Merge branch 'next' into for-linus

10 files changed, 827 insertions, 117 deletions

diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
index f996546fc443..f488b6852baf 100644
--- a/drivers/input/mouse/Kconfig
+++ b/drivers/input/mouse/Kconfig
@@ -96,6 +96,16 @@ config MOUSE_PS2_TOUCHKIT
 
 	  If unsure, say N.
 
+config MOUSE_PS2_OLPC
+	bool "OLPC PS/2 mouse protocol extension"
+	depends on MOUSE_PS2 && OLPC
+	help
+	  Say Y here if you have an OLPC XO-1 laptop (with built-in
+	  PS/2 touchpad/tablet device).  The manufacturer calls the
+	  touchpad an HGPK.
+
+	  If unsure, say N.
+
 config MOUSE_SERIAL
 	tristate "Serial mouse"
 	select SERIO
diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile
index d4d202516090..8e6e69097801 100644
--- a/drivers/input/mouse/Makefile
+++ b/drivers/input/mouse/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_MOUSE_GPIO)	+= gpio_mouse.o
 psmouse-objs := psmouse-base.o synaptics.o
 
 psmouse-$(CONFIG_MOUSE_PS2_ALPS)	+= alps.o
+psmouse-$(CONFIG_MOUSE_PS2_OLPC)	+= hgpk.o
 psmouse-$(CONFIG_MOUSE_PS2_LOGIPS2PP)	+= logips2pp.o
 psmouse-$(CONFIG_MOUSE_PS2_LIFEBOOK)	+= lifebook.o
 psmouse-$(CONFIG_MOUSE_PS2_TRACKPOINT)	+= trackpoint.o
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index 385e32bcf6a6..cbedf957cc58 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -54,6 +54,7 @@ static const struct alps_model_info alps_model_data[] = {
 	{ { 0x20, 0x02, 0x0e },	0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* XXX */
 	{ { 0x22, 0x02, 0x0a },	0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT },
 	{ { 0x22, 0x02, 0x14 }, 0xff, 0xff, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude D600 */
+	{ { 0x62, 0x02, 0x14 }, 0xcf, 0xcf, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude E6500 */
 	{ { 0x73, 0x02, 0x50 }, 0xcf, 0xcf, ALPS_FW_BK_1 } /* Dell Vostro 1400 */
 };
 
diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c
index 1f41ae94f26b..079816e6b23b 100644
--- a/drivers/input/mouse/appletouch.c
+++ b/drivers/input/mouse/appletouch.c
@@ -136,12 +136,28 @@ MODULE_DEVICE_TABLE(usb, atp_table);
 #define ATP_GEYSER_MODE_REQUEST_INDEX		0
 #define ATP_GEYSER_MODE_VENDOR_VALUE		0x04
 
+/**
+ * enum atp_status_bits - status bit meanings
+ *
+ * These constants represent the meaning of the status bits.
+ * (only Geyser 3/4)
+ *
+ * @ATP_STATUS_BUTTON: The button was pressed
+ * @ATP_STATUS_BASE_UPDATE: Update of the base values (untouched pad)
+ * @ATP_STATUS_FROM_RESET: Reset previously performed
+ */
+enum atp_status_bits {
+	ATP_STATUS_BUTTON	= BIT(0),
+	ATP_STATUS_BASE_UPDATE	= BIT(2),
+	ATP_STATUS_FROM_RESET	= BIT(4),
+};
+
 /* Structure to hold all of our device specific stuff */
 struct atp {
 	char			phys[64];
 	struct usb_device	*udev;		/* usb device */
 	struct urb		*urb;		/* usb request block */
-	signed char		*data;		/* transferred data */
+	u8			*data;		/* transferred data */
 	struct input_dev	*input;		/* input dev */
 	enum atp_touchpad_type	type;		/* type of touchpad */
 	bool			open;
@@ -251,8 +267,6 @@ static void atp_reinit(struct work_struct *work)
 	int retval;
 
 	dprintk("appletouch: putting appletouch to sleep (reinit)\n");
-	dev->idlecount = 0;
-
 	atp_geyser_init(udev);
 
 	retval = usb_submit_urb(dev->urb, GFP_ATOMIC);
@@ -327,11 +341,14 @@ static inline void atp_report_fingers(struct input_dev *input, int fingers)
 	input_report_key(input, BTN_TOOL_TRIPLETAP, fingers > 2);
 }
 
-static void atp_complete(struct urb *urb)
+/* Check URB status and for correct length of data package */
+
+#define ATP_URB_STATUS_SUCCESS		0
+#define ATP_URB_STATUS_ERROR		1
+#define ATP_URB_STATUS_ERROR_FATAL	2
+
+static int atp_status_check(struct urb *urb)
 {
-	int x, y, x_z, y_z, x_f, y_f;
-	int retval, i, j;
-	int key;
 	struct atp *dev = urb->context;
 
 	switch (urb->status) {
@@ -351,11 +368,12 @@ static void atp_complete(struct urb *urb)
 		/* This urb is terminated, clean up */
 		dbg("atp_complete: urb shutting down with status: %d",
 		    urb->status);
-		return;
+		return ATP_URB_STATUS_ERROR_FATAL;
+
 	default:
 		dbg("atp_complete: nonzero urb status received: %d",
 		    urb->status);
-		goto exit;
+		return ATP_URB_STATUS_ERROR;
 	}
 
 	/* drop incomplete datasets */
@@ -363,30 +381,33 @@ static void atp_complete(struct urb *urb)
 		dprintk("appletouch: incomplete data package"
 			" (first byte: %d, length: %d).\n",
 			dev->data[0], dev->urb->actual_length);
-		goto exit;
+		return ATP_URB_STATUS_ERROR;
 	}
 
-	/* reorder the sensors values */
-	if (dev->type == ATP_GEYSER3 || dev->type == ATP_GEYSER4) {
-		memset(dev->xy_cur, 0, sizeof(dev->xy_cur));
+	return ATP_URB_STATUS_SUCCESS;
+}
 
-		/*
-		 * The values are laid out like this:
-		 * -, Y1, Y2, -, Y3, Y4, -, ..., -, X1, X2, -, X3, X4, ...
-		 * '-' is an unused value.
-		 */
+/*
+ * USB interrupt callback functions
+ */
 
-		/* read X values */
-		for (i = 0, j = 19; i < 20; i += 2, j += 3) {
-			dev->xy_cur[i] = dev->data[j + 1];
-			dev->xy_cur[i + 1] = dev->data[j + 2];
-		}
-		/* read Y values */
-		for (i = 0, j = 1; i < 9; i += 2, j += 3) {
-			dev->xy_cur[ATP_XSENSORS + i] = dev->data[j + 1];
-			dev->xy_cur[ATP_XSENSORS + i + 1] = dev->data[j + 2];
-		}
-	} else if (dev->type == ATP_GEYSER2) {
+/* Interrupt function for older touchpads: FOUNTAIN/GEYSER1/GEYSER2 */
+
+static void atp_complete_geyser_1_2(struct urb *urb)
+{
+	int x, y, x_z, y_z, x_f, y_f;
+	int retval, i, j;
+	int key;
+	struct atp *dev = urb->context;
+	int status = atp_status_check(urb);
+
+	if (status == ATP_URB_STATUS_ERROR_FATAL)
+		return;
+	else if (status == ATP_URB_STATUS_ERROR)
+		goto exit;
+
+	/* reorder the sensors values */
+	if (dev->type == ATP_GEYSER2) {
 		memset(dev->xy_cur, 0, sizeof(dev->xy_cur));
 
 		/*
@@ -427,34 +448,40 @@ static void atp_complete(struct urb *urb)
 		/* first sample */
 		dev->valid = true;
 		dev->x_old = dev->y_old = -1;
+
+		/* Store first sample */
 		memcpy(dev->xy_old, dev->xy_cur, sizeof(dev->xy_old));
 
-		if (dev->size_detect_done ||
-		    dev->type == ATP_GEYSER3) /* No 17" Macbooks (yet) */
-			goto exit;
+		/* Perform size detection, if not done already */
+		if (!dev->size_detect_done) {
+
+			/* 17" Powerbooks have extra X sensors */
+			for (i = (dev->type == ATP_GEYSER2 ? 15 : 16);
+			     i < ATP_XSENSORS; i++) {
+				if (!dev->xy_cur[i])
+					continue;
+
+				printk(KERN_INFO
+					"appletouch: 17\" model detected.\n");
+
+				if (dev->type == ATP_GEYSER2)
+					input_set_abs_params(dev->input, ABS_X,
+							     0,
+							     (20 - 1) *
+							     ATP_XFACT - 1,
+							     ATP_FUZZ, 0);
+				else
+					input_set_abs_params(dev->input, ABS_X,
+							     0,
+							     (26 - 1) *
+							     ATP_XFACT - 1,
+							     ATP_FUZZ, 0);
+				break;
+			}
 
-		/* 17" Powerbooks have extra X sensors */
-		for (i = (dev->type == ATP_GEYSER2 ? 15 : 16);
-		     i < ATP_XSENSORS; i++) {
-			if (!dev->xy_cur[i])
-				continue;
-
-			printk(KERN_INFO "appletouch: 17\" model detected.\n");
-			if (dev->type == ATP_GEYSER2)
-				input_set_abs_params(dev->input, ABS_X, 0,
-						     (20 - 1) *
-						     ATP_XFACT - 1,
-						     ATP_FUZZ, 0);
-			else
-				input_set_abs_params(dev->input, ABS_X, 0,
-						     (ATP_XSENSORS - 1) *
-						     ATP_XFACT - 1,
-						     ATP_FUZZ, 0);
-			break;
+			dev->size_detect_done = 1;
+			goto exit;
 		}
-
-		dev->size_detect_done = 1;
-		goto exit;
 	}
 
 	for (i = 0; i < ATP_XSENSORS + ATP_YSENSORS; i++) {
@@ -475,7 +502,118 @@ static void atp_complete(struct urb *urb)
 			      ATP_XFACT, &x_z, &x_f);
 	y = atp_calculate_abs(dev->xy_acc + ATP_XSENSORS, ATP_YSENSORS,
 			      ATP_YFACT, &y_z, &y_f);
-	key = dev->data[dev->datalen - 1] & 1;
+	key = dev->data[dev->datalen - 1] & ATP_STATUS_BUTTON;
+
+	if (x && y) {
+		if (dev->x_old != -1) {
+			x = (dev->x_old * 3 + x) >> 2;
+			y = (dev->y_old * 3 + y) >> 2;
+			dev->x_old = x;
+			dev->y_old = y;
+
+			if (debug > 1)
+				printk(KERN_DEBUG "appletouch: "
+					"X: %3d Y: %3d Xz: %3d Yz: %3d\n",
+					x, y, x_z, y_z);
+
+			input_report_key(dev->input, BTN_TOUCH, 1);
+			input_report_abs(dev->input, ABS_X, x);
+			input_report_abs(dev->input, ABS_Y, y);
+			input_report_abs(dev->input, ABS_PRESSURE,
+					 min(ATP_PRESSURE, x_z + y_z));
+			atp_report_fingers(dev->input, max(x_f, y_f));
+		}
+		dev->x_old = x;
+		dev->y_old = y;
+
+	} else if (!x && !y) {
+
+		dev->x_old = dev->y_old = -1;
+		input_report_key(dev->input, BTN_TOUCH, 0);
+		input_report_abs(dev->input, ABS_PRESSURE, 0);
+		atp_report_fingers(dev->input, 0);
+
+		/* reset the accumulator on release */
+		memset(dev->xy_acc, 0, sizeof(dev->xy_acc));
+	}
+
+	input_report_key(dev->input, BTN_LEFT, key);
+	input_sync(dev->input);
+
+ exit:
+	retval = usb_submit_urb(dev->urb, GFP_ATOMIC);
+	if (retval)
+		err("atp_complete: usb_submit_urb failed with result %d",
+		    retval);
+}
+
+/* Interrupt function for older touchpads: GEYSER3/GEYSER4 */
+
+static void atp_complete_geyser_3_4(struct urb *urb)
+{
+	int x, y, x_z, y_z, x_f, y_f;
+	int retval, i, j;
+	int key;
+	struct atp *dev = urb->context;
+	int status = atp_status_check(urb);
+
+	if (status == ATP_URB_STATUS_ERROR_FATAL)
+		return;
+	else if (status == ATP_URB_STATUS_ERROR)
+		goto exit;
+
+	/* Reorder the sensors values:
+	 *
+	 * The values are laid out like this:
+	 * -, Y1, Y2, -, Y3, Y4, -, ..., -, X1, X2, -, X3, X4, ...
+	 * '-' is an unused value.
+	 */
+
+	/* read X values */
+	for (i = 0, j = 19; i < 20; i += 2, j += 3) {
+		dev->xy_cur[i] = dev->data[j + 1];
+		dev->xy_cur[i + 1] = dev->data[j + 2];
+	}
+	/* read Y values */
+	for (i = 0, j = 1; i < 9; i += 2, j += 3) {
+		dev->xy_cur[ATP_XSENSORS + i] = dev->data[j + 1];
+		dev->xy_cur[ATP_XSENSORS + i + 1] = dev->data[j + 2];
+	}
+
+	dbg_dump("sample", dev->xy_cur);
+
+	/* Just update the base values (i.e. touchpad in untouched state) */
+	if (dev->data[dev->datalen - 1] & ATP_STATUS_BASE_UPDATE) {
+
+		dprintk(KERN_DEBUG "appletouch: updated base values\n");
+
+		memcpy(dev->xy_old, dev->xy_cur, sizeof(dev->xy_old));
+		goto exit;
+	}
+
+	for (i = 0; i < ATP_XSENSORS + ATP_YSENSORS; i++) {
+		/* calculate the change */
+		dev->xy_acc[i] = dev->xy_cur[i] - dev->xy_old[i];
+
+		/* this is a round-robin value, so couple with that */
+		if (dev->xy_acc[i] > 127)
+			dev->xy_acc[i] -= 256;
+
+		if (dev->xy_acc[i] < -127)
+			dev->xy_acc[i] += 256;
+
+		/* prevent down drifting */
+		if (dev->xy_acc[i] < 0)
+			dev->xy_acc[i] = 0;
+	}
+
+	dbg_dump("accumulator", dev->xy_acc);
+
+	x = atp_calculate_abs(dev->xy_acc, ATP_XSENSORS,
+			      ATP_XFACT, &x_z, &x_f);
+	y = atp_calculate_abs(dev->xy_acc + ATP_XSENSORS, ATP_YSENSORS,
+			      ATP_YFACT, &y_z, &y_f);
+	key = dev->data[dev->datalen - 1] & ATP_STATUS_BUTTON;
 
 	if (x && y) {
 		if (dev->x_old != -1) {
@@ -514,28 +652,27 @@ static void atp_complete(struct urb *urb)
 	input_sync(dev->input);
 
 	/*
-	 * Many Geysers will continue to send packets continually after
+	 * Geysers 3/4 will continue to send packets continually after
 	 * the first touch unless reinitialised. Do so if it's been
 	 * idle for a while in order to avoid waking the kernel up
-	 * several hundred times a second. Re-initialization does not
-	 * work on Fountain touchpads.
+	 * several hundred times a second.
 	 */
-	if (dev->type != ATP_FOUNTAIN) {
-		/*
-		 * Button must not be pressed when entering suspend,
-		 * otherwise we will never release the button.
-		 */
-		if (!x && !y && !key) {
-			dev->idlecount++;
-			if (dev->idlecount == 10) {
-				dev->valid = false;
-				schedule_work(&dev->work);
-				/* Don't resubmit urb here, wait for reinit */
-				return;
-			}
-		} else
+
+	/*
+	 * Button must not be pressed when entering suspend,
+	 * otherwise we will never release the button.
+	 */
+	if (!x && !y && !key) {
+		dev->idlecount++;
+		if (dev->idlecount == 10) {
+			dev->x_old = dev->y_old = -1;
 			dev->idlecount = 0;
-	}
+			schedule_work(&dev->work);
+			/* Don't resubmit urb here, wait for reinit */
+			return;
+		}
+	} else
+		dev->idlecount = 0;
 
  exit:
 	retval = usb_submit_urb(dev->urb, GFP_ATOMIC);
@@ -632,9 +769,19 @@ static int atp_probe(struct usb_interface *iface,
 	if (!dev->data)
 		goto err_free_urb;
 
-	usb_fill_int_urb(dev->urb, udev,
-			 usb_rcvintpipe(udev, int_in_endpointAddr),
-			 dev->data, dev->datalen, atp_complete, dev, 1);
+	/* Select the USB complete (callback) function */
+	if (dev->type == ATP_FOUNTAIN ||
+	    dev->type == ATP_GEYSER1 ||
+	    dev->type == ATP_GEYSER2)
+		usb_fill_int_urb(dev->urb, udev,
+				 usb_rcvintpipe(udev, int_in_endpointAddr),
+				 dev->data, dev->datalen,
+				 atp_complete_geyser_1_2, dev, 1);
+	else
+		usb_fill_int_urb(dev->urb, udev,
+				 usb_rcvintpipe(udev, int_in_endpointAddr),
+				 dev->data, dev->datalen,
+				 atp_complete_geyser_3_4, dev, 1);
 
 	error = atp_handle_geyser(dev);
 	if (error)
@@ -751,8 +898,6 @@ static int atp_suspend(struct usb_interface *iface, pm_message_t message)
 	struct atp *dev = usb_get_intfdata(iface);
 
 	usb_kill_urb(dev->urb);
-	dev->valid = false;
-
 	return 0;
 }
 
diff --git a/drivers/input/mouse/hgpk.c b/drivers/input/mouse/hgpk.c
new file mode 100644
index 000000000000..e82d34201e97
--- /dev/null
+++ b/drivers/input/mouse/hgpk.c
@@ -0,0 +1,477 @@
+/*
+ * OLPC HGPK (XO-1) touchpad PS/2 mouse driver
+ *
+ * Copyright (c) 2006-2008 One Laptop Per Child
+ * Authors:
+ *   Zephaniah E. Hull
+ *   Andres Salomon <dilinger@debian.org>
+ *
+ * This driver is partly based on the ALPS driver, which is:
+ *
+ * Copyright (c) 2003 Neil Brown <neilb@cse.unsw.edu.au>
+ * Copyright (c) 2003-2005 Peter Osterlund <petero2@telia.com>
+ * Copyright (c) 2004 Dmitry Torokhov <dtor@mail.ru>
+ * Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * The spec from ALPS is available from
+ * <http://wiki.laptop.org/go/Touch_Pad/Tablet>.  It refers to this
+ * device as HGPK (Hybrid GS, PT, and Keymatrix).
+ *
+ * The earliest versions of the device had simultaneous reporting; that
+ * was removed.  After that, the device used the Advanced Mode GS/PT streaming
+ * stuff.  That turned out to be too buggy to support, so we've finally
+ * switched to Mouse Mode (which utilizes only the center 1/3 of the touchpad).
+ */
+
+#define DEBUG
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/libps2.h>
+#include <linux/delay.h>
+#include <asm/olpc.h>
+
+#include "psmouse.h"
+#include "hgpk.h"
+
+static int tpdebug;
+module_param(tpdebug, int, 0644);
+MODULE_PARM_DESC(tpdebug, "enable debugging, dumping packets to KERN_DEBUG.");
+
+static int recalib_delta = 100;
+module_param(recalib_delta, int, 0644);
+MODULE_PARM_DESC(recalib_delta,
+	"packets containing a delta this large will cause a recalibration.");
+
+/*
+ * When the touchpad gets ultra-sensitive, one can keep their finger 1/2"
+ * above the pad and still have it send packets.  This causes a jump cursor
+ * when one places their finger on the pad.  We can probably detect the
+ * jump as we see a large deltas (>= 100px).  In mouse mode, I've been
+ * unable to even come close to 100px deltas during normal usage, so I think
+ * this threshold is safe.  If a large delta occurs, trigger a recalibration.
+ */
+static void hgpk_jumpy_hack(struct psmouse *psmouse, int x, int y)
+{
+	struct hgpk_data *priv = psmouse->private;
+
+	if (abs(x) > recalib_delta || abs(y) > recalib_delta) {
+		hgpk_err(psmouse, ">%dpx jump detected (%d,%d)\n",
+				recalib_delta, x, y);
+		/* My car gets forty rods to the hogshead and that's the
+		 * way I likes it! */
+		psmouse_queue_work(psmouse, &priv->recalib_wq,
+				msecs_to_jiffies(1000));
+	}
+}
+
+/*
+ * We have no idea why this particular hardware bug occurs.  The touchpad
+ * will randomly start spewing packets without anything touching the
+ * pad.  This wouldn't necessarily be bad, but it's indicative of a
+ * severely miscalibrated pad; attempting to use the touchpad while it's
+ * spewing means the cursor will jump all over the place, and act "drunk".
+ *
+ * The packets that are spewed tend to all have deltas between -2 and 2, and
+ * the cursor will move around without really going very far.  It will
+ * tend to end up in the same location; if we tally up the changes over
+ * 100 packets, we end up w/ a final delta of close to 0.  This happens
+ * pretty regularly when the touchpad is spewing, and is pretty hard to
+ * manually trigger (at least for *my* fingers).  So, it makes a perfect
+ * scheme for detecting spews.
+ */
+static void hgpk_spewing_hack(struct psmouse *psmouse,
+			      int l, int r, int x, int y)
+{
+	struct hgpk_data *priv = psmouse->private;
+
+	/* ignore button press packets; many in a row could trigger
+	 * a false-positive! */
+	if (l || r)
+		return;
+
+	priv->x_tally += x;
+	priv->y_tally += y;
+
+	if (++priv->count > 100) {
+		if (abs(priv->x_tally) < 3 && abs(priv->y_tally) < 3) {
+			hgpk_dbg(psmouse, "packet spew detected (%d,%d)\n",
+				 priv->x_tally, priv->y_tally);
+			psmouse_queue_work(psmouse, &priv->recalib_wq,
+					   msecs_to_jiffies(1000));
+		}
+		/* reset every 100 packets */
+		priv->count = 0;
+		priv->x_tally = 0;
+		priv->y_tally = 0;
+	}
+}
+
+/*
+ * HGPK Mouse Mode format (standard mouse format, sans middle button)
+ *
+ * byte 0:	y-over	x-over	y-neg	x-neg	1	0	swr	swl
+ * byte 1:	x7	x6	x5	x4	x3	x2	x1	x0
+ * byte 2:	y7	y6	y5	y4	y3	y2	y1	y0
+ *
+ * swr/swl are the left/right buttons.
+ * x-neg/y-neg are the x and y delta negative bits
+ * x-over/y-over are the x and y overflow bits
+ */
+static int hgpk_validate_byte(unsigned char *packet)
+{
+	return (packet[0] & 0x0C) == 0x08;
+}
+
+static void hgpk_process_packet(struct psmouse *psmouse)
+{
+	struct input_dev *dev = psmouse->dev;
+	unsigned char *packet = psmouse->packet;
+	int x, y, left, right;
+
+	left = packet[0] & 1;
+	right = (packet[0] >> 1) & 1;
+
+	x = packet[1] - ((packet[0] << 4) & 0x100);
+	y = ((packet[0] << 3) & 0x100) - packet[2];
+
+	hgpk_jumpy_hack(psmouse, x, y);
+	hgpk_spewing_hack(psmouse, left, right, x, y);
+
+	if (tpdebug)
+		hgpk_dbg(psmouse, "l=%d r=%d x=%d y=%d\n", left, right, x, y);
+
+	input_report_key(dev, BTN_LEFT, left);
+	input_report_key(dev, BTN_RIGHT, right);
+
+	input_report_rel(dev, REL_X, x);
+	input_report_rel(dev, REL_Y, y);
+
+	input_sync(dev);
+}
+
+static psmouse_ret_t hgpk_process_byte(struct psmouse *psmouse)
+{
+	struct hgpk_data *priv = psmouse->private;
+
+	if (hgpk_validate_byte(psmouse->packet)) {
+		hgpk_dbg(psmouse, "%s: (%d) %02x %02x %02x\n",
+				__func__, psmouse->pktcnt, psmouse->packet[0],
+				psmouse->packet[1], psmouse->packet[2]);
+		return PSMOUSE_BAD_DATA;
+	}
+
+	if (psmouse->pktcnt >= psmouse->pktsize) {
+		hgpk_process_packet(psmouse);
+		return PSMOUSE_FULL_PACKET;
+	}
+
+	if (priv->recalib_window) {
+		if (time_before(jiffies, priv->recalib_window)) {
+			/*
+			 * ugh, got a packet inside our recalibration
+			 * window, schedule another recalibration.
+			 */
+			hgpk_dbg(psmouse,
+				 "packet inside calibration window, "
+				 "queueing another recalibration\n");
+			psmouse_queue_work(psmouse, &priv->recalib_wq,
+					msecs_to_jiffies(1000));
+		}
+		priv->recalib_window = 0;
+	}
+
+	return PSMOUSE_GOOD_DATA;
+}
+
+static int hgpk_force_recalibrate(struct psmouse *psmouse)
+{
+	struct ps2dev *ps2dev = &psmouse->ps2dev;
+	struct hgpk_data *priv = psmouse->private;
+
+	/* C-series touchpads added the recalibrate command */
+	if (psmouse->model < HGPK_MODEL_C)
+		return 0;
+
+	/* we don't want to race with the irq handler, nor with resyncs */
+	psmouse_set_state(psmouse, PSMOUSE_INITIALIZING);
+
+	/* start by resetting the device */
+	psmouse_reset(psmouse);
+
+	/* send the recalibrate request */
+	if (ps2_command(ps2dev, NULL, 0xf5) ||
+	    ps2_command(ps2dev, NULL, 0xf5) ||
+	    ps2_command(ps2dev, NULL, 0xe6) ||
+	    ps2_command(ps2dev, NULL, 0xf5)) {
+		return -1;
+	}
+
+	/* according to ALPS, 150mS is required for recalibration */
+	msleep(150);
+
+	/* XXX: If a finger is down during this delay, recalibration will
+	 * detect capacitance incorrectly.  This is a hardware bug, and
+	 * we don't have a good way to deal with it.  The 2s window stuff
+	 * (below) is our best option for now.
+	 */
+
+	if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE))
+		return -1;
+
+	psmouse_set_state(psmouse, PSMOUSE_ACTIVATED);
+
+	/* After we recalibrate, we shouldn't get any packets for 2s.  If
+	 * we do, it's likely that someone's finger was on the touchpad.
+	 * If someone's finger *was* on the touchpad, it's probably
+	 * miscalibrated.  So, we should schedule another recalibration
+	 */
+	priv->recalib_window = jiffies +  msecs_to_jiffies(2000);
+
+	return 0;
+}
+
+/*
+ * This kills power to the touchpad; according to ALPS, current consumption
+ * goes down to 50uA after running this.  To turn power back on, we drive
+ * MS-DAT low.
+ */
+static int hgpk_toggle_power(struct psmouse *psmouse, int enable)
+{
+	struct ps2dev *ps2dev = &psmouse->ps2dev;
+	int timeo;
+
+	/* Added on D-series touchpads */
+	if (psmouse->model < HGPK_MODEL_D)
+		return 0;
+
+	if (enable) {
+		psmouse_set_state(psmouse, PSMOUSE_INITIALIZING);
+
+		/*
+		 * Sending a byte will drive MS-DAT low; this will wake up
+		 * the controller.  Once we get an ACK back from it, it
+		 * means we can continue with the touchpad re-init.  ALPS
+		 * tells us that 1s should be long enough, so set that as
+		 * the upper bound.
+		 */
+		for (timeo = 20; timeo > 0; timeo--) {
+			if (!ps2_sendbyte(&psmouse->ps2dev,
+					PSMOUSE_CMD_DISABLE, 20))
+				break;
+			msleep(50);
+		}
+
+		psmouse_reset(psmouse);
+
+		/* should be all set, enable the touchpad */
+		ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_ENABLE);
+		psmouse_set_state(psmouse, PSMOUSE_ACTIVATED);
+
+	} else {
+		hgpk_dbg(psmouse, "Powering off touchpad.\n");
+		psmouse_set_state(psmouse, PSMOUSE_IGNORE);
+
+		if (ps2_command(ps2dev, NULL, 0xec) ||
+		    ps2_command(ps2dev, NULL, 0xec) ||
+		    ps2_command(ps2dev, NULL, 0xea)) {
+			return -1;
+		}
+
+		/* probably won't see an ACK, the touchpad will be off */
+		ps2_sendbyte(&psmouse->ps2dev, 0xec, 20);
+	}
+
+	return 0;
+}
+
+static int hgpk_poll(struct psmouse *psmouse)
+{
+	/* We can't poll, so always return failure. */
+	return -1;
+}
+
+static int hgpk_reconnect(struct psmouse *psmouse)
+{
+	/* During suspend/resume the ps2 rails remain powered.  We don't want
+	 * to do a reset because it's flush data out of buffers; however,
+	 * earlier prototypes (B1) had some brokenness that required a reset. */
+	if (olpc_board_at_least(olpc_board(0xb2)))
+		if (psmouse->ps2dev.serio->dev.power.power_state.event !=
+				PM_EVENT_ON)
+			return 0;
+
+	psmouse_reset(psmouse);
+
+	return 0;
+}
+
+static ssize_t hgpk_show_powered(struct psmouse *psmouse, void *data, char *buf)
+{
+	struct hgpk_data *priv = psmouse->private;
+
+	return sprintf(buf, "%d\n", priv->powered);
+}
+
+static ssize_t hgpk_set_powered(struct psmouse *psmouse, void *data,
+				const char *buf, size_t count)
+{
+	struct hgpk_data *priv = psmouse->private;
+	unsigned long value;
+	int err;
+
+	err = strict_strtoul(buf, 10, &value);
+	if (err || value > 1)
+		return -EINVAL;
+
+	if (value != priv->powered) {
+		/*
+		 * hgpk_toggle_power will deal w/ state so
+		 * we're not racing w/ irq
+		 */
+		err = hgpk_toggle_power(psmouse, value);
+		if (!err)
+			priv->powered = value;
+	}
+
+	return err ? err : count;
+}
+
+__PSMOUSE_DEFINE_ATTR(powered, S_IWUSR | S_IRUGO, NULL,
+		      hgpk_show_powered, hgpk_set_powered, 0);
+
+static void hgpk_disconnect(struct psmouse *psmouse)
+{
+	struct hgpk_data *priv = psmouse->private;
+
+	device_remove_file(&psmouse->ps2dev.serio->dev,
+			   &psmouse_attr_powered.dattr);
+	psmouse_reset(psmouse);
+	kfree(priv);
+}
+
+static void hgpk_recalib_work(struct work_struct *work)
+{
+	struct delayed_work *w = container_of(work, struct delayed_work, work);
+	struct hgpk_data *priv = container_of(w, struct hgpk_data, recalib_wq);
+	struct psmouse *psmouse = priv->psmouse;
+
+	hgpk_dbg(psmouse, "recalibrating touchpad..\n");
+
+	if (hgpk_force_recalibrate(psmouse))
+		hgpk_err(psmouse, "recalibration failed!\n");
+}
+
+static int hgpk_register(struct psmouse *psmouse)
+{
+	struct input_dev *dev = psmouse->dev;
+	int err;
+
+	/* unset the things that psmouse-base sets which we don't have */
+	__clear_bit(BTN_MIDDLE, dev->keybit);
+
+	/* set the things we do have */
+	__set_bit(EV_KEY, dev->evbit);
+	__set_bit(EV_REL, dev->evbit);
+
+	__set_bit(REL_X, dev->relbit);
+	__set_bit(REL_Y, dev->relbit);
+
+	__set_bit(BTN_LEFT, dev->keybit);
+	__set_bit(BTN_RIGHT, dev->keybit);
+
+	/* register handlers */
+	psmouse->protocol_handler = hgpk_process_byte;
+	psmouse->poll = hgpk_poll;
+	psmouse->disconnect = hgpk_disconnect;
+	psmouse->reconnect = hgpk_reconnect;
+	psmouse->pktsize = 3;
+
+	/* Disable the idle resync. */
+	psmouse->resync_time = 0;
+	/* Reset after a lot of bad bytes. */
+	psmouse->resetafter = 1024;
+
+	err = device_create_file(&psmouse->ps2dev.serio->dev,
+				 &psmouse_attr_powered.dattr);
+	if (err)
+		hgpk_err(psmouse, "Failed to create sysfs attribute\n");
+
+	return err;
+}
+
+int hgpk_init(struct psmouse *psmouse)
+{
+	struct hgpk_data *priv;
+	int err = -ENOMEM;
+
+	priv = kzalloc(sizeof(struct hgpk_data), GFP_KERNEL);
+	if (!priv)
+		goto alloc_fail;
+
+	psmouse->private = priv;
+	priv->psmouse = psmouse;
+	priv->powered = 1;
+	INIT_DELAYED_WORK(&priv->recalib_wq, hgpk_recalib_work);
+
+	err = psmouse_reset(psmouse);
+	if (err)
+		goto init_fail;
+
+	err = hgpk_register(psmouse);
+	if (err)
+		goto init_fail;
+
+	return 0;
+
+init_fail:
+	kfree(priv);
+alloc_fail:
+	return err;
+}
+
+static enum hgpk_model_t hgpk_get_model(struct psmouse *psmouse)
+{
+	struct ps2dev *ps2dev = &psmouse->ps2dev;
+	unsigned char param[3];
+
+	/* E7, E7, E7, E9 gets us a 3 byte identifier */
+	if (ps2_command(ps2dev,  NULL, PSMOUSE_CMD_SETSCALE21) ||
+	    ps2_command(ps2dev,  NULL, PSMOUSE_CMD_SETSCALE21) ||
+	    ps2_command(ps2dev,  NULL, PSMOUSE_CMD_SETSCALE21) ||
+	    ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) {
+		return -EIO;
+	}
+
+	hgpk_dbg(psmouse, "ID: %02x %02x %02x", param[0], param[1], param[2]);
+
+	/* HGPK signature: 0x67, 0x00, 0x<model> */
+	if (param[0] != 0x67 || param[1] != 0x00)
+		return -ENODEV;
+
+	hgpk_info(psmouse, "OLPC touchpad revision 0x%x\n", param[2]);
+
+	return param[2];
+}
+
+int hgpk_detect(struct psmouse *psmouse, int set_properties)
+{
+	int version;
+
+	version = hgpk_get_model(psmouse);
+	if (version < 0)
+		return version;
+
+	if (set_properties) {
+		psmouse->vendor = "ALPS";
+		psmouse->name = "HGPK";
+		psmouse->model = version;
+	}
+
+	return 0;
+}
diff --git a/drivers/input/mouse/hgpk.h b/drivers/input/mouse/hgpk.h
new file mode 100644
index 000000000000..a4b2a96f5f54
--- /dev/null
+++ b/drivers/input/mouse/hgpk.h
@@ -0,0 +1,49 @@
+/*
+ * OLPC HGPK (XO-1) touchpad PS/2 mouse driver
+ */
+
+#ifndef _HGPK_H
+#define _HGPK_H
+
+enum hgpk_model_t {
+	HGPK_MODEL_PREA = 0x0a,	/* pre-B1s */
+	HGPK_MODEL_A = 0x14,	/* found on B1s, PT disabled in hardware */
+	HGPK_MODEL_B = 0x28,	/* B2s, has capacitance issues */
+	HGPK_MODEL_C = 0x3c,
+	HGPK_MODEL_D = 0x50,	/* C1, mass production */
+};
+
+struct hgpk_data {
+	struct psmouse *psmouse;
+	int powered;
+	int count, x_tally, y_tally;	/* hardware workaround stuff */
+	unsigned long recalib_window;
+	struct delayed_work recalib_wq;
+};
+
+#define hgpk_dbg(psmouse, format, arg...)		\
+	dev_dbg(&(psmouse)->ps2dev.serio->dev, format, ## arg)
+#define hgpk_err(psmouse, format, arg...)		\
+	dev_err(&(psmouse)->ps2dev.serio->dev, format, ## arg)
+#define hgpk_info(psmouse, format, arg...)		\
+	dev_info(&(psmouse)->ps2dev.serio->dev, format, ## arg)
+#define hgpk_warn(psmouse, format, arg...)		\
+	dev_warn(&(psmouse)->ps2dev.serio->dev, format, ## arg)
+#define hgpk_notice(psmouse, format, arg...)		\
+	dev_notice(&(psmouse)->ps2dev.serio->dev, format, ## arg)
+
+#ifdef CONFIG_MOUSE_PS2_OLPC
+int hgpk_detect(struct psmouse *psmouse, int set_properties);
+int hgpk_init(struct psmouse *psmouse);
+#else
+static inline int hgpk_detect(struct psmouse *psmouse, int set_properties)
+{
+	return -ENODEV;
+}
+static inline int hgpk_init(struct psmouse *psmouse)
+{
+	return -ENODEV;
+}
+#endif
+
+#endif
diff --git a/drivers/input/mouse/logips2pp.c b/drivers/input/mouse/logips2pp.c
index 0c5660d28caa..390f1dbb98a4 100644
--- a/drivers/input/mouse/logips2pp.c
+++ b/drivers/input/mouse/logips2pp.c
@@ -157,10 +157,8 @@ static ssize_t ps2pp_attr_show_smartscroll(struct psmouse *psmouse, void *data,
 static ssize_t ps2pp_attr_set_smartscroll(struct psmouse *psmouse, void *data, const char *buf, size_t count)
 {
 	unsigned long value;
-	char *rest;
 
-	value = simple_strtoul(buf, &rest, 10);
-	if (*rest || value > 1)
+	if (strict_strtoul(buf, 10, &value) || value > 1)
 		return -EINVAL;
 
 	ps2pp_set_smartscroll(psmouse, value);
diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
index f5a6be1d3c46..126e977e199e 100644
--- a/drivers/input/mouse/psmouse-base.c
+++ b/drivers/input/mouse/psmouse-base.c
@@ -25,6 +25,7 @@
 #include "synaptics.h"
 #include "logips2pp.h"
 #include "alps.h"
+#include "hgpk.h"
 #include "lifebook.h"
 #include "trackpoint.h"
 #include "touchkit_ps2.h"
@@ -201,6 +202,12 @@ static psmouse_ret_t psmouse_process_byte(struct psmouse *psmouse)
 	return PSMOUSE_FULL_PACKET;
 }
 
+void psmouse_queue_work(struct psmouse *psmouse, struct delayed_work *work,
+		unsigned long delay)
+{
+	queue_delayed_work(kpsmoused_wq, work, delay);
+}
+
 /*
  * __psmouse_set_state() sets new psmouse state and resets all flags.
  */
@@ -220,7 +227,7 @@ static inline void __psmouse_set_state(struct psmouse *psmouse, enum psmouse_sta
  * is not a concern.
  */
 
-static void psmouse_set_state(struct psmouse *psmouse, enum psmouse_state new_state)
+void psmouse_set_state(struct psmouse *psmouse, enum psmouse_state new_state)
 {
 	serio_pause_rx(psmouse->ps2dev.serio);
 	__psmouse_set_state(psmouse, new_state);
@@ -305,7 +312,7 @@ static irqreturn_t psmouse_interrupt(struct serio *serio,
 		       psmouse->name, psmouse->phys, psmouse->pktcnt);
 		psmouse->badbyte = psmouse->packet[0];
 		__psmouse_set_state(psmouse, PSMOUSE_RESYNCING);
-		queue_work(kpsmoused_wq, &psmouse->resync_work);
+		psmouse_queue_work(psmouse, &psmouse->resync_work, 0);
 		goto out;
 	}
 
@@ -342,7 +349,7 @@ static irqreturn_t psmouse_interrupt(struct serio *serio,
 	    time_after(jiffies, psmouse->last + psmouse->resync_time * HZ)) {
 		psmouse->badbyte = psmouse->packet[0];
 		__psmouse_set_state(psmouse, PSMOUSE_RESYNCING);
-		queue_work(kpsmoused_wq, &psmouse->resync_work);
+		psmouse_queue_work(psmouse, &psmouse->resync_work, 0);
 		goto out;
 	}
 
@@ -630,8 +637,20 @@ static int psmouse_extensions(struct psmouse *psmouse,
 		}
 	}
 
-	if (max_proto > PSMOUSE_IMEX) {
+/*
+ * Try OLPC HGPK touchpad.
+ */
+	if (max_proto > PSMOUSE_IMEX &&
+			hgpk_detect(psmouse, set_properties) == 0) {
+		if (!set_properties || hgpk_init(psmouse) == 0)
+			return PSMOUSE_HGPK;
+/*
+ * Init failed, try basic relative protocols
+ */
+		max_proto = PSMOUSE_IMEX;
+	}
 
+	if (max_proto > PSMOUSE_IMEX) {
 		if (genius_detect(psmouse, set_properties) == 0)
 			return PSMOUSE_GENPS;
 
@@ -762,6 +781,14 @@ static const struct psmouse_protocol psmouse_protocols[] = {
 		.detect		= touchkit_ps2_detect,
 	},
 #endif
+#ifdef CONFIG_MOUSE_PS2_OLPC
+	{
+		.type		= PSMOUSE_HGPK,
+		.name		= "OLPC HGPK",
+		.alias		= "hgpk",
+		.detect		= hgpk_detect,
+	},
+#endif
 	{
 		.type		= PSMOUSE_CORTRON,
 		.name		= "CortronPS/2",
@@ -935,7 +962,7 @@ static int psmouse_poll(struct psmouse *psmouse)
 static void psmouse_resync(struct work_struct *work)
 {
 	struct psmouse *parent = NULL, *psmouse =
-		container_of(work, struct psmouse, resync_work);
+		container_of(work, struct psmouse, resync_work.work);
 	struct serio *serio = psmouse->ps2dev.serio;
 	psmouse_ret_t rc = PSMOUSE_GOOD_DATA;
 	int failed = 0, enabled = 0;
@@ -1194,7 +1221,7 @@ static int psmouse_connect(struct serio *serio, struct serio_driver *drv)
 		goto err_free;
 
 	ps2_init(&psmouse->ps2dev, serio);
-	INIT_WORK(&psmouse->resync_work, psmouse_resync);
+	INIT_DELAYED_WORK(&psmouse->resync_work, psmouse_resync);
 	psmouse->dev = input_dev;
 	snprintf(psmouse->phys, sizeof(psmouse->phys), "%s/input0", serio->phys);
 
@@ -1395,25 +1422,29 @@ ssize_t psmouse_attr_set_helper(struct device *dev, struct device_attribute *dev
 
 	psmouse = serio_get_drvdata(serio);
 
-	if (psmouse->state == PSMOUSE_IGNORE) {
-		retval = -ENODEV;
-		goto out_unlock;
-	}
+	if (attr->protect) {
+		if (psmouse->state == PSMOUSE_IGNORE) {
+			retval = -ENODEV;
+			goto out_unlock;
+		}
 
-	if (serio->parent && serio->id.type == SERIO_PS_PSTHRU) {
-		parent = serio_get_drvdata(serio->parent);
-		psmouse_deactivate(parent);
-	}
+		if (serio->parent && serio->id.type == SERIO_PS_PSTHRU) {
+			parent = serio_get_drvdata(serio->parent);
+			psmouse_deactivate(parent);
+		}
 
-	psmouse_deactivate(psmouse);
+		psmouse_deactivate(psmouse);
+	}
 
 	retval = attr->set(psmouse, attr->data, buf, count);
 
-	if (retval != -ENODEV)
-		psmouse_activate(psmouse);
+	if (attr->protect) {
+		if (retval != -ENODEV)
+			psmouse_activate(psmouse);
 
-	if (parent)
-		psmouse_activate(parent);
+		if (parent)
+			psmouse_activate(parent);
+	}
 
  out_unlock:
 	mutex_unlock(&psmouse_mutex);
@@ -1433,10 +1464,8 @@ static ssize_t psmouse_set_int_attr(struct psmouse *psmouse, void *offset, const
 {
 	unsigned int *field = (unsigned int *)((char *)psmouse + (size_t)offset);
 	unsigned long value;
-	char *rest;
 
-	value = simple_strtoul(buf, &rest, 10);
-	if (*rest)
+	if (strict_strtoul(buf, 10, &value))
 		return -EINVAL;
 
 	if ((unsigned int)value != value)
@@ -1549,10 +1578,8 @@ static ssize_t psmouse_attr_set_protocol(struct psmouse *psmouse, void *data, co
 static ssize_t psmouse_attr_set_rate(struct psmouse *psmouse, void *data, const char *buf, size_t count)
 {
 	unsigned long value;
-	char *rest;
 
-	value = simple_strtoul(buf, &rest, 10);
-	if (*rest)
+	if (strict_strtoul(buf, 10, &value))
 		return -EINVAL;
 
 	psmouse->set_rate(psmouse, value);
@@ -1562,10 +1589,8 @@ static ssize_t psmouse_attr_set_rate(struct psmouse *psmouse, void *data, const
 static ssize_t psmouse_attr_set_resolution(struct psmouse *psmouse, void *data, const char *buf, size_t count)
 {
 	unsigned long value;
-	char *rest;
 
-	value = simple_strtoul(buf, &rest, 10);
-	if (*rest)
+	if (strict_strtoul(buf, 10, &value))
 		return -EINVAL;
 
 	psmouse->set_resolution(psmouse, value);
diff --git a/drivers/input/mouse/psmouse.h b/drivers/input/mouse/psmouse.h
index 1317bdd8cc7c..8b608a1cdd12 100644
--- a/drivers/input/mouse/psmouse.h
+++ b/drivers/input/mouse/psmouse.h
@@ -39,7 +39,7 @@ struct psmouse {
 	void *private;
 	struct input_dev *dev;
 	struct ps2dev ps2dev;
-	struct work_struct resync_work;
+	struct delayed_work resync_work;
 	char *vendor;
 	char *name;
 	unsigned char packet[8];
@@ -89,20 +89,24 @@ enum psmouse_type {
 	PSMOUSE_TRACKPOINT,
 	PSMOUSE_TOUCHKIT_PS2,
 	PSMOUSE_CORTRON,
+	PSMOUSE_HGPK,
 	PSMOUSE_AUTO		/* This one should always be last */
 };
 
+void psmouse_queue_work(struct psmouse *psmouse, struct delayed_work *work,
+		unsigned long delay);
 int psmouse_sliced_command(struct psmouse *psmouse, unsigned char command);
 int psmouse_reset(struct psmouse *psmouse);
+void psmouse_set_state(struct psmouse *psmouse, enum psmouse_state new_state);
 void psmouse_set_resolution(struct psmouse *psmouse, unsigned int resolution);
 
-
 struct psmouse_attribute {
 	struct device_attribute dattr;
 	void *data;
 	ssize_t (*show)(struct psmouse *psmouse, void *data, char *buf);
 	ssize_t (*set)(struct psmouse *psmouse, void *data,
 			const char *buf, size_t count);
+	int protect;
 };
 #define to_psmouse_attr(a)	container_of((a), struct psmouse_attribute, dattr)
 
@@ -111,7 +115,7 @@ ssize_t psmouse_attr_show_helper(struct device *dev, struct device_attribute *at
 ssize_t psmouse_attr_set_helper(struct device *dev, struct device_attribute *attr,
 				const char *buf, size_t count);
 
-#define PSMOUSE_DEFINE_ATTR(_name, _mode, _data, _show, _set)			\
+#define __PSMOUSE_DEFINE_ATTR(_name, _mode, _data, _show, _set, _protect)	\
 static ssize_t _show(struct psmouse *, void *data, char *);			\
 static ssize_t _set(struct psmouse *, void *data, const char *, size_t);	\
 static struct psmouse_attribute psmouse_attr_##_name = {			\
@@ -126,6 +130,10 @@ static struct psmouse_attribute psmouse_attr_##_name = {			\
 	.data	= _data,							\
 	.show	= _show,							\
 	.set	= _set,								\
+	.protect = _protect,							\
 }
 
+#define PSMOUSE_DEFINE_ATTR(_name, _mode, _data, _show, _set)	\
+		__PSMOUSE_DEFINE_ATTR(_name, _mode, _data, _show, _set, 1)
+
 #endif /* _PSMOUSE_H */
diff --git a/drivers/input/mouse/trackpoint.c b/drivers/input/mouse/trackpoint.c
index 26b845fc186a..e68c814c4361 100644
--- a/drivers/input/mouse/trackpoint.c
+++ b/drivers/input/mouse/trackpoint.c
@@ -89,10 +89,8 @@ static ssize_t trackpoint_set_int_attr(struct psmouse *psmouse, void *data,
 	struct trackpoint_attr_data *attr = data;
 	unsigned char *field = (unsigned char *)((char *)tp + attr->field_offset);
 	unsigned long value;
-	char *rest;
 
-	value = simple_strtoul(buf, &rest, 10);
-	if (*rest || value > 255)
+	if (strict_strtoul(buf, 10, &value) || value > 255)
 		return -EINVAL;
 
 	*field = value;
@@ -117,10 +115,8 @@ static ssize_t trackpoint_set_bit_attr(struct psmouse *psmouse, void *data,
 	struct trackpoint_attr_data *attr = data;
 	unsigned char *field = (unsigned char *)((char *)tp + attr->field_offset);
 	unsigned long value;
-	char *rest;
 
-	value = simple_strtoul(buf, &rest, 10);
-	if (*rest || value > 1)
+	if (strict_strtoul(buf, 10, &value) || value > 1)
 		return -EINVAL;
 
 	if (attr->inverted)