
+#define OPT4001_CTRL_OPER_MODE_CONTINUOUS 0x3
+
+/* OPT4001 conversion control register definitions */
+#define OPT4001_CTRL_CONVERSION_0_6MS   0x0
+#define OPT4001_CTRL_CONVERSION_1MS     0x1
+#define OPT4001_CTRL_CONVERSION_1_8MS   0x2
+#define OPT4001_CTRL_CONVERSION_3_4MS   0x3
+#define OPT4001_CTRL_CONVERSION_6_5MS   0x4
+#define OPT4001_CTRL_CONVERSION_12_7MS  0x5
+#define OPT4001_CTRL_CONVERSION_25MS    0x6
+#define OPT4001_CTRL_CONVERSION_50MS    0x7
+#define OPT4001_CTRL_CONVERSION_100MS   0x8
+#define OPT4001_CTRL_CONVERSION_200MS   0x9
+#define OPT4001_CTRL_CONVERSION_400MS   0xa
+#define OPT4001_CTRL_CONVERSION_800MS   0xb
+
+/* OPT4001 scale light level range definitions */
+#define OPT4001_CTRL_LIGHT_SCALE_AUTO   12
+
+/* OPT4001 default values */
+#define OPT4001_DEFAULT_CONVERSION_TIME OPT4001_CTRL_CONVERSION_800MS
+
+/*
+ * The different packaging of OPT4001 has different constants used when calculating
+ * lux values.
+ */
+struct opt4001_chip_info {
+	int mul;
+	int div;
+	const char *name;
+};
+
+struct opt4001_chip {
+	struct regmap *regmap;
+	struct i2c_client *client;
+	u8 int_time;
+	const struct opt4001_chip_info *chip_info;
+};
+
+static const struct opt4001_chip_info opt4001_sot_5x3_info = {
+	.mul = 4375,
+	.div = 10000000,
+	.name = "opt4001-sot-5x3"
+};
+
+static const struct opt4001_chip_info opt4001_picostar_info = {
+	.mul = 3125,
+	.div = 10000000,
+	.name = "opt4001-picostar"
+};
+
+static const int opt4001_int_time_available[][2] = {
+	{ 0,    600 },
+	{ 0,   1000 },
+	{ 0,   1800 },
+	{ 0,   3400 },
+	{ 0,   6500 },
+	{ 0,  12700 },
+	{ 0,  25000 },
+	{ 0,  50000 },
+	{ 0, 100000 },
+	{ 0, 200000 },
+	{ 0, 400000 },
+	{ 0, 800000 },
+};
+
+/*
+ * Conversion time is integration time + time to set register
+ * this is used as integration time.
+ */
+static const int opt4001_int_time_reg[][2] = {
+	{    600,  OPT4001_CTRL_CONVERSION_0_6MS  },
+	{   1000,  OPT4001_CTRL_CONVERSION_1MS    },
+	{   1800,  OPT4001_CTRL_CONVERSION_1_8MS  },
+	{   3400,  OPT4001_CTRL_CONVERSION_3_4MS  },
+	{   6500,  OPT4001_CTRL_CONVERSION_6_5MS  },
+	{  12700,  OPT4001_CTRL_CONVERSION_12_7MS },
+	{  25000,  OPT4001_CTRL_CONVERSION_25MS   },
+	{  50000,  OPT4001_CTRL_CONVERSION_50MS   },
+	{ 100000,  OPT4001_CTRL_CONVERSION_100MS  },
+	{ 200000,  OPT4001_CTRL_CONVERSION_200MS  },
+	{ 400000,  OPT4001_CTRL_CONVERSION_400MS  },
+	{ 800000,  OPT4001_CTRL_CONVERSION_800MS  },
+};
+
+static int opt4001_als_time_to_index(const u32 als_integration_time)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(opt4001_int_time_available); i++) {
+		if (als_integration_time == opt4001_int_time_available[i][1])
+			return i;
+	}
+
+	return -EINVAL;
+}
+
+static u8 opt4001_calculate_crc(u8 exp, u32 mantissa, u8 count)
+{
+	u8 crc;
+
+	crc = (hweight32(mantissa) + hweight32(exp) + hweight32(count)) % 2;
+	crc |= ((hweight32(mantissa & 0xAAAAA) + hweight32(exp & 0xA)
+		 + hweight32(count & 0xA)) % 2) << 1;
+	crc |= ((hweight32(mantissa & 0x88888) + hweight32(exp & 0x8)
+		 + hweight32(count & 0x8)) % 2) << 2;
+	crc |= (hweight32(mantissa & 0x80808) % 2) << 3;
+
+	return crc;
+}
+
+static int opt4001_read_lux_value(struct iio_dev *indio_dev,
+				  int *val, int *val2)
+{
+	struct opt4001_chip *chip = iio_priv(indio_dev);
+	struct device *dev = &chip->client->dev;
+	unsigned int light1;
+	unsigned int light2;
+	u16 msb;
+	u16 lsb;
+	u8 exp;
+	u8 count;
+	u8 crc;
+	u8 calc_crc;
+	u64 lux_raw;
+	int ret;
+
+	ret = regmap_read(chip->regmap, OPT4001_LIGHT1_MSB, &light1);
+	if (ret < 0) {
+		dev_err(dev, "Failed to read data bytes");
+		return ret;
+	}
+
+	ret = regmap_read(chip->regmap, OPT4001_LIGHT1_LSB, &light2);
+	if (ret < 0) {
+		dev_err(dev, "Failed to read data bytes");
+		return ret;
+	}
+
+	count = FIELD_GET(OPT4001_COUNTER_MASK, light2);
+	exp = FIELD_GET(OPT4001_EXPONENT_MASK, light1);
+	crc = FIELD_GET(OPT4001_CRC_MASK, light2);
+	msb = FIELD_GET(OPT4001_MSB_MASK, light1);
+	lsb = FIELD_GET(OPT4001_LSB_MASK, light2);
+	lux_raw = (msb << 8) + lsb;
+	calc_crc = opt4001_calculate_crc(exp, lux_raw, count);
+	if (calc_crc != crc)
+		return -EIO;
+
+	lux_raw = lux_raw << exp;
+	lux_raw = lux_raw * chip->chip_info->mul;
+	*val = div_u64_rem(lux_raw, chip->chip_info->div, val2);
+	*val2 = *val2 * 100;
+
+	return IIO_VAL_INT_PLUS_NANO;
+}
+
+static int opt4001_set_conf(struct opt4001_chip *chip)
+{
+	struct device *dev = &chip->client->dev;
+	u16 reg;
+	int ret;
+
+	reg = FIELD_PREP(OPT4001_CTRL_RANGE_MASK, OPT4001_CTRL_LIGHT_SCALE_AUTO);
+	reg |= FIELD_PREP(OPT4001_CTRL_CONV_TIME_MASK, chip->int_time);
+	reg |= FIELD_PREP(OPT4001_CTRL_OPER_MODE_MASK, OPT4001_CTRL_OPER_MODE_CONTINUOUS);
+
+	ret = regmap_write(chip->regmap, OPT4001_CTRL, reg);
+	if (ret)
+		dev_err(dev, "Failed to set configuration\n");
+
+	return ret;
+}
+
+static int opt4001_power_down(struct opt4001_chip *chip)
+{
+	struct device *dev = &chip->client->dev;
+	int ret;
+	unsigned int reg;
+
+	ret = regmap_read(chip->regmap, OPT4001_DEVICE_ID, &reg);
+	if (ret) {
+		dev_err(dev, "Failed to read configuration\n");
+		return ret;
+	}
+
+	/* MODE_OFF is 0x0 so just set bits to 0 */
+	reg &= ~OPT4001_CTRL_OPER_MODE_MASK;
+
+	ret = regmap_write(chip->regmap, OPT4001_CTRL, reg);
+	if (ret)
+		dev_err(dev, "Failed to set configuration to power down\n");
+
+	return ret;
+}
+
+static void opt4001_chip_off_action(void *data)
+{
+	struct opt4001_chip *chip = data;
+
+	opt4001_power_down(chip);
+}
+
+static const struct iio_chan_spec opt4001_channels[] = {
+	{
+		.type = IIO_LIGHT,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_INT_TIME),
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME)
+	},
+};
+
+static int opt4001_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int *val, int *val2, long mask)
+{
+	struct opt4001_chip *chip = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_PROCESSED:
+		return opt4001_read_lux_value(indio_dev, val, val2);
+	case IIO_CHAN_INFO_INT_TIME:
+		*val = 0;
+		*val2 = opt4001_int_time_reg[chip->int_time][0];
+		return IIO_VAL_INT_PLUS_MICRO;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int opt4001_write_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int val, int val2, long mask)
+{
+	struct opt4001_chip *chip = iio_priv(indio_dev);
+	int int_time;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_INT_TIME:
+		int_time = opt4001_als_time_to_index(val2);
+		if (int_time < 0)
+			return int_time;
+		chip->int_time = int_time;
+		return opt4001_set_conf(chip);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int opt4001_read_available(struct iio_dev *indio_dev,
+				  struct iio_chan_spec const *chan,
+				  const int **vals, int *type, int *length,
+				  long mask)
+{
+	switch (mask) {
+	case IIO_CHAN_INFO_INT_TIME:
+		*length = ARRAY_SIZE(opt4001_int_time_available) * 2;
+		*vals = (const int *)opt4001_int_time_available;
+		*type = IIO_VAL_INT_PLUS_MICRO;
+		return IIO_AVAIL_LIST;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info opt4001_info_no_irq = {
+	.read_raw = opt4001_read_raw,
+	.write_raw = opt4001_write_raw,
+	.read_avail = opt4001_read_available,
+};
+
+static int opt4001_load_defaults(struct opt4001_chip *chip)
+{
+	chip->int_time = OPT4001_DEFAULT_CONVERSION_TIME;
+
+	return opt4001_set_conf(chip);
+}
+
+static bool opt4001_readable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case OPT4001_LIGHT1_MSB:
+	case OPT4001_LIGHT1_LSB:
+	case OPT4001_CTRL:
+	case OPT4001_DEVICE_ID:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool opt4001_writable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case OPT4001_CTRL:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool opt4001_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case OPT4001_LIGHT1_MSB:
+	case OPT4001_LIGHT1_LSB:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config opt4001_regmap_config = {
+	.name = "opt4001",
+	.reg_bits = 8,
+	.val_bits = 16,
+	.cache_type = REGCACHE_RBTREE,
+	.max_register = OPT4001_DEVICE_ID,
+	.readable_reg = opt4001_readable_reg,
+	.writeable_reg = opt4001_writable_reg,
+	.volatile_reg = opt4001_volatile_reg,
+	.val_format_endian = REGMAP_ENDIAN_BIG,
+};
+
+static int opt4001_probe(struct i2c_client *client)
+{
+	struct opt4001_chip *chip;
+	struct iio_dev *indio_dev;
+	int ret;
+	uint dev_id;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	chip = iio_priv(indio_dev);
+
+	ret = devm_regulator_get_enable(&client->dev, "vdd");
+	if (ret)
+		return dev_err_probe(&client->dev, ret, "Failed to enable vdd supply\n");
+
+	chip->regmap = devm_regmap_init_i2c(client, &opt4001_regmap_config);
+	if (IS_ERR(chip->regmap))
+		return dev_err_probe(&client->dev, PTR_ERR(chip->regmap),
+				     "regmap initialization failed\n");
+	chip->client = client;
+
+	indio_dev->info = &opt4001_info_no_irq;
+
+	ret = regmap_reinit_cache(chip->regmap, &opt4001_regmap_config);
+	if (ret)
+		return dev_err_probe(&client->dev, ret,
+				     "failed to reinit regmap cache\n");
+
+	ret = regmap_read(chip->regmap, OPT4001_DEVICE_ID, &dev_id);
+	if (ret < 0)
+		return dev_err_probe(&client->dev, ret,
+			"Failed to read the device ID register\n");
+
+	dev_id = FIELD_GET(OPT4001_DEVICE_ID_MASK, dev_id);
+	if (dev_id != OPT4001_DEVICE_ID_VAL)
+		dev_warn(&client->dev, "Device ID: %#04x unknown\n", dev_id);
+
+	chip->chip_info = device_get_match_data(&client->dev);
+
+	indio_dev->channels = opt4001_channels;
+	indio_dev->num_channels = ARRAY_SIZE(opt4001_channels);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->name = chip->chip_info->name;
+
+	ret = opt4001_load_defaults(chip);
+	if (ret < 0)
+		return dev_err_probe(&client->dev, ret,
+				     "Failed to set sensor defaults\n");
+
+	ret = devm_add_action_or_reset(&client->dev,
+					opt4001_chip_off_action,
+					chip);
+	if (ret < 0)
+		return dev_err_probe(&client->dev, ret,
+				     "Failed to setup power off action\n");
+
+	return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+/*
+ * The compatible string determines which constants to use depending on
+ * opt4001 packaging
+ */
+static const struct i2c_device_id opt4001_id[] = {
+	{ "opt4001-sot-5x3", (kernel_ulong_t)&opt4001_sot_5x3_info },
+	{ "opt4001-picostar", (kernel_ulong_t)&opt4001_picostar_info },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, opt4001_id);
+
+static const struct of_device_id opt4001_of_match[] = {
+	{ .compatible = "ti,opt4001-sot-5x3", .data = &opt4001_sot_5x3_info},
+	{ .compatible = "ti,opt4001-picostar", .data = &opt4001_picostar_info},
+	{}
+};
+MODULE_DEVICE_TABLE(of, opt4001_of_match);
+
+static struct i2c_driver opt4001_driver = {
+	.driver = {
+		.name = "opt4001",
+		.of_match_table = opt4001_of_match,
+	},
+	.probe = opt4001_probe,
+	.id_table = opt4001_id,
+};
+module_i2c_driver(opt4001_driver);
+
+MODULE_AUTHOR("Stefan Windfeldt-Prytz <stefan.windfeldt-prytz@axis.com>");
+MODULE_DESCRIPTION("Texas Instruments opt4001 ambient light sensor driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/light/pa12203001.c b/drivers/iio/light/pa12203001.c
index 15a666f15c27..ed241598aefb 100644
--- a/drivers/iio/light/pa12203001.c
+++ b/drivers/iio/light/pa12203001.c
@@ -474,7 +474,7 @@ static struct i2c_driver pa12203001_driver = {
 		.pm = &pa12203001_pm_ops,
 		.acpi_match_table = ACPI_PTR(pa12203001_acpi_match),
 	},
-	.probe_new = pa12203001_probe,
+	.probe = pa12203001_probe,
 	.remove = pa12203001_remove,
 	.id_table = pa12203001_id,
 
diff --git a/drivers/iio/light/rohm-bu27008.c b/drivers/iio/light/rohm-bu27008.c
new file mode 100644
index 000000000000..489902bed7f0
--- /dev/null
+++ b/drivers/iio/light/rohm-bu27008.c
@@ -0,0 +1,1026 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * BU27008 ROHM Colour Sensor
+ *
+ * Copyright (c) 2023, ROHM Semiconductor.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/units.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/iio-gts-helper.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#define BU27008_REG_SYSTEM_CONTROL	0x40
+#define BU27008_MASK_SW_RESET		BIT(7)
+#define BU27008_MASK_PART_ID		GENMASK(5, 0)
+#define BU27008_ID			0x1a
+#define BU27008_REG_MODE_CONTROL1	0x41
+#define BU27008_MASK_MEAS_MODE		GENMASK(2, 0)
+#define BU27008_MASK_CHAN_SEL		GENMASK(3, 2)
+
+#define BU27008_REG_MODE_CONTROL2	0x42
+#define BU27008_MASK_RGBC_GAIN		GENMASK(7, 3)
+#define BU27008_MASK_IR_GAIN_LO		GENMASK(2, 0)
+#define BU27008_SHIFT_IR_GAIN		3
+
+#define BU27008_REG_MODE_CONTROL3	0x43
+#define BU27008_MASK_VALID		BIT(7)
+#define BU27008_MASK_INT_EN		BIT(1)
+#define BU27008_INT_EN			BU27008_MASK_INT_EN
+#define BU27008_INT_DIS			0
+#define BU27008_MASK_MEAS_EN		BIT(0)
+#define BU27008_MEAS_EN			BIT(0)
+#define BU27008_MEAS_DIS		0
+
+#define BU27008_REG_DATA0_LO		0x50
+#define BU27008_REG_DATA1_LO		0x52
+#define BU27008_REG_DATA2_LO		0x54
+#define BU27008_REG_DATA3_LO		0x56
+#define BU27008_REG_DATA3_HI		0x57
+#define BU27008_REG_MANUFACTURER_ID	0x92
+#define BU27008_REG_MAX BU27008_REG_MANUFACTURER_ID
+
+/**
+ * enum bu27008_chan_type - BU27008 channel types
+ * @BU27008_RED:	Red channel. Always via data0.
+ * @BU27008_GREEN:	Green channel. Always via data1.
+ * @BU27008_BLUE:	Blue channel. Via data2 (when used).
+ * @BU27008_CLEAR:	Clear channel. Via data2 or data3 (when used).
+ * @BU27008_IR:		IR channel. Via data3 (when used).
+ * @BU27008_NUM_CHANS:	Number of channel types.
+ */
+enum bu27008_chan_type {
+	BU27008_RED,
+	BU27008_GREEN,
+	BU27008_BLUE,
+	BU27008_CLEAR,
+	BU27008_IR,
+	BU27008_NUM_CHANS
+};
+
+/**
+ * enum bu27008_chan - BU27008 physical data channel
+ * @BU27008_DATA0:		Always red.
+ * @BU27008_DATA1:		Always green.
+ * @BU27008_DATA2:		Blue or clear.
+ * @BU27008_DATA3:		IR or clear.
+ * @BU27008_NUM_HW_CHANS:	Number of physical channels
+ */
+enum bu27008_chan {
+	BU27008_DATA0,
+	BU27008_DATA1,
+	BU27008_DATA2,
+	BU27008_DATA3,
+	BU27008_NUM_HW_CHANS
+};
+
+/* We can always measure red and green at same time */
+#define ALWAYS_SCANNABLE (BIT(BU27008_RED) | BIT(BU27008_GREEN))
+
+/* We use these data channel configs. Ensure scan_masks below follow them too */
+#define BU27008_BLUE2_CLEAR3		0x0 /* buffer is R, G, B, C */
+#define BU27008_CLEAR2_IR3		0x1 /* buffer is R, G, C, IR */
+#define BU27008_BLUE2_IR3		0x2 /* buffer is R, G, B, IR */
+
+static const unsigned long bu27008_scan_masks[] = {
+	/* buffer is R, G, B, C */
+	ALWAYS_SCANNABLE | BIT(BU27008_BLUE) | BIT(BU27008_CLEAR),
+	/* buffer is R, G, C, IR */
+	ALWAYS_SCANNABLE | BIT(BU27008_CLEAR) | BIT(BU27008_IR),
+	/* buffer is R, G, B, IR */
+	ALWAYS_SCANNABLE | BIT(BU27008_BLUE) | BIT(BU27008_IR),
+	0
+};
+
+/*
+ * Available scales with gain 1x - 1024x, timings 55, 100, 200, 400 mS
+ * Time impacts to gain: 1x, 2x, 4x, 8x.
+ *
+ * => Max total gain is HWGAIN * gain by integration time (8 * 1024) = 8192
+ *
+ * Max amplification is (HWGAIN * MAX integration-time multiplier) 1024 * 8
+ * = 8192. With NANO scale we get rid of accuracy loss when we start with the
+ * scale 16.0 for HWGAIN1, INT-TIME 55 mS. This way the nano scale for MAX
+ * total gain 8192 will be 1953125
+ */
+#define BU27008_SCALE_1X 16
+
+/* See the data sheet for the "Gain Setting" table */
+#define BU27008_GSEL_1X		0x00
+#define BU27008_GSEL_4X		0x08
+#define BU27008_GSEL_8X		0x09
+#define BU27008_GSEL_16X	0x0a
+#define BU27008_GSEL_32X	0x0b
+#define BU27008_GSEL_64X	0x0c
+#define BU27008_GSEL_256X	0x18
+#define BU27008_GSEL_512X	0x19
+#define BU27008_GSEL_1024X	0x1a
+
+static const struct iio_gain_sel_pair bu27008_gains[] = {
+	GAIN_SCALE_GAIN(1, BU27008_GSEL_1X),
+	GAIN_SCALE_GAIN(4, BU27008_GSEL_4X),
+	GAIN_SCALE_GAIN(8, BU27008_GSEL_8X),
+	GAIN_SCALE_GAIN(16, BU27008_GSEL_16X),
+	GAIN_SCALE_GAIN(32, BU27008_GSEL_32X),
+	GAIN_SCALE_GAIN(64, BU27008_GSEL_64X),
+	GAIN_SCALE_GAIN(256, BU27008_GSEL_256X),
+	GAIN_SCALE_GAIN(512, BU27008_GSEL_512X),
+	GAIN_SCALE_GAIN(1024, BU27008_GSEL_1024X),
+};
+
+static const struct iio_gain_sel_pair bu27008_gains_ir[] = {
+	GAIN_SCALE_GAIN(2, BU27008_GSEL_1X),
+	GAIN_SCALE_GAIN(4, BU27008_GSEL_4X),
+	GAIN_SCALE_GAIN(8, BU27008_GSEL_8X),
+	GAIN_SCALE_GAIN(16, BU27008_GSEL_16X),
+	GAIN_SCALE_GAIN(32, BU27008_GSEL_32X),
+	GAIN_SCALE_GAIN(64, BU27008_GSEL_64X),
+	GAIN_SCALE_GAIN(256, BU27008_GSEL_256X),
+	GAIN_SCALE_GAIN(512, BU27008_GSEL_512X),
+	GAIN_SCALE_GAIN(1024, BU27008_GSEL_1024X),
+};
+
+#define BU27008_MEAS_MODE_100MS		0x00
+#define BU27008_MEAS_MODE_55MS		0x01
+#define BU27008_MEAS_MODE_200MS		0x02
+#define BU27008_MEAS_MODE_400MS		0x04
+#define BU27008_MEAS_TIME_MAX_MS	400
+
+static const struct iio_itime_sel_mul bu27008_itimes[] = {
+	GAIN_SCALE_ITIME_US(400000, BU27008_MEAS_MODE_400MS, 8),
+	GAIN_SCALE_ITIME_US(200000, BU27008_MEAS_MODE_200MS, 4),
+	GAIN_SCALE_ITIME_US(100000, BU27008_MEAS_MODE_100MS, 2),
+	GAIN_SCALE_ITIME_US(55000, BU27008_MEAS_MODE_55MS, 1),
+};
+
+/*
+ * All the RGBC channels share the same gain.
+ * IR gain can be fine-tuned from the gain set for the RGBC by 2 bit, but this
+ * would yield quite complex gain setting. Especially since not all bit
+ * compinations are supported. And in any case setting GAIN for RGBC will
+ * always also change the IR-gain.
+ *
+ * On top of this, the selector '0' which corresponds to hw-gain 1X on RGBC,
+ * corresponds to gain 2X on IR. Rest of the selctors correspond to same gains
+ * though. This, however, makes it not possible to use shared gain for all
+ * RGBC and IR settings even though they are all changed at the one go.
+ */
+#define BU27008_CHAN(color, data, separate_avail)				\
+{										\
+	.type = IIO_INTENSITY,							\
+	.modified = 1,								\
+	.channel2 = IIO_MOD_LIGHT_##color,					\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |				\
+			      BIT(IIO_CHAN_INFO_SCALE),				\
+	.info_mask_separate_available = (separate_avail),			\
+	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME),			\
+	.info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_INT_TIME),	\
+	.address = BU27008_REG_##data##_LO,					\
+	.scan_index = BU27008_##color,						\
+	.scan_type = {								\
+		.sign = 's',							\
+		.realbits = 16,							\
+		.storagebits = 16,						\
+		.endianness = IIO_LE,						\
+	},									\
+}
+
+/* For raw reads we always configure DATA3 for CLEAR */
+static const struct iio_chan_spec bu27008_channels[] = {
+	BU27008_CHAN(RED, DATA0, BIT(IIO_CHAN_INFO_SCALE)),
+	BU27008_CHAN(GREEN, DATA1, BIT(IIO_CHAN_INFO_SCALE)),
+	BU27008_CHAN(BLUE, DATA2, BIT(IIO_CHAN_INFO_SCALE)),
+	BU27008_CHAN(CLEAR, DATA2, BIT(IIO_CHAN_INFO_SCALE)),
+	/*
+	 * We don't allow setting scale for IR (because of shared gain bits).
+	 * Hence we don't advertise available ones either.
+	 */
+	BU27008_CHAN(IR, DATA3, 0),
+	IIO_CHAN_SOFT_TIMESTAMP(BU27008_NUM_CHANS),
+};
+
+struct bu27008_data {
+	struct regmap *regmap;
+	struct iio_trigger *trig;
+	struct device *dev;
+	struct iio_gts gts;
+	struct iio_gts gts_ir;
+	int irq;
+
+	/*
+	 * Prevent changing gain/time config when scale is read/written.
+	 * Similarly, protect the integration_time read/change sequence.
+	 * Prevent changing gain/time when data is read.
+	 */
+	struct mutex mutex;
+};
+
+static const struct regmap_range bu27008_volatile_ranges[] = {
+	{
+		.range_min = BU27008_REG_SYSTEM_CONTROL,	/* SWRESET */
+		.range_max = BU27008_REG_SYSTEM_CONTROL,
+	}, {
+		.range_min = BU27008_REG_MODE_CONTROL3,		/* VALID */
+		.range_max = BU27008_REG_MODE_CONTROL3,
+	}, {
+		.range_min = BU27008_REG_DATA0_LO,		/* DATA */
+		.range_max = BU27008_REG_DATA3_HI,
+	},
+};
+
+static const struct regmap_access_table bu27008_volatile_regs = {
+	.yes_ranges = &bu27008_volatile_ranges[0],
+	.n_yes_ranges = ARRAY_SIZE(bu27008_volatile_ranges),
+};
+
+static const struct regmap_range bu27008_read_only_ranges[] = {
+	{
+		.range_min = BU27008_REG_DATA0_LO,
+		.range_max = BU27008_REG_DATA3_HI,
+	}, {
+		.range_min = BU27008_REG_MANUFACTURER_ID,
+		.range_max = BU27008_REG_MANUFACTURER_ID,
+	},
+};
+
+static const struct regmap_access_table bu27008_ro_regs = {
+	.no_ranges = &bu27008_read_only_ranges[0],
+	.n_no_ranges = ARRAY_SIZE(bu27008_read_only_ranges),
+};
+
+static const struct regmap_config bu27008_regmap = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = BU27008_REG_MAX,
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_table = &bu27008_volatile_regs,
+	.wr_table = &bu27008_ro_regs,
+	/*
+	 * All register writes are serialized by the mutex which protects the
+	 * scale setting/getting. This is needed because scale is combined by
+	 * gain and integration time settings and we need to ensure those are
+	 * not read / written when scale is being computed.
+	 *
+	 * As a result of this serializing, we don't need regmap locking. Note,
+	 * this is not true if we add any configurations which are not
+	 * serialized by the mutex and which may need for example a protected
+	 * read-modify-write cycle (eg. regmap_update_bits()). Please, revise
+	 * this when adding features to the driver.
+	 */
+	.disable_locking = true,
+};
+
+#define BU27008_MAX_VALID_RESULT_WAIT_US	50000
+#define BU27008_VALID_RESULT_WAIT_QUANTA_US	1000
+
+static int bu27008_chan_read_data(struct bu27008_data *data, int reg, int *val)
+{
+	int ret, valid;
+	__le16 tmp;
+
+	ret = regmap_read_poll_timeout(data->regmap, BU27008_REG_MODE_CONTROL3,
+				       valid, (valid & BU27008_MASK_VALID),
+				       BU27008_VALID_RESULT_WAIT_QUANTA_US,
+				       BU27008_MAX_VALID_RESULT_WAIT_US);
+	if (ret)
+		return ret;
+
+	ret = regmap_bulk_read(data->regmap, reg, &tmp, sizeof(tmp));
+	if (ret)
+		dev_err(data->dev, "Reading channel data failed\n");
+
+	*val = le16_to_cpu(tmp);
+
+	return ret;
+}
+
+static int bu27008_get_gain(struct bu27008_data *data, struct iio_gts *gts, int *gain)
+{
+	int ret, sel;
+
+	ret = regmap_read(data->regmap, BU27008_REG_MODE_CONTROL2, &sel);
+	if (ret)
+		return ret;
+
+	sel = FIELD_GET(BU27008_MASK_RGBC_GAIN, sel);
+
+	ret = iio_gts_find_gain_by_sel(gts, sel);
+	if (ret < 0) {
+		dev_err(data->dev, "unknown gain value 0x%x\n", sel);
+		return ret;
+	}
+
+	*gain = ret;
+
+	return 0;
+}
+
+static int bu27008_write_gain_sel(struct bu27008_data *data, int sel)
+{
+	int regval;
+
+	regval = FIELD_PREP(BU27008_MASK_RGBC_GAIN, sel);
+
+	/*
+	 * We do always set also the LOW bits of IR-gain because othervice we
+	 * would risk resulting an invalid GAIN register value.
+	 *
+	 * We could allow setting separate gains for RGBC and IR when the
+	 * values were such that HW could support both gain settings.
+	 * Eg, when the shared bits were same for both gain values.
+	 *
+	 * This, however, has a negligible benefit compared to the increased
+	 * software complexity when we would need to go through the gains
+	 * for both channels separately when the integration time changes.
+	 * This would end up with nasty logic for computing gain values for
+	 * both channels - and rejecting them if shared bits changed.
+	 *
+	 * We should then build the logic by guessing what a user prefers.
+	 * RGBC or IR gains correctly set while other jumps to odd value?
+	 * Maybe look-up a value where both gains are somehow optimized
+	 * <what this somehow is, is ATM unknown to us>. Or maybe user would
+	 * expect us to reject changes when optimal gains can't be set to both
+	 * channels w/given integration time. At best that would result
+	 * solution that works well for a very specific subset of
+	 * configurations but causes unexpected corner-cases.
+	 *
+	 * So, we keep it simple. Always set same selector to IR and RGBC.
+	 * We disallow setting IR (as I expect that most of the users are
+	 * interested in RGBC). This way we can show the user that the scales
+	 * for RGBC and IR channels are different (1X Vs 2X with sel 0) while
+	 * still keeping the operation deterministic.
+	 */
+	regval |= FIELD_PREP(BU27008_MASK_IR_GAIN_LO, sel);
+
+	return regmap_update_bits(data->regmap, BU27008_REG_MODE_CONTROL2,
+				  BU27008_MASK_RGBC_GAIN, regval);
+}
+
+static int bu27008_set_gain(struct bu27008_data *data, int gain)
+{
+	int ret;
+
+	ret = iio_gts_find_sel_by_gain(&data->gts, gain);
+	if (ret < 0)
+		return ret;
+
+	return bu27008_write_gain_sel(data, ret);
+}
+
+static int bu27008_get_int_time_sel(struct bu27008_data *data, int *sel)
+{
+	int ret, val;
+
+	ret = regmap_read(data->regmap, BU27008_REG_MODE_CONTROL1, &val);
+	*sel = FIELD_GET(BU27008_MASK_MEAS_MODE, val);
+
+	return ret;
+}
+
+static int bu27008_set_int_time_sel(struct bu27008_data *data, int sel)
+{
+	return regmap_update_bits(data->regmap, BU27008_REG_MODE_CONTROL1,
+				  BU27008_MASK_MEAS_MODE, sel);
+}
+
+static int bu27008_get_int_time_us(struct bu27008_data *data)
+{
+	int ret, sel;
+
+	ret = bu27008_get_int_time_sel(data, &sel);
+	if (ret)
+		return ret;
+
+	return iio_gts_find_int_time_by_sel(&data->gts, sel);
+}
+
+static int _bu27008_get_scale(struct bu27008_data *data, bool ir, int *val,
+			      int *val2)
+{
+	struct iio_gts *gts;
+	int gain, ret;
+
+	if (ir)
+		gts = &data->gts_ir;
+	else
+		gts = &data->gts;
+
+	ret = bu27008_get_gain(data, gts, &gain);
+	if (ret)
+		return ret;
+
+	ret = bu27008_get_int_time_us(data);
+	if (ret < 0)
+		return ret;
+
+	return iio_gts_get_scale(gts, gain, ret, val, val2);
+}
+
+static int bu27008_get_scale(struct bu27008_data *data, bool ir, int *val,
+			     int *val2)
+{
+	int ret;
+
+	mutex_lock(&data->mutex);
+	ret = _bu27008_get_scale(data, ir, val, val2);
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static int bu27008_set_int_time(struct bu27008_data *data, int time)
+{
+	int ret;
+
+	ret = iio_gts_find_sel_by_int_time(&data->gts, time);
+	if (ret < 0)
+		return ret;
+
+	return regmap_update_bits(data->regmap, BU27008_REG_MODE_CONTROL1,
+				  BU27008_MASK_MEAS_MODE, ret);
+}
+
+/* Try to change the time so that the scale is maintained */
+static int bu27008_try_set_int_time(struct bu27008_data *data, int int_time_new)
+{
+	int ret, old_time_sel, new_time_sel,  old_gain, new_gain;
+
+	mutex_lock(&data->mutex);
+
+	ret = bu27008_get_int_time_sel(data, &old_time_sel);
+	if (ret < 0)
+		goto unlock_out;
+
+	if (!iio_gts_valid_time(&data->gts, int_time_new)) {
+		dev_dbg(data->dev, "Unsupported integration time %u\n",
+			int_time_new);
+
+		ret = -EINVAL;
+		goto unlock_out;
+	}
+
+	/* If we already use requested time, then we're done */
+	new_time_sel = iio_gts_find_sel_by_int_time(&data->gts, int_time_new);
+	if (new_time_sel == old_time_sel)
+		goto unlock_out;
+
+	ret = bu27008_get_gain(data, &data->gts, &old_gain);
+	if (ret)
+		goto unlock_out;
+
+	ret = iio_gts_find_new_gain_sel_by_old_gain_time(&data->gts, old_gain,
+				old_time_sel, new_time_sel, &new_gain);
+	if (ret) {
+		int scale1, scale2;
+		bool ok;
+
+		_bu27008_get_scale(data, false, &scale1, &scale2);
+		dev_dbg(data->dev,
+			"Can't support time %u with current scale %u %u\n",
+			int_time_new, scale1, scale2);
+
+		if (new_gain < 0)
+			goto unlock_out;
+
+		/*
+		 * If caller requests for integration time change and we
+		 * can't support the scale - then the caller should be
+		 * prepared to 'pick up the pieces and deal with the
+		 * fact that the scale changed'.
+		 */
+		ret = iio_find_closest_gain_low(&data->gts, new_gain, &ok);
+		if (!ok)
+			dev_dbg(data->dev, "optimal gain out of range\n");
+
+		if (ret < 0) {
+			dev_dbg(data->dev,
+				 "Total gain increase. Risk of saturation");
+			ret = iio_gts_get_min_gain(&data->gts);
+			if (ret < 0)
+				goto unlock_out;
+		}
+		new_gain = ret;
+		dev_dbg(data->dev, "scale changed, new gain %u\n", new_gain);
+	}
+
+	ret = bu27008_set_gain(data, new_gain);
+	if (ret)
+		goto unlock_out;
+
+	ret = bu27008_set_int_time(data, int_time_new);
+
+unlock_out:
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static int bu27008_meas_set(struct bu27008_data *data, int state)
+{
+	return regmap_update_bits(data->regmap, BU27008_REG_MODE_CONTROL3,
+				  BU27008_MASK_MEAS_EN, state);
+}
+
+static int bu27008_chan_cfg(struct bu27008_data *data,
+			    struct iio_chan_spec const *chan)
+{
+	int chan_sel;
+
+	if (chan->scan_index == BU27008_BLUE)
+		chan_sel = BU27008_BLUE2_CLEAR3;
+	else
+		chan_sel = BU27008_CLEAR2_IR3;
+
+	chan_sel = FIELD_PREP(BU27008_MASK_CHAN_SEL, chan_sel);
+
+	return regmap_update_bits(data->regmap, BU27008_REG_MODE_CONTROL3,
+				  BU27008_MASK_CHAN_SEL, chan_sel);
+}
+
+static int bu27008_read_one(struct bu27008_data *data, struct iio_dev *idev,
+			    struct iio_chan_spec const *chan, int *val, int *val2)
+{
+	int ret, int_time;
+
+	ret = bu27008_chan_cfg(data, chan);
+	if (ret)
+		return ret;
+
+	ret = bu27008_meas_set(data, BU27008_MEAS_EN);
+	if (ret)
+		return ret;
+
+	ret = bu27008_get_int_time_us(data);
+	if (ret < 0)
+		int_time = BU27008_MEAS_TIME_MAX_MS;
+	else
+		int_time = ret / USEC_PER_MSEC;
+
+	msleep(int_time);
+
+	ret = bu27008_chan_read_data(data, chan->address, val);
+	if (!ret)
+		ret = IIO_VAL_INT;
+
+	if (bu27008_meas_set(data, BU27008_MEAS_DIS))
+		dev_warn(data->dev, "measurement disabling failed\n");
+
+	return ret;
+}
+
+static int bu27008_read_raw(struct iio_dev *idev,
+			   struct iio_chan_spec const *chan,
+			   int *val, int *val2, long mask)
+{
+	struct bu27008_data *data = iio_priv(idev);
+	int busy, ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		busy = iio_device_claim_direct_mode(idev);
+		if (busy)
+			return -EBUSY;
+
+		mutex_lock(&data->mutex);
+		ret = bu27008_read_one(data, idev, chan, val, val2);
+		mutex_unlock(&data->mutex);
+
+		iio_device_release_direct_mode(idev);
+
+		return ret;
+
+	case IIO_CHAN_INFO_SCALE:
+		ret = bu27008_get_scale(data, chan->scan_index == BU27008_IR,
+					val, val2);
+		if (ret)
+			return ret;
+
+		return IIO_VAL_INT_PLUS_NANO;
+
+	case IIO_CHAN_INFO_INT_TIME:
+		ret = bu27008_get_int_time_us(data);
+		if (ret < 0)
+			return ret;
+
+		*val = 0;
+		*val2 = ret;
+
+		return IIO_VAL_INT_PLUS_MICRO;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+/* Called if the new scale could not be supported with existing int-time */
+static int bu27008_try_find_new_time_gain(struct bu27008_data *data, int val,
+					  int val2, int *gain_sel)
+{
+	int i, ret, new_time_sel;
+
+	for (i = 0; i < data->gts.num_itime; i++) {
+		new_time_sel = data->gts.itime_table[i].sel;
+		ret = iio_gts_find_gain_sel_for_scale_using_time(&data->gts,
+					new_time_sel, val, val2 * 1000, gain_sel);
+		if (!ret)
+			break;
+	}
+	if (i == data->gts.num_itime) {
+		dev_err(data->dev, "Can't support scale %u %u\n", val, val2);
+
+		return -EINVAL;
+	}
+
+	return bu27008_set_int_time_sel(data, new_time_sel);
+}
+
+static int bu27008_set_scale(struct bu27008_data *data,
+			     struct iio_chan_spec const *chan,
+			     int val, int val2)
+{
+	int ret, gain_sel, time_sel;
+
+	if (chan->scan_index == BU27008_IR)
+		return -EINVAL;
+
+	mutex_lock(&data->mutex);
+
+	ret = bu27008_get_int_time_sel(data, &time_sel);
+	if (ret < 0)
+		goto unlock_out;
+
+	ret = iio_gts_find_gain_sel_for_scale_using_time(&data->gts, time_sel,
+						val, val2 * 1000, &gain_sel);
+	if (ret) {
+		ret = bu27008_try_find_new_time_gain(data, val, val2, &gain_sel);
+		if (ret)
+			goto unlock_out;
+
+	}
+	ret = bu27008_write_gain_sel(data, gain_sel);
+
+unlock_out:
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static int bu27008_write_raw(struct iio_dev *idev,
+			     struct iio_chan_spec const *chan,
+			     int val, int val2, long mask)
+{
+	struct bu27008_data *data = iio_priv(idev);
+	int ret;
+
+	/*
+	 * Do not allow changing scale when measurement is ongoing as doing so
+	 * could make values in the buffer inconsistent.
+	 */
+	ret = iio_device_claim_direct_mode(idev);
+	if (ret)
+		return ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		ret = bu27008_set_scale(data, chan, val, val2);
+		break;
+	case IIO_CHAN_INFO_INT_TIME:
+		if (val) {
+			ret = -EINVAL;
+			break;
+		}
+		ret = bu27008_try_set_int_time(data, val2);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	iio_device_release_direct_mode(idev);
+
+	return ret;
+}
+
+static int bu27008_read_avail(struct iio_dev *idev,
+			      struct iio_chan_spec const *chan, const int **vals,
+			      int *type, int *length, long mask)
+{
+	struct bu27008_data *data = iio_priv(idev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_INT_TIME:
+		return iio_gts_avail_times(&data->gts, vals, type, length);
+	case IIO_CHAN_INFO_SCALE:
+		if (chan->channel2 == IIO_MOD_LIGHT_IR)
+			return iio_gts_all_avail_scales(&data->gts_ir, vals,
+							type, length);
+		return iio_gts_all_avail_scales(&data->gts, vals, type, length);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int bu27008_update_scan_mode(struct iio_dev *idev,
+				    const unsigned long *scan_mask)
+{
+	struct bu27008_data *data = iio_priv(idev);
+	int chan_sel;
+
+	/* Configure channel selection */
+	if (test_bit(BU27008_BLUE, idev->active_scan_mask)) {
+		if (test_bit(BU27008_CLEAR, idev->active_scan_mask))
+			chan_sel = BU27008_BLUE2_CLEAR3;
+		else
+			chan_sel = BU27008_BLUE2_IR3;
+	} else {
+		chan_sel = BU27008_CLEAR2_IR3;
+	}
+
+	chan_sel = FIELD_PREP(BU27008_MASK_CHAN_SEL, chan_sel);
+
+	return regmap_update_bits(data->regmap, BU27008_REG_MODE_CONTROL3,
+				 BU27008_MASK_CHAN_SEL, chan_sel);
+}
+
+static const struct iio_info bu27008_info = {
+	.read_raw = &bu27008_read_raw,
+	.write_raw = &bu27008_write_raw,
+	.read_avail = &bu27008_read_avail,
+	.update_scan_mode = bu27008_update_scan_mode,
+	.validate_trigger = iio_validate_own_trigger,
+};
+
+static int bu27008_chip_init(struct bu27008_data *data)
+{
+	int ret;
+
+	ret = regmap_write_bits(data->regmap, BU27008_REG_SYSTEM_CONTROL,
+				BU27008_MASK_SW_RESET, BU27008_MASK_SW_RESET);
+	if (ret)
+		return dev_err_probe(data->dev, ret, "Sensor reset failed\n");
+
+	/*
+	 * The data-sheet does not tell how long performing the IC reset takes.
+	 * However, the data-sheet says the minimum time it takes the IC to be
+	 * able to take inputs after power is applied, is 100 uS. I'd assume
+	 * > 1 mS is enough.
+	 */
+	msleep(1);
+
+	ret = regmap_reinit_cache(data->regmap, &bu27008_regmap);
+	if (ret)
+		dev_err(data->dev, "Failed to reinit reg cache\n");
+
+	return ret;
+}
+
+static int bu27008_set_drdy_irq(struct bu27008_data *data, int state)
+{
+	return regmap_update_bits(data->regmap, BU27008_REG_MODE_CONTROL3,
+				 BU27008_MASK_INT_EN, state);
+}
+
+static int bu27008_trigger_set_state(struct iio_trigger *trig,
+				     bool state)
+{
+	struct bu27008_data *data = iio_trigger_get_drvdata(trig);
+	int ret;
+
+	if (state)
+		ret = bu27008_set_drdy_irq(data, BU27008_INT_EN);
+	else
+		ret = bu27008_set_drdy_irq(data, BU27008_INT_DIS);
+	if (ret)
+		dev_err(data->dev, "Failed to set trigger state\n");
+
+	return ret;
+}
+
+static void bu27008_trigger_reenable(struct iio_trigger *trig)
+{
+	struct bu27008_data *data = iio_trigger_get_drvdata(trig);
+
+	enable_irq(data->irq);
+}
+
+static const struct iio_trigger_ops bu27008_trigger_ops = {
+	.set_trigger_state = bu27008_trigger_set_state,
+	.reenable = bu27008_trigger_reenable,
+};
+
+static irqreturn_t bu27008_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *idev = pf->indio_dev;
+	struct bu27008_data *data = iio_priv(idev);
+	struct {
+		__le16 chan[BU27008_NUM_HW_CHANS];
+		s64 ts __aligned(8);
+	} raw;
+	int ret, dummy;
+
+	memset(&raw, 0, sizeof(raw));
+
+	/*
+	 * After some measurements, it seems reading the
+	 * BU27008_REG_MODE_CONTROL3 debounces the IRQ line
+	 */
+	ret = regmap_read(data->regmap, BU27008_REG_MODE_CONTROL3, &dummy);
+	if (ret < 0)
+		goto err_read;
+
+	ret = regmap_bulk_read(data->regmap, BU27008_REG_DATA0_LO, &raw.chan,
+			       sizeof(raw.chan));
+	if (ret < 0)
+		goto err_read;
+
+	iio_push_to_buffers_with_timestamp(idev, &raw, pf->timestamp);
+err_read:
+	iio_trigger_notify_done(idev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static int bu27008_buffer_preenable(struct iio_dev *idev)
+{
+	struct bu27008_data *data = iio_priv(idev);
+
+	return bu27008_meas_set(data, BU27008_MEAS_EN);
+}
+
+static int bu27008_buffer_postdisable(struct iio_dev *idev)
+{
+	struct bu27008_data *data = iio_priv(idev);
+
+	return bu27008_meas_set(data, BU27008_MEAS_DIS);
+}
+
+static const struct iio_buffer_setup_ops bu27008_buffer_ops = {
+	.preenable = bu27008_buffer_preenable,
+	.postdisable = bu27008_buffer_postdisable,
+};
+
+static irqreturn_t bu27008_data_rdy_poll(int irq, void *private)
+{
+	/*
+	 * The BU27008 keeps IRQ asserted until we read the VALID bit from
+	 * a register. We need to keep the IRQ disabled until then.
+	 */
+	disable_irq_nosync(irq);
+	iio_trigger_poll(private);
+
+	return IRQ_HANDLED;
+}
+
+static int bu27008_setup_trigger(struct bu27008_data *data, struct iio_dev *idev)
+{
+	struct iio_trigger *itrig;
+	char *name;
+	int ret;
+
+	ret = devm_iio_triggered_buffer_setup(data->dev, idev,
+					      &iio_pollfunc_store_time,
+					      bu27008_trigger_handler,
+					      &bu27008_buffer_ops);
+	if (ret)
+		return dev_err_probe(data->dev, ret,
+			     "iio_triggered_buffer_setup_ext FAIL\n");
+
+	itrig = devm_iio_trigger_alloc(data->dev, "%sdata-rdy-dev%d",
+				       idev->name, iio_device_id(idev));
+	if (!itrig)
+		return -ENOMEM;
+
+	data->trig = itrig;
+
+	itrig->ops = &bu27008_trigger_ops;
+	iio_trigger_set_drvdata(itrig, data);
+
+	name = devm_kasprintf(data->dev, GFP_KERNEL, "%s-bu27008",
+			      dev_name(data->dev));
+
+	ret = devm_request_irq(data->dev, data->irq,
+			       &bu27008_data_rdy_poll,
+			       0, name, itrig);
+	if (ret)
+		return dev_err_probe(data->dev, ret, "Could not request IRQ\n");
+
+	ret = devm_iio_trigger_register(data->dev, itrig);
+	if (ret)
+		return dev_err_probe(data->dev, ret,
+				     "Trigger registration failed\n");
+
+	/* set default trigger */
+	idev->trig = iio_trigger_get(itrig);
+
+	return 0;
+}
+
+static int bu27008_probe(struct i2c_client *i2c)
+{
+	struct device *dev = &i2c->dev;
+	struct bu27008_data *data;
+	struct regmap *regmap;
+	unsigned int part_id, reg;
+	struct iio_dev *idev;
+	int ret;
+
+	regmap = devm_regmap_init_i2c(i2c, &bu27008_regmap);
+	if (IS_ERR(regmap))
+		return dev_err_probe(dev, PTR_ERR(regmap),
+				     "Failed to initialize Regmap\n");
+
+	idev = devm_iio_device_alloc(dev, sizeof(*data));
+	if (!idev)
+		return -ENOMEM;
+
+	ret = devm_regulator_get_enable(dev, "vdd");
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to get regulator\n");
+
+	data = iio_priv(idev);
+
+	ret = regmap_read(regmap, BU27008_REG_SYSTEM_CONTROL, &reg);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to access sensor\n");
+
+	part_id = FIELD_GET(BU27008_MASK_PART_ID, reg);
+
+	if (part_id != BU27008_ID)
+		dev_warn(dev, "unknown device 0x%x\n", part_id);
+
+	ret = devm_iio_init_iio_gts(dev, BU27008_SCALE_1X, 0, bu27008_gains,
+				    ARRAY_SIZE(bu27008_gains), bu27008_itimes,
+				    ARRAY_SIZE(bu27008_itimes), &data->gts);
+	if (ret)
+		return ret;
+
+	ret = devm_iio_init_iio_gts(dev, BU27008_SCALE_1X, 0, bu27008_gains_ir,
+				    ARRAY_SIZE(bu27008_gains_ir), bu27008_itimes,
+				    ARRAY_SIZE(bu27008_itimes), &data->gts_ir);
+	if (ret)
+		return ret;
+
+	mutex_init(&data->mutex);
+	data->regmap = regmap;
+	data->dev = dev;
+	data->irq = i2c->irq;
+
+	idev->channels = bu27008_channels;
+	idev->num_channels = ARRAY_SIZE(bu27008_channels);
+	idev->name = "bu27008";
+	idev->info = &bu27008_info;
+	idev->modes = INDIO_DIRECT_MODE;
+	idev->available_scan_masks = bu27008_scan_masks;
+
+	ret = bu27008_chip_init(data);
+	if (ret)
+		return ret;
+
+	if (i2c->irq) {
+		ret = bu27008_setup_trigger(data, idev);
+		if (ret)
+			return ret;
+	} else {
+		dev_info(dev, "No IRQ, buffered mode disabled\n");
+	}
+
+	ret = devm_iio_device_register(dev, idev);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "Unable to register iio device\n");
+
+	return 0;
+}
+
+static const struct of_device_id bu27008_of_match[] = {
+	{ .compatible = "rohm,bu27008" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, bu27008_of_match);
+
+static struct i2c_driver bu27008_i2c_driver = {
+	.driver = {
+		.name = "bu27008",
+		.of_match_table = bu27008_of_match,
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+	.probe = bu27008_probe,
+};
+module_i2c_driver(bu27008_i2c_driver);
+
+MODULE_DESCRIPTION("ROHM BU27008 colour sensor driver");
+MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(IIO_GTS_HELPER);
diff --git a/drivers/iio/light/rohm-bu27034.c b/drivers/iio/light/rohm-bu27034.c
index f85194fda6b0..e63ef5789cde 100644
--- a/drivers/iio/light/rohm-bu27034.c
+++ b/drivers/iio/light/rohm-bu27034.c
@@ -1500,8 +1500,9 @@ static struct i2c_driver bu27034_i2c_driver = {
 	.driver = {
 		.name = "bu27034-als",
 		.of_match_table = bu27034_of_match,
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
 	},
-	.probe_new = bu27034_probe,
+	.probe = bu27034_probe,
 };
 module_i2c_driver(bu27034_i2c_driver);
 
diff --git a/drivers/iio/light/rpr0521.c b/drivers/iio/light/rpr0521.c
index 9d0218b7426e..bbb8581622f2 100644
--- a/drivers/iio/light/rpr0521.c
+++ b/drivers/iio/light/rpr0521.c
@@ -1121,7 +1121,7 @@ static struct i2c_driver rpr0521_driver = {
 		.pm	= pm_ptr(&rpr0521_pm_ops),
 		.acpi_match_table = ACPI_PTR(rpr0521_acpi_match),
 	},
-	.probe_new	= rpr0521_probe,
+	.probe		= rpr0521_probe,
 	.remove		= rpr0521_remove,
 	.id_table	= rpr0521_id,
 };
diff --git a/drivers/iio/light/si1133.c b/drivers/iio/light/si1133.c
index a08fbc8f5adb..ea2c437199c0 100644
--- a/drivers/iio/light/si1133.c
+++ b/drivers/iio/light/si1133.c
@@ -1064,7 +1064,7 @@ static struct i2c_driver si1133_driver = {
 	.driver = {
 	    .name   = "si1133",
 	},
-	.probe_new = si1133_probe,
+	.probe = si1133_probe,
 	.id_table = si1133_ids,
 };
 
diff --git a/drivers/iio/light/si1145.c b/drivers/iio/light/si1145.c
index f7126235f94c..77666b780a5c 100644
--- a/drivers/iio/light/si1145.c
+++ b/drivers/iio/light/si1145.c
@@ -1352,7 +1352,7 @@ static struct i2c_driver si1145_driver = {
 	.driver = {
 		.name   = "si1145",
 	},
-	.probe_new = si1145_probe,
+	.probe = si1145_probe,
 	.id_table = si1145_ids,
 };
 
diff --git a/drivers/iio/light/st_uvis25_i2c.c b/drivers/iio/light/st_uvis25_i2c.c
index 2160e87bb498..6bc2ddfb77ca 100644
--- a/drivers/iio/light/st_uvis25_i2c.c
+++ b/drivers/iio/light/st_uvis25_i2c.c
@@ -57,7 +57,7 @@ static struct i2c_driver st_uvis25_driver = {
 		.pm = pm_sleep_ptr(&st_uvis25_pm_ops),
 		.of_match_table = st_uvis25_i2c_of_match,
 	},
-	.probe_new = st_uvis25_i2c_probe,
+	.probe = st_uvis25_i2c_probe,
 	.id_table = st_uvis25_i2c_id_table,
 };
 module_i2c_driver(st_uvis25_driver);
diff --git a/drivers/iio/light/stk3310.c b/drivers/iio/light/stk3310.c
index 48ae6ff0015e..72b08d870d33 100644
--- a/drivers/iio/light/stk3310.c
+++ b/drivers/iio/light/stk3310.c
@@ -714,7 +714,7 @@ static struct i2c_driver stk3310_driver = {
 		.pm = pm_sleep_ptr(&stk3310_pm_ops),
 		.acpi_match_table = ACPI_PTR(stk3310_acpi_id),
 	},
-	.probe_new =        stk3310_probe,
+	.probe =        stk3310_probe,
 	.remove =           stk3310_remove,
 	.id_table =         stk3310_i2c_id,
 };
diff --git a/drivers/iio/light/tcs3414.c b/drivers/iio/light/tcs3414.c
index 5100732fbaf0..dcdd85b006be 100644
--- a/drivers/iio/light/tcs3414.c
+++ b/drivers/iio/light/tcs3414.c
@@ -373,7 +373,7 @@ static struct i2c_driver tcs3414_driver = {
 		.name	= TCS3414_DRV_NAME,
 		.pm	= pm_sleep_ptr(&tcs3414_pm_ops),
 	},
-	.probe_new	= tcs3414_probe,
+	.probe		= tcs3414_probe,
 	.id_table	= tcs3414_id,
 };
 module_i2c_driver(tcs3414_driver);
diff --git a/drivers/iio/light/tcs3472.c b/drivers/iio/light/tcs3472.c
index 6187c5487916..75fcf2c93717 100644
--- a/drivers/iio/light/tcs3472.c
+++ b/drivers/iio/light/tcs3472.c
@@ -609,7 +609,7 @@ static struct i2c_driver tcs3472_driver = {
 		.name	= TCS3472_DRV_NAME,
 		.pm	= pm_sleep_ptr(&tcs3472_pm_ops),
 	},
-	.probe_new	= tcs3472_probe,
+	.probe		= tcs3472_probe,
 	.remove		= tcs3472_remove,
 	.id_table	= tcs3472_id,
 };
diff --git a/drivers/iio/light/tsl2563.c b/drivers/iio/light/tsl2563.c
index f2f55239a072..1a6f514bced6 100644
--- a/drivers/iio/light/tsl2563.c
+++ b/drivers/iio/light/tsl2563.c
@@ -862,7 +862,7 @@ static struct i2c_driver tsl2563_i2c_driver = {
 		.of_match_table = tsl2563_of_match,
 		.pm	= pm_sleep_ptr(&tsl2563_pm_ops),
 	},
-	.probe_new	= tsl2563_probe,
+	.probe		= tsl2563_probe,
 	.remove		= tsl2563_remove,
 	.id_table	= tsl2563_id,
 };
diff --git a/drivers/iio/light/tsl2583.c b/drivers/iio/light/tsl2583.c
index a05f1c0453d1..02ad11611b9c 100644
--- a/drivers/iio/light/tsl2583.c
+++ b/drivers/iio/light/tsl2583.c
@@ -942,7 +942,7 @@ static struct i2c_driver tsl2583_driver = {
 		.of_match_table = tsl2583_of_match,
 	},
 	.id_table = tsl2583_idtable,
-	.probe_new = tsl2583_probe,
+	.probe = tsl2583_probe,
 	.remove = tsl2583_remove,
 };
 module_i2c_driver(tsl2583_driver);
diff --git a/drivers/iio/light/tsl2591.c b/drivers/iio/light/tsl2591.c
index e485a556e6da..7bdbfe72f0f0 100644
--- a/drivers/iio/light/tsl2591.c
+++ b/drivers/iio/light/tsl2591.c
@@ -1214,7 +1214,7 @@ static struct i2c_driver tsl2591_driver = {
 		.pm = pm_ptr(&tsl2591_pm_ops),
 		.of_match_table = tsl2591_of_match,
 	},
-	.probe_new = tsl2591_probe
+	.probe = tsl2591_probe
 };
 module_i2c_driver(tsl2591_driver);
 
diff --git a/drivers/iio/light/tsl2772.c b/drivers/iio/light/tsl2772.c
index e823c145f679..cab468a82b61 100644
--- a/drivers/iio/light/tsl2772.c
+++ b/drivers/iio/light/tsl2772.c
@@ -1932,7 +1932,7 @@ static struct i2c_driver tsl2772_driver = {
 		.pm = &tsl2772_pm_ops,
 	},
 	.id_table = tsl2772_idtable,
-	.probe_new = tsl2772_probe,
+	.probe = tsl2772_probe,
 };
 
 module_i2c_driver(tsl2772_driver);
diff --git a/drivers/iio/light/tsl4531.c b/drivers/iio/light/tsl4531.c
index d95397eb1526..4da7d78906d4 100644
--- a/drivers/iio/light/tsl4531.c
+++ b/drivers/iio/light/tsl4531.c
@@ -237,7 +237,7 @@ static struct i2c_driver tsl4531_driver = {
 		.name   = TSL4531_DRV_NAME,
 		.pm	= pm_sleep_ptr(&tsl4531_pm_ops),
 	},
-	.probe_new = tsl4531_probe,
+	.probe = tsl4531_probe,
 	.remove = tsl4531_remove,
 	.id_table = tsl4531_id,
 };
diff --git a/drivers/iio/light/us5182d.c b/drivers/iio/light/us5182d.c
index 8b2a0c99c8e6..61b3b2aea626 100644
--- a/drivers/iio/light/us5182d.c
+++ b/drivers/iio/light/us5182d.c
@@ -974,7 +974,7 @@ static struct i2c_driver us5182d_driver = {
 		.of_match_table = us5182d_of_match,
 		.acpi_match_table = ACPI_PTR(us5182d_acpi_match),
 	},
-	.probe_new = us5182d_probe,
+	.probe = us5182d_probe,
 	.remove = us5182d_remove,
 	.id_table = us5182d_id,
 
diff --git a/drivers/iio/light/vcnl4000.c b/drivers/iio/light/vcnl4000.c
index 56d3963d3d66..7c7362e28821 100644
--- a/drivers/iio/light/vcnl4000.c
+++ b/drivers/iio/light/vcnl4000.c
@@ -1500,7 +1500,7 @@ static struct i2c_driver vcnl4000_driver = {
 		.pm	= pm_ptr(&vcnl4000_pm_ops),
 		.of_match_table = vcnl_4000_of_match,
 	},
-	.probe_new = vcnl4000_probe,
+	.probe = vcnl4000_probe,
 	.id_table = vcnl4000_id,
 	.remove	= vcnl4000_remove,
 };
diff --git a/drivers/iio/light/vcnl4035.c b/drivers/iio/light/vcnl4035.c
index 94f5d611e98c..56bbefbc0ae6 100644
--- a/drivers/iio/light/vcnl4035.c
+++ b/drivers/iio/light/vcnl4035.c
@@ -670,7 +670,7 @@ static struct i2c_driver vcnl4035_driver = {
 		.pm	= pm_ptr(&vcnl4035_pm_ops),
 		.of_match_table = vcnl4035_of_match,
 	},
-	.probe_new = vcnl4035_probe,
+	.probe = vcnl4035_probe,
 	.remove	= vcnl4035_remove,
 	.id_table = vcnl4035_id,
 };
diff --git a/drivers/iio/light/veml6030.c b/drivers/iio/light/veml6030.c
index e7d2d5d177d4..043f233d9bdb 100644
--- a/drivers/iio/light/veml6030.c
+++ b/drivers/iio/light/veml6030.c
@@ -892,7 +892,7 @@ static struct i2c_driver veml6030_driver = {
 		.of_match_table = veml6030_of_match,
 		.pm = pm_ptr(&veml6030_pm_ops),
 	},
-	.probe_new = veml6030_probe,
+	.probe = veml6030_probe,
 	.id_table = veml6030_id,
 };
 module_i2c_driver(veml6030_driver);
diff --git a/drivers/iio/light/veml6070.c b/drivers/iio/light/veml6070.c
index ee76a68deb24..d99bf3ae0fe8 100644
--- a/drivers/iio/light/veml6070.c
+++ b/drivers/iio/light/veml6070.c
@@ -198,7 +198,7 @@ static struct i2c_driver veml6070_driver = {
 	.driver = {
 		.name   = VEML6070_DRV_NAME,
 	},
-	.probe_new = veml6070_probe,
+	.probe = veml6070_probe,
 	.remove  = veml6070_remove,
 	.id_table = veml6070_id,
 };
diff --git a/drivers/iio/light/vl6180.c b/drivers/iio/light/vl6180.c
index 8b56df26c59e..d4948dfc31ff 100644
--- a/drivers/iio/light/vl6180.c
+++ b/drivers/iio/light/vl6180.c
@@ -538,7 +538,7 @@ static struct i2c_driver vl6180_driver = {
 		.name   = VL6180_DRV_NAME,
 		.of_match_table = vl6180_of_match,
 	},
-	.probe_new = vl6180_probe,
+	.probe = vl6180_probe,
 	.id_table = vl6180_id,
 };
 
diff --git a/drivers/iio/light/zopt2201.c b/drivers/iio/light/zopt2201.c
index e3bac8b56380..d370193a4742 100644
--- a/drivers/iio/light/zopt2201.c
+++ b/drivers/iio/light/zopt2201.c
@@ -554,7 +554,7 @@ static struct i2c_driver zopt2201_driver = {
 	.driver = {
 		.name   = ZOPT2201_DRV_NAME,
 	},
-	.probe_new = zopt2201_probe,
+	.probe = zopt2201_probe,
 	.id_table = zopt2201_id,
 };
 
diff --git a/drivers/iio/magnetometer/ak8974.c b/drivers/iio/magnetometer/ak8974.c
index 45abdcce6bc0..c74d11943ec7 100644
--- a/drivers/iio/magnetometer/ak8974.c
+++ b/drivers/iio/magnetometer/ak8974.c
@@ -1046,7 +1046,7 @@ static struct i2c_driver ak8974_driver = {
 		.pm = pm_ptr(&ak8974_dev_pm_ops),
 		.of_match_table = ak8974_of_match,
 	},
-	.probe_new = ak8974_probe,
+	.probe = ak8974_probe,
 	.remove	  = ak8974_remove,
 	.id_table = ak8974_id,
 };
diff --git a/drivers/iio/magnetometer/ak8975.c b/drivers/iio/magnetometer/ak8975.c
index 924b481a3034..eb706d0bf70b 100644
--- a/drivers/iio/magnetometer/ak8975.c
+++ b/drivers/iio/magnetometer/ak8975.c
@@ -1110,7 +1110,7 @@ static struct i2c_driver ak8975_driver = {
 		.of_match_table = ak8975_of_match,
 		.acpi_match_table = ak_acpi_match,
 	},
-	.probe_new	= ak8975_probe,
+	.probe		= ak8975_probe,
 	.remove		= ak8975_remove,
 	.id_table	= ak8975_id,
 };
diff --git a/drivers/iio/magnetometer/bmc150_magn_i2c.c b/drivers/iio/magnetometer/bmc150_magn_i2c.c
index 44b8960eea17..281d1fa31c8e 100644
--- a/drivers/iio/magnetometer/bmc150_magn_i2c.c
+++ b/drivers/iio/magnetometer/bmc150_magn_i2c.c
@@ -71,7 +71,7 @@ static struct i2c_driver bmc150_magn_driver = {
 		.acpi_match_table = ACPI_PTR(bmc150_magn_acpi_match),
 		.pm	= &bmc150_magn_pm_ops,
 	},
-	.probe_new	= bmc150_magn_i2c_probe,
+	.probe		= bmc150_magn_i2c_probe,
 	.remove		= bmc150_magn_i2c_remove,
 	.id_table	= bmc150_magn_i2c_id,
 };
diff --git a/drivers/iio/magnetometer/hmc5843_i2c.c b/drivers/iio/magnetometer/hmc5843_i2c.c
index 7ef2b1d56289..bdd2784a9f86 100644
--- a/drivers/iio/magnetometer/hmc5843_i2c.c
+++ b/drivers/iio/magnetometer/hmc5843_i2c.c
@@ -95,7 +95,7 @@ static struct i2c_driver hmc5843_driver = {
 		.of_match_table = hmc5843_of_match,
 	},
 	.id_table	= hmc5843_id,
-	.probe_new	= hmc5843_i2c_probe,
+	.probe		= hmc5843_i2c_probe,
 	.remove		= hmc5843_i2c_remove,
 };
 module_i2c_driver(hmc5843_driver);
diff --git a/drivers/iio/magnetometer/mag3110.c b/drivers/iio/magnetometer/mag3110.c
index 661176a885ad..deffe3ca9004 100644
--- a/drivers/iio/magnetometer/mag3110.c
+++ b/drivers/iio/magnetometer/mag3110.c
@@ -641,7 +641,7 @@ static struct i2c_driver mag3110_driver = {
 		.of_match_table = mag3110_of_match,
 		.pm	= pm_sleep_ptr(&mag3110_pm_ops),
 	},
-	.probe_new = mag3110_probe,
+	.probe = mag3110_probe,
 	.remove = mag3110_remove,
 	.id_table = mag3110_id,
 };
diff --git a/drivers/iio/magnetometer/mmc35240.c b/drivers/iio/magnetometer/mmc35240.c
index 756dadbad106..b495b8a63928 100644
--- a/drivers/iio/magnetometer/mmc35240.c
+++ b/drivers/iio/magnetometer/mmc35240.c
@@ -575,7 +575,7 @@ static struct i2c_driver mmc35240_driver = {
 		.pm = pm_sleep_ptr(&mmc35240_pm_ops),
 		.acpi_match_table = ACPI_PTR(mmc35240_acpi_match),
 	},
-	.probe_new	= mmc35240_probe,
+	.probe		= mmc35240_probe,
 	.id_table	= mmc35240_id,
 };
 
diff --git a/drivers/iio/magnetometer/rm3100-i2c.c b/drivers/iio/magnetometer/rm3100-i2c.c
index ba669ab7113d..ac7276b3798c 100644
--- a/drivers/iio/magnetometer/rm3100-i2c.c
+++ b/drivers/iio/magnetometer/rm3100-i2c.c
@@ -45,7 +45,7 @@ static struct i2c_driver rm3100_driver = {
 		.name = "rm3100-i2c",
 		.of_match_table = rm3100_dt_match,
 	},
-	.probe_new = rm3100_probe,
+	.probe = rm3100_probe,
 };
 module_i2c_driver(rm3100_driver);
 
diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c
index 8faa7409d9e1..6cc0dfd31821 100644
--- a/drivers/iio/magnetometer/st_magn_core.c
+++ b/drivers/iio/magnetometer/st_magn_core.c
@@ -427,6 +427,7 @@ static const struct st_sensor_settings st_magn_sensors_settings[] = {
 		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
 		.sensors_supported = {
 			[0] = LSM9DS0_IMU_DEV_NAME,
+			[1] = LSM303D_IMU_DEV_NAME,
 		},
 		.ch = (struct iio_chan_spec *)st_magn_4_16bit_channels,
 		.odr = {
diff --git a/drivers/iio/magnetometer/st_magn_i2c.c b/drivers/iio/magnetometer/st_magn_i2c.c
index cc0e0e94b129..950826dd20bf 100644
--- a/drivers/iio/magnetometer/st_magn_i2c.c
+++ b/drivers/iio/magnetometer/st_magn_i2c.c
@@ -111,7 +111,7 @@ static struct i2c_driver st_magn_driver = {
 		.name = "st-magn-i2c",
 		.of_match_table = st_magn_of_match,
 	},
-	.probe_new = st_magn_i2c_probe,
+	.probe = st_magn_i2c_probe,
 	.id_table = st_magn_id_table,
 };
 module_i2c_driver(st_magn_driver);
diff --git a/drivers/iio/magnetometer/tmag5273.c b/drivers/iio/magnetometer/tmag5273.c
index e155a75b3cd2..c5e5c4ad681e 100644
--- a/drivers/iio/magnetometer/tmag5273.c
+++ b/drivers/iio/magnetometer/tmag5273.c
@@ -734,7 +734,7 @@ static struct i2c_driver tmag5273_driver = {
 		.of_match_table = tmag5273_of_match,
 		.pm = pm_ptr(&tmag5273_pm_ops),
 	},
-	.probe_new = tmag5273_probe,
+	.probe = tmag5273_probe,
 	.id_table = tmag5273_id,
 };
 module_i2c_driver(tmag5273_driver);
diff --git a/drivers/iio/magnetometer/yamaha-yas530.c b/drivers/iio/magnetometer/yamaha-yas530.c
index 753717158b07..c5e485bfc6fc 100644
--- a/drivers/iio/magnetometer/yamaha-yas530.c
+++ b/drivers/iio/magnetometer/yamaha-yas530.c
@@ -1605,7 +1605,7 @@ static struct i2c_driver yas5xx_driver = {
 		.of_match_table = yas5xx_of_match,
 		.pm = pm_ptr(&yas5xx_dev_pm_ops),
 	},
-	.probe_new = yas5xx_probe,
+	.probe = yas5xx_probe,
 	.remove	  = yas5xx_remove,
 	.id_table = yas5xx_id,
 };
diff --git a/drivers/iio/potentiometer/Kconfig b/drivers/iio/potentiometer/Kconfig
index 01dd3f858d99..e6a9a3c67845 100644
--- a/drivers/iio/potentiometer/Kconfig
+++ b/drivers/iio/potentiometer/Kconfig
@@ -136,4 +136,14 @@ config TPL0102
 	  To compile this driver as a module, choose M here: the
 	  module will be called tpl0102.
 
+config X9250
+	tristate "Renesas X9250 quad controlled potentiometers"
+	depends on SPI
+	help
+	  Enable support for the Renesas X9250 quad controlled
+	  potentiometers.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called x9250.
+
 endmenu
diff --git a/drivers/iio/potentiometer/Makefile b/drivers/iio/potentiometer/Makefile
index 5ebb8e3bbd76..d11fb739176c 100644
--- a/drivers/iio/potentiometer/Makefile
+++ b/drivers/iio/potentiometer/Makefile
@@ -15,3 +15,4 @@ obj-$(CONFIG_MCP4131) += mcp4131.o
 obj-$(CONFIG_MCP4531) += mcp4531.o
 obj-$(CONFIG_MCP41010) += mcp41010.o
 obj-$(CONFIG_TPL0102) += tpl0102.o
+obj-$(CONFIG_X9250) += x9250.o
diff --git a/drivers/iio/potentiometer/ad5110.c b/drivers/iio/potentiometer/ad5110.c
index 8fbcce482989..991e745c4f93 100644
--- a/drivers/iio/potentiometer/ad5110.c
+++ b/drivers/iio/potentiometer/ad5110.c
@@ -334,7 +334,7 @@ static struct i2c_driver ad5110_driver = {
 		.name	= "ad5110",
 		.of_match_table = ad5110_of_match,
 	},
-	.probe_new	= ad5110_probe,
+	.probe		= ad5110_probe,
 	.id_table	= ad5110_id,
 };
 module_i2c_driver(ad5110_driver);
diff --git a/drivers/iio/potentiometer/ad5272.c b/drivers/iio/potentiometer/ad5272.c
index aa140d632101..b17941e4c2f7 100644
--- a/drivers/iio/potentiometer/ad5272.c
+++ b/drivers/iio/potentiometer/ad5272.c
@@ -218,7 +218,7 @@ static struct i2c_driver ad5272_driver = {
 		.name	= "ad5272",
 		.of_match_table = ad5272_dt_ids,
 	},
-	.probe_new	= ad5272_probe,
+	.probe		= ad5272_probe,
 	.id_table	= ad5272_id,
 };
 
diff --git a/drivers/iio/potentiometer/ds1803.c b/drivers/iio/potentiometer/ds1803.c
index 0b5e475807cb..fc183e0790da 100644
--- a/drivers/iio/potentiometer/ds1803.c
+++ b/drivers/iio/potentiometer/ds1803.c
@@ -252,7 +252,7 @@ static struct i2c_driver ds1803_driver = {
 		.name	= "ds1803",
 		.of_match_table = ds1803_dt_ids,
 	},
-	.probe_new	= ds1803_probe,
+	.probe		= ds1803_probe,
 	.id_table	= ds1803_id,
 };
 
diff --git a/drivers/iio/potentiometer/max5432.c b/drivers/iio/potentiometer/max5432.c
index 94ef27ef3fb5..c8e2481dadb5 100644
--- a/drivers/iio/potentiometer/max5432.c
+++ b/drivers/iio/potentiometer/max5432.c
@@ -123,7 +123,7 @@ static struct i2c_driver max5432_driver = {
 		.name = "max5432",
 		.of_match_table = max5432_dt_ids,
 	},
-	.probe_new = max5432_probe,
+	.probe = max5432_probe,
 };
 
 module_i2c_driver(max5432_driver);
diff --git a/drivers/iio/potentiometer/mcp4018.c b/drivers/iio/potentiometer/mcp4018.c
index c0e171fec062..89daecc90305 100644
--- a/drivers/iio/potentiometer/mcp4018.c
+++ b/drivers/iio/potentiometer/mcp4018.c
@@ -174,7 +174,7 @@ static struct i2c_driver mcp4018_driver = {
 		.name	= "mcp4018",
 		.of_match_table = mcp4018_of_match,
 	},
-	.probe_new	= mcp4018_probe,
+	.probe		= mcp4018_probe,
 	.id_table	= mcp4018_id,
 };
 
diff --git a/drivers/iio/potentiometer/mcp4531.c b/drivers/iio/potentiometer/mcp4531.c
index c25f84b4a270..c513c00c8243 100644
--- a/drivers/iio/potentiometer/mcp4531.c
+++ b/drivers/iio/potentiometer/mcp4531.c
@@ -385,7 +385,7 @@ static struct i2c_driver mcp4531_driver = {
 		.name	= "mcp4531",
 		.of_match_table = mcp4531_of_match,
 	},
-	.probe_new	= mcp4531_probe,
+	.probe		= mcp4531_probe,
 	.id_table	= mcp4531_id,
 };
 
diff --git a/drivers/iio/potentiometer/tpl0102.c b/drivers/iio/potentiometer/tpl0102.c
index a3465b413b0c..8923ccb0fc4f 100644
--- a/drivers/iio/potentiometer/tpl0102.c
+++ b/drivers/iio/potentiometer/tpl0102.c
@@ -161,7 +161,7 @@ static struct i2c_driver tpl0102_driver = {
 	.driver = {
 		.name = "tpl0102",
 	},
-	.probe_new = tpl0102_probe,
+	.probe = tpl0102_probe,
 	.id_table = tpl0102_id,
 };
 
diff --git a/drivers/iio/potentiometer/x9250.c b/drivers/iio/potentiometer/x9250.c
new file mode 100644
index 000000000000..735348492699
--- /dev/null
+++ b/drivers/iio/potentiometer/x9250.c
@@ -0,0 +1,220 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *
+ * x9250.c  --  Renesas X9250 potentiometers IIO driver
+ *
+ * Copyright 2023 CS GROUP France
+ *
+ * Author: Herve Codina <herve.codina@bootlin.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/iio/iio.h>
+#include <linux/limits.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+
+struct x9250_cfg {
+	const char *name;
+	int kohms;
+};
+
+struct x9250 {
+	struct spi_device *spi;
+	const struct x9250_cfg *cfg;
+	struct gpio_desc *wp_gpio;
+};
+
+#define X9250_ID		0x50
+#define X9250_CMD_RD_WCR(_p)    (0x90 | (_p))
+#define X9250_CMD_WR_WCR(_p)    (0xa0 | (_p))
+
+static int x9250_write8(struct x9250 *x9250, u8 cmd, u8 val)
+{
+	u8 txbuf[3];
+
+	txbuf[0] = X9250_ID;
+	txbuf[1] = cmd;
+	txbuf[2] = val;
+
+	return spi_write_then_read(x9250->spi, txbuf, ARRAY_SIZE(txbuf), NULL, 0);
+}
+
+static int x9250_read8(struct x9250 *x9250, u8 cmd, u8 *val)
+{
+	u8 txbuf[2];
+
+	txbuf[0] = X9250_ID;
+	txbuf[1] = cmd;
+
+	return spi_write_then_read(x9250->spi, txbuf, ARRAY_SIZE(txbuf), val, 1);
+}
+
+#define X9250_CHANNEL(ch) {						\
+	.type = IIO_RESISTANCE,						\
+	.indexed = 1,							\
+	.output = 1,							\
+	.channel = (ch),						\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),			\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),		\
+	.info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_RAW),	\
+}
+
+static const struct iio_chan_spec x9250_channels[] = {
+	X9250_CHANNEL(0),
+	X9250_CHANNEL(1),
+	X9250_CHANNEL(2),
+	X9250_CHANNEL(3),
+};
+
+static int x9250_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan,
+			  int *val, int *val2, long mask)
+{
+	struct x9250 *x9250 = iio_priv(indio_dev);
+	int ch = chan->channel;
+	int ret;
+	u8 v;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = x9250_read8(x9250, X9250_CMD_RD_WCR(ch), &v);
+		if (ret)
+			return ret;
+		*val = v;
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_SCALE:
+		*val = 1000 * x9250->cfg->kohms;
+		*val2 = U8_MAX;
+		return IIO_VAL_FRACTIONAL;
+	}
+
+	return -EINVAL;
+}
+
+static int x9250_read_avail(struct iio_dev *indio_dev, struct iio_chan_spec const *chan,
+			    const int **vals, int *type, int *length, long mask)
+{
+	static const int range[] = {0, 1, 255}; /* min, step, max */
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		*length = ARRAY_SIZE(range);
+		*vals = range;
+		*type = IIO_VAL_INT;
+		return IIO_AVAIL_RANGE;
+	}
+
+	return -EINVAL;
+}
+
+static int x9250_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan,
+			   int val, int val2, long mask)
+{
+	struct x9250 *x9250 = iio_priv(indio_dev);
+	int ch = chan->channel;
+	int ret;
+
+	if (mask != IIO_CHAN_INFO_RAW)
+		return -EINVAL;
+
+	if (val > U8_MAX || val < 0)
+		return -EINVAL;
+
+	gpiod_set_value_cansleep(x9250->wp_gpio, 0);
+	ret = x9250_write8(x9250, X9250_CMD_WR_WCR(ch), val);
+	gpiod_set_value_cansleep(x9250->wp_gpio, 1);
+
+	return ret;
+}
+
+static const struct iio_info x9250_info = {
+	.read_raw = x9250_read_raw,
+	.read_avail = x9250_read_avail,
+	.write_raw = x9250_write_raw,
+};
+
+enum x9250_type {
+	X9250T,
+	X9250U,
+};
+
+static const struct x9250_cfg x9250_cfg[] = {
+	[X9250T] = { .name = "x9250t", .kohms =  100, },
+	[X9250U] = { .name = "x9250u", .kohms =  50, },
+};
+
+static const char *const x9250_regulator_names[] = {
+	"vcc",
+	"avp",
+	"avn",
+};
+
+static int x9250_probe(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev;
+	struct x9250 *x9250;
+	int ret;
+
+	ret = devm_regulator_bulk_get_enable(&spi->dev, ARRAY_SIZE(x9250_regulator_names),
+					     x9250_regulator_names);
+	if (ret)
+		return dev_err_probe(&spi->dev, ret, "Failed to get regulators\n");
+
+	/*
+	 * The x9250 needs a 5ms maximum delay after the power-supplies are set
+	 * before performing the first write (1ms for the first read).
+	 */
+	usleep_range(5000, 6000);
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*x9250));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	x9250 = iio_priv(indio_dev);
+	x9250->spi = spi;
+	x9250->cfg = spi_get_device_match_data(spi);
+	x9250->wp_gpio = devm_gpiod_get_optional(&spi->dev, "wp", GPIOD_OUT_LOW);
+	if (IS_ERR(x9250->wp_gpio))
+		return dev_err_probe(&spi->dev, PTR_ERR(x9250->wp_gpio),
+				     "failed to get wp gpio\n");
+
+	indio_dev->info = &x9250_info;
+	indio_dev->channels = x9250_channels;
+	indio_dev->num_channels = ARRAY_SIZE(x9250_channels);
+	indio_dev->name = x9250->cfg->name;
+
+	return devm_iio_device_register(&spi->dev, indio_dev);
+}
+
+static const struct of_device_id x9250_of_match[] = {
+	{ .compatible = "renesas,x9250t", .data = &x9250_cfg[X9250T]},
+	{ .compatible = "renesas,x9250u", .data = &x9250_cfg[X9250U]},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, x9250_of_match);
+
+static const struct spi_device_id x9250_id_table[] = {
+	{ "x9250t", (kernel_ulong_t)&x9250_cfg[X9250T] },
+	{ "x9250u", (kernel_ulong_t)&x9250_cfg[X9250U] },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, x9250_id_table);
+
+static struct spi_driver x9250_spi_driver = {
+	.driver  = {
+		.name = "x9250",
+		.of_match_table = x9250_of_match,
+	},
+	.id_table = x9250_id_table,
+	.probe  = x9250_probe,
+};
+
+module_spi_driver(x9250_spi_driver);
+
+MODULE_AUTHOR("Herve Codina <herve.codina@bootlin.com>");
+MODULE_DESCRIPTION("X9250 ALSA SoC driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/potentiostat/lmp91000.c b/drivers/iio/potentiostat/lmp91000.c
index 0083e858c21e..bd0f2c3bf2f2 100644
--- a/drivers/iio/potentiostat/lmp91000.c
+++ b/drivers/iio/potentiostat/lmp91000.c
@@ -416,7 +416,7 @@ static struct i2c_driver lmp91000_driver = {
 		.name = LMP91000_DRV_NAME,
 		.of_match_table = lmp91000_of_match,
 	},
-	.probe_new = lmp91000_probe,
+	.probe = lmp91000_probe,
 	.remove = lmp91000_remove,
 	.id_table = lmp91000_id,
 };
diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig
index 02b97e89de50..7b4c2af32852 100644
--- a/drivers/iio/pressure/Kconfig
+++ b/drivers/iio/pressure/Kconfig
@@ -148,6 +148,19 @@ config MPL3115
 	  To compile this driver as a module, choose M here: the module
 	  will be called mpl3115.
 
+config MPRLS0025PA
+	tristate "Honeywell MPRLS0025PA (MicroPressure sensors series)"
+	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Say Y here to build support for the Honeywell MicroPressure pressure
+	  sensor series. There are many different types with different pressure
+	  range. These ranges can be set up in the device tree.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called mprls0025pa.
+
 config MS5611
 	tristate "Measurement Specialties MS5611 pressure sensor driver"
 	select IIO_BUFFER
diff --git a/drivers/iio/pressure/Makefile b/drivers/iio/pressure/Makefile
index 083ae87ff48f..c90f77210e94 100644
--- a/drivers/iio/pressure/Makefile
+++ b/drivers/iio/pressure/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_MPL115) += mpl115.o
 obj-$(CONFIG_MPL115_I2C) += mpl115_i2c.o
 obj-$(CONFIG_MPL115_SPI) += mpl115_spi.o
 obj-$(CONFIG_MPL3115) += mpl3115.o
+obj-$(CONFIG_MPRLS0025PA) += mprls0025pa.o
 obj-$(CONFIG_MS5611) += ms5611_core.o
 obj-$(CONFIG_MS5611_I2C) += ms5611_i2c.o
 obj-$(CONFIG_MS5611_SPI) += ms5611_spi.o
diff --git a/drivers/iio/pressure/abp060mg.c b/drivers/iio/pressure/abp060mg.c
index c0140779366a..752a63c06b44 100644
--- a/drivers/iio/pressure/abp060mg.c
+++ b/drivers/iio/pressure/abp060mg.c
@@ -255,7 +255,7 @@ static struct i2c_driver abp060mg_driver = {
 	.driver = {
 		.name = "abp060mg",
 	},
-	.probe_new = abp060mg_probe,
+	.probe = abp060mg_probe,
 	.id_table = abp060mg_id_table,
 };
 module_i2c_driver(abp060mg_driver);
diff --git a/drivers/iio/pressure/bmp280-i2c.c b/drivers/iio/pressure/bmp280-i2c.c
index 567b945e6427..dbe630ad05b5 100644
--- a/drivers/iio/pressure/bmp280-i2c.c
+++ b/drivers/iio/pressure/bmp280-i2c.c
@@ -56,7 +56,7 @@ static struct i2c_driver bmp280_i2c_driver = {
 		.of_match_table = bmp280_of_i2c_match,
 		.pm = pm_ptr(&bmp280_dev_pm_ops),
 	},
-	.probe_new	= bmp280_i2c_probe,
+	.probe		= bmp280_i2c_probe,
 	.id_table	= bmp280_i2c_id,
 };
 module_i2c_driver(bmp280_i2c_driver);
diff --git a/drivers/iio/pressure/dlhl60d.c b/drivers/iio/pressure/dlhl60d.c
index 43650b048d62..28c8269ba65d 100644
--- a/drivers/iio/pressure/dlhl60d.c
+++ b/drivers/iio/pressure/dlhl60d.c
@@ -362,7 +362,7 @@ static struct i2c_driver dlh_driver = {
 		.name = "dlhl60d",
 		.of_match_table = dlh_of_match,
 	},
-	.probe_new = dlh_probe,
+	.probe = dlh_probe,
 	.id_table = dlh_id,
 };
 module_i2c_driver(dlh_driver);
diff --git a/drivers/iio/pressure/dps310.c b/drivers/iio/pressure/dps310.c
index 2af275a24ff9..b10dbf5cf494 100644
--- a/drivers/iio/pressure/dps310.c
+++ b/drivers/iio/pressure/dps310.c
@@ -887,7 +887,7 @@ static struct i2c_driver dps310_driver = {
 		.name = DPS310_DEV_NAME,
 		.acpi_match_table = dps310_acpi_match,
 	},
-	.probe_new = dps310_probe,
+	.probe = dps310_probe,
 	.id_table = dps310_id,
 };
 module_i2c_driver(dps310_driver);
diff --git a/drivers/iio/pressure/hp03.c b/drivers/iio/pressure/hp03.c
index bd1f71a99cfa..8bdb279129fa 100644
--- a/drivers/iio/pressure/hp03.c
+++ b/drivers/iio/pressure/hp03.c
@@ -282,7 +282,7 @@ static struct i2c_driver hp03_driver = {
 		.name	= "hp03",
 		.of_match_table = hp03_of_match,
 	},
-	.probe_new	= hp03_probe,
+	.probe		= hp03_probe,
 	.id_table	= hp03_id,
 };
 module_i2c_driver(hp03_driver);
diff --git a/drivers/iio/pressure/hp206c.c b/drivers/iio/pressure/hp206c.c
index b6d2ff464341..a072de6cb59c 100644
--- a/drivers/iio/pressure/hp206c.c
+++ b/drivers/iio/pressure/hp206c.c
@@ -409,7 +409,7 @@ MODULE_DEVICE_TABLE(acpi, hp206c_acpi_match);
 #endif
 
 static struct i2c_driver hp206c_driver = {
-	.probe_new = hp206c_probe,
+	.probe = hp206c_probe,
 	.id_table = hp206c_id,
 	.driver = {
 		.name = "hp206c",
diff --git a/drivers/iio/pressure/icp10100.c b/drivers/iio/pressure/icp10100.c
index 407cf25ea0e3..2086f3ef338f 100644
--- a/drivers/iio/pressure/icp10100.c
+++ b/drivers/iio/pressure/icp10100.c
@@ -648,7 +648,7 @@ static struct i2c_driver icp10100_driver = {
 		.pm = pm_ptr(&icp10100_pm),
 		.of_match_table = icp10100_of_match,
 	},
-	.probe_new = icp10100_probe,
+	.probe = icp10100_probe,
 	.id_table = icp10100_id,
 };
 module_i2c_driver(icp10100_driver);
diff --git a/drivers/iio/pressure/mpl115_i2c.c b/drivers/iio/pressure/mpl115_i2c.c
index ade4dd854ddf..fcbdadf4a511 100644
--- a/drivers/iio/pressure/mpl115_i2c.c
+++ b/drivers/iio/pressure/mpl115_i2c.c
@@ -55,7 +55,7 @@ static struct i2c_driver mpl115_i2c_driver = {
 		.name	= "mpl115",
 		.pm = pm_ptr(&mpl115_dev_pm_ops),
 	},
-	.probe_new = mpl115_i2c_probe,
+	.probe = mpl115_i2c_probe,
 	.id_table = mpl115_i2c_id,
 };
 module_i2c_driver(mpl115_i2c_driver);
diff --git a/drivers/iio/pressure/mpl3115.c b/drivers/iio/pressure/mpl3115.c
index 72e811a5c96e..7aa19584c340 100644
--- a/drivers/iio/pressure/mpl3115.c
+++ b/drivers/iio/pressure/mpl3115.c
@@ -335,7 +335,7 @@ static struct i2c_driver mpl3115_driver = {
 		.of_match_table = mpl3115_of_match,
 		.pm	= pm_sleep_ptr(&mpl3115_pm_ops),
 	},
-	.probe_new = mpl3115_probe,
+	.probe = mpl3115_probe,
 	.remove = mpl3115_remove,
 	.id_table = mpl3115_id,
 };
diff --git a/drivers/iio/pressure/mprls0025pa.c b/drivers/iio/pressure/mprls0025pa.c
new file mode 100644
index 000000000000..30fb2de36821
--- /dev/null
+++ b/drivers/iio/pressure/mprls0025pa.c
@@ -0,0 +1,450 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MPRLS0025PA - Honeywell MicroPressure pressure sensor series driver
+ *
+ * Copyright (c) Andreas Klinger <ak@it-klinger.de>
+ *
+ * Data sheet:
+ *  https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/
+ *    products/sensors/pressure-sensors/board-mount-pressure-sensors/
+ *    micropressure-mpr-series/documents/
+ *    sps-siot-mpr-series-datasheet-32332628-ciid-172626.pdf
+ *
+ * 7-bit I2C default slave address: 0x18
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/math64.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/units.h>
+
+#include <linux/gpio/consumer.h>
+
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#include <linux/regulator/consumer.h>
+
+#include <asm/unaligned.h>
+
+/* bits in i2c status byte */
+#define MPR_I2C_POWER	BIT(6)	/* device is powered */
+#define MPR_I2C_BUSY	BIT(5)	/* device is busy */
+#define MPR_I2C_MEMORY	BIT(2)	/* integrity test passed */
+#define MPR_I2C_MATH	BIT(0)	/* internal math saturation */
+
+/*
+ * support _RAW sysfs interface:
+ *
+ * Calculation formula from the datasheet:
+ * pressure = (press_cnt - outputmin) * scale + pmin
+ * with:
+ * * pressure	- measured pressure in Pascal
+ * * press_cnt	- raw value read from sensor
+ * * pmin	- minimum pressure range value of sensor (data->pmin)
+ * * pmax	- maximum pressure range value of sensor (data->pmax)
+ * * outputmin	- minimum numerical range raw value delivered by sensor
+ *						(mpr_func_spec.output_min)
+ * * outputmax	- maximum numerical range raw value delivered by sensor
+ *						(mpr_func_spec.output_max)
+ * * scale	- (pmax - pmin) / (outputmax - outputmin)
+ *
+ * formula of the userspace:
+ * pressure = (raw + offset) * scale
+ *
+ * Values given to the userspace in sysfs interface:
+ * * raw	- press_cnt
+ * * offset	- (-1 * outputmin) - pmin / scale
+ *                note: With all sensors from the datasheet pmin = 0
+ *                which reduces the offset to (-1 * outputmin)
+ */
+
+/*
+ * transfer function A: 10%   to 90%   of 2^24
+ * transfer function B:  2.5% to 22.5% of 2^24
+ * transfer function C: 20%   to 80%   of 2^24
+ */
+enum mpr_func_id {
+	MPR_FUNCTION_A,
+	MPR_FUNCTION_B,
+	MPR_FUNCTION_C,
+};
+
+struct mpr_func_spec {
+	u32			output_min;
+	u32			output_max;
+};
+
+static const struct mpr_func_spec mpr_func_spec[] = {
+	[MPR_FUNCTION_A] = {.output_min = 1677722, .output_max = 15099494},
+	[MPR_FUNCTION_B] = {.output_min =  419430, .output_max =  3774874},
+	[MPR_FUNCTION_C] = {.output_min = 3355443, .output_max = 13421773},
+};
+
+struct mpr_chan {
+	s32			pres;		/* pressure value */
+	s64			ts;		/* timestamp */
+};
+
+struct mpr_data {
+	struct i2c_client	*client;
+	struct mutex		lock;		/*
+						 * access to device during read
+						 */
+	u32			pmin;		/* minimal pressure in pascal */
+	u32			pmax;		/* maximal pressure in pascal */
+	enum mpr_func_id	function;	/* transfer function */
+	u32			outmin;		/*
+						 * minimal numerical range raw
+						 * value from sensor
+						 */
+	u32			outmax;		/*
+						 * maximal numerical range raw
+						 * value from sensor
+						 */
+	int                     scale;          /* int part of scale */
+	int                     scale2;         /* nano part of scale */
+	int                     offset;         /* int part of offset */
+	int                     offset2;        /* nano part of offset */
+	struct gpio_desc	*gpiod_reset;	/* reset */
+	int			irq;		/*
+						 * end of conversion irq;
+						 * used to distinguish between
+						 * irq mode and reading in a
+						 * loop until data is ready
+						 */
+	struct completion	completion;	/* handshake from irq to read */
+	struct mpr_chan		chan;		/*
+						 * channel values for buffered
+						 * mode
+						 */
+};
+
+static const struct iio_chan_spec mpr_channels[] = {
+	{
+		.type = IIO_PRESSURE,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+					BIT(IIO_CHAN_INFO_SCALE) |
+					BIT(IIO_CHAN_INFO_OFFSET),
+		.scan_index = 0,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 32,
+			.storagebits = 32,
+			.endianness = IIO_CPU,
+		},
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(1),
+};
+
+static void mpr_reset(struct mpr_data *data)
+{
+	if (data->gpiod_reset) {
+		gpiod_set_value(data->gpiod_reset, 0);
+		udelay(10);
+		gpiod_set_value(data->gpiod_reset, 1);
+	}
+}
+
+/**
+ * mpr_read_pressure() - Read pressure value from sensor via I2C
+ * @data: Pointer to private data struct.
+ * @press: Output value read from sensor.
+ *
+ * Reading from the sensor by sending and receiving I2C telegrams.
+ *
+ * If there is an end of conversion (EOC) interrupt registered the function
+ * waits for a maximum of one second for the interrupt.
+ *
+ * Context: The function can sleep and data->lock should be held when calling it
+ * Return:
+ * * 0		- OK, the pressure value could be read
+ * * -ETIMEDOUT	- Timeout while waiting for the EOC interrupt or busy flag is
+ *		  still set after nloops attempts of reading
+ */
+static int mpr_read_pressure(struct mpr_data *data, s32 *press)
+{
+	struct device *dev = &data->client->dev;
+	int ret, i;
+	u8 wdata[] = {0xAA, 0x00, 0x00};
+	s32 status;
+	int nloops = 10;
+	u8 buf[4];
+
+	reinit_completion(&data->completion);
+
+	ret = i2c_master_send(data->client, wdata, sizeof(wdata));
+	if (ret < 0) {
+		dev_err(dev, "error while writing ret: %d\n", ret);
+		return ret;
+	}
+	if (ret != sizeof(wdata)) {
+		dev_err(dev, "received size doesn't fit - ret: %d / %u\n", ret,
+							(u32)sizeof(wdata));
+		return -EIO;
+	}
+
+	if (data->irq > 0) {
+		ret = wait_for_completion_timeout(&data->completion, HZ);
+		if (!ret) {
+			dev_err(dev, "timeout while waiting for eoc irq\n");
+			return -ETIMEDOUT;
+		}
+	} else {
+		/* wait until status indicates data is ready */
+		for (i = 0; i < nloops; i++) {
+			/*
+			 * datasheet only says to wait at least 5 ms for the
+			 * data but leave the maximum response time open
+			 * --> let's try it nloops (10) times which seems to be
+			 *     quite long
+			 */
+			usleep_range(5000, 10000);
+			status = i2c_smbus_read_byte(data->client);
+			if (status < 0) {
+				dev_err(dev,
+					"error while reading, status: %d\n",
+					status);
+				return status;
+			}
+			if (!(status & MPR_I2C_BUSY))
+				break;
+		}
+		if (i == nloops) {
+			dev_err(dev, "timeout while reading\n");
+			return -ETIMEDOUT;
+		}
+	}
+
+	ret = i2c_master_recv(data->client, buf, sizeof(buf));
+	if (ret < 0) {
+		dev_err(dev, "error in i2c_master_recv ret: %d\n", ret);
+		return ret;
+	}
+	if (ret != sizeof(buf)) {
+		dev_err(dev, "received size doesn't fit - ret: %d / %u\n", ret,
+							(u32)sizeof(buf));
+		return -EIO;
+	}
+
+	if (buf[0] & MPR_I2C_BUSY) {
+		/*
+		 * it should never be the case that status still indicates
+		 * business
+		 */
+		dev_err(dev, "data still not ready: %08x\n", buf[0]);
+		return -ETIMEDOUT;
+	}
+
+	*press = get_unaligned_be24(&buf[1]);
+
+	dev_dbg(dev, "received: %*ph cnt: %d\n", ret, buf, *press);
+
+	return 0;
+}
+
+static irqreturn_t mpr_eoc_handler(int irq, void *p)
+{
+	struct mpr_data *data = p;
+
+	complete(&data->completion);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t mpr_trigger_handler(int irq, void *p)
+{
+	int ret;
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct mpr_data *data = iio_priv(indio_dev);
+
+	mutex_lock(&data->lock);
+	ret = mpr_read_pressure(data, &data->chan.pres);
+	if (ret < 0)
+		goto err;
+
+	iio_push_to_buffers_with_timestamp(indio_dev, &data->chan,
+						iio_get_time_ns(indio_dev));
+
+err:
+	mutex_unlock(&data->lock);
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static int mpr_read_raw(struct iio_dev *indio_dev,
+	struct iio_chan_spec const *chan, int *val, int *val2, long mask)
+{
+	int ret;
+	s32 pressure;
+	struct mpr_data *data = iio_priv(indio_dev);
+
+	if (chan->type != IIO_PRESSURE)
+		return -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&data->lock);
+		ret = mpr_read_pressure(data, &pressure);
+		mutex_unlock(&data->lock);
+		if (ret < 0)
+			return ret;
+		*val = pressure;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		*val = data->scale;
+		*val2 = data->scale2;
+		return IIO_VAL_INT_PLUS_NANO;
+	case IIO_CHAN_INFO_OFFSET:
+		*val = data->offset;
+		*val2 = data->offset2;
+		return IIO_VAL_INT_PLUS_NANO;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info mpr_info = {
+	.read_raw = &mpr_read_raw,
+};
+
+static int mpr_probe(struct i2c_client *client)
+{
+	int ret;
+	struct mpr_data *data;
+	struct iio_dev *indio_dev;
+	struct device *dev = &client->dev;
+	s64 scale, offset;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BYTE))
+		return dev_err_probe(dev, -EOPNOTSUPP,
+					"I2C functionality not supported\n");
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
+	if (!indio_dev)
+		return dev_err_probe(dev, -ENOMEM, "couldn't get iio_dev\n");
+
+	data = iio_priv(indio_dev);
+	data->client = client;
+	data->irq = client->irq;
+
+	mutex_init(&data->lock);
+	init_completion(&data->completion);
+
+	indio_dev->name = "mprls0025pa";
+	indio_dev->info = &mpr_info;
+	indio_dev->channels = mpr_channels;
+	indio_dev->num_channels = ARRAY_SIZE(mpr_channels);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	ret = devm_regulator_get_enable(dev, "vdd");
+	if (ret)
+		return dev_err_probe(dev, ret,
+				"can't get and enable vdd supply\n");
+
+	if (dev_fwnode(dev)) {
+		ret = device_property_read_u32(dev, "honeywell,pmin-pascal",
+								&data->pmin);
+		if (ret)
+			return dev_err_probe(dev, ret,
+				"honeywell,pmin-pascal could not be read\n");
+		ret = device_property_read_u32(dev, "honeywell,pmax-pascal",
+								&data->pmax);
+		if (ret)
+			return dev_err_probe(dev, ret,
+				"honeywell,pmax-pascal could not be read\n");
+		ret = device_property_read_u32(dev,
+				"honeywell,transfer-function", &data->function);
+		if (ret)
+			return dev_err_probe(dev, ret,
+				"honeywell,transfer-function could not be read\n");
+		if (data->function > MPR_FUNCTION_C)
+			return dev_err_probe(dev, -EINVAL,
+				"honeywell,transfer-function %d invalid\n",
+								data->function);
+	} else {
+		/* when loaded as i2c device we need to use default values */
+		dev_notice(dev, "firmware node not found; using defaults\n");
+		data->pmin = 0;
+		data->pmax = 172369; /* 25 psi */
+		data->function = MPR_FUNCTION_A;
+	}
+
+	data->outmin = mpr_func_spec[data->function].output_min;
+	data->outmax = mpr_func_spec[data->function].output_max;
+
+	/* use 64 bit calculation for preserving a reasonable precision */
+	scale = div_s64(((s64)(data->pmax - data->pmin)) * NANO,
+						data->outmax - data->outmin);
+	data->scale = div_s64_rem(scale, NANO, &data->scale2);
+	/*
+	 * multiply with NANO before dividing by scale and later divide by NANO
+	 * again.
+	 */
+	offset = ((-1LL) * (s64)data->outmin) * NANO -
+			div_s64(div_s64((s64)data->pmin * NANO, scale), NANO);
+	data->offset = div_s64_rem(offset, NANO, &data->offset2);
+
+	if (data->irq > 0) {
+		ret = devm_request_irq(dev, data->irq, mpr_eoc_handler,
+				IRQF_TRIGGER_RISING, client->name, data);
+		if (ret)
+			return dev_err_probe(dev, ret,
+				"request irq %d failed\n", data->irq);
+	}
+
+	data->gpiod_reset = devm_gpiod_get_optional(dev, "reset",
+							GPIOD_OUT_HIGH);
+	if (IS_ERR(data->gpiod_reset))
+		return dev_err_probe(dev, PTR_ERR(data->gpiod_reset),
+						"request reset-gpio failed\n");
+
+	mpr_reset(data);
+
+	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
+						mpr_trigger_handler, NULL);
+	if (ret)
+		return dev_err_probe(dev, ret,
+					"iio triggered buffer setup failed\n");
+
+	ret = devm_iio_device_register(dev, indio_dev);
+	if (ret)
+		return dev_err_probe(dev, ret,
+					"unable to register iio device\n");
+
+	return 0;
+}
+
+static const struct of_device_id mpr_matches[] = {
+	{ .compatible = "honeywell,mprls0025pa" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, mpr_matches);
+
+static const struct i2c_device_id mpr_id[] = {
+	{ "mprls0025pa" },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, mpr_id);
+
+static struct i2c_driver mpr_driver = {
+	.probe		= mpr_probe,
+	.id_table	= mpr_id,
+	.driver		= {
+		.name		= "mprls0025pa",
+		.of_match_table = mpr_matches,
+	},
+};
+module_i2c_driver(mpr_driver);
+
+MODULE_AUTHOR("Andreas Klinger <ak@it-klinger.de>");
+MODULE_DESCRIPTION("Honeywell MPRLS0025PA I2C driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/pressure/ms5611_i2c.c b/drivers/iio/pressure/ms5611_i2c.c
index e3c68a3ed76a..9a0f52321fcb 100644
--- a/drivers/iio/pressure/ms5611_i2c.c
+++ b/drivers/iio/pressure/ms5611_i2c.c
@@ -125,7 +125,7 @@ static struct i2c_driver ms5611_driver = {
 		.of_match_table = ms5611_i2c_matches,
 	},
 	.id_table = ms5611_id,
-	.probe_new = ms5611_i2c_probe,
+	.probe = ms5611_i2c_probe,
 };
 module_i2c_driver(ms5611_driver);
 
diff --git a/drivers/iio/pressure/ms5637.c b/drivers/iio/pressure/ms5637.c
index c4981b29dccb..9b3abffb724b 100644
--- a/drivers/iio/pressure/ms5637.c
+++ b/drivers/iio/pressure/ms5637.c
@@ -238,7 +238,7 @@ static const struct of_device_id ms5637_of_match[] = {
 MODULE_DEVICE_TABLE(of, ms5637_of_match);
 
 static struct i2c_driver ms5637_driver = {
-	.probe_new = ms5637_probe,
+	.probe = ms5637_probe,
 	.id_table = ms5637_id,
 	.driver = {
 		   .name = "ms5637",
diff --git a/drivers/iio/pressure/st_pressure_i2c.c b/drivers/iio/pressure/st_pressure_i2c.c
index f2c3bb568d16..5101552e3f38 100644
--- a/drivers/iio/pressure/st_pressure_i2c.c
+++ b/drivers/iio/pressure/st_pressure_i2c.c
@@ -116,7 +116,7 @@ static struct i2c_driver st_press_driver = {
 		.of_match_table = st_press_of_match,
 		.acpi_match_table = ACPI_PTR(st_press_acpi_match),
 	},
-	.probe_new = st_press_i2c_probe,
+	.probe = st_press_i2c_probe,
 	.id_table = st_press_id_table,
 };
 module_i2c_driver(st_press_driver);
diff --git a/drivers/iio/pressure/t5403.c b/drivers/iio/pressure/t5403.c
index 2fbf14aff033..a6463c06975e 100644
--- a/drivers/iio/pressure/t5403.c
+++ b/drivers/iio/pressure/t5403.c
@@ -260,7 +260,7 @@ static struct i2c_driver t5403_driver = {
 	.driver = {
 		.name	= "t5403",
 	},
-	.probe_new = t5403_probe,
+	.probe = t5403_probe,
 	.id_table = t5403_id,
 };
 module_i2c_driver(t5403_driver);
diff --git a/drivers/iio/pressure/zpa2326_i2c.c b/drivers/iio/pressure/zpa2326_i2c.c
index ade465014be1..c7fffbe7c788 100644
--- a/drivers/iio/pressure/zpa2326_i2c.c
+++ b/drivers/iio/pressure/zpa2326_i2c.c
@@ -76,7 +76,7 @@ static struct i2c_driver zpa2326_i2c_driver = {
 		.of_match_table = zpa2326_i2c_matches,
 		.pm             = ZPA2326_PM_OPS,
 	},
-	.probe_new = zpa2326_probe_i2c,
+	.probe = zpa2326_probe_i2c,
 	.remove   = zpa2326_remove_i2c,
 	.id_table = zpa2326_i2c_ids,
 };
diff --git a/drivers/iio/proximity/isl29501.c b/drivers/iio/proximity/isl29501.c
index 7b8f40b7ccf3..fe45ca35a124 100644
--- a/drivers/iio/proximity/isl29501.c
+++ b/drivers/iio/proximity/isl29501.c
@@ -1008,7 +1008,7 @@ static struct i2c_driver isl29501_driver = {
 		.name	= "isl29501",
 	},
 	.id_table	= isl29501_id,
-	.probe_new	= isl29501_probe,
+	.probe		= isl29501_probe,
 };
 module_i2c_driver(isl29501_driver);
 
diff --git a/drivers/iio/proximity/mb1232.c b/drivers/iio/proximity/mb1232.c
index e70cac8240af..fb1073c8d9f7 100644
--- a/drivers/iio/proximity/mb1232.c
+++ b/drivers/iio/proximity/mb1232.c
@@ -264,7 +264,7 @@ static struct i2c_driver mb1232_driver = {
 		.name	= "maxbotix-mb1232",
 		.of_match_table	= of_mb1232_match,
 	},
-	.probe_new = mb1232_probe,
+	.probe = mb1232_probe,
 	.id_table = mb1232_id,
 };
 module_i2c_driver(mb1232_driver);
diff --git a/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c
index c9eead01a031..2913d5e0fe4f 100644
--- a/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c
+++ b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c
@@ -365,7 +365,7 @@ static struct i2c_driver lidar_driver = {
 		.of_match_table	= lidar_dt_ids,
 		.pm	= pm_ptr(&lidar_pm_ops),
 	},
-	.probe_new	= lidar_probe,
+	.probe		= lidar_probe,
 	.remove		= lidar_remove,
 	.id_table	= lidar_id,
 };
diff --git a/drivers/iio/proximity/rfd77402.c b/drivers/iio/proximity/rfd77402.c
index 44f72b78bd50..f02e83e3f15f 100644
--- a/drivers/iio/proximity/rfd77402.c
+++ b/drivers/iio/proximity/rfd77402.c
@@ -318,7 +318,7 @@ static struct i2c_driver rfd77402_driver = {
 		.name   = RFD77402_DRV_NAME,
 		.pm     = pm_sleep_ptr(&rfd77402_pm_ops),
 	},
-	.probe_new = rfd77402_probe,
+	.probe = rfd77402_probe,
 	.id_table = rfd77402_id,
 };
 
diff --git a/drivers/iio/proximity/srf08.c b/drivers/iio/proximity/srf08.c
index 61866d0440f7..a75ea5042876 100644
--- a/drivers/iio/proximity/srf08.c
+++ b/drivers/iio/proximity/srf08.c
@@ -549,7 +549,7 @@ static struct i2c_driver srf08_driver = {
 		.name	= "srf08",
 		.of_match_table	= of_srf08_match,
 	},
-	.probe_new = srf08_probe,
+	.probe = srf08_probe,
 	.id_table = srf08_id,
 };
 module_i2c_driver(srf08_driver);
diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index 0e4747ccd3cf..d977aacb7491 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -1050,7 +1050,7 @@ static struct i2c_driver sx9310_driver = {
 		 */
 		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
 	},
-	.probe_new	= sx9310_probe,
+	.probe		= sx9310_probe,
 	.id_table	= sx9310_id,
 };
 module_i2c_driver(sx9310_driver);
diff --git a/drivers/iio/proximity/sx9324.c b/drivers/iio/proximity/sx9324.c
index 9a40ca32bb1c..438f9c9aba6e 100644
--- a/drivers/iio/proximity/sx9324.c
+++ b/drivers/iio/proximity/sx9324.c
@@ -1152,7 +1152,7 @@ static struct i2c_driver sx9324_driver = {
 		 */
 		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
 	},
-	.probe_new	= sx9324_probe,
+	.probe		= sx9324_probe,
 	.id_table	= sx9324_id,
 };
 module_i2c_driver(sx9324_driver);
diff --git a/drivers/iio/proximity/sx9360.c b/drivers/iio/proximity/sx9360.c
index a50d9176411a..2c4e14a4fe9f 100644
--- a/drivers/iio/proximity/sx9360.c
+++ b/drivers/iio/proximity/sx9360.c
@@ -896,7 +896,7 @@ static struct i2c_driver sx9360_driver = {
 		 */
 		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
 	},
-	.probe_new	= sx9360_probe,
+	.probe		= sx9360_probe,
 	.id_table	= sx9360_id,
 };
 module_i2c_driver(sx9360_driver);
diff --git a/drivers/iio/proximity/sx9500.c b/drivers/iio/proximity/sx9500.c
index 9b2cfcade6a4..550e7d3cd5ee 100644
--- a/drivers/iio/proximity/sx9500.c
+++ b/drivers/iio/proximity/sx9500.c
@@ -1055,7 +1055,7 @@ static struct i2c_driver sx9500_driver = {
 		.of_match_table = sx9500_of_match,
 		.pm = pm_sleep_ptr(&sx9500_pm_ops),
 	},
-	.probe_new	= sx9500_probe,
+	.probe		= sx9500_probe,
 	.remove		= sx9500_remove,
 	.id_table	= sx9500_id,
 };
diff --git a/drivers/iio/proximity/vcnl3020.c b/drivers/iio/proximity/vcnl3020.c
index cbc8400c773c..d1ddf85f5383 100644
--- a/drivers/iio/proximity/vcnl3020.c
+++ b/drivers/iio/proximity/vcnl3020.c
@@ -662,7 +662,7 @@ static struct i2c_driver vcnl3020_driver = {
 		.name   = "vcnl3020",
 		.of_match_table = vcnl3020_of_match,
 	},
-	.probe_new  = vcnl3020_probe,
+	.probe      = vcnl3020_probe,
 };
 module_i2c_driver(vcnl3020_driver);
 
diff --git a/drivers/iio/proximity/vl53l0x-i2c.c b/drivers/iio/proximity/vl53l0x-i2c.c
index c7c4d33d340f..2cea64bea909 100644
--- a/drivers/iio/proximity/vl53l0x-i2c.c
+++ b/drivers/iio/proximity/vl53l0x-i2c.c
@@ -294,7 +294,7 @@ static struct i2c_driver vl53l0x_driver = {
 		.name = "vl53l0x-i2c",
 		.of_match_table = st_vl53l0x_dt_match,
 	},
-	.probe_new = vl53l0x_probe,
+	.probe = vl53l0x_probe,
 	.id_table = vl53l0x_id,
 };
 module_i2c_driver(vl53l0x_driver);
diff --git a/drivers/iio/temperature/max30208.c b/drivers/iio/temperature/max30208.c
index c85c21474711..48be03852cd8 100644
--- a/drivers/iio/temperature/max30208.c
+++ b/drivers/iio/temperature/max30208.c
@@ -242,7 +242,7 @@ static struct i2c_driver max30208_driver = {
 		.of_match_table = max30208_of_match,
 		.acpi_match_table = max30208_acpi_match,
 	},
-	.probe_new = max30208_probe,
+	.probe = max30208_probe,
 	.id_table = max30208_id_table,
 };
 module_i2c_driver(max30208_driver);
diff --git a/drivers/iio/temperature/mlx90614.c b/drivers/iio/temperature/mlx90614.c
index 909fadb62349..676dc8701924 100644
--- a/drivers/iio/temperature/mlx90614.c
+++ b/drivers/iio/temperature/mlx90614.c
@@ -1,12 +1,15 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * mlx90614.c - Support for Melexis MLX90614 contactless IR temperature sensor
+ * mlx90614.c - Support for Melexis MLX90614/MLX90615 contactless IR temperature sensor
  *
  * Copyright (c) 2014 Peter Meerwald <pmeerw@pmeerw.net>
  * Copyright (c) 2015 Essensium NV
  * Copyright (c) 2015 Melexis
  *
- * Driver for the Melexis MLX90614 I2C 16-bit IR thermopile sensor
+ * Driver for the Melexis MLX90614/MLX90615 I2C 16-bit IR thermopile sensor
+ *
+ * MLX90614 - 17-bit ADC + MLX90302 DSP
+ * MLX90615 - 16-bit ADC + MLX90325 DSP
  *
  * (7-bit I2C slave address 0x5a, 100KHz bus speed only!)
  *
@@ -19,12 +22,13 @@
  * the "wakeup" GPIO is not given, power management will be disabled.
  */
 
+#include <linux/delay.h>
 #include <linux/err.h>
+#include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
-#include <linux/module.h>
-#include <linux/delay.h>
 #include <linux/jiffies.h>
-#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
 #include <linux/pm_runtime.h>
 
 #include <linux/iio/iio.h>
@@ -34,16 +38,9 @@
 #define MLX90614_OP_EEPROM	0x20
 #define MLX90614_OP_SLEEP	0xff
 
-/* RAM offsets with 16-bit data, MSB first */
-#define MLX90614_RAW1	(MLX90614_OP_RAM | 0x04) /* raw data IR channel 1 */
-#define MLX90614_RAW2	(MLX90614_OP_RAM | 0x05) /* raw data IR channel 2 */
-#define MLX90614_TA	(MLX90614_OP_RAM | 0x06) /* ambient temperature */
-#define MLX90614_TOBJ1	(MLX90614_OP_RAM | 0x07) /* object 1 temperature */
-#define MLX90614_TOBJ2	(MLX90614_OP_RAM | 0x08) /* object 2 temperature */
-
-/* EEPROM offsets with 16-bit data, MSB first */
-#define MLX90614_EMISSIVITY	(MLX90614_OP_EEPROM | 0x04) /* emissivity correction coefficient */
-#define MLX90614_CONFIG		(MLX90614_OP_EEPROM | 0x05) /* configuration register */
+#define MLX90615_OP_EEPROM	0x10
+#define MLX90615_OP_RAM		0x20
+#define MLX90615_OP_SLEEP	0xc6
 
 /* Control bits in configuration register */
 #define MLX90614_CONFIG_IIR_SHIFT 0 /* IIR coefficient */
@@ -52,44 +49,61 @@
 #define MLX90614_CONFIG_DUAL_MASK (1 << MLX90614_CONFIG_DUAL_SHIFT)
 #define MLX90614_CONFIG_FIR_SHIFT 8 /* FIR coefficient */
 #define MLX90614_CONFIG_FIR_MASK (0x7 << MLX90614_CONFIG_FIR_SHIFT)
-#define MLX90614_CONFIG_GAIN_SHIFT 11 /* gain */
-#define MLX90614_CONFIG_GAIN_MASK (0x7 << MLX90614_CONFIG_GAIN_SHIFT)
+
+#define MLX90615_CONFIG_IIR_SHIFT 12 /* IIR coefficient */
+#define MLX90615_CONFIG_IIR_MASK (0x7 << MLX90615_CONFIG_IIR_SHIFT)
 
 /* Timings (in ms) */
 #define MLX90614_TIMING_EEPROM 20 /* time for EEPROM write/erase to complete */
 #define MLX90614_TIMING_WAKEUP 34 /* time to hold SDA low for wake-up */
 #define MLX90614_TIMING_STARTUP 250 /* time before first data after wake-up */
 
+#define MLX90615_TIMING_WAKEUP 22 /* time to hold SCL low for wake-up */
+
 #define MLX90614_AUTOSLEEP_DELAY 5000 /* default autosleep delay */
 
 /* Magic constants */
 #define MLX90614_CONST_OFFSET_DEC -13657 /* decimal part of the Kelvin offset */
 #define MLX90614_CONST_OFFSET_REM 500000 /* remainder of offset (273.15*50) */
 #define MLX90614_CONST_SCALE 20 /* Scale in milliKelvin (0.02 * 1000) */
-#define MLX90614_CONST_RAW_EMISSIVITY_MAX 65535 /* max value for emissivity */
-#define MLX90614_CONST_EMISSIVITY_RESOLUTION 15259 /* 1/65535 ~ 0.000015259 */
 #define MLX90614_CONST_FIR 0x7 /* Fixed value for FIR part of low pass filter */
 
+/* Non-constant mask variant of FIELD_GET() and FIELD_PREP() */
+#define field_get(_mask, _reg)	(((_reg) & (_mask)) >> (ffs(_mask) - 1))
+#define field_prep(_mask, _val)	(((_val) << (ffs(_mask) - 1)) & (_mask))
+
+struct mlx_chip_info {
+	/* EEPROM offsets with 16-bit data, MSB first */
+	/* emissivity correction coefficient */
+	u8			op_eeprom_emissivity;
+	u8			op_eeprom_config1;
+	/* RAM offsets with 16-bit data, MSB first */
+	/* ambient temperature */
+	u8			op_ram_ta;
+	/* object 1 temperature */
+	u8			op_ram_tobj1;
+	/* object 2 temperature */
+	u8			op_ram_tobj2;
+	u8			op_sleep;
+	/* support for two input channels (MLX90614 only) */
+	u8			dual_channel;
+	u8			wakeup_delay_ms;
+	u16			emissivity_max;
+	u16			fir_config_mask;
+	u16			iir_config_mask;
+	int			iir_valid_offset;
+	u16			iir_values[8];
+	int			iir_freqs[8][2];
+};
+
 struct mlx90614_data {
 	struct i2c_client *client;
 	struct mutex lock; /* for EEPROM access only */
 	struct gpio_desc *wakeup_gpio; /* NULL to disable sleep/wake-up */
+	const struct mlx_chip_info *chip_info; /* Chip hardware details */
 	unsigned long ready_timestamp; /* in jiffies */
 };
 
-/* Bandwidth values for IIR filtering */
-static const int mlx90614_iir_values[] = {77, 31, 20, 15, 723, 153, 110, 86};
-static const int mlx90614_freqs[][2] = {
-	{0, 150000},
-	{0, 200000},
-	{0, 310000},
-	{0, 770000},
-	{0, 860000},
-	{1, 100000},
-	{1, 530000},
-	{7, 230000}
-};
-
 /*
  * Erase an address and write word.
  * The mutex must be locked before calling.
@@ -129,21 +143,26 @@ static s32 mlx90614_write_word(const struct i2c_client *client, u8 command,
 }
 
 /*
- * Find the IIR value inside mlx90614_iir_values array and return its position
+ * Find the IIR value inside iir_values array and return its position
  * which is equivalent to the bit value in sensor register
  */
 static inline s32 mlx90614_iir_search(const struct i2c_client *client,
 				      int value)
 {
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct mlx90614_data *data = iio_priv(indio_dev);
+	const struct mlx_chip_info *chip_info = data->chip_info;
 	int i;
 	s32 ret;
 
-	for (i = 0; i < ARRAY_SIZE(mlx90614_iir_values); ++i) {
-		if (value == mlx90614_iir_values[i])
+	for (i = chip_info->iir_valid_offset;
+	     i < ARRAY_SIZE(chip_info->iir_values);
+	     i++) {
+		if (value == chip_info->iir_values[i])
 			break;
 	}
 
-	if (i == ARRAY_SIZE(mlx90614_iir_values))
+	if (i == ARRAY_SIZE(chip_info->iir_values))
 		return -EINVAL;
 
 	/*
@@ -151,17 +170,21 @@ static inline s32 mlx90614_iir_search(const struct i2c_client *client,
 	 * we must read them before we actually write
 	 * changes
 	 */
-	ret = i2c_smbus_read_word_data(client, MLX90614_CONFIG);
+	ret = i2c_smbus_read_word_data(client, chip_info->op_eeprom_config1);
 	if (ret < 0)
 		return ret;
 
-	ret &= ~MLX90614_CONFIG_FIR_MASK;
-	ret |= MLX90614_CONST_FIR << MLX90614_CONFIG_FIR_SHIFT;
-	ret &= ~MLX90614_CONFIG_IIR_MASK;
-	ret |= i << MLX90614_CONFIG_IIR_SHIFT;
+	/* Modify FIR on parts which have configurable FIR filter */
+	if (chip_info->fir_config_mask) {
+		ret &= ~chip_info->fir_config_mask;
+		ret |= field_prep(chip_info->fir_config_mask, MLX90614_CONST_FIR);
+	}
+
+	ret &= ~chip_info->iir_config_mask;
+	ret |= field_prep(chip_info->iir_config_mask, i);
 
 	/* Write changed values */
-	ret = mlx90614_write_word(client, MLX90614_CONFIG, ret);
+	ret = mlx90614_write_word(client, chip_info->op_eeprom_config1, ret);
 	return ret;
 }
 
@@ -221,22 +244,26 @@ static int mlx90614_read_raw(struct iio_dev *indio_dev,
 			    int *val2, long mask)
 {
 	struct mlx90614_data *data = iio_priv(indio_dev);
-	u8 cmd;
+	const struct mlx_chip_info *chip_info = data->chip_info;
+	u8 cmd, idx;
 	s32 ret;
 
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW: /* 0.02K / LSB */
 		switch (channel->channel2) {
 		case IIO_MOD_TEMP_AMBIENT:
-			cmd = MLX90614_TA;
+			cmd = chip_info->op_ram_ta;
 			break;
 		case IIO_MOD_TEMP_OBJECT:
+			if (chip_info->dual_channel && channel->channel)
+				return -EINVAL;
+
 			switch (channel->channel) {
 			case 0:
-				cmd = MLX90614_TOBJ1;
+				cmd = chip_info->op_ram_tobj1;
 				break;
 			case 1:
-				cmd = MLX90614_TOBJ2;
+				cmd = chip_info->op_ram_tobj2;
 				break;
 			default:
 				return -EINVAL;
@@ -268,45 +295,48 @@ static int mlx90614_read_raw(struct iio_dev *indio_dev,
 	case IIO_CHAN_INFO_SCALE:
 		*val = MLX90614_CONST_SCALE;
 		return IIO_VAL_INT;
-	case IIO_CHAN_INFO_CALIBEMISSIVITY: /* 1/65535 / LSB */
+	case IIO_CHAN_INFO_CALIBEMISSIVITY: /* 1/emissivity_max / LSB */
 		ret = mlx90614_power_get(data, false);
 		if (ret < 0)
 			return ret;
 
 		mutex_lock(&data->lock);
 		ret = i2c_smbus_read_word_data(data->client,
-					       MLX90614_EMISSIVITY);
+					       chip_info->op_eeprom_emissivity);
 		mutex_unlock(&data->lock);
 		mlx90614_power_put(data);
 
 		if (ret < 0)
 			return ret;
 
-		if (ret == MLX90614_CONST_RAW_EMISSIVITY_MAX) {
+		if (ret == chip_info->emissivity_max) {
 			*val = 1;
 			*val2 = 0;
 		} else {
 			*val = 0;
-			*val2 = ret * MLX90614_CONST_EMISSIVITY_RESOLUTION;
+			*val2 = ret * NSEC_PER_SEC / chip_info->emissivity_max;
 		}
 		return IIO_VAL_INT_PLUS_NANO;
-	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: /* IIR setting with
-							     FIR = 1024 */
+	/* IIR setting with FIR=1024 (MLX90614) or FIR=65536 (MLX90615) */
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
 		ret = mlx90614_power_get(data, false);
 		if (ret < 0)
 			return ret;
 
 		mutex_lock(&data->lock);
-		ret = i2c_smbus_read_word_data(data->client, MLX90614_CONFIG);
+		ret = i2c_smbus_read_word_data(data->client,
+					       chip_info->op_eeprom_config1);
 		mutex_unlock(&data->lock);
 		mlx90614_power_put(data);
 
 		if (ret < 0)
 			return ret;
 
-		*val = mlx90614_iir_values[ret & MLX90614_CONFIG_IIR_MASK] / 100;
-		*val2 = (mlx90614_iir_values[ret & MLX90614_CONFIG_IIR_MASK] % 100) *
-			10000;
+		idx = field_get(chip_info->iir_config_mask, ret) -
+		      chip_info->iir_valid_offset;
+
+		*val = chip_info->iir_values[idx] / 100;
+		*val2 = (chip_info->iir_values[idx] % 100) * 10000;
 		return IIO_VAL_INT_PLUS_MICRO;
 	default:
 		return -EINVAL;
@@ -318,22 +348,23 @@ static int mlx90614_write_raw(struct iio_dev *indio_dev,
 			     int val2, long mask)
 {
 	struct mlx90614_data *data = iio_priv(indio_dev);
+	const struct mlx_chip_info *chip_info = data->chip_info;
 	s32 ret;
 
 	switch (mask) {
-	case IIO_CHAN_INFO_CALIBEMISSIVITY: /* 1/65535 / LSB */
+	case IIO_CHAN_INFO_CALIBEMISSIVITY: /* 1/emissivity_max / LSB */
 		if (val < 0 || val2 < 0 || val > 1 || (val == 1 && val2 != 0))
 			return -EINVAL;
-		val = val * MLX90614_CONST_RAW_EMISSIVITY_MAX +
-			val2 / MLX90614_CONST_EMISSIVITY_RESOLUTION;
+		val = val * chip_info->emissivity_max +
+		      val2 * chip_info->emissivity_max / NSEC_PER_SEC;
 
 		ret = mlx90614_power_get(data, false);
 		if (ret < 0)
 			return ret;
 
 		mutex_lock(&data->lock);
-		ret = mlx90614_write_word(data->client, MLX90614_EMISSIVITY,
-					  val);
+		ret = mlx90614_write_word(data->client,
+					  chip_info->op_eeprom_emissivity, val);
 		mutex_unlock(&data->lock);
 		mlx90614_power_put(data);
 
@@ -377,11 +408,15 @@ static int mlx90614_read_avail(struct iio_dev *indio_dev,
 			       const int **vals, int *type, int *length,
 			       long mask)
 {
+	struct mlx90614_data *data = iio_priv(indio_dev);
+	const struct mlx_chip_info *chip_info = data->chip_info;
+
 	switch (mask) {
 	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
-		*vals = (int *)mlx90614_freqs;
+		*vals = (int *)chip_info->iir_freqs;
 		*type = IIO_VAL_INT_PLUS_MICRO;
-		*length = 2 * ARRAY_SIZE(mlx90614_freqs);
+		*length = 2 * (ARRAY_SIZE(chip_info->iir_freqs) -
+			       chip_info->iir_valid_offset);
 		return IIO_AVAIL_LIST;
 	default:
 		return -EINVAL;
@@ -435,6 +470,7 @@ static const struct iio_info mlx90614_info = {
 #ifdef CONFIG_PM
 static int mlx90614_sleep(struct mlx90614_data *data)
 {
+	const struct mlx_chip_info *chip_info = data->chip_info;
 	s32 ret;
 
 	if (!data->wakeup_gpio) {
@@ -447,7 +483,7 @@ static int mlx90614_sleep(struct mlx90614_data *data)
 	mutex_lock(&data->lock);
 	ret = i2c_smbus_xfer(data->client->adapter, data->client->addr,
 			     data->client->flags | I2C_CLIENT_PEC,
-			     I2C_SMBUS_WRITE, MLX90614_OP_SLEEP,
+			     I2C_SMBUS_WRITE, chip_info->op_sleep,
 			     I2C_SMBUS_BYTE, NULL);
 	mutex_unlock(&data->lock);
 
@@ -456,6 +492,8 @@ static int mlx90614_sleep(struct mlx90614_data *data)
 
 static int mlx90614_wakeup(struct mlx90614_data *data)
 {
+	const struct mlx_chip_info *chip_info = data->chip_info;
+
 	if (!data->wakeup_gpio) {
 		dev_dbg(&data->client->dev, "Wake-up disabled");
 		return -ENOSYS;
@@ -465,7 +503,7 @@ static int mlx90614_wakeup(struct mlx90614_data *data)
 
 	i2c_lock_bus(data->client->adapter, I2C_LOCK_ROOT_ADAPTER);
 	gpiod_direction_output(data->wakeup_gpio, 0);
-	msleep(MLX90614_TIMING_WAKEUP);
+	msleep(chip_info->wakeup_delay_ms);
 	gpiod_direction_input(data->wakeup_gpio);
 	i2c_unlock_bus(data->client->adapter, I2C_LOCK_ROOT_ADAPTER);
 
@@ -478,7 +516,7 @@ static int mlx90614_wakeup(struct mlx90614_data *data)
 	 * If the read fails, the controller will probably be reset so that
 	 * further reads will work.
 	 */
-	i2c_smbus_read_word_data(data->client, MLX90614_CONFIG);
+	i2c_smbus_read_word_data(data->client, chip_info->op_eeprom_config1);
 
 	return 0;
 }
@@ -527,9 +565,15 @@ static inline struct gpio_desc *mlx90614_probe_wakeup(struct i2c_client *client)
 /* Return 0 for single sensor, 1 for dual sensor, <0 on error. */
 static int mlx90614_probe_num_ir_sensors(struct i2c_client *client)
 {
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct mlx90614_data *data = iio_priv(indio_dev);
+	const struct mlx_chip_info *chip_info = data->chip_info;
 	s32 ret;
 
-	ret = i2c_smbus_read_word_data(client, MLX90614_CONFIG);
+	if (chip_info->dual_channel)
+		return 0;
+
+	ret = i2c_smbus_read_word_data(client, chip_info->op_eeprom_config1);
 
 	if (ret < 0)
 		return ret;
@@ -556,6 +600,7 @@ static int mlx90614_probe(struct i2c_client *client)
 	data->client = client;
 	mutex_init(&data->lock);
 	data->wakeup_gpio = mlx90614_probe_wakeup(client);
+	data->chip_info = device_get_match_data(&client->dev);
 
 	mlx90614_wakeup(data);
 
@@ -605,14 +650,68 @@ static void mlx90614_remove(struct i2c_client *client)
 	}
 }
 
+static const struct mlx_chip_info mlx90614_chip_info = {
+	.op_eeprom_emissivity		= MLX90614_OP_EEPROM | 0x04,
+	.op_eeprom_config1		= MLX90614_OP_EEPROM | 0x05,
+	.op_ram_ta			= MLX90614_OP_RAM | 0x06,
+	.op_ram_tobj1			= MLX90614_OP_RAM | 0x07,
+	.op_ram_tobj2			= MLX90614_OP_RAM | 0x08,
+	.op_sleep			= MLX90614_OP_SLEEP,
+	.dual_channel			= true,
+	.wakeup_delay_ms		= MLX90614_TIMING_WAKEUP,
+	.emissivity_max			= 65535,
+	.fir_config_mask		= MLX90614_CONFIG_FIR_MASK,
+	.iir_config_mask		= MLX90614_CONFIG_IIR_MASK,
+	.iir_valid_offset		= 0,
+	.iir_values			= { 77, 31, 20, 15, 723, 153, 110, 86 },
+	.iir_freqs			= {
+		{ 0, 150000 },	/* 13% ~= 0.15 Hz */
+		{ 0, 200000 },	/* 17% ~= 0.20 Hz */
+		{ 0, 310000 },	/* 25% ~= 0.31 Hz */
+		{ 0, 770000 },	/* 50% ~= 0.77 Hz */
+		{ 0, 860000 },	/* 57% ~= 0.86 Hz */
+		{ 1, 100000 },	/* 67% ~= 1.10 Hz */
+		{ 1, 530000 },	/* 80% ~= 1.53 Hz */
+		{ 7, 230000 }	/* 100% ~= 7.23 Hz */
+	},
+};
+
+static const struct mlx_chip_info mlx90615_chip_info = {
+	.op_eeprom_emissivity		= MLX90615_OP_EEPROM | 0x03,
+	.op_eeprom_config1		= MLX90615_OP_EEPROM | 0x02,
+	.op_ram_ta			= MLX90615_OP_RAM | 0x06,
+	.op_ram_tobj1			= MLX90615_OP_RAM | 0x07,
+	.op_ram_tobj2			= MLX90615_OP_RAM | 0x08,
+	.op_sleep			= MLX90615_OP_SLEEP,
+	.dual_channel			= false,
+	.wakeup_delay_ms		= MLX90615_TIMING_WAKEUP,
+	.emissivity_max			= 16383,
+	.fir_config_mask		= 0,	/* MLX90615 FIR is fixed */
+	.iir_config_mask		= MLX90615_CONFIG_IIR_MASK,
+	/* IIR value 0 is FORBIDDEN COMBINATION on MLX90615 */
+	.iir_valid_offset		= 1,
+	.iir_values			= { 500, 50, 30, 20, 15, 13, 10 },
+	.iir_freqs			= {
+		{ 0, 100000 },	/* 14% ~= 0.10 Hz */
+		{ 0, 130000 },	/* 17% ~= 0.13 Hz */
+		{ 0, 150000 },	/* 20% ~= 0.15 Hz */
+		{ 0, 200000 },	/* 25% ~= 0.20 Hz */
+		{ 0, 300000 },	/* 33% ~= 0.30 Hz */
+		{ 0, 500000 },	/* 50% ~= 0.50 Hz */
+		{ 5, 000000 },	/* 100% ~= 5.00 Hz */
+	},
+};
+
 static const struct i2c_device_id mlx90614_id[] = {
-	{ "mlx90614", 0 },
+	{ "mlx90614", .driver_data = (kernel_ulong_t)&mlx90614_chip_info },
+	{ "mlx90615", .driver_data = (kernel_ulong_t)&mlx90615_chip_info },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, mlx90614_id);
 
 static const struct of_device_id mlx90614_of_match[] = {
-	{ .compatible = "melexis,mlx90614" },
+	{ .compatible = "melexis,mlx90614", .data = &mlx90614_chip_info },
+	{ .compatible = "melexis,mlx90615", .data = &mlx90615_chip_info },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, mlx90614_of_match);
@@ -675,7 +774,7 @@ static struct i2c_driver mlx90614_driver = {
 		.of_match_table = mlx90614_of_match,
 		.pm	= pm_ptr(&mlx90614_pm_ops),
 	},
-	.probe_new = mlx90614_probe,
+	.probe = mlx90614_probe,
 	.remove = mlx90614_remove,
 	.id_table = mlx90614_id,
 };
diff --git a/drivers/iio/temperature/mlx90632.c b/drivers/iio/temperature/mlx90632.c
index 753b7a4ccfdd..8a57be108620 100644
--- a/drivers/iio/temperature/mlx90632.c
+++ b/drivers/iio/temperature/mlx90632.c
@@ -1337,7 +1337,7 @@ static struct i2c_driver mlx90632_driver = {
 		.of_match_table = mlx90632_of_match,
 		.pm	= pm_ptr(&mlx90632_pm_ops),
 	},
-	.probe_new = mlx90632_probe,
+	.probe = mlx90632_probe,
 	.id_table = mlx90632_id,
 };
 module_i2c_driver(mlx90632_driver);
diff --git a/drivers/iio/temperature/tmp006.c b/drivers/iio/temperature/tmp006.c
index cdf08477e63f..3a3904fe138c 100644
--- a/drivers/iio/temperature/tmp006.c
+++ b/drivers/iio/temperature/tmp006.c
@@ -15,6 +15,7 @@
 #include <linux/i2c.h>
 #include <linux/delay.h>
 #include <linux/module.h>
+#include <linux/mod_devicetable.h>
 #include <linux/pm.h>
 #include <linux/bitops.h>
 
@@ -272,6 +273,12 @@ static int tmp006_resume(struct device *dev)
 
 static DEFINE_SIMPLE_DEV_PM_OPS(tmp006_pm_ops, tmp006_suspend, tmp006_resume);
 
+static const struct of_device_id tmp006_of_match[] = {
+	{ .compatible = "ti,tmp006" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, tmp006_of_match);
+
 static const struct i2c_device_id tmp006_id[] = {
 	{ "tmp006", 0 },
 	{ }
@@ -281,9 +288,10 @@ MODULE_DEVICE_TABLE(i2c, tmp006_id);
 static struct i2c_driver tmp006_driver = {
 	.driver = {
 		.name	= "tmp006",
+		.of_match_table = tmp006_of_match,
 		.pm	= pm_sleep_ptr(&tmp006_pm_ops),
 	},
-	.probe_new = tmp006_probe,
+	.probe = tmp006_probe,
 	.id_table = tmp006_id,
 };
 module_i2c_driver(tmp006_driver);
diff --git a/drivers/iio/temperature/tmp007.c b/drivers/iio/temperature/tmp007.c
index 8d27aa3bdd6d..decef6896362 100644
--- a/drivers/iio/temperature/tmp007.c
+++ b/drivers/iio/temperature/tmp007.c
@@ -574,7 +574,7 @@ static struct i2c_driver tmp007_driver = {
 		.of_match_table = tmp007_of_match,
 		.pm	= pm_sleep_ptr(&tmp007_pm_ops),
 	},
-	.probe_new	= tmp007_probe,
+	.probe		= tmp007_probe,
 	.id_table	= tmp007_id,
 };
 module_i2c_driver(tmp007_driver);
diff --git a/drivers/iio/temperature/tmp117.c b/drivers/iio/temperature/tmp117.c
index 638e3a5bd6b8..fc02f491688b 100644
--- a/drivers/iio/temperature/tmp117.c
+++ b/drivers/iio/temperature/tmp117.c
@@ -217,7 +217,7 @@ static struct i2c_driver tmp117_driver = {
 		.name	= "tmp117",
 		.of_match_table = tmp117_of_match,
 	},
-	.probe_new	= tmp117_probe,
+	.probe		= tmp117_probe,
 	.id_table	= tmp117_id,
 };
 module_i2c_driver(tmp117_driver);
diff --git a/drivers/iio/temperature/tsys01.c b/drivers/iio/temperature/tsys01.c
index 30b268ba82cc..53ef56fbfe1d 100644
--- a/drivers/iio/temperature/tsys01.c
+++ b/drivers/iio/temperature/tsys01.c
@@ -218,7 +218,7 @@ static const struct of_device_id tsys01_of_match[] = {
 MODULE_DEVICE_TABLE(of, tsys01_of_match);
 
 static struct i2c_driver tsys01_driver = {
-	.probe_new = tsys01_i2c_probe,
+	.probe = tsys01_i2c_probe,
 	.id_table = tsys01_id,
 	.driver = {
 		   .name = "tsys01",
diff --git a/drivers/iio/temperature/tsys02d.c b/drivers/iio/temperature/tsys02d.c
index cdefe046ab17..6191db92ef9a 100644
--- a/drivers/iio/temperature/tsys02d.c
+++ b/drivers/iio/temperature/tsys02d.c
@@ -174,7 +174,7 @@ static const struct i2c_device_id tsys02d_id[] = {
 MODULE_DEVICE_TABLE(i2c, tsys02d_id);
 
 static struct i2c_driver tsys02d_driver = {
-	.probe_new = tsys02d_probe,
+	.probe = tsys02d_probe,
 	.id_table = tsys02d_id,
 	.driver = {
 		   .name = "tsys02d",