Input: alps - ignore bad data on Dell Latitudes E6440 and E7440

Sometimes on Dell Latitude laptops psmouse/alps driver receive invalid ALPS
protocol V3 packets with bit7 set in last byte. More often it can be
reproduced on Dell Latitude E6440 or E7440 with closed lid and pushing
cover above touchpad.

If bit7 in last packet byte is set then it is not valid ALPS packet. I was
told that ALPS devices never send these packets. It is not know yet who
send those packets, it could be Dell EC, bug in BIOS and also bug in
touchpad firmware...

With this patch alps driver does not process those invalid packets, but
instead of reporting PSMOUSE_BAD_DATA, getting into out of sync state,
getting back in sync with the next byte and spam dmesg we return
PSMOUSE_FULL_PACKET. If driver is truly out of sync we'll fail the checks
on the next byte and report PSMOUSE_BAD_DATA then.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Tested-by: Pali Rohár <pali.rohar@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

1 files changed, 16 insertions, 1 deletions

diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index 433638e7e4af..d125a019383f 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -1186,12 +1186,27 @@ static psmouse_ret_t alps_process_byte(struct psmouse *psmouse)
 	}
 
 	/* Bytes 2 - pktsize should have 0 in the highest bit */
-	if ((priv->proto_version < ALPS_PROTO_V5) &&
+	if (priv->proto_version < ALPS_PROTO_V5 &&
 	    psmouse->pktcnt >= 2 && psmouse->pktcnt <= psmouse->pktsize &&
 	    (psmouse->packet[psmouse->pktcnt - 1] & 0x80)) {
 		psmouse_dbg(psmouse, "refusing packet[%i] = %x\n",
 			    psmouse->pktcnt - 1,
 			    psmouse->packet[psmouse->pktcnt - 1]);
+
+		if (priv->proto_version == ALPS_PROTO_V3 &&
+		    psmouse->pktcnt == psmouse->pktsize) {
+			/*
+			 * Some Dell boxes, such as Latitude E6440 or E7440
+			 * with closed lid, quite often smash last byte of
+			 * otherwise valid packet with 0xff. Given that the
+			 * next packet is very likely to be valid let's
+			 * report PSMOUSE_FULL_PACKET but not process data,
+			 * rather than reporting PSMOUSE_BAD_DATA and
+			 * filling the logs.
+			 */
+			return PSMOUSE_FULL_PACKET;
+		}
+
 		return PSMOUSE_BAD_DATA;
 	}