Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 185 insertions, 0 deletions

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
new file mode 100644
index 000000000000..e55dee390775
--- /dev/null
+++ b/drivers/input/keyboard/Kconfig
@@ -0,0 +1,185 @@
+#
+# Input core configuration
+#
+menuconfig INPUT_KEYBOARD
+	bool "Keyboards" if EMBEDDED || !X86
+	default y
+	help
+	  Say Y here, and a list of supported keyboards will be displayed.
+	  This option doesn't affect the kernel.
+
+	  If unsure, say Y.
+
+if INPUT_KEYBOARD
+
+config KEYBOARD_ATKBD
+	tristate "AT keyboard" if !PC
+	default y
+	select SERIO
+	select SERIO_LIBPS2
+	select SERIO_I8042 if PC
+	select SERIO_GSCPS2 if GSC
+	help
+	  Say Y here if you want to use a standard AT or PS/2 keyboard. Usually
+	  you'll need this, unless you have a different type keyboard (USB, ADB
+	  or other). This also works for AT and PS/2 keyboards connected over a
+	  PS/2 to serial converter.
+
+	  If unsure, say Y.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called atkbd.
+
+config KEYBOARD_ATKBD_HP_KEYCODES
+	bool "Use HP keyboard scancodes"
+	depends on PARISC && KEYBOARD_ATKBD
+	default y
+	help
+	  Say Y here if you have a PA-RISC machine and want to use an AT or
+	  PS/2 keyboard, and your keyboard uses keycodes that are specific to
+	  PA-RISC keyboards.
+
+	  Say N if you use a standard keyboard.
+
+config KEYBOARD_ATKBD_RDI_KEYCODES
+	bool "Use PrecisionBook keyboard scancodes"
+	depends on KEYBOARD_ATKBD_HP_KEYCODES
+	default n
+	help
+	  If you have an RDI PrecisionBook, say Y here if you want to use its
+	  built-in keyboard (as opposed to an external keyboard).
+
+	  The PrecisionBook has five keys that conflict with those used by most
+	  AT and PS/2 keyboards. These are as follows:
+
+	    PrecisionBook    Standard AT or PS/2
+
+	    F1               F12
+	    Left Ctrl        Left Alt
+	    Caps Lock        Left Ctrl
+	    Right Ctrl       Caps Lock
+	    Left             102nd key (the key to the right of Left Shift)
+
+	  If you say N here, and use the PrecisionBook keyboard, then each key
+	  in the left-hand column will be interpreted as the corresponding key
+	  in the right-hand column.
+
+	  If you say Y here, and use an external keyboard, then each key in the
+	  right-hand column will be interpreted as the key shown in the
+	  left-hand column.
+
+config KEYBOARD_SUNKBD
+	tristate "Sun Type 4 and Type 5 keyboard"
+	select SERIO
+	help
+	  Say Y here if you want to use a Sun Type 4 or Type 5 keyboard,
+	  connected either to the Sun keyboard connector or to an serial
+	  (RS-232) port via a simple adapter.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sunkbd.
+
+config KEYBOARD_LKKBD
+	tristate "DECstation/VAXstation LK201/LK401 keyboard"
+	select SERIO
+	help
+	  Say Y here if you want to use a LK201 or LK401 style serial
+	  keyboard. This keyboard is also useable on PCs if you attach
+	  it with the inputattach program. The connector pinout is
+	  described within lkkbd.c.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called lkkbd.
+
+config KEYBOARD_LOCOMO
+	tristate "LoCoMo Keyboard Support"
+	depends on SHARP_LOCOMO
+	help
+	  Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called locomokbd.
+
+config KEYBOARD_XTKBD
+	tristate "XT keyboard"
+	select SERIO
+	help
+	  Say Y here if you want to use the old IBM PC/XT keyboard (or
+	  compatible) on your system. This is only possible with a
+	  parallel port keyboard adapter, you cannot connect it to the
+	  keyboard port on a PC that runs Linux.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called xtkbd.
+
+config KEYBOARD_NEWTON
+	tristate "Newton keyboard"
+	select SERIO
+	help
+	  Say Y here if you have a Newton keyboard on a serial port.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called newtonkbd.
+
+config KEYBOARD_CORGI
+	tristate "Corgi keyboard"
+	depends on PXA_SHARPSL
+	default y	
+	help
+	  Say Y here to enable the keyboard on the Sharp Zaurus SL-C7xx 
+	  series of PDAs.
+
+	  To compile this driver as a module, choose M here: the 
+	  module will be called corgikbd.
+
+config KEYBOARD_MAPLE
+	tristate "Maple bus keyboard"
+	depends on SH_DREAMCAST && MAPLE
+	help
+	  Say Y here if you have a DreamCast console running Linux and have
+	  a keyboard attached to its Maple bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called maple_keyb.
+
+config KEYBOARD_AMIGA
+	tristate "Amiga keyboard"
+	depends on AMIGA
+	help
+	  Say Y here if you are running Linux on any AMIGA and have a keyboard
+	  attached.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called amikbd.
+
+config KEYBOARD_HIL_OLD
+	tristate "HP HIL keyboard support (simple driver)"
+	depends on GSC
+	default y
+	help
+	  The "Human Interface Loop" is a older, 8-channel USB-like
+	  controller used in several Hewlett Packard models. This driver
+	  was adapted from the one written for m68k/hp300, and implements
+	  support for a keyboard attached to the HIL port, but not for
+	  any other types of HIL input devices like mice or tablets.
+	  However, it has been thoroughly tested and is stable.
+
+	  If you want full HIL support including support for multiple
+	  keyboards, mices and tablets, you have to enable the
+	  "HP System Device Controller i8042 Support" in the input/serio
+	  submenu.
+
+config KEYBOARD_HIL
+	tristate "HP HIL keyboard support"
+	depends on GSC
+	default y
+	select HP_SDC
+	select HIL_MLC
+	select SERIO
+	help
+	  The "Human Interface Loop" is a older, 8-channel USB-like
+	  controller used in several Hewlett Packard models.
+	  This driver implements support for HIL-keyboards attached
+	  to your machine, so normally you should say Y here.
+
+endif